Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Post-Installation Inspection and Acceptance Support

Active

Federal

Response Deadline08/14/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires support for the Post-Installation Inspection and Acceptance process for the Department of Veterans Affairs, specifically to address and correct any deficiencies identified during VA inspections to ensure that dryers operate successfully under normal conditions and meet final acceptance standards. The work is focused on operational reliability and compliance with required performance benchmarks, with the ultimate goal of achieving formal acceptance of installed equipment. All tasks must be performed at the place of performance in Baltimore, Maryland, with the zip code 21201, and must align with the NAICS code 811212, indicating the scope involves appliance repair and maintenance services. The solicitation was posted on August 7, 2026, with a response deadline of August 14, 2026, at 5:00 PM, and it is classified as a subcontract. The contracting office is the 245-NETWORK Contract Office 5 (36C245), under the Department of Veterans Affairs. The opportunity does not specify a set-aside classification or point of contact details, and the submission must be completed through the designated SAM.gov portal. Contractors are expected to respond promptly and with technical competence to meet inspection requirements and ensure timely project closure.

General Info

Repair and maintain dryers at Baltimore 21201 to meet VA inspection standards for final acceptance.

Agency

Department Of Veterans Affairs → 245-NETWORK Contract Office 5 (36C245)View Agency

NAICS

811212 - Computer and Office Machine Repair and MaintenanceView NAICS

Place of Performance

Baltimore, MD, 21201

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 7

subcontract

Response DeadlineAug 14

Submission deadline

Response Deadline

08/14/2026, 05:00:00 PM UTCin 6 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Veterans Affairs → 245-NETWORK Contract Office 5 (36C245)

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Veterans Affairs → 245-NETWORK Contract Office 5 (36C245)

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Support VA inspection process by correcting deficiencies and ensuring dryers operate successfully under normal conditions to achieve final acceptance.

Similar Contracts

Same NAICS industry code

Annual Support and Maintenance ServicesThe contract provides for ongoing technical support, preventive maintenance, software updates, and troubleshooting services for the district-wide public address system serving North East ISD in Texas. These services are essential to ensuring the reliability, functionality, and continuous operation of the PA system across all school facilities. The contractor is expected to respond promptly to issues, perform routine maintenance to prevent system failures, and deliver timely software updates to maintain compatibility and security. The agreement is structured as a subcontract with a solicitation posted on August 7, 2026, and responses due by August 27, 2026. It falls under NAICS code 811212, which corresponds to electronic equipment repair and maintenance, indicating the specialized technical nature of the required services. Performance of the work is expected to occur throughout the district’s facilities, with no specific location designated beyond the general jurisdiction of North East ISD.

POSTED

about 13 hours ago

DEADLINE

Quarterly Preventive Maintenance Inspections

POSTED

about 23 hours ago

DEADLINE

Authorized Maintenance and Repair of Checkpoint Wireless SystemThe contract authorizes the performance of preventive maintenance, troubleshooting, certification, and repair services for the Checkpoint Wireless System at Veterans Affairs medical facilities within VISN 8. All work must be carried out exclusively by authorized personnel, ensuring strict adherence to security and operational protocols. The scope is narrowly defined to support the continued functionality and compliance of the wireless infrastructure critical to VA operations in this region. The contract is classified as a subcontract under NAICS code 811212 and was posted on August 7, 2026, with a response deadline of August 14, 2026. It is managed by the 248-NETWORK Contract Office 8 under the Department of Veterans Affairs, with performance restricted to facilities within VISN 8. No specific location details or point of contact are provided, and the contract does not include set-aside provisions, indicating it is open to eligible subcontractors without preferential targeting.

248-NETWORK Contract Office 8 (36C248)

POSTED

DEADLINE

Warranty and Technical Support Services (5-Year)The contract requires the provision of a comprehensive five-year warranty for an ultrasound system, including all associated transducers, software updates, and ongoing cybersecurity patching, fully aligned with Department of Veterans Affairs standards. This warranty ensures continuous operational reliability and regulatory compliance throughout the term, with no gap in technical support or security maintenance. All deliverables must meet the strict requirements set by the VA to safeguard patient data and system integrity. The procurement is designated as a Service-Disabled Veteran-Owned Small Business Set-Aside under NAICS code 811212, limiting eligibility to qualifying SDVOSBs, and is managed by the 247-NETWORK Contract Office 7 under the Department of Veterans Affairs. Performance is required at a facility in Charleston, South Carolina, with a response deadline of August 17, 2026. The contract is structured as a subcontract, and the terms emphasize long-term operational support with a focus on cybersecurity resilience and regulatory adherence in a federal healthcare environment.

247-NETWORK Contract Office 7 (36C247)

POSTED

DEADLINE

Preventive Maintenance of 800KVA Automatic Voltage Regulators (AVRs)The contract involves performing scheduled preventive maintenance on 800KVA Automatic Voltage Regulators (AVRs) to ensure their stable voltage output and continued compliance with technical and safety standards. This includes comprehensive inspection, cleaning, calibration, testing, and minor repairs of the equipment, all aimed at maintaining optimal performance and preventing unexpected failures. The work must be carried out in accordance with established industry protocols and regulatory requirements to safeguard electrical systems and operational continuity. The contract is posted under the NAICS code 811212 and is classified as a subcontract, with a response deadline of August 21, 2026, at 9:30 AM. The place of performance is in Chennai, and the contracting organization is the American Consulate Chennai under the U.S. Department of State. This effort supports critical infrastructure operations in the region by ensuring voltage regulation systems remain reliable, efficient, and safe for ongoing use.

American Consulate Chennai

POSTED

DEADLINE

Annual Preventative Maintenance & Calibration of Biacore 8K+ SystemThe contract requires annual on-site preventive maintenance, calibration, and performance qualification for the Cytiva Biacore 8K+ system, ensuring optimal operational integrity through comprehensive fluidics inspection, component replacement, leak detection, and verification of optical and surface plasmon resonance performance. All tasks must be performed at the designated location by qualified personnel to meet stringent instrument specifications and regulatory standards. The solicitation is issued under the NAICS code 811212 for scientific and technical instrument repair and maintenance, managed by the National Institutes of Health under the Department of Health and Human Services. The opportunity was posted on August 7, 2026, with a response deadline of August 24, 2026, and is classified as a subcontract. The place of performance and contact details are not specified, and no set-aside provisions apply. Interested parties must submit proposals prior to the deadline to be considered for award.

National Institutes Of Health Olao

POSTED

DEADLINE

Warranty and Extended Service ProviderThe contract requires a minimum one-year comprehensive warranty covering both parts and labor for repairs under normal usage conditions, with the option to extend coverage beyond the initial term. Responsive repair services must be provided to address any malfunctions, ensuring minimal downtime and consistent operational reliability for the equipment or systems covered. The scope of work demands a high standard of service delivery and accountability throughout the warranty period and any extended service agreements. This is a subcontract under NAICS code 811212, issued by the Department of Veterans Affairs through its 245-NETWORK Contract Office 5, with performance required in Baltimore, Maryland, 21201. The solicitation was posted on August 7, 2026, with responses due by August 14, 2026. While no set-aside designation or point of contact is specified, the requirement focuses on establishing a dependable service framework that meets federal standards for maintenance and support, emphasizing timely response and quality craftsmanship in all repair activities.

245-NETWORK Contract Office 5 (36C245)

POSTED

DEADLINE

On-Site Installation and Activation ServicesThe contract requires the provision of white glove installation, configuration, and operational verification services for a CD burner at a Department of Veterans Affairs facility located in Columbia, Missouri, with a Zip code of 65201. The work involves seamless coordination with VA activation personnel to ensure full system functionality and compliance with operational standards. Services must be performed on-site and delivered to the highest level of precision, with emphasis on minimizing disruption and maximizing readiness. This subcontract is designated as a Small Business Set Aside under the SBA program, meaning only eligible small businesses may bid, and it falls under NAICS code 811212, which covers electronic and other machinery repair and maintenance. The opportunity was posted on August 7, 2026, and responses are due by August 21, 2026, at 4:00 PM. The contracting office is the 255-NETWORK Contract Office 15 (36C255), and all work must be performed at the designated federal facility location.

255-NETWORK Contract Office 15 (36C255)

POSTED

DEADLINE

5-Year Gauge Replacement and CalibrationThe contract requires the replacement and calibration of fire suppression system gauges every five years in strict compliance with NFPA 25 Chapter 13.2.4–4.3, ensuring ongoing system reliability and regulatory adherence. This subcontract is designated as a Total Small Business Set-Aside under SBA guidelines, restricting eligibility exclusively to small businesses as defined by the FAR. The North American Industry Classification System code 811212 identifies the work as related to appliance repair and maintenance services. The opportunity was posted on August 7, 2026, with responses due by August 13, 2026, and is managed by the 246-NETWORK Contracting Office 6 within the Department of Veterans Affairs. The place of performance and specific location details are not specified, indicating services may be required across multiple VA facilities under the contracting office’s jurisdiction.

246-NETWORK Contracting Office 6 (36C246)

POSTED

DEADLINE

Unique Item Identification (UID) and Data Matrix Marking ServicesThe contract requires the application and verification of permanent two-dimensional Data Matrix barcodes on each flush port cover in accordance with MIL-STD-130 standards to support Department of Defense logistics traceability. This work involves ensuring that each item is uniquely identified with a durable, machine-readable code that meets strict military specifications for durability, legibility, and data integrity under operational conditions. The markings must be permanently affixed to withstand environmental exposure and maintain scannability throughout the item’s lifecycle in the DoD supply chain. The solicitation is issued as a subcontract under the NAICS code 811212, focusing on industrial and commercial equipment repair and maintenance services, and is administered by the Department of Defense under the office identifier FA5587 48 Cons. The place of performance is designated as APO 09461, indicating a military postal address, and responses must be submitted by August 20, 2026. The requirement emphasizes compliance with federal standards for unique item identification and is intended to enhance the accuracy and efficiency of inventory management and maintenance tracking for defense assets.

FA5587 48 Cons (admin Only No Req)

POSTED

DEADLINE

On-Site Installation and Calibration ServicesThe contract encompasses on-site uncrating, installation, and calibration of X-ray systems and roller tables at Guantanamo Bay, requiring strict adherence to manufacturer specifications and industry standards. All work must be performed by qualified personnel capable of ensuring equipment functionality and safety, with particular emphasis on precision during calibration processes. Any damage incurred during installation or handling must be promptly repaired at the contractor’s expense, ensuring the integrity and operational readiness of the installed systems. The solicitation is posted under the NAICS code 811212, indicating it relates to commercial and industrial machinery and equipment repair and maintenance, and is classified as a subcontract. Performance is required at Guantanamo Bay, though the listed point of contact and address are tied to Jacksonville, Florida, suggesting administrative oversight may be centralized there. The response deadline is August 17, 2026, with the solicitation published on August 7, 2026, and is managed by the Washington Headquarters Services under the Department of Defense, indicating a federal defense-related application with potential security and compliance requirements beyond standard commercial installations.

Washington Headquarters Services

POSTED

DEADLINE

Inspection, Testing, and Maintenance (ITM) ServicesThe contract entails the provision of ongoing 24/7 technical support, preventative maintenance, firmware updates, and continuous system monitoring for the FSAS over a period of up to five years. These services are critical to ensuring uninterrupted operational performance, system reliability, and security through proactive oversight and timely remediation. The work is to be performed at Eielson AFB with a zip code of 99702, and the contract is structured as a subcontract under a Small Business Set Aside, specifically designated for small businesses as defined by the SBA. The North American Industry Classification System code is 811212, indicating the scope aligns with repair and maintenance services for electronic and precision equipment. The solicitation was posted on August 7, 2026, with responses due by August 12, 2026, and the sponsoring agency is the Department of Defense under the FA5004 354 Cons Pk office.

FA5004 354 Cons Pk

POSTED

DEADLINE

More opportunities from Department Of Veterans Affairs → 245-NETWORK Contract Office 5 (36C245)

Same awarding agency

Auxiliary Shield SupplyThe contract seeks the supply of an auxiliary radiation shield to augment existing primary shielding in areas where radiopharmaceuticals are handled, ensuring enhanced protection for personnel and compliance with safety standards. This subcontract is governed under NAICS code 339999, indicating it involves other miscellaneous manufacturing, and is managed by the Department of Veterans Affairs through the 245-NETWORK Contract Office 5. The solicitation was posted on August 7, 2026, with a response deadline of August 12, 2026, at 4:00 PM, providing a limited window for qualified vendors to submit proposals. The place of performance and specific location details are not specified, suggesting the shield may be delivered to a designated VA facility or multiple sites across the country. No set-aside provisions are identified, meaning the contract is open to all eligible contractors regardless of business size or status. The absence of a point of contact and detailed address information implies that further inquiries must be directed through the official SAM.gov portal linked in the posting.

All Other Miscellaneous Manufacturing

POSTED

DEADLINE

PET Sharps Container Insert SupplyThe contract is for the supply of an insert designed specifically for use in shielded sharps containers to organize and protect their contents, ensuring safe handling and storage of medical waste. The item is categorized under NAICS code 339999, which pertains to other miscellaneous manufacturing, and the procurement is structured as a subcontract under the Department of Veterans Affairs. The opportunity was posted on August 7, 2026, with a response deadline of August 12, 2026, giving potential suppliers a five-day window to submit proposals. The contract is managed by the 245-NETWORK Contract Office 5, indicating it is part of a larger federal contracting framework. The place of performance and point of contact details are not specified, and no set-aside type is designated, meaning the opportunity is open to all eligible subcontractors without restriction based on business size or demographic categories.

All Other Miscellaneous Manufacturing

POSTED

DEADLINE

PET Shield Sharps Container SupplyThe contract involves the supply of a shielded sharps container designed specifically for the safe disposal of contaminated needles and medical materials in PET environment settings, ensuring radiation safety and compliance with stringent handling protocols. The item must meet rigorous shielding standards to protect personnel from exposure to radioactive substances while facilitating secure, compliant disposal practices within healthcare and research facilities under the Department of Veterans Affairs. Submitted as a subcontract under NAICS code 339999, the opportunity is open for responses through August 12, 2026, with no set-aside specifications applied. The contract is managed by the 245-NETWORK Contract Office 5 (36C245), and performance is expected to align with operational needs in VA facilities, though specific location details are not provided. Interested parties must submit proposals by the deadline to qualify for award consideration under this procurement initiative.

All Other Miscellaneous Manufacturing

POSTED

DEADLINE

Lead Brick Cave (3-Wall) SupplyThe contract entails the supply of a custom 2-inch lead brick cave featuring three walls, designed specifically for modular radiation shielding in nuclear medicine laboratory environments. The shielding structure is engineered to provide reliable containment of ionizing radiation, ensuring compliance with safety standards in facilities handling radioactive materials for medical diagnostics and treatment. The lead bricks are to be manufactured to precise dimensional and density specifications to ensure structural integrity, ease of assembly, and optimal radiation attenuation without gaps or inconsistencies. This subcontract opportunity, issued under NAICS code 339999 for other miscellaneous manufacturing, is managed by the Department of Veterans Affairs through the 245-NETWORK Contract Office 5. The solicitation was posted on August 7, 2026, with a response deadline of August 12, 2026, at 4:00 PM. The place of performance and exact delivery location are unspecified, indicating flexibility in logistics, though the equipment must be ready for deployment in VA-affiliated nuclear medicine labs. Bidders must be prepared to meet stringent quality controls for radiation shielding materials and provide documentation verifying material composition, lead equivalence, and compliance with relevant nuclear safety regulations.

All Other Miscellaneous Manufacturing

POSTED

DEADLINE

L-Block Shield SupplyThe contract pertains to the supply of a compact L-block lead shield specifically designed for dose calibration shielding in the preparation of radiopharmaceuticals, ensuring stringent radiation protection standards are met during handling and preparation processes. The item is critical for minimizing occupational exposure and maintaining compliance with safety protocols in nuclear medicine and radiopharmaceutical environments. The procurement is structured as a subcontract under the Department of Veterans Affairs, managed by the 245-NETWORK Contract Office 5, with the NAICS code 339999 indicating it falls under miscellaneous manufacturing. The solicitation was posted on August 7, 2026, and responses must be submitted no later than August 12, 2026, at 4:00 p.m. The place of performance and point of contact details are not specified, but performance is expected to satisfy the technical and safety requirements associated with radiopharmaceutical preparation facilities.

All Other Miscellaneous Manufacturing

POSTED

DEADLINE

Lead-Lined PET Unit Dose Cabinet SupplyThe contract seeks the supply of an OEM-manufactured, brand-name lead-lined cabinet designed specifically for the safe storage and handling of radiopharmaceuticals used in PET imaging. The cabinet must meet stringent safety and shielding standards to ensure the secure containment of radioactive materials during preparation, storage, and transport within clinical settings. As a subcontract opportunity, it is open to qualified suppliers capable of providing certified, industrial-grade equipment that complies with regulatory requirements for radiation safety and medical device integrity. The item is intended for use in healthcare facilities under the jurisdiction of the Department of Veterans Affairs, specifically managed through the 245-NETWORK Contract Office 5. The solicitation was posted on August 7, 2026, with a firm response deadline of August 12, 2026, at 4:00 PM. The North American Industry Classification System code 339999 identifies this as an Other Medical and Dental Equipment Manufacturing category, indicating the product falls under specialized medical device manufacturing. There is no set-aside designation specified, meaning all eligible contractors may compete without restriction. The place of performance and point of contact details are not provided, suggesting delivery and coordination details will be determined post-award. Interested parties must submit proposals via the official SAM.gov platform using the provided link before the deadline to be considered for award.

All Other Miscellaneous Manufacturing

POSTED

DEADLINE

OEM Authorization & Distribution Compliance ServicesThe contract seeks qualified vendors to provide OEM-certified authorization letters and verification of legitimate distribution rights for medical equipment suppliers seeking to transact with the Department of Veterans Affairs. The primary objective is to ensure that all medical devices offered to the VA are sourced through authorized and legitimate channels, directly aligned with original equipment manufacturer policies. This involves validating documentation that confirms vendor compliance with OEM distribution agreements, preventing the introduction of unauthorized, counterfeit, or diverted products into VA healthcare systems. Vendors must submit their proposals by the deadline of August 14, 2026, and the work is to be performed primarily in Baltimore, Maryland, with a NAICS code of 541611 indicating professional, scientific, and technical services related to administrative management. This subcontract supports the VA’s broader mission to maintain the integrity and safety of medical equipment procurement by enforcing strict compliance standards. Participation requires proven experience in verifying OEM authorization pathways and a clear understanding of medical device supply chain regulations, with no set-aside provisions outlined for small or disadvantaged businesses.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

Technical Documentation & Product Equivalency ValidationThe contract requires the preparation of technical literature and performance comparisons to validate that non-OEM shaver components meet the necessary specifications for procurement by the Department of Veterans Affairs. This effort is focused on demonstrating equivalency between third-party components and original equipment manufacturer parts, ensuring they satisfy functional, safety, and reliability standards required for VA use. The work involves rigorous testing, data analysis, and documentation to substantiate that the alternative components perform as expected under operational conditions. The solicitation is issued under the NAICS code 541690 for other scientific and technical consulting services and is classified as a subcontract. The response deadline is August 14, 2026, with the opportunity posted on August 7, 2026. Performance of the contract is expected to take place in Baltimore, Maryland, with a zip code of 21201. The contracting office is the 245-NETWORK Contract Office 5 under the Department of Veterans Affairs, and no set-aside status has been designated for this opportunity.

Other Scientific and Technical Consulting Services

POSTED

DEADLINE

Supply of Arthrex-Compatible Shaver HandcontrolsThe contract calls for the supply of three AR-8332H Shaver HP Synergy Handcontrols or functionally and technically equivalent alternatives that match the performance and specifications of the Arthrex model. The equipment must meet exacting technical standards to ensure seamless compatibility and operational integrity within existing medical systems. The requirement is for a subcontract under the Department of Veterans Affairs, with performance to be delivered to a location in Baltimore, Maryland, with a ZIP code of 21201. The solicitation is classified under NAICS code 339112, indicating it pertains to surgical and medical instrument manufacturing. Responses to this solicitation are due by August 14, 2026, at 5:00 PM Eastern Time, following the posting of the opportunity on August 7, 2026. The procurement is managed by the 245-NETWORK Contract Office 5 within the VA, though no specific point of contact is listed. The contract does not specify a set-aside classification, and no additional details regarding payment terms, delivery schedules, or warranty provisions are provided in the available data. The opportunity is accessible electronically via the SAM.gov platform under the provided UI link.

Surgical and Medical Instrument Manufacturing

POSTED

DEADLINE

Supply of Arthrex-Compatible Shaver HandpieceThe contract seeks the supply of one AR-8330SJ MicroNano Resection Small Hub Shaver Handpiece or an equivalent from another manufacturer that fully meets Arthrex’s technical specifications. The item is intended for medical use and must comply with the exact performance, design, and quality standards set by Arthrex to ensure compatibility and reliability in surgical environments. This is a subcontract under the Department of Veterans Affairs through the 245-NETWORK Contract Office 5, with the place of performance designated as Baltimore, Maryland, zip code 21201. The solicitation was posted on August 7, 2026, and responses must be submitted by August 14, 2026, at 5:00 PM Eastern Time. The NAICS code 339112 indicates the procurement relates to surgical and medical instrument manufacturing, emphasizing the specialized nature of the equipment. There is no set-aside designation, meaning the opportunity is open to all eligible suppliers regardless of business size or ownership classification.

Surgical and Medical Instrument Manufacturing

POSTED

DEADLINE

On-Site Dryer Installation and CommissioningThe contract requires the installation and commissioning of dryers across multiple buildings within VA medical centers, with a primary focus on minimizing operational disruption to patient care and facility functions. Contractors must perform all aspects of setup including electrical connections, precise leveling, comprehensive safety inspections, and thorough operational testing to ensure full compliance with healthcare facility standards. Work must be executed with precision and care, adhering to strict timelines and protocols to maintain the integrity of ongoing medical services. The solicitation is issued under the NAICS code 238210 for Plumbing, Heating, and Air-Conditioning Contractors and is classified as a subcontract opportunity managed by the Department of Veterans Affairs through the 245-NETWORK Contract Office 5. The place of performance is designated as Baltimore, Maryland, with all work to be completed on-site at designated VA medical center locations. Responses must be submitted by August 14, 2026, and the opportunity was posted on August 7, 2026, indicating a tight seven-day window for qualified vendors to submit proposals.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE