Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Technical Documentation & Product Equivalency Validation

Active

Federal

Response Deadline08/14/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the preparation of technical literature and performance comparisons to validate that non-OEM shaver components meet the necessary specifications for procurement by the Department of Veterans Affairs. This effort is focused on demonstrating equivalency between third-party components and original equipment manufacturer parts, ensuring they satisfy functional, safety, and reliability standards required for VA use. The work involves rigorous testing, data analysis, and documentation to substantiate that the alternative components perform as expected under operational conditions. The solicitation is issued under the NAICS code 541690 for other scientific and technical consulting services and is classified as a subcontract. The response deadline is August 14, 2026, with the opportunity posted on August 7, 2026. Performance of the contract is expected to take place in Baltimore, Maryland, with a zip code of 21201. The contracting office is the 245-NETWORK Contract Office 5 under the Department of Veterans Affairs, and no set-aside status has been designated for this opportunity.

General Info

Validate non-OEM shaver parts for VA use through testing and technical documentation in Baltimore by August 14, 2026.

Agency

Department Of Veterans Affairs → 245-NETWORK Contract Office 5 (36C245)View Agency

NAICS

541690 - Other Scientific and Technical Consulting ServicesView NAICS

Place of Performance

Baltimore, MD, 21201

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 7

subcontract

Response DeadlineAug 14

Submission deadline

Response Deadline

08/14/2026, 05:00:00 PM UTCin 6 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Veterans Affairs → 245-NETWORK Contract Office 5 (36C245)

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Veterans Affairs → 245-NETWORK Contract Office 5 (36C245)

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Preparation of technical literature and performance comparisons to validate non-OEM shaver components meet required specifications for VA procurement.

Similar Contracts

Same NAICS industry code

Corydon Well Replacement Project – Professional Design, Bidding Support and Engineering Services During Construction

Solicitation # C2305

The Elsinore Valley Municipal Water District is seeking qualified firms to design, provide bidding support, and deliver engineering services during construction for the replacement of the existing Corydon well with a new municipal groundwater production well on district property, utilizing existing infrastructure to meet growing water demand. This project, funded in part by a Department of the Interior Bureau of Reclamation WaterSMART grant, requires comprehensive professional services spanning two phases: Phase One includes civil site design, technical specifications, and line-bid items for drilling and abandonment of the old well, with full-time on-site construction management; Phase Two encompasses architectural, structural, mechanical, electrical, and instrumentation and controls design for equipping, testing, and commissioning the new well, supported by engineering oversight throughout construction. The contract is awarded based on demonstrated competence and professional qualifications, with evaluation factors weighting relevant experience and project understanding equally at 25%, followed by scope and schedule (20%), innovation (10%), cost (10%), and overall proposal quality (10%), ensuring value over lowest price alone. Proposals must be submitted via the PlanetBids portal by September 1, 2026, and include detailed cost breakdowns by task, resumes of key personnel, representative projects, references, and mandatory certifications including non-collusion, debarment and suspension, lobbying, Buy America compliance for materials, and Executive Order N-6-22 sanctions adherence. Contractors must be registered with California’s Department of Industrial Relations and comply with federal grant requirements including 2 CFR Part 200 audit thresholds, whistleblower protections, drug-free workplace mandates, and trafficking prohibitions. Insurance requirements include $2 million general liability per occurrence, $1 million umbrella and auto liability, $2 million workers’ compensation, and no professional liability coverage required. Monthly invoicing through the Department of Treasury’s ASAP system is mandatory for federal funds, with payment processed within 45 days. The project site is located at 31642 Corydon Street, Wildomar, CA, and performance timelines span from 2024 through September 2027, with key milestones including final design submittals by April 2027 and project completion reporting by September 2027. The district requires active participation from DBE, MBE, and WBE firms certified through recognized programs, and proposers must disclose all DBE subconsultants, including reasons for non-selection. Design must comply with California State Water Resources Control Board and Riverside County regulations, and all

TKE Engineering, Inc.

POSTED

about 8 hours ago

DEADLINE

Manufacturer Authorization and Technical RepresentationThe contract requires the contractor to serve as the authorized technical representative of the manufacturer, with responsibilities centered on maintaining the validity of product warranties, enforcing quality assurance standards, and ensuring full compliance with ISO 18611-2 and applicable emissions system regulations. The role demands technical expertise to validate product performance, address compliance issues, and act as the official liaison between the manufacturer and regulatory or operational entities, particularly in environments where emissions and technical certification are critical. This subcontract is solicited by the City of Denton under NAICS code 541690, which pertains to other scientific and technical consulting services. The solicitation was posted on August 7, 2026, with a response deadline of August 26, 2026. The place of performance and specific location details are not specified, indicating potential flexibility or broad applicability across municipal operations. The contract does not include a set-aside designation, and no point of contact is listed, suggesting applicants must rely on the provided online portal for inquiries and submission requirements.

POSTED

about 13 hours ago

DEADLINE

Methodology Documentation & Sample Output Development

Floyd County Board of Commissioners

POSTED

about 21 hours ago

DEADLINE

Septic System Inspection and Reporting ServicesThe contract specifies the provision of pre- and post-pumping inspections for septic systems to evaluate sludge levels, system volume, and structural integrity, ensuring compliance with environmental regulations and nonpoint source pollution standards. All inspections must be documented with detailed reports that meet established federal and state environmental compliance frameworks, emphasizing accurate data collection and transparent reporting protocols to support regulatory oversight and public health protection. The solicitation is designated as a small business set aside under NAICS code 541690, limited to eligible small businesses, and is issued by the Department of the Interior through the Mwr OHIO office. The opportunity was posted on August 7, 2026, with a response deadline of August 24, 2026. Although the precise location of performance is unstated, services are expected to be conducted within jurisdictions governed by the agency’s environmental compliance mandates, requiring contractors to operate in alignment with federal environmental protocols and reporting requirements.

Mwr OHIO(64000)

POSTED

DEADLINE

Campaign Evaluation & Final ReportingThe contract titled Campaign Evaluation & Final Reporting requires the performance of a detailed analysis of campaign results, synthesis of data, and the delivery of a comprehensive final evaluation report. This includes compiling actionable findings, providing recommendations for future initiatives, and contributing input for an After-Action Review to ensure lessons learned are formally documented and integrated into operational planning. The work is expected to be completed under a subcontract arrangement with a response deadline of August 21, 2026, and is tied to the U.S. Embassy in Guatemala City under the Department of State, reflecting a focus on international program effectiveness. The North American Industry Classification System code 541690 indicates this is categorized under Other Scientific and Technical Consulting Services, suggesting the need for specialized analytical and reporting expertise. Performance is to be conducted with a place of performance specified as ZIP code 01016, which corresponds to Amherst, Massachusetts, indicating the physical location for deliverables or coordination may be required there despite the agency's overseas presence.

Usembassy Guatemala City

POSTED

DEADLINE

Field Service Engineering for Water System InspectionsThe contract involves performing on-site inspection, maintenance, and performance verification of a water distribution system by qualified engineers with proven experience in utility infrastructure. Work is to be conducted at a designated location in Columbia, Missouri, with a zip code of 65201, and services must comply with standards ensuring the system’s operational integrity and efficiency. The contract is classified as a subcontract under NAICS code 541690, indicating it relates to other scientific and technical consulting services. The solicitation was posted on August 7, 2026, and responses are due by August 13, 2026, at 3:00 PM Eastern Time. The contracting office is the 255-NETWORK Contract Office 15 within the Department of Veterans Affairs, which oversees the procurement on behalf of its operational requirements.

255-NETWORK Contract Office 15 (36C255)

POSTED

DEADLINE

Pharmacokinetic Data Analysis and ReportingThe contract entails the analysis of plasma concentration-time data to determine pharmacokinetic parameters and generate detailed concentration-time curves, with all results delivered in a structured Excel report accompanied by a narrative summary that interprets the findings. The work is focused on quantitative evaluation of drug behavior in the body, requiring precise computational methods and regulatory-compliant reporting standards to ensure accuracy and reproducibility. The deliverables must be clearly formatted, scientifically sound, and tailored for use in regulatory submissions or internal R&D decision-making. This is a subcontract under the National Institutes of Health, operating through the Department of Health and Human Services, with the NAICS code 541690 indicating specialized scientific and technical consulting services. The opportunity was posted on August 7, 2026, with a response deadline of August 24, 2026, and no set-aside provisions are specified. While the place of performance and point of contact details are not provided, the work is expected to be performed remotely or under flexible arrangements, consistent with the nature of data analysis tasks. The contracting entity is seeking qualified contractors with demonstrated expertise in pharmacokinetic modeling and data reporting to support ongoing research initiatives.

National Institutes Of Health Olao

POSTED

DEADLINE

Hazardous Materials Handling and Compliance SupportThe contract pertains to the provision of Safety Data Sheets and full compliance with the OSHA Hazard Communication Standard for all hazardous substances included in materials supplied under this agreement. The contractor is responsible for ensuring accurate, up-to-date SDS documentation for every hazardous chemical delivered, aligned with federal regulatory requirements to protect workplace safety and facilitate proper handling, storage, and emergency response procedures. This includes maintaining compliance during all phases of material delivery and being prepared to provide documentation upon request by regulatory or internal oversight bodies. The work is to be performed at Upton, New York, with a response deadline of August 28, 2026, and is classified under NAICS code 541690, indicating it involves other scientific and technical consulting services. The subcontract is issued by Brookhaven National Lab, a Department of Energy contractor, and is part of broader efforts to enforce safety standards across federally supported operations. All vendors must demonstrate proven capability in hazardous materials documentation and regulatory adherence, as noncompliance could result in contract termination or enforcement actions. The agreement does not specify set-aside provisions, meaning it is open to all eligible entities.

Brookhaven National Labor -Doe Contractor

POSTED

DEADLINE

Technical Documentation and Warranty Support Services

Department Of Commerce Nist

POSTED

DEADLINE

Independent Marine Surveyor Services (IMS)The contract requires the provision of an Independent Marine Surveyor to conduct inspections at Singapore during vessel loading and at Panama City during discharge, ensuring compliance with the U.S. Navy Towing Manual. The surveyor must evaluate the condition of the cutter, the appropriateness of its stowage, and the effectiveness of all securing methods to guarantee safe and compliant maritime operations. These inspections are critical to maintaining operational standards and safety protocols for naval towing activities. The solicitation is classified as a subcontract under NAICS code 541690 and is issued by the Department of Defense through the office of MSCHQ Norfolk. The opportunity was posted on August 7, 2026, with a response deadline of August 12, 2026, at 2:00 PM. The primary place of performance is Panama City, with additional responsibilities in Singapore. The contract supports defense logistics by ensuring marine assets are handled according to stringent military standards during international transit.

POSTED

DEADLINE

Hazardous Work Safety Compliance and TrainingThis contract, titled Hazardous Work Safety Compliance and Training, is a subcontract under a Small Business Set Aside designation, specifically reserved for small businesses, and is governed by NAICS code 541690, which covers other scientific and technical consulting services. It is issued by the Department of Commerce, NOAA, and requires the contractor to deliver comprehensive safety oversight and specialized training programs for HVAC technicians who perform work involving electrical systems, refrigerants, and confined spaces. The training must ensure full compliance with federal safety standards and include protocols for hazard identification, emergency response, protective equipment use, and regulatory adherence related to handling hazardous materials and working in restricted environments. The solicitation was posted on August 7, 2026, with responses due by August 20, 2026, and performance location details are not specified, implying work may occur at multiple NOAA facilities or contracted sites nationwide. The contract emphasizes safety culture, operational readiness, and regulatory compliance as core deliverables for all personnel engaged in hazardous HVAC activities.

Department Of Commerce Noaa

POSTED

DEADLINE

Technical Reporting and Deficiency DocumentationThe contract requires the submission of detailed technical service reports following every maintenance or repair event, documenting all defects observed, repairs completed, parts utilized, and operational hours logged. These reports must be formally reviewed and signed off by government representatives to ensure compliance and accountability. The scope focuses on accurate, timely, and thorough documentation to support operational readiness and asset tracking. The contract is issued under NAICS code 541690 by the Indian Health Service, part of the Department of Health and Human Services, and is classified as a subcontract. The place of performance is tied to the zip code 57570, indicating service delivery is expected in that geographic area. Proposals must be submitted by August 21, 2026, with the opportunity posted on August 7, 2026. No set-aside designation is specified, and no point of contact details are provided in the data.

Indian Health Service

POSTED

DEADLINE

More opportunities from Department Of Veterans Affairs → 245-NETWORK Contract Office 5 (36C245)

Same awarding agency

Auxiliary Shield SupplyThe contract seeks the supply of an auxiliary radiation shield to augment existing primary shielding in areas where radiopharmaceuticals are handled, ensuring enhanced protection for personnel and compliance with safety standards. This subcontract is governed under NAICS code 339999, indicating it involves other miscellaneous manufacturing, and is managed by the Department of Veterans Affairs through the 245-NETWORK Contract Office 5. The solicitation was posted on August 7, 2026, with a response deadline of August 12, 2026, at 4:00 PM, providing a limited window for qualified vendors to submit proposals. The place of performance and specific location details are not specified, suggesting the shield may be delivered to a designated VA facility or multiple sites across the country. No set-aside provisions are identified, meaning the contract is open to all eligible contractors regardless of business size or status. The absence of a point of contact and detailed address information implies that further inquiries must be directed through the official SAM.gov portal linked in the posting.

All Other Miscellaneous Manufacturing

POSTED

DEADLINE

PET Sharps Container Insert SupplyThe contract is for the supply of an insert designed specifically for use in shielded sharps containers to organize and protect their contents, ensuring safe handling and storage of medical waste. The item is categorized under NAICS code 339999, which pertains to other miscellaneous manufacturing, and the procurement is structured as a subcontract under the Department of Veterans Affairs. The opportunity was posted on August 7, 2026, with a response deadline of August 12, 2026, giving potential suppliers a five-day window to submit proposals. The contract is managed by the 245-NETWORK Contract Office 5, indicating it is part of a larger federal contracting framework. The place of performance and point of contact details are not specified, and no set-aside type is designated, meaning the opportunity is open to all eligible subcontractors without restriction based on business size or demographic categories.

All Other Miscellaneous Manufacturing

POSTED

DEADLINE

PET Shield Sharps Container SupplyThe contract involves the supply of a shielded sharps container designed specifically for the safe disposal of contaminated needles and medical materials in PET environment settings, ensuring radiation safety and compliance with stringent handling protocols. The item must meet rigorous shielding standards to protect personnel from exposure to radioactive substances while facilitating secure, compliant disposal practices within healthcare and research facilities under the Department of Veterans Affairs. Submitted as a subcontract under NAICS code 339999, the opportunity is open for responses through August 12, 2026, with no set-aside specifications applied. The contract is managed by the 245-NETWORK Contract Office 5 (36C245), and performance is expected to align with operational needs in VA facilities, though specific location details are not provided. Interested parties must submit proposals by the deadline to qualify for award consideration under this procurement initiative.

All Other Miscellaneous Manufacturing

POSTED

DEADLINE

Lead Brick Cave (3-Wall) SupplyThe contract entails the supply of a custom 2-inch lead brick cave featuring three walls, designed specifically for modular radiation shielding in nuclear medicine laboratory environments. The shielding structure is engineered to provide reliable containment of ionizing radiation, ensuring compliance with safety standards in facilities handling radioactive materials for medical diagnostics and treatment. The lead bricks are to be manufactured to precise dimensional and density specifications to ensure structural integrity, ease of assembly, and optimal radiation attenuation without gaps or inconsistencies. This subcontract opportunity, issued under NAICS code 339999 for other miscellaneous manufacturing, is managed by the Department of Veterans Affairs through the 245-NETWORK Contract Office 5. The solicitation was posted on August 7, 2026, with a response deadline of August 12, 2026, at 4:00 PM. The place of performance and exact delivery location are unspecified, indicating flexibility in logistics, though the equipment must be ready for deployment in VA-affiliated nuclear medicine labs. Bidders must be prepared to meet stringent quality controls for radiation shielding materials and provide documentation verifying material composition, lead equivalence, and compliance with relevant nuclear safety regulations.

All Other Miscellaneous Manufacturing

POSTED

DEADLINE

L-Block Shield SupplyThe contract pertains to the supply of a compact L-block lead shield specifically designed for dose calibration shielding in the preparation of radiopharmaceuticals, ensuring stringent radiation protection standards are met during handling and preparation processes. The item is critical for minimizing occupational exposure and maintaining compliance with safety protocols in nuclear medicine and radiopharmaceutical environments. The procurement is structured as a subcontract under the Department of Veterans Affairs, managed by the 245-NETWORK Contract Office 5, with the NAICS code 339999 indicating it falls under miscellaneous manufacturing. The solicitation was posted on August 7, 2026, and responses must be submitted no later than August 12, 2026, at 4:00 p.m. The place of performance and point of contact details are not specified, but performance is expected to satisfy the technical and safety requirements associated with radiopharmaceutical preparation facilities.

All Other Miscellaneous Manufacturing

POSTED

DEADLINE

Lead-Lined PET Unit Dose Cabinet SupplyThe contract seeks the supply of an OEM-manufactured, brand-name lead-lined cabinet designed specifically for the safe storage and handling of radiopharmaceuticals used in PET imaging. The cabinet must meet stringent safety and shielding standards to ensure the secure containment of radioactive materials during preparation, storage, and transport within clinical settings. As a subcontract opportunity, it is open to qualified suppliers capable of providing certified, industrial-grade equipment that complies with regulatory requirements for radiation safety and medical device integrity. The item is intended for use in healthcare facilities under the jurisdiction of the Department of Veterans Affairs, specifically managed through the 245-NETWORK Contract Office 5. The solicitation was posted on August 7, 2026, with a firm response deadline of August 12, 2026, at 4:00 PM. The North American Industry Classification System code 339999 identifies this as an Other Medical and Dental Equipment Manufacturing category, indicating the product falls under specialized medical device manufacturing. There is no set-aside designation specified, meaning all eligible contractors may compete without restriction. The place of performance and point of contact details are not provided, suggesting delivery and coordination details will be determined post-award. Interested parties must submit proposals via the official SAM.gov platform using the provided link before the deadline to be considered for award.

All Other Miscellaneous Manufacturing

POSTED

DEADLINE

OEM Authorization & Distribution Compliance ServicesThe contract seeks qualified vendors to provide OEM-certified authorization letters and verification of legitimate distribution rights for medical equipment suppliers seeking to transact with the Department of Veterans Affairs. The primary objective is to ensure that all medical devices offered to the VA are sourced through authorized and legitimate channels, directly aligned with original equipment manufacturer policies. This involves validating documentation that confirms vendor compliance with OEM distribution agreements, preventing the introduction of unauthorized, counterfeit, or diverted products into VA healthcare systems. Vendors must submit their proposals by the deadline of August 14, 2026, and the work is to be performed primarily in Baltimore, Maryland, with a NAICS code of 541611 indicating professional, scientific, and technical services related to administrative management. This subcontract supports the VA’s broader mission to maintain the integrity and safety of medical equipment procurement by enforcing strict compliance standards. Participation requires proven experience in verifying OEM authorization pathways and a clear understanding of medical device supply chain regulations, with no set-aside provisions outlined for small or disadvantaged businesses.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

Supply of Arthrex-Compatible Shaver HandcontrolsThe contract calls for the supply of three AR-8332H Shaver HP Synergy Handcontrols or functionally and technically equivalent alternatives that match the performance and specifications of the Arthrex model. The equipment must meet exacting technical standards to ensure seamless compatibility and operational integrity within existing medical systems. The requirement is for a subcontract under the Department of Veterans Affairs, with performance to be delivered to a location in Baltimore, Maryland, with a ZIP code of 21201. The solicitation is classified under NAICS code 339112, indicating it pertains to surgical and medical instrument manufacturing. Responses to this solicitation are due by August 14, 2026, at 5:00 PM Eastern Time, following the posting of the opportunity on August 7, 2026. The procurement is managed by the 245-NETWORK Contract Office 5 within the VA, though no specific point of contact is listed. The contract does not specify a set-aside classification, and no additional details regarding payment terms, delivery schedules, or warranty provisions are provided in the available data. The opportunity is accessible electronically via the SAM.gov platform under the provided UI link.

Surgical and Medical Instrument Manufacturing

POSTED

DEADLINE

Supply of Arthrex-Compatible Shaver HandpieceThe contract seeks the supply of one AR-8330SJ MicroNano Resection Small Hub Shaver Handpiece or an equivalent from another manufacturer that fully meets Arthrex’s technical specifications. The item is intended for medical use and must comply with the exact performance, design, and quality standards set by Arthrex to ensure compatibility and reliability in surgical environments. This is a subcontract under the Department of Veterans Affairs through the 245-NETWORK Contract Office 5, with the place of performance designated as Baltimore, Maryland, zip code 21201. The solicitation was posted on August 7, 2026, and responses must be submitted by August 14, 2026, at 5:00 PM Eastern Time. The NAICS code 339112 indicates the procurement relates to surgical and medical instrument manufacturing, emphasizing the specialized nature of the equipment. There is no set-aside designation, meaning the opportunity is open to all eligible suppliers regardless of business size or ownership classification.

Surgical and Medical Instrument Manufacturing

POSTED

DEADLINE

Warranty and Extended Service ProviderThe contract requires a minimum one-year comprehensive warranty covering both parts and labor for repairs under normal usage conditions, with the option to extend coverage beyond the initial term. Responsive repair services must be provided to address any malfunctions, ensuring minimal downtime and consistent operational reliability for the equipment or systems covered. The scope of work demands a high standard of service delivery and accountability throughout the warranty period and any extended service agreements. This is a subcontract under NAICS code 811212, issued by the Department of Veterans Affairs through its 245-NETWORK Contract Office 5, with performance required in Baltimore, Maryland, 21201. The solicitation was posted on August 7, 2026, with responses due by August 14, 2026. While no set-aside designation or point of contact is specified, the requirement focuses on establishing a dependable service framework that meets federal standards for maintenance and support, emphasizing timely response and quality craftsmanship in all repair activities.

Computer and Office Machine Repair and Maintenance

POSTED

DEADLINE

Post-Installation Inspection and Acceptance SupportThe contract requires support for the Post-Installation Inspection and Acceptance process for the Department of Veterans Affairs, specifically to address and correct any deficiencies identified during VA inspections to ensure that dryers operate successfully under normal conditions and meet final acceptance standards. The work is focused on operational reliability and compliance with required performance benchmarks, with the ultimate goal of achieving formal acceptance of installed equipment. All tasks must be performed at the place of performance in Baltimore, Maryland, with the zip code 21201, and must align with the NAICS code 811212, indicating the scope involves appliance repair and maintenance services. The solicitation was posted on August 7, 2026, with a response deadline of August 14, 2026, at 5:00 PM, and it is classified as a subcontract. The contracting office is the 245-NETWORK Contract Office 5 (36C245), under the Department of Veterans Affairs. The opportunity does not specify a set-aside classification or point of contact details, and the submission must be completed through the designated SAM.gov portal. Contractors are expected to respond promptly and with technical competence to meet inspection requirements and ensure timely project closure.

Computer and Office Machine Repair and Maintenance

POSTED

DEADLINE

On-Site Dryer Installation and CommissioningThe contract requires the installation and commissioning of dryers across multiple buildings within VA medical centers, with a primary focus on minimizing operational disruption to patient care and facility functions. Contractors must perform all aspects of setup including electrical connections, precise leveling, comprehensive safety inspections, and thorough operational testing to ensure full compliance with healthcare facility standards. Work must be executed with precision and care, adhering to strict timelines and protocols to maintain the integrity of ongoing medical services. The solicitation is issued under the NAICS code 238210 for Plumbing, Heating, and Air-Conditioning Contractors and is classified as a subcontract opportunity managed by the Department of Veterans Affairs through the 245-NETWORK Contract Office 5. The place of performance is designated as Baltimore, Maryland, with all work to be completed on-site at designated VA medical center locations. Responses must be submitted by August 14, 2026, and the opportunity was posted on August 7, 2026, indicating a tight seven-day window for qualified vendors to submit proposals.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE