Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →
CLEATUS
Get CLEATUS

This Government Contract opportunity from Department Of Defense was posted on April 23, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Technical Integration and Installation Support (OEM-Compatible PLC Systems)

Closed
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 541330
New
Pure Water Southern California Direct Potable Reuse Testing Facility
Solicitation # pure-water-southern-california-direct-potable-reuse-testing-facility
Kiewit Infrastructure West Co. is seeking proposals for the Pure Water Southern California Direct Potable Reuse Testing Facility project located in California. This solicitation is specifically set aside for small businesses, including SBA certified Veteran Owned, Service-Disabled Veteran Owned, and Women-Owned Small Businesses, falling under NAICS code 541330. Interested parties must submit their responses by November 3, 2026. The primary point of contact for this opportunity is Sepideh Aria, who can be reached via email or phone for further coordination regarding the solicitation requirements.
Kiewit Infrastructure West Co.

POSTED

about 8 hours ago

DEADLINE

in 6 days
NAICS: 541330
New
Business Impact Analysis and Update Disaster Recovery Plan Services – Inland Empire Utilities Agency
Solicitation # business-impact-analysis-update-disaster-recovery-plan-services-inland-empire-utilities-agency
Aanko Technologies Inc. is soliciting certified DBE and SBE sub-consultants and suppliers to provide professional services for the Inland Empire Utilities Agency in San Bernardino and Riverside Counties, California. The scope of work focuses on emergency management, business continuity planning, technical writing, data collection, and the updating of IT and disaster recovery plans. Relevant expertise should align with NAICS codes for administrative management, engineering services, computer systems design, and public relations. Interested parties must submit their responses by November 17, 2026. This opportunity is specifically targeted toward Disadvantaged Business Enterprises as defined by the Department of Transportation. Primary coordination for this solicitation is managed by Liz Jordan-Wettstein at Aanko Technologies Inc.
Aanko Technologies Inc.

POSTED

about 8 hours ago

DEADLINE

in 20 days
NAICS: 541330
New
SLED
SAT Commissioning and Technical Start-up ServicesThe Nebraska Public Power District is seeking a subcontractor to provide SAT Commissioning and Technical Start-up Services for DVR systems at the Cooper Nuclear Station. The selected provider will be responsible for delivering technical direction and on-site support to prime contractors, focusing on the startup, tuning, and commissioning of the systems. Key technical duties include performing Site Acceptance Testing, aligning power system stabilizers, protectors, compensators, and limiters, and documenting unit response characteristics through on-line tuning. To be eligible for this engagement, the contractor must obtain CNS site access and hold Qualified Manufacturer's Representative status. This subcontract opportunity was posted on October 27, 2026, with a response deadline of January 14, 2027. The primary objective of the contract is the delivery of a fully commissioned and tuned DVR system.
Nebraska Public Power District

POSTED

about 8 hours ago

DEADLINE

in 3 months
NAICS: 541330
New
SLED
State Project No. 0108-0196
Solicitation # 49015
The Connecticut Department of Transportation is seeking technical proposals for State Project No. 0108-0196, which focuses on the Quinebaug River Trail located in the Town of Plainfield. This solicitation, identified by number 49015, falls under NAICS code 541330 for engineering services and is categorized as a SLED organization project to be performed within the state of Connecticut. Interested parties must submit their responses by the deadline of November 13, 2026, at 7:00 PM. The solicitation was officially posted on October 27, 2026, and further details regarding the submission process can be accessed through the Bid Express platform.
Connecticut Department of Transportation

POSTED

about 9 hours ago

DEADLINE

in 17 days
NAICS: 541330
New
SLED
Seismic Safety ComplianceThis subcontract opportunity with the California Department of General Services focuses on achieving seismic safety compliance for lease projects. The selected provider will perform structural evaluations and analysis to install seismic reinforcements, specifically targeting ceilings, lighting, and wall reinforcements. All work must be executed using structural steel and anchors in strict accordance with the California Building Code and State seismic safety specifications. The project falls under NAICS code 541330 and requires the delivery of certified seismic safety compliance for the involved facilities. Interested parties should note the response deadline of November 12, 2026, for this specialized structural engineering and installation effort.
California Department of General Services

POSTED

about 11 hours ago

DEADLINE

in 15 days
NAICS: 541330
New
SLED
Structural Design for Trail InfrastructureThis subcontract for Structural Design for Trail Infrastructure involves providing specialized structural analysis and design services for prime contractors working on Northwest Hills Council of Governments projects. The scope of work focuses on the design of bridges, boardwalks, and culverts to ensure stability and resolve structural challenges, with a requirement for the use of structural analysis software. Key deliverables include detailed structural drawings, load calculations, and material specifications. To qualify for this engagement, the provider must hold a Professional Engineering license in Structural Engineering. The opportunity is managed through DAS Procurement for the state of Connecticut under NAICS code 541330. Interested parties must submit their responses by the deadline of November 30, 2026.
DAS Procurement

POSTED

about 13 hours ago

DEADLINE

in about 1 month
NAICS: 541330
New
SLED
Multi-Use Trail Design and EngineeringThis subcontract for Multi-Use Trail Design and Engineering involves providing primary planning and civil engineering design services for prime contractors working on Northwest Hills Council of Governments projects. The selected provider will be responsible for planning trail systems, developing technical implementation methodologies, and establishing project timelines with specific milestones. Key deliverables include final design plans, technical specifications, and comprehensive project schedules, with a requirement for the use of CAD and GIS mapping tools. To be eligible, the contractor must hold a Professional Engineer license and maintain insurance that includes a Waiver of Subrogation. This opportunity is managed through DAS Procurement for the state of Connecticut under NAICS code 541330. Interested parties must submit their responses by the deadline of November 30, 2026.
DAS Procurement

POSTED

about 13 hours ago

DEADLINE

in about 1 month
NAICS: 541330
New
SLED
RFP/RFQ - On-Call Engineering Services for Torrington Transfer Station/NRRA
Solicitation # EDC 11- 2026 -01
The Northwest Hills Council of Governments (NHCOG) is soliciting proposals under solicitation number EDC 11- 2026 -01 for on-call engineering services to support the Torrington Transfer Station and the Northwest Resource Recovery Authority (NRRA). The agency seeks a qualified firm specializing in Municipal Solid Waste and Recycling Transfer Stations to provide technical analysis, facility and operational capacity assessments, site planning, and permitting assistance. These services are intended to support ongoing operations and inform the NRRA Strategic Plan and future capital investment decisions, ensuring compliance with CT DEEP General Permits. Interested firms must submit their proposals by November 30, 2026, at 11:00 AM. Submissions must include a project management plan, key personnel resumes limited to two pages, three relevant references, a technical approach, and a detailed project timeline. A fee proposal containing hourly rates or lump sum allocations must be submitted in a separate sealed envelope. Evaluation will be based on personnel qualifications, experience with multiuse trails and waste facility planning, the proposed project approach, and the fee schedule. Awardees must provide proof of workers compensation, liability, and vehicle insurance, including a waiver of subrogation and naming the State of Connecticut and NHCOG as additional insureds within ten days of the award. Required documentation also includes a Non-Collusion Affidavit and certifications of non-discrimination.
DAS Procurement

POSTED

about 13 hours ago

DEADLINE

in about 1 month
NAICS: 541330
New
SLED
Acoustic Consulting & Specialized Music Room DesignThis subcontract opportunity with the Los Angeles Community College District involves providing specialized acoustic consulting and design services for music facility projects. The selected contractor will be responsible for designing acoustic treatments, sound isolation, and room geometry, while performing detailed acoustic modeling and specifying sound-absorbing materials. A primary focus of the work is ensuring proper isolation between performance spaces and practice rooms to maintain high audio standards. The project requires deep expertise in noise vibration control and music facility acoustics to deliver comprehensive design reports and technical specifications. Performance of the contract will take place in Los Angeles, California. Interested parties must submit their responses by the deadline of November 25, 2026.
Los Angeles Community College District

POSTED

about 14 hours ago

DEADLINE

in 29 days
NAICS: 541330
New
SLED
Professional Design Service For The Annual Pavement Rehabilitation 2027
Solicitation # 20261026023
City of Orinda

POSTED

about 16 hours ago

DEADLINE

in 23 days
NAICS: 541330
New
SLED
Geotechnical Consulting and Soils Investigation
California State University, Chico

POSTED

about 16 hours ago

DEADLINE

in 9 days
NAICS: 541330
New
SLED
Campus Consulting – Geotechnical Engineering Services
Solicitation # RFP2026-05AM
California State University, Chico is soliciting proposals under RFP2026-05AM for a non-exclusive Task Order Service Agreement to provide professional geotechnical consulting services on an as-needed basis. The scope of work includes conducting standard geotechnical and geologic seismic investigations, recommending and coordinating boring locations, and interfacing with project architects to produce Geotechnical or Soils Investigation Reports. These reports must ensure that project designs meet all current codes and physical conditions, although complete geologic hazard studies for non-essential campus buildings are specifically excluded. The contract features an initial term of two years with the option for two additional two-year renewals. Qualified respondents must submit a proposal by November 5, 2026, including a standard fee schedule, detailed firm experience, resumes of key staff, and sample engineering documents. Evaluation will place emphasis on the firm's project history, specifically the construction costs of previous projects and experience working with higher education institutions, particularly the California State University system. Awarded providers must comply with various California legal mandates, including registration with the Department of Industrial Relations, adherence to the California Taxpayer and Shareholder Protection Act of 2003, and the maintenance of comprehensive insurance coverage, including $4 million in general liability and $1 million in workers' compensation. Payments are processed monthly in arrears upon the submission of invoices in the required CSU format.
California State University, Chico

POSTED

about 16 hours ago

DEADLINE

in 9 days

AI Contract Overview

Show more

The contract requires on-site integration and installation of Compact Logix 5380 programmable logic controller components into existing control systems at a Marine Corps facility in Albany, Georgia, with strict emphasis on maintaining operational continuity during the transition. This work is scoped to ensure full compatibility with current industrial control infrastructure using OEM-approved components, and execution must adhere to military-grade reliability and safety standards. The effort involves physical installation, system configuration, testing, and validation to guarantee seamless interaction between new and legacy equipment without disruption to ongoing mission-critical operations. All work must be completed by the response deadline of April 29, 2026, under a subcontract arrangement classified under NAICS code 541330 for engineering services. The performance location is firmly designated as the facility with ZIP code 31704, and the contracting authority is the Department of Defense under the Commander’s office. While specific point of contact details are not provided, the work is expected to comply with all applicable defense procurement regulations and require technical expertise in Rockwell Automation systems, industrial network integration, and secure facility access protocols. No set-aside provisions are indicated, and the contract is open to qualified subcontractors capable of delivering precision industrial automation services in a secure military environment.

General Info

Install Compact Logix 5380 on-site at Marine Corps facility in Albany, GA, by April 29, 2026, ensuring seamless integration and military compliance.

Agency

Department Of Defense → Commander

NAICS

541330 - Engineering Services

Place of Performance

GA, 31704, USA

Set-Aside

NONE

Documents

This scope was carved out of M6700426Q0026.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

PLC upgrades for Blast and Paint

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed
Posted

subcontract

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Commander
ContactsNo contacts available
OfficeN/A
Organization / AgencyDepartment Of Defense → Commander
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
On-site integration and installation of Compact Logix 5380 components into existing control systems at the Marine Corps facility in Albany, GA, ensuring operational continuity.

More opportunities from Department Of Defense → Commander

Same awarding agency

NAICS: 313310
New
Federal
Multispectral Camouflage Overgarment
Solicitation # M6785426R5407
The Department of the Navy, United States Marine Corps, through the Portfolio Acquisition Executive Marine Corps, is seeking a small business contractor under NAICS code 313310 and PSC Code 8415 for the manufacture, testing, and delivery of Multi-Spectral Camouflage Overgarments. This procurement will be conducted using FAR Part 15 negotiated procedures for non-commercial supplies. The effort is a 100 percent small business set-aside, with the primary place of performance located in Quantico, Virginia. Due to the presence of Controlled Unclassified Information and Controlled Technical Information, the Statement of Work and Purchase Description are restricted and not available on SAM.gov. To access these documents, prospective offerors must undergo a rigorous vetting process, which includes submitting a formal request with CAGE and UEI details, providing proof of an active Joint Certification Program certification via DD Form 2345, verifying NIST SP 800-171 self-assessment scores in the Supplier Performance Risk System, and executing a Government-furnished Non-Disclosure Agreement. Once verified, documents will be distributed exclusively via DoD SAFE. The contract mandates strict adherence to cybersecurity and data handling standards, including DFARS 252.204-7012, NIST SP 800-171, 32 CFR Part 2002, and DoD Impact Level 5 requirements. Additionally, materials may be subject to ITAR and EAR export controls. Prime contractors are prohibited from sharing restricted materials with subcontractors or partners without prior written approval from the Contracting Officer and the execution of a Tri-Party Non-Disclosure Agreement. Questions regarding this pre-solicitation must be submitted using the provided template by 1600 hours Eastern on November 6, 2026.
Textile and Fabric Finishing Mills

POSTED

about 19 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334220
New
Federal
Request For Information M67854-26-I-2023: Own Force Monitoring at Echelon (OFM-E) Electromagnetic Spectrum Sensing
Solicitation # M67854-26-I-2023
The Program Acquisition Executive Marine Corps, through the Program Manager Tactical Communications and Electromagnetic Warfare Systems, has issued Request for Information M67854-26-I-2023 to conduct market research for Own Force Monitoring/Sensing (OFM/S) capabilities. This effort specifically focuses on Own Force Monitoring at Echelon (OFM-E), seeking vehicle- or command post-mounted systems that provide real-time awareness, passive analysis, and monitoring of electromagnetic spectrum signatures. The goal is to enable Marine Corps units to establish baseline emissions, detect anomalies, and enforce emission control and signature management measures to enhance operational security and survivability in contested environments. The Marine Corps is seeking Commercial Off-The-Shelf (COTS) or Non-Developmental Item (NDI) solutions with a Technology Readiness Level of 8 or 9 that align with the Sensor Open Systems Architecture (SOSA) and feature improved size, weight, and power attributes. Interested businesses under NAICS code 334220 must submit a response package by November 5, 2026, including a specification compliance matrix, technical readiness assessments, and details regarding Technical Data Package rights. This RFI is for informational and planning purposes only and does not constitute a solicitation for bids or a commitment by the government to award a contract.
Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

POSTED

2 days ago

DEADLINE

in 9 days
View Details
NAICS: 541380
New
Federal
Multi-Spectral Performance Testing ServicesThis small business set-aside subcontract, titled Multi-Spectral Performance Testing Services, involves providing technical testing for prime contractors on US Marine Corps projects based in Quantico. The primary objective is to validate that overgarments meet specific multi-spectral requirements through the use of thermal imaging cameras and spectrophotometers to analyze visual, near-infrared, and thermal infrared signatures. The final deliverables for this engagement include validation certificates and detailed technical test reports. Due to the nature of the work, the contractor must adhere to strict security and compliance standards, including NIST SP 800-171, 32 CFR Part 2002, and DoD Impact Level 5 requirements for handling Controlled Unclassified Information. Additionally, a Downstream Entity NDA is required. The opportunity is categorized under NAICS code 541380 and is managed under the Department of Defense.
Testing Laboratories and Services

POSTED

5 days ago

DEADLINE

in 10 days
View Details
NAICS: 315990
New
Federal
Camouflage Overgarment Cut-and-Sew ContractorThis subcontract opportunity is for a Camouflage Overgarment Cut-and-Sew Contractor to support US Marine Corps projects under the Department of Defense. The selected contractor will be responsible for the precision cutting, sewing, and assembly of multi-spectral camouflage overgarments using industrial machinery and government-specified materials in accordance with the provided Purchase Description. Performance will take place in Quantico, Virginia. This is a total Small Business Set Aside under NAICS code 315990. To be eligible, contractors must meet strict security and regulatory requirements, including a NIST SP 800-171 self-assessment, DFARS 252.204-7012 compliance, and the execution of a Downstream Entity NDA. The response deadline for this opportunity is November 6, 2026.
Apparel Accessories and Other Apparel Manufacturing

POSTED

5 days ago

DEADLINE

in 10 days
View Details
NAICS: 313310
New
Federal
Multi-Spectral Camouflage Material SupplierThis small business set-aside subcontract involves the supply of specialized technical textiles for US Marine Corps multi-spectral camouflage projects. The selected supplier will manufacture fabrics designed to reduce visibility across visual, infrared, and thermal spectrums through the use of conductive blends or specialized coatings. Deliverables consist of fabric provided in either cut-lengths or bulk rolls to support prime contractors. Performance for this Department of Defense contract is centered in Quantico, Virginia. Due to the sensitive nature of the materials, the supplier must maintain DDTC registration and ensure strict compliance with ITAR and EAR regulations. Additionally, the successful candidate is required to execute a Downstream Entity NDA to protect project confidentiality.
Textile and Fabric Finishing Mills

POSTED

5 days ago

DEADLINE

in 10 days
View Details
NAICS: 541513
New
Federal
Marine Corps Cyberspace Environment (MCCE) Operational Support Services (OSS) and Enterprise Artificial Intelligence (AI) Integration
Solicitation # M6785426I4208
The Marine Corps Systems Command (MARCORSYSCOM) is conducting market research via Request for Information M67854-26-I-4208 to identify commercial partners for the Marine Corps Cyberspace Environment (MCCE) Operational Support Services (OSS) and Enterprise Artificial Intelligence (AI) Integration. The primary objective is to secure skilled, professional IT touch-labor services under a Government-Owned, Government-Operated, Contractor-Supported (GOGOCS) model. While the focus remains on providing DCWF-certified personnel, the government is seeking innovative ways to integrate AI and automation as embedded components of the service delivery model to increase operational efficiency and reduce manual labor costs over time. The government is specifically exploring service-based ordering models, such as procuring hours of service or specific outcomes rather than individual labor categories. For pricing purposes, any contractor-provided proprietary tooling costs must be included within fully burdened labor rates, as this is a services acquisition. Interested respondents must submit a capabilities narrative limited to five pages, a vendor comment matrix in Excel format with a 300-word limit per cell, and optional supplementary materials not exceeding fifteen pages. The current response deadline is November 3, 2026, at 1:00 P.M.
Computer Facilities Management Services

POSTED

6 days ago

DEADLINE

in 6 days
View Details
NAICS: 334418
New
Federal
Supply of Maincon PCB Retrofit Kit for Coldfire ProcessorThis subcontract involves the procurement and delivery of one retrofit Maincon printed circuit board, specifically part number 93-6405, designed for a Coldfire processor. The equipment is intended for prime contractors supporting projects at the Marine Corps Logistics Base in Albany, with the place of performance located in Barstow. The acquisition is managed by the Department of Defense and must be executed in compliance with FAR 12 commercial product standards. The project falls under NAICS code 334418, with a response deadline set for October 30, 2026.
Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

7 days ago

DEADLINE

in 2 days
View Details
NAICS: 334418
New
Federal
Supply of I/O PCB AC CCAThis subcontract involves the procurement and delivery of a specific printed circuit board assembly, Part Number 93-6442 (I/O PCB AC CCA), intended for use in industrial machinery. The equipment is destined for prime contractors working on projects at the Marine Corps Logistics Base in Albany, with the place of performance located in Barstow. The acquisition is managed under the Department of Defense and must comply with FAR 12 commercial product standards. The scope of work requires the delivery of one I/O PCB AC CCA unit. This opportunity falls under NAICS code 334418 and was posted on October 21, 2026, with a response deadline set for October 30, 2026.
Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

7 days ago

DEADLINE

in 2 days
View Details
NAICS: 423610
New
Federal
Supply of SMTC MCODE Relay Triac Service KitThis subcontract involves the procurement and delivery of one SMTC MCODE Relay Triac service kit, specifically part number 93-32-3087C, for industrial machinery. The equipment is intended for prime contractors working on projects at the Marine Corps Logistics Base in Albany, with the procurement adhering to FAR 12 commercial product standards. Managed under the Department of Defense, the contract falls under NAICS code 423610. While the materials support the Albany location, the place of performance is listed as Barstow. The solicitation was posted on October 21, 2026, with a response deadline of October 30, 2026.
Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

7 days ago

DEADLINE

in 2 days
View Details
NAICS: 333515
New
Federal
HAAS Milling Machine Repair
Solicitation # M6700427Q0002
Solicitation M67004-27-Q-0002 is a request for quotes for the on-site repair of one government-owned Haas HS-4R milling machine, serial number 2052422, located at the MDMC Production Plant Barstow in California. The scope of work requires the contractor to provide all labor, materials, tools, and supervision to install OEM-approved parts, specifically a Side Mount Tool Changer M-code relay triac service kit, an I/O printed circuit board assembly, and a Maincon PCB retrofit for ColdFire processor. The contractor is responsible for the installation, functional testing in the presence of a government employee, and the preparation and return of failed core components according to manufacturer requirements. All work must be completed within 60 calendar days after award and adhere to strict OEM standards and industrial safety regulations, including NFPA 70 and NFPA 79. The government intends to make a direct, noncompetitive award to the Original Equipment Manufacturer, as they are deemed the only vendor capable of satisfying the requirement. Award is contingent upon a fair and reasonable price determination and the contractor's compliance with responsibility requirements, including registration in the System for Award Management and a declaration of compliance with FAR 52.240-90 regarding security prohibitions and exclusions. Payment will be processed electronically via the Wide Area WorkFlow system. Responses are due by October 30, 2026, and must be submitted via email to the primary point of contact.
Cutting Tool and Machine Tool Accessory Manufacturing

POSTED

7 days ago

DEADLINE

in 2 days
View Details
NAICS: 541930
Federal
MCOTEA American Sign Language Interpreting
Solicitation # M0026427Q0009
The Marine Corps Operational Test and Evaluation Activity (MCOTEA) is soliciting professional American Sign Language (ASL) interpreting services to facilitate two-way communication for a deaf or hard of hearing employee. This requirement, under solicitation M0026427Q0009, encompasses both unclassified and classified support for mission-related meetings, training, conferences, and operational test activities. Services will be delivered via on-site interpreting at MCB Quantico and the University of Mary Washington, as well as through Video Remote Interpreting (VRI). The contract is a 100% Total Small Business Set-Aside under NAICS code 541930, with a performance structure consisting of a base year and four option years. The contract utilizes a best-value trade-off award process based on three factors: Technical, Past Performance, and Price, following an initial compliance gateway check. Technical requirements mandate that interpreters hold RID, NAD, or BEI certifications, and the contractor must maintain a Secret Facility Security Clearance (FCL) with personnel possessing the necessary eligibility for classified work. Pricing is structured in eight-hour blocks for interpreting services and cost-no-fee for travel, with a travel cap of 18,650 dollars per period. Performance is monitored through a Quality Assurance Surveillance Plan, requiring a 98 percent on-time arrival rate and a 30-minute staffing standard for VRI requests.
Translation and Interpretation Services

POSTED

9 days ago

DEADLINE

in 18 days
View Details
NAICS: 424110
Federal
Non-Local Travel Support for ASL InterpretersThis subcontract focuses on providing non-local travel arrangements and logistics for prime contractors supporting Marine Corps Operational Test and Evaluation Activity projects. The scope of work includes coordinating travel for personnel and utilizing specialized travel management software to track logistics and deliver documented cost reimbursements. All financial activities and reimbursements must strictly adhere to the guidelines set forth in FAR 31.205-46. The opportunity is designated as a sole source set-aside for SBA Certified Women-Owned Small Businesses under NAICS code 424110. Managed by the Department of Defense, the contract was posted on October 15, 2026, with a response deadline of November 14, 2026. Performance for these services is centered in the 22134 zip code area.
Printing and Writing Paper Merchant Wholesalers

POSTED

13 days ago

DEADLINE

in 18 days
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

NAICS: 541330
Closed
Federal
Testing, Adjusting, and Balancing (TAB)
Upper Colorado Regional Office

POSTED

6 months ago

CLOSED

5 months ago
View Details
NAICS: 541330
Closed
Federal
Construction Safety and Quality Compliance
US Embassy Brazzaville

POSTED

6 months ago

CLOSED

6 months ago
View Details
NAICS: 541330
Closed
Federal
System Integration and Installation at Edwards AFB
FA9302 Aftc Pzz

POSTED

6 months ago

CLOSED

6 months ago
View Details
NAICS: 541330
Closed
Federal
Design and Construction Documentation
CDC Office Of Acquisition Services

POSTED

6 months ago

CLOSED

4 months ago
View Details
NAICS: 541330
Federal
Tactical Datalink Simulation & Testing Support
FA8126 Afsc Pzimb

POSTED

6 months ago

DEADLINE

N/A
View Details
NAICS: 541330
Closed
Federal
Technical Data Package & Certification Support
Ut DLA Aviation At Ogden

POSTED

6 months ago

CLOSED

5 months ago
View Details
NAICS: 541330
Federal
Certification & Data Reporting Package
DLA Maritime - Puget Sound

POSTED

6 months ago

DEADLINE

N/A
View Details
NAICS: 541330
Closed
Federal
PLC/SCADA and Remote Monitoring Systems Integration
Navfacsyscom Mid-atlantic

POSTED

6 months ago

CLOSED

6 months ago
View Details
NAICS: 541330
Closed
Federal
Septic System Design and Technical Specifications Compliance
Ner Services Mabo (43000)

POSTED

6 months ago

CLOSED

4 months ago
View Details
NAICS: 541330
Closed
Federal
UID Marking and Data Reporting (MIL-STD-130 Compliance)
FA4621 22 Cons Pk

POSTED

6 months ago

CLOSED

6 months ago
View Details
NAICS: 541330
Closed
Federal
Condition Monitoring & Performance Diagnostics
USDA Ars Afm Apd

POSTED

6 months ago

CLOSED

6 months ago
View Details
NAICS: 541330
Closed
Federal
Landfill Closure Engineering Analysis
Navajo Region

POSTED

6 months ago

CLOSED

6 months ago
View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS