Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Technical Data Package Development and Submission

Active

Federal

Response Deadline07/30/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract entails the development and submission of complete technical data packages for both approved and alternate configurations of a voltage regulator set, requiring comprehensive engineering documentation and active management of change proposals. This effort must support precise technical compliance and configuration control throughout the lifecycle of the system, ensuring all data meets required standards for review and approval. The work is classified as a subcontract under a Total Small Business Set-Aside, with the NAICS code 541330 indicating engineering services, and is issued by the Department of Defense through the Maritime Supply Chain organization. The solicitation was posted on July 27, 2026, with a rigid response deadline of July 30, 2026, indicating a tightly constrained bidding window. The performance location is specified as Tracy, California, with a ZIP code of 95304-5000, and all deliverables must align with federal contracting requirements for technical data submission. All parties involved must be certified small businesses, as the set-aside is designated exclusively for small business concerns under FAR 19.5, and the contract is administered through the DLA’s DIBBS platform for sourcing and compliance.

General Info

Small business subcontract to develop voltage regulator technical data packages for DoD in Tracy, CA, with strict July 30, 2026 deadline.

Agency

Department Of Defense → MARITIME SUPPLY CHAINView Agency

NAICS

541330 - Engineering ServicesView NAICS

Place of Performance

TRACY, CA, 95304-5000, US

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 27

subcontract

Response DeadlineJul 30

Submission deadline

Response Deadline

07/30/2026, 05:00:00 PM UTCin 2 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → MARITIME SUPPLY CHAIN

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → MARITIME SUPPLY CHAIN

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Creation and submission of complete technical data packages for both approved and alternate configurations of the voltage regulator set, including engineering documentation and change proposal management.

Similar Contracts

Same NAICS industry code

Construction Management Services IDIQThe Port of Seattle is seeking qualified firms to provide Construction Management services under an Indefinite-Delivery, Indefinite-Quantity contract for major construction projects across multiple delivery methods including Design Build, Progressive Design Build, and other alternative delivery models. The scope encompasses full lifecycle support from planning and design through construction and closeout, ensuring projects adhere to authorized schedules, budgets, and quality standards. This IDIQ will enable the Port to rapidly mobilize expert CM resources as new project opportunities arise without requiring separate solicitations for each engagement. Services will be performed at various locations within the Port’s jurisdiction, with primary point of contact being Hala Rabbo, and project management coordination handled by Ann Davidson. The contract is classified under NAICS code 541330 for Architectural, Engineering, and Related Services, and is forecasted for release in July 2026. Interested parties should note that while the solicitation number and set-aside details are not yet available, the procurement is intended to establish a long-term framework for ongoing construction management support across the Port’s capital improvement programs.

Construction Management

POSTED

about 7 hours ago

DEADLINE

Retro-Commissioning, TAB, Controls, and Regulatory Support IDIQThe consultant will deliver retro-commissioning, test/adjust/balance, controls, and regulatory support services across the extensive facilities and infrastructure systems at Seattle-Tacoma International Airport, operating within a high-stakes, nonstop 24/7/365 environment. The scope centers on diagnosing and correcting performance gaps in mechanical, HVAC, plumbing, lighting, Direct Digital Controls, smoke control, and fire protection systems to enhance efficiency, reliability, occupant comfort, and system longevity, while ensuring compliance with all safety and regulatory mandates. Work is structured around Service Directives issued by Aviation Facilities and Infrastructure and executed in close coordination with Port of Seattle staff to meet defined deliverables and operational continuity goals. The contract is an Indefinite Delivery/Indefinite Quantity vehicle under NAICS code 541330, issued by the Port of Seattle’s Aviation Facilities and Infrastructure division. Primary point of contact is Jason Gates, with Jim Farris serving as Project Manager, both reachable through dedicated phone lines and email addresses. All work is to be performed at the airport premises, and while the solicitation was posted in 2026, no set-aside details or funding caps are specified, indicating the potential for ongoing, scalable engagement based on facility needs. The procurement is not yet active, providing early visibility to interested parties ahead of eventual release.

Aviation Facilities & Infrastructure

POSTED

about 7 hours ago

DEADLINE

Field Inspection and Quality Verification ServicesTexas Department of Transportation is seeking qualified contractors to perform independent field inspections and compliance verification of repaired crash cushions to ensure proper alignment, structural integrity, and adherence to TxDOT and MASH safety standards. The work involves on-site evaluation of installed or refurbished crash cushions to confirm they meet all required engineering and safety criteria prior to reactivation or final acceptance. This subcontract opportunity is open to eligible parties who can demonstrate technical expertise in transportation safety systems and experience with state and national highway safety protocols. Bids must be submitted by August 18, 2026, at 4:30 PM Central Time, with the solicitation posted on July 27, 2026. The contract falls under NAICS code 541330 for engineering services and is classified as a subcontract under TxDOT’s procurement framework. Performance is expected to occur across Texas roadways where repaired crash cushions are deployed, though specific locations are not detailed in the posting. Interested parties should review the full solicitation details through the provided Texas SmartBuy link to understand evaluation criteria, reporting requirements, and submission guidelines.

Texas Department of Transportation

POSTED

about 18 hours ago

DEADLINE

Quality Control and Submittal ManagementThe contract entails the coordination and preparation of shop drawings, product data, and samples for review and approval by the Architect/Engineer to ensure strict adherence to project specifications. This work is critical for maintaining compliance throughout the construction process and requires meticulous attention to detail, timely submission, and alignment with design intent and regulatory standards. The contractor is responsible for managing the entire submittal workflow, from initial preparation through final approval, ensuring all documentation meets the required quality and technical criteria. The solicitation is a subcontract for Quality Control and Submittal Management under NAICS code 541330, posted on July 27, 2026, with a response deadline of August 19, 2026. It is issued by the State of Utah and is open for proposals through the BonfireHub platform. The place of performance and specific office address are not detailed, but the work relates to projects under Utah’s jurisdiction. There is no set-aside designation or point of contact provided, and bidders must adhere to the outlined scope without additional guidance beyond the stated requirements.

POSTED

about 19 hours ago

DEADLINE

As-Built Record DocumentationThe contract titled As-Built Record Documentation requires the submission of updated as-built drawings and technical specifications that accurately reflect the final installed conditions of a project. This subcontract is focused on ensuring that all documentation aligns with the actual constructed state, capturing deviations, modifications, and final installations that may differ from original plans. The work involves meticulous field verification, data collection, and clear presentation of updated records to serve as a reliable reference for future maintenance, renovations, or regulatory compliance. The opportunity was posted on July 27, 2026, with a response deadline of August 26, 2026, and is categorized under NAICS code 541330, which pertains to architectural and engineering services. The contracting agency is the State of Utah, with no specific office address or point of contact provided. The place of performance details are not specified, indicating that the work may be project-specific and location-dependent. Subcontractors must be prepared to deliver precise, high-quality documentation in accordance with state standards and timelines.

POSTED

about 19 hours ago

DEADLINE

Shop Drawing and Submittal PreparationThe contract seeks specialized support for the preparation and submission of shop drawings, product data, and physical samples required for approval by architectural and engineering authorities. This work is critical to ensuring that materials, components, and systems align with project specifications and regulatory standards before implementation. The contractor is expected to coordinate closely with design teams to produce accurate, compliant, and timely submittals that meet rigorous technical requirements and deadlines. The opportunity is classified as a subcontract under NAICS code 541330, indicating it falls within architectural and engineering services. It was posted on July 27, 2026, with a response deadline of August 26, 2026, and is associated with the state of Utah, though specific location or office details are not provided. The solicitation is accessible via a public online portal, with no set-aside provisions indicated, meaning all qualified entities may respond without demographic or size-based restrictions.

POSTED

about 19 hours ago

DEADLINE

REQUEST FOR QUALIFICATIONS (RFQ) PROFESSIONAL ON-CALL AIRPORT ENGINEERING, ARCHITECTURAL & CONSTRUThe City of Swainsboro and the East Georgia Regional Airport Authority are soliciting qualified aviation consulting firms to provide on-call professional services in support of the Airport Capital Improvement Plan at the East Georgia Regional Airport in Swainsboro, Georgia. The scope of work encompasses a full range of engineering, architectural, and construction inspection/administration services including project planning, geotechnical and subsurface investigations, topographic surveying, environmental assessments, preliminary and final design, bidding support, and construction phase oversight. Services are expected to be provided as needed across multiple projects under the capital improvement plan, requiring firms to demonstrate expertise in airport-specific infrastructure, regulatory compliance, and federal aviation standards. Proposals must be submitted by the deadline of August 13, 2026, and the solicitation is open under the identification number PE-66723-NONST-2026-000000020. Interested firms should direct inquiries to Jerry Cadle at Jerry@cadlelawfirm.com, the designated point of contact. While the solicitation does not specify a set-aside or NAICS code, it is issued by a state and local government entity and requires responders to prove capability in delivering high-quality, compliance-driven aviation consulting services within the unique context of municipal airport development. Performance is expected to occur at the East Georgia Regional Airport in Georgia, with the selected firm required to maintain flexibility and responsiveness to meet the evolving needs of the airport’s capital improvement initiatives.

City of Swainsboro

POSTED

about 20 hours ago

DEADLINE

Fire Alarm System Inspection & Testing ServicesThe contract requires the performance of NFPA 72-compliant inspection and testing of fire alarm control panels and all associated devices across multiple facilities operated by Dallas Area Rapid Transit. The work is focused on ensuring full regulatory compliance and operational reliability of fire alarm systems throughout the transit system’s infrastructure. Contractors must demonstrate technical expertise in inspecting, testing, and documenting the functionality of alarm panels, initiating devices, notification appliances, and related components in accordance with the latest edition of NFPA 72 standards. This subcontract is open for response until August 4, 2026, with the solicitation posted on July 27, 2026. The NAICS code 541330 indicates that the work falls under architectural, engineering, and related services, with performance required at DART facilities across Texas. While specific locations and point of contact details are not provided, the scope demands consistent adherence to code, thorough documentation of findings, and timely remediation of any deficiencies identified during inspections. Contractors must be prepared to work on-site across multiple locations and maintain full compliance with all applicable fire safety regulations.

Dallas Area Rapid Transit

POSTED

about 21 hours ago

DEADLINE

Structural Design and Engineering ServicesThe contract encompasses the full scope of engineering and design services for a custom outdoor structure, requiring detailed CAD modeling, thorough structural analysis, and the creation of comprehensive construction drawings that comply with all applicable safety and environmental regulations. The work must be executed to ensure structural integrity and long-term resilience under real-world conditions, with all deliverables aligned to industry best practices and regulatory requirements. This is a subcontract opportunity under NAICS code 541330, issued by DFW International Airport in Texas, with a very tight submission window opening on July 27, 2026, and closing just three days later on July 30, 2026. The place of performance and specific location details are not provided, but the project is tied to airport infrastructure, suggesting stringent compliance standards and potential coordination with operational authorities. Interested parties must respond promptly as the deadline is approaching rapidly and no set-aside provisions are specified for small businesses or other categories.

Dfw International Airport

POSTED

about 21 hours ago

DEADLINE

First Article Testing & Quality Certification ServicesThe contract requires independent execution and comprehensive documentation of First Article Testing in strict accordance with DI-NDTI-80809B, encompassing detailed inspection, precise measurement, and formal reporting to the Defense Logistics Agency. This work must be performed with full adherence to quality assurance standards and delivered results that validate compliance with technical specifications for defense-related components or systems. All testing activities, methodologies, and outcomes must be thoroughly recorded and submitted to DLA for review and certification. This subcontract, issued under a Total Small Business Set-Aside, is classified under NAICS code 541330 and is targeted exclusively at small businesses. The performance location and detailed office address are unspecified, but the contracting entity is the ASC Commodities Division within the Department of Defense. The solicitation was posted on July 27, 2026, with a firm response deadline of August 7, 2026, allowing interested small businesses to submit proposals through the DIBBS platform. The requirement emphasizes accuracy, traceability, and regulatory compliance in delivering first article quality certification.

ASC COMMODITIES DIVISION

POSTED

about 23 hours ago

DEADLINE

Quality Inspection and Conformance ServicesThe contract requires comprehensive quality inspection and conformance testing of shear bolts using zero-defect sampling plans aligned with MIL-STD-1916 or ASQ H1331 standards, ensuring rigorous adherence to defect-free criteria throughout production. Full documentation of all testing procedures, results, and compliance records must be maintained and provided as part of delivery, leaving no room for ambiguity in quality assurance and traceability. This work is critical to confirming that shear bolts meet exacting military and industrial specifications without compromise. This is a total small business set-aside subcontract under NAICS code 541330, awarded by the ASC Commodities Division within the Department of Defense, with a response deadline of August 6, 2026. The solicitation is open exclusively to small businesses as defined by the SBA, and performance will be carried out under the direction of the DLA, though the specific place of performance is not detailed. Interested parties must submit responses through the designated DIBBS portal, and all activities must comply with federal subcontracting regulations and the stringent quality protocols defined by the referenced military and quality standards.

ASC COMMODITIES DIVISION

POSTED

about 23 hours ago

DEADLINE

Quality Assurance & Government Inspection Support ServicesThe contract entails providing advanced inspection systems and comprehensive support services to facilitate government-led quality verification at the point of origin, ensuring full compliance with MIL-STD-1916 and ASQ Z1.4 standards. This includes establishing robust audit readiness protocols, maintaining accurate and accessible recordkeeping systems, and managing nonconformances through structured corrective action processes to uphold defect prevention and continuous quality improvement. The scope demands integration of inspection technologies and procedures that enable real-time data capture, traceability, and reporting to meet rigorous defense quality requirements. The work is classified as a subcontract under NAICS code 541330 and is being administered by the ASC Commodities Division within the Department of Defense. The solicitation was posted on July 27, 2026, with responses due by August 27, 2026. While specific performance locations and point of contact details are not provided, the nature of the services implies operations at supplier or manufacturing facilities where government quality verification takes place. Successful proposers must demonstrate experience with military standards, proven quality systems, and the ability to deliver scalable inspection infrastructure capable of supporting high-stakes defense supply chain integrity.

ASC COMMODITIES DIVISION

POSTED

about 23 hours ago

DEADLINE

in about 1 month

More opportunities from Department Of Defense → MARITIME SUPPLY CHAIN

Same awarding agency

Cybersecurity and NIST SP 800-171 Compliance SupportThe contract requires comprehensive implementation and documentation of NIST SP 800-171 safeguarding measures to ensure secure handling of controlled unclassified information within contractor information systems. This includes developing a detailed System Security Plan and producing formal assessment reports that demonstrate compliance with all 110 security requirements outlined in the NIST publication. The effort is focused on achieving and maintaining compliance as a prerequisite for handling sensitive defense-related data. This is a small business set-aside subcontract under the NAICS code 541512 for Computer Systems Design Services, awarded by the Department of Defense through the Maritime Supply Chain office. Performance is required at a location in Tracy, California with a zip code of 95304-5000. The solicitation was posted on July 27, 2026, and responses are due by July 30, 2026, indicating a very short turnaround window for submission. The work supports DOD cybersecurity standards and is critical for contractors seeking to operate within the defense supply chain while meeting federal information security mandates.

Computer Systems Design Services

POSTED

about 23 hours ago

DEADLINE

Packaging, Labeling, and FOB-Origin LogisticsThe contract requires full compliance with MIL-STD-129 standards for the packaging and labeling of regulator sets, ensuring all items are properly marked with barcodes, unit identification codes, and other required military specifications to enable seamless inventory management and traceability. All shipments must be coordinated under FOB-Origin terms, meaning the supplier is responsible for preparing and loading the goods at their facility, with title and risk transferring to the government upon delivery to the carrier. The final destination is the Defense Logistics Agency warehouse in Tracy, California, with the supplier accountable for timely and accurate delivery to meet the specified receipt window. This is a total small business set-aside subcontract under NAICS code 484220, which classifies it within the general freight trucking industry, indicating the work involves transportation logistics alongside packaging and labeling. The solicitation was posted on July 27, 2026, with a strict response deadline of July 30, 2026, allowing only a brief window for proposals. The contracting activity is under the Department of Defense’s Maritime Supply Chain office, and performance is solely located in Tracy, CA, with no flexibility in delivery location. Suppliers must have the capability to meet exact military packaging standards and coordinate with carriers to ensure on-time delivery to the DLA facility without delays or rejections due to non-compliance.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 23 hours ago

DEADLINE

Regulatory Compliance and Safety Data Sheet (SDS) ManagementThe contract involves the preparation and submission of Safety Data Sheets (SDS) in strict compliance with OSHA’s 29 CFR 1910.1200 regulations for hazardous materials within the defense supply chain. The work requires accurate documentation of chemical hazards, handling procedures, and emergency measures to meet federal safety standards and ensure the safe transportation, storage, and use of materials critical to defense operations. This effort is essential for regulatory compliance and operational continuity across the Department of Defense’s maritime logistics network. The solicitation is a small business set-aside under the SBA’s Total Small Business Set-Aside program, with NAICS code 541690, indicating it is targeted toward specialized scientific and technical services. Performance is centered in Tracy, California, with a tight response deadline of July 30, 2026, and the opportunity was published on July 27, 2026. The contract is structured as a subcontract and falls under the oversight of the Maritime Supply Chain organization within the Department of Defense. Successful completion will require expertise in chemical regulation, SDS formatting, and defense sector compliance protocols.

Other Scientific and Technical Consulting Services

POSTED

about 23 hours ago

DEADLINE

Manufacture and Supply of Voltage Regulator SetsThe contract calls for the full lifecycle production, testing, and delivery of 76 units of REGULATOR SET, VOLTA, manufactured to meet rigorous military specifications. This includes all phases from initial fabrication through final quality assurance testing, ensuring each unit complies with required performance, durability, and safety standards. Packaging and labeling must adhere to established military norms for traceability, handling, and storage, with full documentation provided to confirm conformance. The work is governed under a total small business set-aside, reserved exclusively for small business concerns as defined by the SBA under FAR 19.5, and classified under NAICS code 335312 for electrical equipment manufacturing. The solicitation is issued by the Maritime Supply Chain under the Department of Defense, with performance required at Tracy, California, specifically at the zip code 95304-5000. The opportunity was posted on July 27, 2026, with a response deadline of July 30, 2026, indicating a tightly constrained bid window. This is structured as a subcontract opportunity, suggesting the prime contractor will manage the delivery chain and may be sourcing from qualified small business suppliers. All proposals must align strictly with military requirements, and failure to meet technical, packaging, or compliance standards will result in rejection, regardless of pricing or timeline.

Motor and Generator Manufacturing

POSTED

about 23 hours ago

DEADLINE

DISC, CENTRIFUGAL SEThe contract is for the procurement of one centrifugal disc separator, identified by NSN 4330-01-414-0470 and part number 871683281 from Alfa Laval Inc, under solicitation SPE7M1-26-T-233X. Delivery is required within 20 days to the USS THEODORE ROOSEVELT CVN 71 at FPO AP 96632, with FOB destination terms, no variance allowed in quantity, and inspection and acceptance occurring at the delivery point. All packaging must comply with MIL-STD-2073-1E and MIL-STD-129, with specific packaging methods including dry preservative treatment, CA wrap material, and D3 unit containers; palletization follows DLA packaging requirements. Mercury or mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the hardware except for approved functional uses in batteries, lighting, instruments, sensors, controls, weapon systems, or chemical reagents specified by NAVSEA, with portable devices requiring shockproof construction and secondary containment per NAVSEA 5100-003D. Shipping must be conducted via fastest traceable means, excluding parcel post, and adheres to DLA procedures C19 and C20 for vessel shipments. The contract references DLA’s Master List of Technical and Quality Requirements for all applicable R and I-coded specifications, with the controlling revision determined by the solicitation or award date based on acquisition size. The required delivery date is July 29, 2026, with the solicitation posted on July 27, 2026, and responses due by August 7, 2026.

All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 23 hours ago

DEADLINE

PLATE, WEAR, ROTARY PThe contract is for one unit of a wear plate for rotary equipment, identified by NSN 4320-12-382-0180 and part number 7250121-043, with delivery required within 20 days of order placement to FPO AP 96693 aboard the USS ZUMWALT DDG 1000 under FOB destination terms. The solicitation number is SPE7M1-26-T-213P, issued by the Defense Logistics Agency’s Maritime Supply Chain under the Department of Defense, with a response deadline of July 30, 2026. All packaging must comply with ASTM D3951 and MIL-STD-129 for marking and labeling, with palletization adhering to DLA’s RP001 packaging requirements, and technical specifications are governed by the DLA Master List of Technical and Quality Requirements, which supersede ASTM standards. The item must be shipped via traceable means, avoiding parcel post, with transportation subject to DLA Procurement Notes C19 and C20. No pricing data is provided in the contract section, indicating a placeholder or incomplete structure. The contract incorporates numerous FAR and DFARS clauses related to cybersecurity, hazardous materials, trafficking in persons, employment eligibility, sustainable products, whistleblower rights, export controls, and prohibitions on certain foreign-sourced equipment, along with requirements for electronic invoicing through WAWF and adherence to the System for Award Management. Offerors must provide valid UEI and CAGE codes, accurately represent their small business status or socioeconomic classifications, and certify compliance with all applicable safety, reporting, and supply chain integrity directives. Delivery acceptance occurs at destination, with inspection and payment processed through DoDAAC-designated government points. A clause requires immediate notification of any safety defects, and ocean transport is permitted only with prior approval and full documentation. This acquisition appears to follow a lowest-price technically acceptable approach, with no formal evaluation factors or weights published, and compliance with all regulatory and procedural requirements is mandatory for award.

Measuring, Dispensing, and Other Pumping Equipment Manufacturing

POSTED

about 23 hours ago

DEADLINE

PUMP, RECIPROCATINGThe contract is for the procurement of 10 reciprocating pumps with NSN 4320-01-345-3940 and part number 10754, issued under solicitation SPE7M1-26-T-234Z. Delivery is required within 17 days of contract award, with a firm delivery date of August 25, 2026, and the items must be shipped FOB origin. The unit price is $10.00 per unit, totaling $100.00, with zero variance allowed in quantity. Inspection and acceptance occur at the destination, and packaging must strictly comply with MIL-STD-2073-1E and MIL-P-16789, including Level A preservation using method ZZ as specified in the commodity standard. Marking must adhere to MIL-STD-129 with no special marking codes applied. All packaging and palletization follows DLA’s procurement requirements. The delivery address is DLA Distribution Jacksonville, Building 175, Swan Road, Jacksonville, FL 32212-0103, and the point of contact is Sara Wilson. The contract references the DLA Master List of Technical and Quality Requirements, incorporating all relevant R and I numbers as defined on the DLA website. The NAICS code is 333996, and the contract falls under a federal procurement action managed by the Department of Defense’s Maritime Supply Chain.

Fluid Power Pump and Motor Manufacturing

POSTED

about 23 hours ago

DEADLINE

REACTORThe contract pertains to the procurement of a Critical Application Item, RANTEC POWER SYSTEMS INC. Part Number 700823-3, with NSN 5950-00-099-0493, for a quantity of eight units. Delivery is required within 276 days from the contract date, with FOB Origin terms and zero tolerance for quantity variance. Inspection and acceptance occur at the destination, and packaging must strictly comply with MIL-STD-2073-1E, including specific preservation methods, unit and intermediate containers designated as D3, and marking per MIL-STD-129 with no special marking codes. The item is classified as magnetized material, requiring full compliance with hazardous material handling protocols: a Material Safety Data Sheet (MSDS) meeting Federal Standard 313C and OSHA’s Hazard Communication Standard must be submitted prior to award, including magnetic field strength or compass deflection data, and all interior packaging must be labeled with the proper shipping name “Magnetized Material” and UN2807 designation for air and water transport. Sampling for quality verification follows MIL-STD-1916 or ASQ H1331 Table 1, with zero non-conformances required unless otherwise stated, and attributes are assigned verification levels VII, IV, and II for critical, major, and minor characteristics respectively. The contract incorporates all applicable technical and quality requirements from the DLA Master List, with revisions controlled by the solicitation or award date depending on acquisition size. Final delivery must be shipped to the DLA Distribution San Joaquin facility in Tracy, CA, with a required ship date of May 11, 2027, and transportation instructions governed by DLAD Proc Notes C19 and C20.

Power, Distribution, and Specialty Transformer Manufacturing

POSTED

about 23 hours ago

DEADLINE

CABLE ASSEMBLY, FIBEThe contract is for the supply of one unit of a fiber optic cable assembly identified by NSN 6020-01-699-6772 and part number 617-819133-000, under solicitation SPE7M1-26-T-234E. Delivery is required within 20 days of contract award to Camp Pendleton, California, with FOB origin terms and zero variance allowed in quantity. The item must be packaged in strict accordance with MIL-STD-2073-1E and marked per MIL-STD-129, including physical protection packaging Method 10, cleaning and drying procedures that do not damage the cable, and end protection using a neutral wrap extending at least four inches. Cables must be supplied on spools or reels with a minimum six-inch diameter, or if too short, coiled with a minimum six-inch center diameter and secured at three points. The coil must be placed in a close-fitting box meeting PPP-B-566, PPP-B-676, or ASTM-D5118 standards with adequate cushioning and proper closure. All packaging must be labeled as specified, and shipment must be sent via traceable freight, explicitly prohibiting parcel post. The delivery address and freight point of contact are clearly defined, with a required delivery date of July 22, 2026. Technical and quality requirements referenced via R and I numbers are controlled by the DLA Master List as of the solicitation issue date, and the contractor must comply with all DLA packaging directives, including palletization standards. The contract identifies Michael Reese as the primary point of contact with contact details provided for inquiries.

Fiber Optic Cable Manufacturing

POSTED

about 23 hours ago

DEADLINE

PUMPING UNIT, HYDRAUThe contract is for the procurement of five hydraulic, power-driven pumping units with NSN 4320-01-338-9877 under solicitation SPE7M1-26-T-234F, issued by the Department of Defense's Maritime Supply Chain through the Defense Logistics Agency. This is a total small business set-aside classified under NAICS code 333991 with a response deadline of August 7, 2026, and a delivery requirement of 59 days after award. The item is subject to strict export control regulations under ITAR or EAR, meaning all technical data associated with it cannot be disclosed to foreign persons, including foreign nationals within the United States, without prior authorization from the Department of State or Department of Commerce. DFARS 252.225-7048 governs this data, and only contractors with an approved US/Canada Joint Certification Program certification, who have completed mandatory DOD export control training and the DLA questionnaire, are permitted access. The contracting office is located in Texarkana, Texas, with Brandon McNeely as the primary point of contact. Additionally, the vendor must be a CMMC Level 2 Certified Third-Party Assessment Organization to comply with cybersecurity requirements.

Power-Driven Handtool Manufacturing

POSTED

about 23 hours ago

DEADLINE

METER, ELECTRICAL FREQUThe contract specifies the procurement of six electrical frequency meters, identified by NSN 6625-00-237-8904 and part number 362-P2 from Herman H Sticht Company Inc DBA 57737, under solicitation SPE7M1-26-T-233U. The item is classified as a critical application component and may contain batteries, requiring compliance with all technical and quality standards listed in the DLA Master List of Technical and Quality Requirements, which override any general commercial packaging standards such as ASTM D3951. Packaging must adhere to RP001 DLA Packaging Requirements, MIL-STD-129 labeling, and Fed-Std-313 guidelines, with hazardous material handling conforming to IP025 if applicable. Delivery is FOB origin with zero variance on quantity, inspection and acceptance occur at destination, and the unit of issue is each. The required delivery date is 164 days after award, with an original deadline of March 1, 2027, and a need ship date of January 19, 2027. The delivery point is the DLA San Joaquin Receiving Warehouse in Tracy, California, and transportation is governed by DLA procedural notes C19 and C20. All compliance, marking, and packaging must align strictly with DLA’s authoritative documentation, and the contract is issued using the DoD standard unit of issue.

Instrument Manufacturing for Measuring and Testing Electricity and Electrical Signals

POSTED

about 23 hours ago

DEADLINE

POWER SUPPLYThe contract pertains to the procurement of 21 units of a critical application power supply identified by NSN 6120015501710, with delivery required within 37 days of award, FOB origin, and inspection and acceptance to occur at the destination facility in Tracy, California. The item is sourced from two approved suppliers, SPENAX CORP and TFAB MANUFACTURING, LLC, and must conform to strict technical and quality standards outlined in the DLA Master List of Technical and Quality Requirements, which supersede all other specifications including ASTM D3951. Packaging must comply with ASTM D3951 and be palletized according to RP001 DLA Packaging Requirements, with all units marked and labeled per MIL-STD-129, including proper unit of issue and quantity per unit pack as specified. Mercury and mercury-containing compounds are prohibited unless explicitly exempted, such as in functional batteries, fluorescent lamps, or instruments specified by NAVSEA, in which case the devices must be shockproof and contain a secondary containment boundary as stipulated in NAVSEA 5100-003D. Delivery must be completed by January 10, 2027, with a need ship date of September 3, 2026, and all shipments must be sent to the designated DLA receiving warehouse in Tracy, California. The contract is a firm-fixed-price, total small business set-aside under NAICS code 335999, and requires full compliance with a comprehensive set of FAR and DFARS clauses addressing employment equity, human trafficking, hazardous materials, cybersecurity, subcontracting, inspection, default, and safeguarding of defense information. Contractors must comply with NIST SP 800-171 for information system safeguarding, implement WAWF for electronic invoicing, and adhere to labeling requirements under 29 CFR 1910.1200 for hazardous materials. Offerors must be registered with a Unique Entity ID and CAGE code and must represent their small business status under relevant socioeconomic categories. No pricing data is provided in the contract, and payment is subject to the conditions of accelerated payments to small business subcontractors. Additional clauses mandate disclosure of compensation of former DoD officials, prohibition of hexavalent chromium, restrictions on communist Chinese military company items, and export control compliance. All contractual obligations are governed by the DLA Master List of Technical and Quality Requirements, and failure to

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 23 hours ago

DEADLINE