Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, December 9 at 2:00 PM ET

Register Free →

This Subcontract opportunity from Department Of Defense was posted on April 20, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Technical Data Package (TDP) Development and Documentation

Closed
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 541330
New
SLED
RFP27-016 Countywide Bicycle & Pedestrian Master Trails Plan
Solicitation # RFP27-016
The Board of Commissioners of Glynn County, Georgia, is soliciting proposals for a Countywide Bicycle and Pedestrian Master Trails Plan covering the Brunswick Area Transportation Study Metropolitan Planning Area, including St. Simons Island and unincorporated Glynn County. The project involves professional planning, analysis, and public engagement to identify network gaps and develop concept-level recommendations for 10 to 20 priority projects. Key deliverables include a scored ranked segment database, a prioritized network gap inventory, a Priority Projects Technical Memorandum with planning-level cost estimates, and a Policy Audit Matrix. All work must comply with FHWA regulations, 2 CFR Part 200, and environmental standards including the Clean Air Act and Clean Water Act. Proposals are evaluated based on practical merit and price, with a technical ranking performed before fee negotiations. The highest-ranked proposer will negotiate the final scope and fee, which is compared against the County's independent cost estimate. Applicants must provide GDOT prequalification documentation, a SAM.gov unique entity ID, and certifications regarding EEO practices and anti-lobbying. Technical requirements include strict GIS data standards using NAD 1983 State Plane Georgia East and the delivery of Esri file geodatabase feature classes. Proposals must be submitted via the County's eProcurement Portal by December 17, 2026.
Glynn County Board of Commissioners

POSTED

about 2 hours ago

DEADLINE

in about 1 month
NAICS: 541330
New
SLED
Citywide Active Transportation Plan RFP
Solicitation # 2026-11 (ATP)
The City of Tustin is seeking a qualified engineering and planning firm to develop a Citywide Active Transportation Plan (CATP). The project focuses on technical analysis, conceptual designs, and the creation of an implementation strategy, with a specific emphasis on public outreach targeting underserved populations, schools, and vulnerable roadway users. Key deliverables include 30 percent engineering concept plans for the top five ranked infrastructure projects, a comprehensive financial plan, and ADA-accessible electronic copies of all deliverables. The project is funded by the Caltrans Sustainable Transportation Planning Grant Program, with a maximum reimbursable amount of $425,000. Selection is based on a qualifications-based ranking process rather than cost, evaluating staffing, technical approach, public outreach experience, resource allocation, and client references. The successful consultant must comply with state funding requirements, maintain a city business license, and provide professional liability insurance, including tail insurance for five years post-completion. All accounting must conform to GAAP and 2 CFR Part 200, with reimbursement based on actual allowable costs. Proposals must be submitted via OpenGov by January 13, 2027, and must include a non-discrimination certification and a non-collusion affidavit.
Public Works

POSTED

about 15 hours ago

DEADLINE

in about 2 months

AI Contract Overview

Show more

This subcontract opportunity, issued by the Department of Defense under the FA2263 Aflcmc Romk Afmetcal agency, involves the development of a comprehensive Technical Data Package. The project requires the creation of engineering drawings, processes, inspections, and software documentation that strictly adhere to MIL-STD-31000B and DI-SESS-80776B standards. The work is categorized under NAICS code 541330 and will be performed in Heath, Ohio. Interested parties must submit their responses by the deadline of April 27, 2026, following the posting date of April 20, 2026.

General Info

NAICS

541330 - Engineering Services

Place of Performance

Heath, OH, 43056, USA

Set-Aside

NONE

Documents

This scope was carved out of FA226326Q0002.

The full solicitation package (11 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Low and High Temperature Calibration Baths

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

This one is closed. Find the next one like it.

Open contracts like this one, right now:

  • DBE Subconsultant Opportunity - Qualifications for E Wells PFAS Groundwater Treatment ImprovementsOpen now, due in 15 days
  • Western Placerville Interchanges Phase 2.3 - Design & Env RFP Final CompleteOpen now, due in 21 days
See open contracts like this

Ask CLEATUS

I've read this contract. Ask me anything.

Timeline

PhaseClosed
Posted

subcontract

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → FA2263 Aflcmc Romk Afmetcal
ContactsNo contacts available
OfficeN/A
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Development of a complete TDP in compliance with MIL-STD-31000B and DI-SESS-80776B, including engineering drawings, processes, inspections, and software documentation.

More opportunities from Department Of Defense → FA2263 Aflcmc Romk Afmetcal

Same awarding agency

NAICS: 334515
New
Federal
Accessories for Keysight N5242A
Solicitation # 27E-646A-RF
The United States Air Force Air Force Metrology Calibration Program (AFMETCAL) is conducting market research via a Request for Information (RFI) to identify sources capable of providing modernized, fully compatible accessories and physical standards for legacy Keysight N5242A Vector Network Analyzers (VNAs). The objective is to procure plug-and-play replacement accessories that integrate seamlessly with the existing VNA platform without requiring software modifications or compromising metrological accuracy. These items will be delivered to various Precision Measurement Equipment Laboratories (PMELs) across the Air Force enterprise. The acquisition falls under NAICS code 334515, with an estimated quantity of one unit over a one-year period. Reconditioned, remanufactured, or used materials are strictly prohibited. Prospective contractors must demonstrate technical proficiency in supplying high-precision radio frequency (RF) and microwave calibration accessories. All delivered items must meet or exceed specified performance requirements and be verified using test equipment with first echelon certification traceable to the International System of Units via the National Institute of Standards and Technology (NIST) or other AFMETCAL approved sources. Interested parties, including both large and small businesses, must submit a comprehensive capability statement, rough order of magnitude pricing, and detailed company information by December 14, 2026. This notice is for planning purposes only and does not constitute a solicitation or a commitment of government funds.
Instrument Manufacturing for Measuring and Testing Electricity and Electrical Signals

POSTED

5 days ago

DEADLINE

in 27 days
View Details
NAICS: 334515
Federal
Metrology Grade Oscilloscope
Solicitation # 26E-187A-RF
The Air Force Metrology and Calibration (AFMETCAL) program office is conducting market research through a Sources Sought synopsis to identify potential providers for 131 highly accurate, standardized metrology-grade oscilloscopes over four years. The objective is to replace aging equipment and establish a consistent technical baseline across all Precision Measurement Equipment Laboratories (PMELs), which will streamline training, simplify Technical Order authoring, and ensure identical bench setups across the enterprise. This request is for planning purposes only and is not a solicitation for proposals. Technical requirements for the hardware include a bandwidth of 1.5 to 2 GHz, a sample rate of 5-10 GS/s, and a native resolution of at least 12-bit, with 16-bit in high-res mode. The preferred unit size is 15 by 8 by 6 inches with a minimum 10-inch high-resolution multi-touch display. Connectivity must include native GPIB, LXI Core compliant Ethernet, and USB 3.0. Each unit must be delivered with an ISO/IEC 17025 accredited Certificate of Calibration traceable to NIST or AFPSL. Support requirements include a minimum three-year warranty and guaranteed spare parts availability for at least seven years. Interested vendors, including both large and small businesses under NAICS code 334515, must submit a capability statement and rough order of magnitude pricing. Submissions should include company details, sales history, and technical specifications of the offered product. Responses are due by December 3, 2026, at 2:00 pm ET and should be directed to the listed contract specialists. Reconditioned or used materials are strictly prohibited.
Instrument Manufacturing for Measuring and Testing Electricity and Electrical Signals

POSTED

14 days ago

DEADLINE

in about 1 year
View Details
NAICS: 541519
Federal
Fluke Met/Cal and Met/Team Software and Hardware System Upgrade
Solicitation # 280148
AFMETCAL at Heath, Ohio, intends to award a sole source, firm fixed price contract to Fluke Electronics Corp. for a comprehensive hardware and software system upgrade of the Fluke MET/CAL and MET/TEAM calibration management systems. The primary objective is to modernize and expand these systems across all authorized Royal Saudi Air Force Precision Measurement Equipment Laboratory (RSAF PMEL) facilities in the Kingdom of Saudi Arabia. The procurement includes one rackmount calibration management server and 80 calibration field workstation laptops, along with necessary software licenses and manuals. All deliverables must adhere to strict quality and measurement standards, including ISO 9001, ISO/IEC 17025, and ANSI/NCSL Z540.3, and must be fully backward-compatible with existing RSAF Fluke calibration databases. The contract requires the provision of user and service manuals in iPDF format on CD/DVD-ROM, complying with Data Item Description DI-TMSS-80527D and DD Form 1423. Warranty requirements include a minimum of 365 calendar days for hardware and 90 calendar days for software from the date of delivery or acceptance. Additionally, the contractor must provide commercial technical support during standard business hours via telephone, email, or a secure web portal. Inspection and acceptance will be conducted by authorized government personnel at the specified destination in Saudi Arabia. This action is being conducted under FAR Part 12 procedures, with Fluke Electronics Corp. identified as the only source capable of meeting the requirement.
Other Computer Related Services

POSTED

15 days ago

DEADLINE

in about 3 hours
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS