Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

Technical Variance (TV) analysis and engineering assessment services for a Rolls-Royce BR710-A1-10 engine installed on NASA Gulfstream G-V aircraft.

Active
80NSSC26940888QFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

NASA/NSSC is seeking Technical Variance (TV) analysis and engineering assessment services for the Rolls-Royce BR710-A1-10 engine installed on its Gulfstream G-V aircraft, with intent to award a sole source contract to Rolls-Royce PLC under FAR 12.102(a) due to its unique status as the sole provider of these specialized services. The procurement will be managed by NASA Shared Services Center and performed at NASA Armstrong Flight Research Center, leveraging commercial item acquisition procedures outlined in FAR Part 12, and is classified under NAICS code 336412. All correspondence must reference Notice ID 80NSSC26940888Q, and interested parties may submit written capabilities and qualifications by 10:00 a.m. Central Standard Time on August 3, 2026, to allow the government to evaluate whether a competitive approach is warranted—oral communications are not permitted. The NASA FAR Supplement Clause 1852.215-84 regarding the Ombudsman applies, and inquiries should be directed to Laura Quave or Will Garrett via their official NASA email addresses.

General Info

NASA seeks sole-source TV analysis for Rolls-Royce BR710 engine on G-V aircraft under FAR Part 12.

Agency

National Aeronautics And Space Administration → NASA Shared Services CenterView Agency

NAICS

336412 - Aircraft Engine and Engine Parts ManufacturingView NAICS

Place of Performance

MS, USA

Set-Aside

NONE

Documents

(1)

SATPC0042247+Tab+07+Capability+Statement+Template.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

Posted

special-notice

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyNational Aeronautics And Space Administration → NASA Shared Services Center
Contacts1 person available
OfficeSTENNIS SPACE CENTER, MS, 39529, USA
Organization / Agency
National Aeronautics And Space Administration → NASA Shared Services Center
View Agency Profile
Office AddressSTENNIS SPACE CENTER, MS, 39529, USA
Contacts
Will Garrett
contact@example.gov

Full Description

Show more

All correspondence should reference Notice ID 80NSSC26940888Q in the subject line.


Synopsis:


NASA/NSSC has a requirement for Technical Variance (TV) analysis and engineering assessment services for a Rolls-Royce BR710-A1-10 engine installed on NASA Gulfstream G-V aircraft.


NASA/NSSC intends to issue a sole source contract to ROLLS-ROYCE PLC Kings Place 90 York WAY London N1 9FX, United Kingdom  under the authority of FAR 12.102(a). It has been determined that ROLLS-ROYCE PLC  is the sole provider of Technical Variance (TV) analysis and engineering assessment services for a Rolls-Royce BR710-A1-10 engine installed on NASA Gulfstream G-V aircraft   .


NASA/NSSC will be the procuring center for this effort. Performance will be located at NASA/ Armstrong Flight Research Center (AFRC).


The Government intends to acquire Commercial items or services using the provisions, clauses and procedures prescribed in FAR Part 12 for Commercial


The NAICS Code for this procurement is 336412.


Interested organizations may submit their capabilities and qualifications to perform the effort in writing to the identified point of contact not later than 10:00 a.m. Central Standard Time on 8/3/2026. Such capabilities/qualifications will be evaluated solely for the purpose of determining whether or not to conduct this procurement on a competitive basis. A determination by the Government not to compete this proposed effort on a full and open competition basis, based upon responses to this notice, is solely within the discretion of the government.


Oral communications are not acceptable in response to this notice.


NASA FAR Supplement Clause 1852.215-84, Ombudsman, is applicable. The Center Ombudsman for this acquisition can be found at https://www.hq.nasa.gov/office/procurement/regs/Procurement-Ombuds-Comp-Advocate-Listing.pdf .



Primary Point of Contact:



Laura Quave


Procurement Specialist II


laura.a.quave@nasa.gov



Alternate Point of Contact:


Will Garrett


Contract Specialist


will.c.garrett@nasa.gov

Similar Contracts

Same NAICS industry code

NAICS: 336412
New
DIBBS
LOCK, COMPRESSOR BLADE, AIRCRAFT GAS TURBI
Solicitation # SPE4A7-26-R-0694
This contract pertains to the procurement of a Critical Safety Item (CSI) designated as a LOCK, COMPRESSOR BLADE for aircraft gas turbine applications, identified by NSN 2840-01-723-4515 and part number 2949M03P01, with a firm fixed price of $0 for 640 units. The item is classified as a Commercial Off-The-Shelf (COTS) product and is subject to stringent quality and packaging standards, including compliance with MIL-STD-129 for marking, MIL-STD-2073-1E for packaging, and DLA’s packaging requirements. Each unit must be marked with the contractor’s and actual manufacturer’s Cage codes, part number, lot number, and serial number where applicable, with no deviation permitted without explicit approval from the DSC Contracting Officer. Inspection and acceptance occur at origin, and nonconforming items must have government identification removed prior to return. The contractor is required to adhere to SAE AS9100 quality management standards, cybersecurity maturity model certification (CMMC) Level 2 self-assessment, and documentation requirements outlined in the DLA Master List of Technical and Quality Requirements. Delivery is scheduled 274 days after award, with FOB origin, and no variance in quantity is permitted. The contract incorporates standard FAR Part 12 commercial item clauses with specific deviations, including termination for convenience or cause, payment terms, and compliance with the Prompt Payment Act. Additional clauses mandate reporting obligations, subcontractor restrictions, anti-kickback protections, and adherence to trade agreements, while prohibiting procurement from entities tied to state sponsors of terrorism or the Xinjiang Uyghur Autonomous Region. The contractor must retain supply chain traceability data and comply with electronic submission protocols through DIBBS or ANSI X12 EDI systems, and all correspondence, documentation, and packaging must be in English and conform to strict DoD standards.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 14 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 336412
New
Federal
New Manufacture Material: NSN: 2915-01-462-6011 PR (3R)
Solicitation # SPRTA1-26-R-0337
The solicitation seeks the procurement of 51 units of the FUEL CONTROL,AFTERB, identified by NSN 2915-01-462-6011 PR and part number 1459M17G06, for use on the F110 engine. This component is critical for augmented engine operation, as it receives fuel from the augmentor fuel pump and distributes it to the local, core, and fan fuel manifolds. The action is directed by the Department of Defense through DLA Aviation at Tinker AFB, Oklahoma, under RFP number SPRTA1-26-R-0337, with a proposed issuance date of July 29, 2026, and a response deadline of August 28, 2026. Delivery is required by May 31, 2027, to shipment location SW3211. The government intends to award this contract on a sole-source basis under FAR 6.302, as GE Aviation is currently the only known source capable of meeting the technical requirements, though the decision to compete remains at the government's discretion. Although the acquisition does not fall under commercial item procedures in FAR Part 12, suppliers may still submit commercial item alternatives within 15 days of the notice. Electronic submission is mandatory, with no telephone inquiries permitted. An Ombudsman is available to address contractor concerns confidentially but does not engage in evaluation or selection. All inquiries must be directed to Breann Irving via email or fax, and the solicitation will be accessible on SAM.gov on the release date.
Ok DLA Aviation At Oklahoma City

POSTED

about 19 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 336412
New
Federal
SPRTA1-26-R-0357 (NSN:4710003957077 NZ)
Solicitation # SPRTA126R0357
The contract solicitation SPRTA1-26-R-0357 seeks the procurement of a right anti-icing manifold tube assembly, identified by part number 4040924A and national stock number 4710003957077NZ, designed to channel air from the 13th stage compressor case through hollow leading edge vanes on the Engine TF-100. The item is to be manufactured from TI alloy, with a base quantity requirement of 22 units and a flexible procurement range allowing a minimum of 5, a median of 22, and a maximum of 33 units. Only qualified sources, currently listing Raytheon Tech Corp as an approved supplier, are eligible, and all responsible parties may respond, provided they meet strict qualification requirements outlined in FAR Clause 52.209-1 or 52.209-2, which must be satisfied at the time of award. The acquisition does not fall under FAR Part 12 for commercial items, though offerors have 15 days from the notice to propose commercial alternatives if capable of meeting the requirement. Electronic submission via Sam.gov is mandatory, with no telephone requests permitted; only written or faxed inquiries are accepted, and the full solicitation will be available for download on its release date. Export control regulations apply to this transaction, and it is subject to Free Trade Agreements. An ombudsman has been designated to receive and relay confidential concerns from offerors during the proposal phase, ensuring open communication without influencing evaluation or source selection. The estimated issue date is June 29, 2026, and proposals must be submitted by the closing date of July 14, 2026. The procurement is managed by the Department of Defense through DLA Aviation at Tinker AFB, Oklahoma, with point of contact available for technical and procedural inquiries. No set-aside provisions are in effect, and while detailed evaluation factors or delivery terms are not yet published, qualification and compliance remain paramount for award consideration.
Ok DLA Aviation At Oklahoma City

POSTED

about 19 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 336412
New
Federal
SEAL,METALLIC,AIRCR _End_Item_F110_NSN_2840013087046PR_PN_1441M38G06
Solicitation # FD20302700157
The United States Air Force, through the 421st Supply Chain Management Squadron at Tinker Air Force Base, Oklahoma, is conducting market research to identify potential sources for the new manufacture of a metallic aircraft seal with part number 1441M38G06 and NSN 2840013087046PR, intended for use on the F110 platform. This effort, identified by Notice ID FD20302700157, is a Sources Sought Synopsis issued under FAR Part 10 solely for planning purposes and does not constitute a solicitation or binding commitment. The Government seeks to determine if the requirement can be fulfilled through competitive acquisition or a small business set-aside, emphasizing interest in all categories of small businesses including small disadvantaged, 8(a), service-disabled veteran-owned, HUBZone, and women-owned firms. The estimated requirement spans June 2026 to June 2027, with potential sources expected to have the capability to manufacture the item from raw components through final inspection, testing, packaging, and delivery, while also addressing supply chain challenges such as diminishing manufacturing sources and long-lead procurement. Technical qualification requires submission of a Source Approval Request (SAR) package through DoD SAFE, with qualification requirements referenced via MQR-PSD-1 and an accompanying Engineering Data List, though no drawings are guaranteed from the Government. Vendors must complete a standardized form to request any available engineering drawings through the Tinker Engineering Public Sales Desk and provide detailed business information including CAGE code, UEI, NAICS classification, and small business certifications. Responses must be submitted by August 31, 2026, and are strictly limited to written submissions via email; no oral responses or inquiries to the originating office are permitted. No funds are available for this market research phase, and any future contract award will be based on a separate solicitation to be issued after analysis of responses received.
Ok DLA Aviation At Oklahoma City

POSTED

about 19 hours ago

DEADLINE

in 30 days
View Details
NAICS: 336412
New
Federal
MOUNTING RING,TURBI_End_Item_F110_NSN_2840013080815PR _PN_1364M37G02
Solicitation # FD20302700143
The U.S. Air Force, through the 421st Supply Chain Management Squadron at Tinker Air Force Base, Oklahoma, is conducting market research to identify qualified sources for the new manufacture of a Mounting Ring, Turbi, identified by NSN 2840013080815PR and Part Number 1364M37G02, intended for use on the F110 platform. This sources sought notice, issued under FAR Part 10, is not a solicitation or a commitment to award a contract; no funds are currently available, and no contractual obligation will result from responses. The Government seeks information from potential suppliers—including large and small businesses, small disadvantaged businesses, 8(a) firms, service-disabled veteran-owned small businesses, HUBZone firms, and women-owned small businesses—to assess market capability, determine competitiveness, and evaluate the feasibility of a small business set-aside. Responses are required to include detailed business information such as company name, address, CAGE code, UEI, size status under NAICS code 336412 (with a 1,500-employee size standard), ownership classification, and certification statuses. Suppliers must demonstrate the ability to entirely manufacture the item from component parts through final inspection, testing, packaging, and shipping, and may be responsible for nonrecurring engineering costs, supply chain management, and mitigating diminishing manufacturing sources. To qualify, vendors must complete a Source Approval Request (SAR) package, submitted electronically via DoD SAFE, and adhere to the Manufacturing Qualification Requirements (MQR) referenced by keyword MQR-PSD-1 on SAM.gov. Engineering drawings, if applicable, must be requested using the official form and submitted to the designated Tinker Engineering Public Sales Desk. Responses must be received by August 30, 2026, and all communication must be directed to the specified workflow email; direct contact with the originating office is prohibited.
Ok DLA Aviation At Oklahoma City

POSTED

about 19 hours ago

DEADLINE

in 30 days
View Details
NAICS: 336412
New
Federal
TRANSMITTER, TEMPERA_End_Item_F110_NSN_6685015204684PR _PN_960M40P06
Solicitation # FD20302700149
The U.S. Air Force, through the 421st Supply Chain Management Squadron at Tinker Air Force Base, Oklahoma, is conducting market research to identify qualified sources for the new manufacture of the Transmitter, Tempera with National Stock Number 6685-01-520-4684PR and Part Number 1960M40P06, intended for use on the F110 platform. This initiative is a Sources Sought Synopsis issued under FAR Part 10 for informational and planning purposes only, with no solicitation, funding, or contractual commitment currently available. The government seeks responses from businesses capable of end-to-end manufacturing, including component procurement, inspection, testing, preservation, packaging, shipping, and management of supply chain risks such as diminishing manufacturing sources and material shortages. All potential vendors, including Small Businesses, Small Disadvantaged Businesses, 8(a) concerns, Service-Disabled Veteran-Owned Small Businesses, HUBZone firms, and Women-Owned Small Businesses, are encouraged to respond. Participation requires submission of a Source Approval Request (SAR) package via DoD SAFE and adherence to the Qualification Requirements accessible through SAM.gov using keyword MQR-PSD-1. Engineering Data Lists and drawings referenced in the notice are available through the Tinker Engineering Drawings Public Sales Desk, with requests needing to be submitted via a standardized Excel form. Companies must provide comprehensive business information including CAGE code, UEI, NAICS classification, small business certifications, ownership status, and contact details by the response deadline of August 8, 2026. The North American Industry Classification System code 336412 applies, with a size standard of 1,500 employees, and the government retains the right to determine whether the requirement will be awarded competitively or as a small business set-aside. All submissions must be electronic; oral responses are not accepted, and inquiries must be directed exclusively to the designated workflow email addresses.
Ok DLA Aviation At Oklahoma City

POSTED

about 19 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336412
New
Federal
ROTOR,TURBINE,AIRCR_End_Item_F110_NSN_2840015975182PR_PN_9547M19G13
Solicitation # FD20302700172
The United States Air Force, through the 421st Supply Chain Management Squadron at Tinker Air Force Base, Oklahoma, is conducting market research to identify qualified sources for the new manufacture of a turbine rotor component identified by NSN 2840015975182PR and part number 9547M19G13, intended for use on the F110 aircraft platform. This sources sought notice is not a solicitation or commitment to award a contract; no funds are available at this time, and the purpose is purely to assess industry capability and determine whether the requirement can be competitively sourced or set aside for small businesses, including 8(a), service-disabled veteran-owned, woman-owned, HUBZone, and small disadvantaged businesses. The estimated spares requirement spans June 2026 to June 2027, and potential vendors must be capable of full manufacturing, including component procurement, inspection, testing, packaging, shipping, and addressing challenges such as diminishing manufacturing sources and long-lead parts. Technical data requirements are critical: while an Engineering Data List and Manufacturing Qualification Requirements (MQR) are referenced, no government-provided technical data is guaranteed, meaning contractors may need to independently acquire necessary drawings and specifications. Requests for engineering drawings must be submitted via a standardized Excel form to the public sales desk at Tinker AFB, and all source approval submissions must be made through the DoD SAFE system using electronic packages. Companies must provide comprehensive business information—such as CAGE code, UEI, NAICS classification, and small business certifications—by the response deadline of August 8, 2026, to be considered. The acquisition strategy remains under review, and the government may further break the requirement down by airframe or manufacturing method based on market feedback. All communications must be directed to designated workflow emails, with no inquiries accepted from the originating office.
Ok DLA Aviation At Oklahoma City

POSTED

about 19 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336412
New
Federal
SPRTA1-26-R-0369 (NSN:2915012240778)
Solicitation # SPRTA126R0369
The contract solicitation SPRTA1-26-R-0369 seeks a Module Kit, Sensor, T with NSN 2915012240778NZ and part number 351000, designed for use on the F-100 engine. The item is specified as a temperature sensor for the MFC component, manufactured from TI alloy, with a projected requirement of 15 units—minimum of 4, median of 15, and maximum of 23. The acquisition is restricted to qualified sources, with Honeywell identified as the sole approved manufacturer under code 06848. The solicitation employs electronic procedures, and only written or faxed requests from eligible parties are accepted; no telephone inquiries will be entertained. The government is not utilizing FAR Part 12 commercial item acquisition policies but invites offerors to demonstrate if a commercial item can meet the requirement within 15 days of notice. Awards are contingent upon the offeror, product, or manufacturer meeting all qualification criteria per FAR clauses 52.209-1 or 52.209-2 at time of award. An Ombudsman is available to confidentially address contractor concerns during proposal development but does not participate in evaluations or source selection. Export controls do not apply to this procurement. The estimated issue date for the solicitation is July 21, 2026, with a response deadline of August 21, 2026, though the posted response deadline in the data is July 22, 2026. The solicitation will be accessible solely via Sam.gov, with no telephone requests permitted. Questions must be directed to Al Dacalio at the provided email or phone number, or via fax to DLA Aviation-AOAA at Tinker AFB, OK. The contract falls under NAICS code 336412 and is administered by the Department of Defense through the Oklahoma City office of DLA Aviation. Free trade agreements may apply to this acquisition, and all responsible sources are eligible to submit bids or proposals. The acquisition does not employ any set-aside programs and is open to full and open competition.
Ok DLA Aviation At Oklahoma City

POSTED

about 19 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 336412
New
Federal
COMPUTER,ENGINE _End_Item_F110_NSN_6620015616852PR _PN_2125M76P06
Solicitation # FD20302700160
The U.S. Air Force, through the 421st Supply Chain Management Squadron at Tinker Air Force Base, Oklahoma, is conducting market research to identify potential sources for the new manufacture of a spare component identified by NSN 6620015616852PR and part number 2125M75P06, intended for the F110 engine platform. This initiative, issued as a Sources Sought synopsis under FAR Part 10, is not a solicitation and does not obligate the government to award a contract or allocate funds; its purpose is to assess industry capability and determine whether the requirement can be competed broadly or set aside for small businesses including Small Disadvantaged Businesses, 8(a) firms, Service-Disabled Veteran-Owned Small Businesses, HUBZone firms, and Women-Owned Small Businesses. The requirement involves the complete new manufacture of the item, including procurement of component parts, inspection, testing, packaging, shipping, and management of supply chain complexities such as diminishing manufacturing sources and long-lead procurement. Companies must demonstrate the ability to meet Manufacturing Qualification Requirements (MQRs) and submit a Source Approval Request (SAR) package via DoD SAFE, with official QRs available through SAM.gov using keyword MQR-PSD-1. Engineering data, if available, is annotated on an embedded Engineering Data List, and requests for drawings must follow the prescribed form and be submitted to the designated Tinker Engineering Public Sales Desk. All responses must be submitted by August 8, 2026, and include comprehensive business information such as CAGE code, UEI, NAICS classification under 336412 with a 1,500-employee size standard, and status certifications. The estimated spares requirement spans June 2026 to June 2027, and the government may consider breaking the requirement by airframe to enhance competition. Participation requires completion of the business information form and adherence to submission protocols; no oral submissions are accepted and inquiries must be directed exclusively to the specified email contacts.
Ok DLA Aviation At Oklahoma City

POSTED

about 19 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336412
New
Federal
SUPPORT,TURBINE COM_End_Item_F110_NSN_2840013119977PR_PN_1386M20G04
Solicitation # FD20302700174
The U.S. Air Force, through the 421st Supply Chain Management Squadron at Tinker Air Force Base, Oklahoma, is conducting market research to identify qualified sources for the new manufacture of a turbine support component identified by NSN 2840013119977PR and part number 1386M20G04, intended for use on the F110 engine platform. This effort, issued as a Sources Sought Synopsis under FAR Part 10, is not a solicitation and does not constitute a commitment to award a contract or allocate funds; its purpose is to assess industry capability, determine competitive potential, and evaluate whether the requirement may be suitable for a small business set-aside. Interested vendors must demonstrate the ability to perform full new manufacture including procurement of components, inspection, testing, packaging, shipping, supply chain management, and handling of diminishing manufacturing sources and material shortages. Applicants may also be responsible for nonrecurring engineering costs to attain approved source status. Technical qualification requires submission of a Source Approval Request (SAR) package through DoD SAFE, accompanied by compliance with Manufacturing Qualification Requirements referenced as MQR-PSD-1 and adherence to the Engineering Data List, which may require separate requests for drawings via a standardized form and payment of administrative fees. Responses must include detailed business information such as CAGE and UEI codes, NAICS classification under 336412 with a 1,500-employee size standard, and certification status for various small business categories including 8(a), HUBZone, woman-owned, service-disabled veteran-owned, and disadvantaged businesses. The government accepts submissions only through the designated email until August 31, 2026, and explicitly prohibits direct contact with the originating office for questions. All information provided will be used solely for acquisition planning and will not result in payment or obligation.
Ok DLA Aviation At Oklahoma City

POSTED

about 19 hours ago

DEADLINE

in 30 days
View Details
NAICS: 336412
New
Federal
Overspeed Governor_End_Item__NSN_2840014888016OK_PN_5126T33P02
Solicitation # FD20302700164
The U.S. Air Force, through the 421st Supply Chain Management Squadron at Tinker Air Force Base, Oklahoma, is conducting market research to identify qualified sources for the new manufacture of an overspeed governor, identified by part number 5126T33P02 and NSN 2840-01-488-8016, intended for use on the J85 engine platform. This effort is a Sources Sought Synopsis under FAR Part 10, not a solicitation, and no contract award is anticipated from this posting. The government seeks to determine potential vendor capabilities, assess competitiveness, and evaluate whether the requirement may be set aside for small businesses, including Small Disadvantaged Businesses, 8(a) firms, Service-Disabled Veteran-Owned Small Businesses, HUBZone businesses, and Women-Owned Small Businesses. Companies must be capable of full-scale manufacturing of the component, including procurement of parts, inspection, testing, packaging, shipping, supply chain management, and addressing diminishing manufacturing sources and material shortages. Nonrecurring engineering costs associated with qualification may be required. Participation requires completion of a Source Approval Request (SAR) package submitted electronically via DoD SAFE, along with adherence to specified Manufacturing Qualification Requirements and Engineering Data List guidelines. Engineering drawings, if needed, must be requested using a standardized form sent to the Tinker Engineering Drawings Public Sales Desk. Interested vendors must respond by August 7, 2026, providing detailed business information including CAGE code, NAICS classification, size status, UEI, ownership structure, and certification designations. The estimated spares requirement is through December 31, 2027, with no repair component anticipated. All submissions are for planning purposes only, with no funding or contractual obligation attached.
Ok DLA Aviation At Oklahoma City

POSTED

about 19 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336412
New
Federal
NOZZLE,TURBINE,AIRC_End_Item_F110_NSN_2840015975183PR_PN_9547M20G05
Solicitation # FD20302700128
The U.S. Air Force, through the 421st Supply Chain Management Squadron at Tinker Air Force Base, Oklahoma, is conducting market research to identify qualified sources capable of manufacturing new spares for the F110 engine nozzle, identified by NSN 2840015975183PR and part number 9547M20G05. This is not a solicitation or commitment to award a contract, and no funds are currently available; the intent is solely to assess industry capability, determine whether the requirement can be competitively sourced, and evaluate potential for a small business set-aside. Interested vendors must be prepared to handle full new manufacture of the item, including procurement of components, inspection, testing, packaging, shipping, supply chain management, logistics planning, production forecasting, and mitigation of diminishing manufacturing sources and material shortages, with potential responsibility for nonrecurring engineering costs to qualify as an approved source. Technical data requirements are specified through the Manufacturing Qualification Requirements (MQR-PSD-1), which must be reviewed via SAM.gov, and Engineering Data Lists (EDLs) provided by the government are annotated; the absence of an EDL obligates bidders to independently obtain necessary technical specifications. Requests for engineering drawings must be submitted using a standardized form to the designated public sales desk, with a $107 administrative fee applicable. Participation requires completion of a Source Approval Request (SAR) package submitted electronically via DoD SAFE, with submission instructions and contact details provided for AFSC Small Business Office support. Responses must include detailed business information such as company name, CAGE code, UEI, size status under NAICS 336412 (1,500-employee size standard), and certifications including small business, women-owned, disadvantaged, 8(a), HUBZone, and service-disabled veteran-owned status, along with ownership origin. The response deadline is August 8, 2026, and estimated spares demand spans June 2026 to June 2027. All communications must be directed to the specified email addresses, with no inquiries permitted to the originating office.
Ok DLA Aviation At Oklahoma City

POSTED

about 19 hours ago

DEADLINE

in 7 days
View Details

More opportunities from National Aeronautics And Space Administration → NASA Shared Services Center

Same awarding agency

NAICS: 334516
New
Federal
Gas Chromatograph/Coupled Plasma Optical Emission Spectrometer
Solicitation # 80NSSC26939493Q
NASA Shared Services Center, on behalf of the National Aeronautics and Space Administration, has issued a small business set-aside solicitation for a Gas Chromatograph/Coupled Plasma Optical Emission Spectrometer under solicitation number 80NSSC26939493Q. The solicitation is open to small businesses as defined by the Small Business Administration, with the North American Industry Classification System code 334516, and requires responses by August 7, 2026, at 8:00 PM Eastern Time. The contract will be performed at the Stennis Space Center in Mississippi, with primary point of contact McKenzie Hanson and secondary contact Shari Trigg available for inquiries via email. The equipment is intended to support critical scientific analytical needs within NASA’s operations, and all submissions must comply with the technical and procurement requirements detailed in the attached RFQ. Interested parties can access the full solicitation through the provided SAM.gov link.
Analytical Laboratory Instrument Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334519
New
Federal
Purchase of Lightning Data from Vendor for GOES-R GLM Validation Support
Solicitation # 80NSSC26938561Q
NASA/NSSC is advancing a sole source procurement for the purchase of lightning data from Vaisala Inc. to support validation of the GOES-R Geostationary Lightning Mapper, under FAR 12.102(a), determining Vaisala Inc. as the sole provider capable of fulfilling this specific requirement. The acquisition will be conducted as a commercial item procurement under FAR Part 12, with performance located at NASA’s Marshall Space Flight Center and classified under NAICS code 334519. The request for capability and qualification submissions is open until 3:00 p.m. Central Standard Time on August 5, 2026, with written responses only accepted; oral communications are prohibited. The Government retains full discretion to determine whether competition is warranted based on submissions. This procurement falls under the 8(a) Sole Source program and is managed by the NASA Shared Services Center, with McKenzie Hanson as the primary point of contact and the NASA FAR Supplement Clause 1852.215-84, Ombudsman, applicable for procedural guidance.
Other Measuring and Controlling Device Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 5 days
View Details
NAICS: 334515
New
Federal
FY26 SF3 Acoustics BK Connect Renewal
Solicitation # 80NSSC26940288Q
The contract titled FY26 SF3 Acoustics BK Connect Renewal is a solicitation issued by the NASA Shared Services Center under the National Aeronautics and Space Administration for the renewal of acoustic analysis software licensing and related services. The solicitation number is 80NSSC26940288Q, with a posted date of July 31, 2026, and a strict response deadline of August 4, 2026, at 6:00 PM Eastern Time. Responses must be submitted as a capability statement only; quotes will not be accepted under any circumstances. The North American Industry Classification System code is 334515, indicating the requirement is for instrumentation and laboratory equipment manufacturing, specifically acoustic measurement and analysis tools. The performing location is Houston, Texas, with a zip code of 77058, while the office address for the contracting entity is located at Stennis Space Center, Mississippi. All inquiries and submissions should be directed to Cara Craft, the primary point of contact, via email at cara.s.craft@nasa.gov. This is a special notice opportunity with no set-aside designation specified.
Instrument Manufacturing for Measuring and Testing Electricity and Electrical Signals

POSTED

about 19 hours ago

DEADLINE

in 3 days
View Details
NAICS: 513210
New
Federal
BK CONNECT DATA SOFTWARE RENEWAL
Solicitation # 80NSSC26940288
NASA/NSSC plans to award a sole source contract to HOTTINGER BRUEL & KJAER INC. for the FY26 renewal of SF3 Acoustics BK Connect software, recognizing them as the exclusive provider of this commercial item under FAR 12.102(a). The acquisition will be managed by NASA/NSSC with performance taking place at NASA Johnson Space Center, and the procurement will follow commercial item procedures outlined in FAR Part 12. The NAICS code for this effort is 513210, and the solicitation number is 80NSSC26940288. Interested parties may submit written capabilities and qualifications by 1:00 p.m. Central Standard Time on August 4, 2026, to support the government’s determination on whether to pursue a competitive process, though oral submissions are not permitted. The government retains full discretion to proceed without competition based on these submissions. The NASA FAR Supplement Clause 1852.215-84, Ombudsman, applies, and information on the Center Ombudsman is available via the provided NASA link. Primary point of contact is Cara Craft at cara.s.craft@nasa.gov, with secondary contact Tiffany Neal at Tiffany.neal@nasa.gov.
Software Publishers

POSTED

about 19 hours ago

DEADLINE

in 3 days
View Details
NAICS: 541715
New
Federal
In-situ current voltage measurement of solar cells on the International Space Station.
Solicitation # 80NSSC26937840Q
NASA/NSSC is seeking to procure in-situ current voltage measurement services for solar cells on the International Space Station through a sole source contract awarded to ANGSTROM DESIGNS INC, identified as the sole provider of this specialized capability. The procurement will be conducted under FAR Part 12 as a commercial item acquisition, with performance located at NASA’s Glenn Research Center and governed by the NAICS code 541715. All correspondence must reference Notice ID 80NSSC26937840Q, and interested parties may submit written capabilities and qualifications by 3:00 p.m. Central Standard Time on August 4, 2026, to assist the government in determining whether competitive bidding is warranted—though no obligation to compete is guaranteed. Oral communications are prohibited in response to this notice. The NASA FAR Supplement Clause 1852.215-84 applies, and the Center Ombudsman is available for procedural guidance. The primary point of contact is Laura Quave, Procurement Specialist II, with Karen Artis listed as a secondary contact.
Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

about 19 hours ago

DEADLINE

in 4 days
View Details
NAICS: 611430
New
Federal
EXTREME OWNERSHIP TRAINING
Solicitation # 80NSSC26938952
The contract titled EXTREME OWNERSHIP TRAINING is a Small Business Set Aside solicitation issued by the NASA Shared Services Center under the National Aeronautics and Space Administration, with solicitation number 80NSSC26938952 and NAICS code 611430, indicating it is for other educational support services. The opportunity is exclusively reserved for small businesses and was posted on July 31, 2026, with a sharply shortened response deadline of August 4, 2026, at 8:00 PM Eastern Time due to fiscal year-end constraints. Performance is expected to be conducted at the Stennis Space Center in Mississippi, though no specific place of performance address is detailed beyond the agency’s office location. Primary point of contact for inquiries is McKenzie Hanson, reachable at mckenzie.m.hanson@nasa.gov, with Tiffany Neal listed as secondary contact. Interested parties must submit responses via the SAM.GOV portal before the deadline to be considered for award, and full details regarding scope, deliverables, and requirements are contained in the attached Statement of Work and RFQ documents.
Professional and Management Development Training

POSTED

about 19 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332813
New
Federal
Mechanical Testing Specimen FabricationThe contract requires the fabrication and supply of specialized metallurgical test specimens including witness bars, tensile coupons, and hot cycle fatigue coupons, all designed to meet Marshall Space Flight Center guidance and integrated directly into laser powder bed fusion build plates for material qualification purposes. These specimens must be manufactured with precise dimensional and metallurgical controls to ensure accurate mechanical performance data under simulated operational conditions, supporting NASA’s mission to validate new materials and additive manufacturing processes. The work is classified under NAICS code 332813 and is structured as a subcontract, with a strict submission deadline of August 4, 2026, emphasizing the time-sensitive nature of the material qualification effort. All delivered specimens must be traceable, properly documented, and capable of being tested under standardized conditions to provide reliable data for certification purposes. The project is managed by the NASA Shared Services Center on behalf of the National Aeronautics and Space Administration, indicating involvement in a high-stakes aerospace development initiative. While no specific location for performance is listed, the requirement implies close coordination with NASA’s additive manufacturing and materials testing facilities. The solicitation is open to qualified subcontractors with demonstrated expertise in metallurgical specimen fabrication and integration within laser-based additive manufacturing systems.
Electroplating, Plating, Polishing, Anodizing, and Coloring

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 541330
New
Federal
Materials Traceability and Quality DocumentationThe contract requires full traceability documentation for all additive manufacturing builds, including detailed records of powder lot numbers, Manufacturing Traveler Logs, and the submission of a Final Build Report along with any Deviation or Nonconformance Logs. These documentation requirements ensure rigorous quality control and accountability throughout the manufacturing process, aligning with high-stakes aerospace standards. All submissions must be complete and accurate to support compliance, audit readiness, and the integrity of mission-critical components. This subcontract is issued by the NASA Shared Services Center on behalf of the National Aeronautics and Space Administration under NAICS code 541330, with a response deadline of August 4, 2026 at 5:00 PM. The solicitation was posted on July 30, 2026, and performance location details are unspecified, indicating potential flexibility in where the work is executed. The focus is on stringent quality assurance practices specific to additive manufacturing, emphasizing documentation as a core deliverable rather than just production output.
Engineering Services

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 339999
New
Federal
Ultrasonic Cleaning and Powder Removal for Additively Manufactured PartsNASA Shared Services Center is seeking a subcontractor to perform post-build ultrasonic cleaning of Inconel 718 turbine components produced through additive manufacturing, with the primary goal of removing trapped metal powder from intricate internal passages and geometries. The cleaning process must utilize isopropyl alcohol or an alternative solvent approved by the Marshall Space Flight Center to ensure compatibility with the material and avoid contamination or damage to sensitive features. This work is critical to the functional integrity of the components, as residual powder can compromise performance, thermal behavior, or structural reliability in high-stress aerospace applications. The opportunity is open for submissions until August 4, 2026, with a NAICS code of 339999 indicating it falls under other miscellaneous manufacturing. The place of performance and point of contact details are not specified, and the contract is not subject to any specific set-aside categories, making it broadly available to qualified vendors.
All Other Miscellaneous Manufacturing

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 333314
New
Federal
Additive Manufacturing of Inconel 718 Turbine Components via SLM Solutions 280The contract requires the performance of laser powder bed fusion additive manufacturing using the SLM Solutions 280 machine to produce turbine blades and shaft assemblies from Inconel 718, a high-performance nickel-based superalloy specified for its strength and thermal resistance under extreme conditions. The manufacturing process must adhere strictly to NASA-MSFC drawing MC34120-003 and the associated manufacturing plan 34120-MFG-PLAN, ensuring dimensional accuracy, material integrity, and mechanical properties aligned with NASA’s mission-critical standards. A design of experiments (DOE) component is included to systematically optimize laser parameters such as power, scan speed, hatch spacing, and layer thickness to achieve defect-free, high-density parts with consistent microstructure and mechanical performance. All work must be completed in compliance with federal procurement standards and delivered by the response deadline of August 4, 2026. The solicitation is classified as a subcontract under NAICS code 333314, indicating it pertains to the manufacturing of industrial machinery, and is managed by the NASA Shared Services Center on behalf of the National Aeronautics and Space Administration. While no specific place of performance or point of contact is provided, the nature of the work implies the need for a qualified additive manufacturing facility with demonstrated capability in aerospace-grade metal AM, experience with Inconel 718, and familiarity with NASA-specific technical documentation and quality assurance protocols.
Optical Instrument and Lens Manufacturing

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 541330
New
Federal
Alignment Assessment per Nadcap AC 7101The contract requires a mechanical alignment evaluation of a test frame to ensure compliance with Nadcap AC 7101 standards for aerospace testing equipment, ensuring precision and quality in critical testing applications. This work is scoped to assess and verify the alignment of the test frame using established aerospace industry methodologies and documentation practices, with the goal of achieving and maintaining Nadcap accreditation. The work is classified as a subcontract under NAICS code 541330, indicating specialized engineering services for analytical and testing functions within the aerospace sector. The opportunity was posted on July 30, 2026, with a response deadline of August 5, 2026, offering a narrow window for qualified vendors to submit proposals. The contracting entity is the NASA Shared Services Center on behalf of the National Aeronautics and Space Administration, underscoring the high standards and regulatory rigor associated with this requirement. While the specific location of performance is not detailed, the deliverables must meet federal aerospace testing protocols, and success will hinge on demonstrating proven expertise in Nadcap-compliant alignment procedures and documentation.
Engineering Services

POSTED

2 days ago

DEADLINE

in 4 days
View Details
NAICS: 541380
New
Federal
Torque Verification (up to 226 N-m)The contract requires performing torque verification on applicable components of a test system to ensure rotational force accuracy within a range up to 226 N-m. This task is critical for maintaining the precision and reliability of mechanical systems used in NASA’s operations. The work is classified as a subcontract under NAICS code 541380, which corresponds to scientific and technical consulting services, indicating the specialized technical expertise needed to carry out the verification process. The solicitation was posted on July 30, 2026, with a response deadline of August 5, 2026, providing a brief window for interested parties to submit proposals. The contracting agency is the NASA Shared Services Center on behalf of the National Aeronautics and Space Administration, underscoring the mission-critical nature of the work. No specific place of performance or point of contact details are provided, suggesting that the location and coordination may be determined post-award.
Testing Laboratories and Services

POSTED

2 days ago

DEADLINE

in 4 days
View Details