Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Technical Packaging and MIL-STD-129 Labeling Services

Active

Federal

Response Deadline08/24/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract with the Department of Defense ASC Supplier Oper OEM Division involves providing specialized packaging, labeling, and preservation services for the military shipment of electro-mechanical switches. The contractor must ensure all work is performed in strict compliance with MIL-STD-129, ASTM D3951, and DLA RP001 standards to meet military shipping requirements. The project is based in San Diego, California, under NAICS code 423840. Interested parties must submit their responses by August 24, 2026, following the posting date of August 16, 2026.

General Info

DoD subcontract for military switch packaging and labeling services in San Diego, California.

Agency

Department Of Defense → ASC SUPPLIER OPER OEM DIVISIONView Agency

NAICS

423840 - Industrial Supplies Merchant WholesalersView NAICS

Place of Performance

SAN DIEGO, CA, 92136-3581, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE4A5-26-T-367H.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

SWITCH, LIQUID LEVEL

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 16

subcontract

Response DeadlineAug 24

Submission deadline

Response Deadline

08/24/2026, 05:00:00 PM UTCin 7 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → ASC SUPPLIER OPER OEM DIVISION

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → ASC SUPPLIER OPER OEM DIVISION

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Provide packaging, labeling, and preservation services in compliance with MIL-STD-129, ASTM D3951, and DLA RP001 for military shipment of electro-mechanical switches.

Similar Contracts

Same NAICS industry code

FILTER ELEMENT, FLUI

Solicitation # SPE4A7-26-R-XA42

This contract is for the procurement of one commercial off the shelf filter element, part number AC9780F-15Y6 by Pall Aeropower Corporation, under a firm fixed price agreement. The item is designated as a critical application item and requires strict adherence to supply chain traceability documentation and FAA airworthiness approval. Delivery is required within 247 days after the order, with inspection and acceptance occurring at the destination. The agreement mandates compliance with various technical and quality requirements, including DLA packaging standards, cybersecurity maturity model certification level 2 self assessment, and specific sampling methods such as MIL-STD-1916. All packaging and marking must align with MIL-STD-129 and RP001 requirements. The contract also incorporates covered defense information protocols and requires the removal of government identification from any non-accepted supplies.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 3 hours ago

DEADLINE

Military-Compliant Packaging and PalletizationThis subcontract through the Department of Defense ASC Commodities Division involves the packaging and palletization of 7,699 hardware units. The work must be performed in strict accordance with MIL-STD-2073-1E and DLA RP001 standards, ensuring proper moisture barrier protection, cushioning, and unit load stability to meet military logistics requirements. The project is located in Cherry Point, zip code 28533-5040, and falls under NAICS code 423840. Interested parties must submit their responses by the deadline of August 24, 2026.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Military-Grade Packaging and Marking Services

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Packaging & Preservation ServicesThe Packaging and Preservation Services subcontract, issued by the Department of Defense Fluid Handling Division, requires the provision of industrial packaging services in New Cumberland, Pennsylvania. The contractor must ensure all packaging complies with ASTM D3951, RP001, and MIL-STD-129 standards, specifically incorporating moisture barriers, corrosion inhibition, desiccants, and professional sealing and palletization techniques. This opportunity falls under NAICS code 423840 and was posted on August 16, 2026. Interested parties must submit their responses by the deadline of August 27, 2026.

FLUID HANDLING DIVISION

POSTED

DEADLINE

Defense-Compliant Packaging and Palletization

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Military-Grade Packaging and Palletization ServicesThis subcontract for Military-Grade Packaging and Palletization Services involves the packaging, labeling, and palletizing of valve assemblies for the Department of Defense, specifically the ASC Supplier Oper OEM Division. The work must be performed in Jacksonville, Florida, and requires strict adherence to military standards, including MIL-STD-129 compliance, hazardous material labeling, and RP001 unit load configurations. The opportunity was posted on August 16, 2026, with a response deadline of August 24, 2026. It falls under NAICS code 423840 and is managed through the DIBBS system.

ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Military-Grade Packaging & Preservation

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Defense-Compliant Packaging and Marking

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Specialized Packaging and Preservation Services

LAND SUPPLY CHAIN

POSTED

DEADLINE

Hazardous Material Packaging and Labeling

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Specialized Packaging and Labeling Services

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Military-Grade Packaging and Labeling Services

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

More opportunities from Department Of Defense → ASC SUPPLIER OPER OEM DIVISION

Same awarding agency

SWITCH, PRESSURE

Solicitation # SPE4A5-26-T-368A

This contract is for the procurement of 37 pressure switches, identified by NSN 5930-00-805-5960 and Hamilton Sundstrand Corporation part number 560781. The items are classified as commercial critical application items and must adhere to specific technical and quality requirements, including CMMC Level 2 self-assessment and covered defense information standards. Delivery is set for 237 days after the order, with a required delivery date of October 29, 2026, shipping FOB Origin to DLA Distribution Warner Robins. Quality assurance is governed by MIL-STD-1916 or ASQ H1331 sampling plans, with zero non-conformances required for acceptance. Packaging and preservation must comply with MIL-DTL-28786 for switches, MIL-STD-129 for marking, and RP001 for palletization. The contract specifies destination inspection and acceptance, and it explicitly states that item unique identification is not required by the service customer.

Switchgear and Switchboard Apparatus Manufacturing

POSTED

about 3 hours ago

DEADLINE

SPRING, HELICAL, COMPRES

Solicitation # SPE4A5-26-T-367Z

This contract is for the procurement of 103 helical compression springs, identified by NSN 5360-01-423-4048 and part number 44-1832. The items are designated as critical application components and must be delivered within 35 days to the Arizona Industries for the Blind in Phoenix. The agreement specifies a zero percent quantity variance and mandates that inspection and acceptance occur at the destination. Quality assurance is governed by MIL-STD-1916 or ASQ H1331, utilizing a zero-based sampling plan for acceptance. The contract strictly prohibits the use of Class I ozone-depleting chemicals and requires adherence to DLA packaging and marking standards, specifically MIL-STD-129 and MIL-STD-2073-1E. Additionally, the supplier must comply with the DLA Master List of Technical and Quality Requirements and provide necessary documentation for source approval.

Spring Manufacturing

POSTED

about 3 hours ago

DEADLINE

RETAINER-EJECTOR, ELECT

Solicitation # SPE4A5-26-T-368Q

This contract is for the procurement of 15 units of an electrical card ejector retainer, identified by NSN 5998012534253 and Honeywell part number 8503647. The item is designated as a critical application item and must be manufactured according to specific technical and quality requirements, including the use of MIL-PRF-31032 for printed circuit boards. Delivery is required within five days after order, with the point of inspection and acceptance set at the origin. The agreement mandates strict adherence to DLA packaging and marking standards, specifically requiring DOD qualified electrostatic discharge and electromagnetic interference protective materials per MIL-PRF-81705 to prevent damage to leads and terminals. Quality assurance will be managed through sampling methods aligned with MIL-STD-1916 or ASQ H1331. The final shipment is destined for the Government of Israel Ministry of Defense.

Bare Printed Circuit Board Manufacturing

POSTED

about 3 hours ago

DEADLINE

PAD, SUPPORT RING

Solicitation # SPE4A5-26-T-368M

This contract is for the procurement of three support ring pads, identified as Boeing part number 29-49006-1 and NSN 1440-01-006-3225. The items are designated as critical application items and must be delivered to Vandenberg SFB within 20 days. The agreement specifies a zero percent quantity variance and requires inspection and acceptance to take place at the destination. Compliance is required with the DLA Master List of Technical and Quality Requirements, including specific standards for packaging via ASTM D3951 and MIL-STD-129, and palletization per RP001. Sampling must follow MIL-STD-1916 or ASQ H1331, with strict adherence to zero-based sampling plans for acceptance. Shipping must be conducted via traceable means, and the contract incorporates requirements for source approval documentation and the removal of government identification from non-accepted supplies.

Guided Missile and Space Vehicle Propulsion Unit and Propulsion Unit Parts Manufacturing

POSTED

about 3 hours ago

DEADLINE

TRANSDUCER, VELOCITY

Solicitation # SPE4A5-26-T-367X

This contract is for the procurement of one velocity transducer, identified by NSN 6680-01-652-9746 and Perkins Engines Inc part number U5MK1086. The order is issued by the Department of Defense under solicitation number SPE4A5-26-T-367X, with a required delivery date of August 11, 2026, and a delivery timeframe of 20 days after order. The item is to be delivered FOB Origin to the Commander Naval Air Force Pacific Fleet in San Diego, California, using the fastest traceable shipping means. The agreement mandates strict adherence to DLA technical and quality requirements, including specific sampling methods per MIL-STD-1916 or ASQ H1331. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and RP001 DLA packaging requirements. Inspection and acceptance will take place at the destination, and the contract specifies a zero percent quantity variance.

Totalizing Fluid Meter and Counting Device Manufacturing

POSTED

about 3 hours ago

DEADLINE

Solicitation # SPE4A5-26-T-368K

This solicitation, number SPE4A5-26-T-368K, is for the procurement of three lever assemblies under NAICS code 336412 for the Department of Defense. Offerors must provide details regarding dealer or distributor certifications and are encouraged to submit quantity ranges to accommodate potential demand volatility. The contract requires strict adherence to domestic material restrictions, including the Buy American Act and the Berry Amendment, and prohibits the use of covered telecommunications equipment. Submission of a No Bid quote with an anticipated date is requested for those unable to quote by the deadline to inform buyers of intent. Additionally, all contractors must prepare for a transition to the Account Management and Provisioning System for Vendor Shipment Module access. Additive manufacturing is prohibited unless specifically authorized by the contracting officer. The delivery requirement is set for 704 days after the order.

Aircraft Engine and Engine Parts Manufacturing

POSTED

about 3 hours ago

DEADLINE

Solicitation # SPE4A5-26-T-368P

This contract, identified by solicitation number SPE4A5-26-T-368P, is for the procurement of four flow dampeners, part number 161607-106, manufactured by Hydraulics International, Inc. The items are identified by NSN 4920-01-668-4835 and are to be delivered to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The required delivery date is July 17, 2026, with a delivery window of 167 days after the order. The agreement specifies that delivery, inspection, and acceptance will occur at the point of origin. Packaging and marking must strictly adhere to MIL-STD-2073-1E and MIL-STD-129, with palletization following RP001 requirements. There is no allowed quantity variance for this order. The procurement is managed by the Department of Defense under the ASC Supplier Oper OEM Division.

Other Electronic Component Manufacturing

POSTED

about 3 hours ago

DEADLINE

GOVERNMENT FIRST ARTIC

Solicitation # SPE4A5-26-T-368B

This contract is a solicitation from the Department of Defense, specifically the ASC Supplier Oper OEM Division, for the procurement of six drive shaft actuators under solicitation number SPE4A5-26-T-368B. The delivery requirement is set for 171 days after the order is placed. The procurement is governed by the DLA Master List of Technical and Quality Requirements, including specific mandates for source approval requests, packaging, and inspection and acceptance at origin. The contract imposes strict compliance standards, including CMMC Level 2 certification and adherence to Qualified Products Lists or Qualified Manufacturers Lists. Significant restrictions are placed on the export of technical data, requiring compliance with ITAR and EAR regulations. Access to this data is limited to contractors with approved US/Canada Joint Certification Program certification and completed export-control training.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

HOSE ASSEMBLY, AIR D

Solicitation # SPE4A5-26-T-368N

This contract is for the procurement of two air duct hose assemblies, identified as NSN 4720-01-018-6580 and Boeing part numbers 10-60023-2 and BOE2090-0002. The items are designated as critical application items and must adhere to strict quality and technical standards, including ISO 9001:2015 for manufacturers and specific DLA master list requirements. Sampling and inspection will be conducted at the destination according to MIL-STD-1916 or ASQ H1331, with a zero-tolerance policy for non-conformances in certain sample lots. The delivery is set for FOB Origin with a required ship date of July 18, 2028, and a delivery window of 692 days. Packaging must comply with ASTM D3951 and MIL-STD-129, while palletization must follow DLA packaging requirements. The final destination for the shipment is the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. Item Unique Identification is not required for this specific order per the service customer's request.

Rubber and Plastics Hoses and Belting Manufacturing

POSTED

about 3 hours ago

DEADLINE

Solicitation # SPE4A5-26-T-368E

This contract is for the procurement of 55 sleeve spacers under solicitation SPE4A5-26-T-368E for the Department of Defense. The items are identified by NSN 5365-01-057-7101 and are associated with part number 3833145-1 from manufacturers Lockheed Martin Corporation and Parker-Hannifin Corporation. Delivery is required within 20 days, with shipping handled FOB Origin to the Government of Israel Ministry of Defense via G&B Packing Company. The agreement mandates strict adherence to DLA technical and quality requirements, including specific packaging and marking standards such as MIL-STD-129 and MIL-STD-2073-1E. Quality assurance is governed by MIL-STD-1916 or ASQ H1331 sampling plans, with a zero-tolerance policy for non-conformances in sample lots. The contract specifies that inspection and acceptance will occur at the point of origin.

Hardware Manufacturing

POSTED

about 3 hours ago

DEADLINE

RETAINER, VALVE

Solicitation # SPE4A5-26-T-368R

This contract is for the procurement of two valve retainers, identified as NSN 1615-01-201-9628 and Boeing part number A02R2764-1. The items are designated as critical application items and must be delivered within 10 days of order. Delivery is set as FOB Origin, with both inspection and acceptance occurring at the destination, which is the US Army SSA in Powidz, Poland. The agreement mandates strict adherence to the DLA Master List of Technical and Quality Requirements, including specific standards for source approval, covered defense information, and configuration change management. Packaging must comply with ASTM D3951 and MIL-STD-129, while sampling and inspection must follow MIL-STD-1916 or ASQ H1331. Item Unique Identification is not required for this specific order.

Aircraft Manufacturing

POSTED

about 3 hours ago

DEADLINE

GEARSHAFT, MULTIPLE GEA

Solicitation # SPE4A5-26-T-368J

This solicitation, issued by the Department of Defense under the ASC Supplier OEM Division, is for the procurement of 12 units of a multiple gear gearshaft, identified by NSN 3040-01-032-4216. The contract requires delivery within 170 days after the order date, with the place of performance located at Tinker AFB. The agreement is subject to strict technical and quality requirements, including CMMC Level 2 self-assessment and specific DLA packaging and marking standards. Notably, the item contains technical data subject to ITAR or EAR export controls, requiring contractors to have an approved US/Canada Joint Certification Program certification and completed export-control training to access the data. Item Unique Identification is not required for this specific request.

Mechanical Power Transmission Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE