Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

TEE, BOSS

Active
SPE7M3-26-T-7804Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specifies the procurement of five units of part number T00043-5083-2 and its variant T00043-5083-2-SV under solicitation SPE7M3-26-T-7804, with a total value of $25.00 at $5.00 per unit. Delivery is required within 186 days to the DLA Distribution San Joaquin receiving warehouse in Tracy, California, with both inspection and acceptance occurring at destination. The delivery term is FOB origin, and no variance in quantity is permitted. Packaging must comply with ASTM D3951 and MIL-STD-129 for marking and labeling, with palletization strictly following DLA Packaging Requirements for Procurement (RP001), and all technical and quality standards referenced by R or I numbers in the DLA Master List take precedence. The Certificate of Conformance procedures under FAR 52.246-15 are authorized unless overridden by a Quality Assurance Letter of Instruction. The NSN 4730017081342 governs the material identification, and the unit of issue is each piece. The original required and needed ship date is February 16, 2027, and all transportation logistics must adhere to DLAD Proc Notes C19 and C20. The contracting office is the Fluid Handling Division within the Department of Defense, with William Cain designated as the primary point of contact.

General Info

Procure five units of T00043-5083-2 and variant at $5 each, deliver by Feb 16, 2027, to Tracy, CA, FOB origin.

Agency

Department Of Defense → FLUID HANDLING DIVISIONView Agency

NAICS

326122 - Plastics Pipe and Pipe Fitting ManufacturingView NAICS

Place of Performance

REC WHSE 57, TRACY, CA, 95304-5000, US

Set-Aside

NONE

Documents

(1)

RFQ SPE7M3-26-T-7804 for Fluid Handling Division

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → FLUID HANDLING DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → FLUID HANDLING DIVISION
View Agency Profile
Office AddressUS
Contacts
William Cain
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
TEE,BOSS
TEE,BOSS
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
CERTIFICATE OF CONFORMANCE PROCEDURES (FAR 52.246-15) ARE AUTHORIZED,
UNLESS WITHELD BY A QUALITY ASSURANCE LETTER OF INSTRUCTION.
HDT EXPEDITIONARY SYSTEMS INC 92878 P/N T00043-5083-2
HDT EXPEDITIONARY SYSTEMS INC 92878 P/N T00043-5083-2-SV
TDP Rev A Gen 1 IAW REFERENCE REVISION NR DTD PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017698118 0001 EA 5.000
NSN/MATERIAL:4730017081342
DELIVERY (IN DAYS):0186
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
SPE7M3-26-T-7804
SECTION B
PR: 7017698118 PRLI: 0001 CONT’D
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN ROAD
REC WHSE 57
TRACY CA 95304-5000
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN ROAD
REC WHSE 57
TRACY CA 95304-5000
US
Need Ship Date:02/16/2027 Original Required Delivery Date:02/16/2027
SPE7M3-26-T-7804 NSN/Part Number: 4730-01-708-1342 Quantity: 5 EA Purchase Request: 7017698118QTY: 5 Delivery: 186 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 326122
New
DIBBS
COUPLING, PIPE
Solicitation # SPE7M0-26-T-025R
The contract pertains to a single coupling, pipe with National Stock Number 4730-99-551-6649 and a purchase request number 7017688324, requiring delivery of one unit within five days after award. The item must be manufactured and packaged in strict compliance with ASTM D3951 and MIL-STD-129, and all packaging, marking, and labeling must align with DLA’s Master List of Technical and Quality Requirements, which supersede any conflicting standards. Packaging must adhere to DLA’s procurement guidelines including palletization rules, with the unit of issue as a single piece and no variance permitted in quantity. The delivery must be FOB origin and inspected and accepted at the destination. The shipment must be sent via traceable freight methods, excluding parcel post, to the specified freight address in Ronkonkoma, New York, with a required delivery date of July 30, 2026. The item is part of a full and open competition under solicitation SPE7M0-26-T-025R, with technical specifications referenced from a drawing revision dated June 12, 2026, and governed by DoD unit of issue standards. Government-only identifiers are included for tracking and logistics control, and the item is designated for FMS distribution.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 326122
New
DIBBS
REDUCER, BEAD
Solicitation # SPE7M3-26-T-7805
This contract is for the procurement of one unit of a REDUCER, BEAD with NSN 4730-01-664-8190 under solicitation SPE7M3-26-T-7805, issued by the Department of Defense’s Fluid Handling Division. The item must be delivered within 348 days to the DLA Distribution facility in New Cumberland, Pennsylvania, FOB origin, with no tolerance for quantity variance. Inspection and acceptance occur at the destination, and packaging must comply with ASTM D3951 while strictly adhering to DLA’s Master List of Technical and Quality Requirements, which override any conflicting standards. All packaging and labeling must follow MIL-STD-129, and palletization must meet DLA’s specific packaging guidelines. The product must be free of mercury and mercury-containing compounds except for approved functional uses in batteries, fluorescent lights, sensors, weapon systems, or specified chemical reagents, with portable mercury-containing devices requiring shock-proof design and secondary containment per NAVSEA 5100-003D. Class I ozone-depleting chemicals are entirely prohibited, and any substitutions require prior approval. The unit of issue is each (EA), and the contractual price is set at $1.00 per unit. The required delivery date is July 28, 2027, with the original response deadline for the solicitation having passed on August 13, 2026. Technical and quality requirements referenced are governed by the DLA Master List version in effect at the time of solicitation issuance.
FLUID HANDLING DIVISION

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 326122
New
DIBBS
BUSHING, PIPE
Solicitation # SPE7M0-26-Q-1140
The contract specifies the procurement of a 3/4 inch NPT male threaded pipe bushing made from Schedule 80 PVC with a 1/4 inch NPT female threaded end and hex wrenching, classified as a commercial off-the-shelf item. It is identified by NSN 4730-01-007-2917 with a quantity of ten units, priced at a firm fixed price with no variance allowed in quantity. All items must comply with the DLA Master List of Technical and Quality Requirements, which supersede ASTM D3951 packaging standards, and must be marked and labeled per MIL-STD-129. Packaging must follow DLA Packaging Requirements for Procurement, including palletization per RP001, and delivery is required at origin FOB within 30 days after award. The unit of issue is each, and the item must be shipped to the designated destination at Yokosuka Naval Base, Japan, with transportation governed by DLA procedural notes C19 and C20. Approved manufacturers include Nibco Inc Chemtrol Division, Cleveland Service Center, George Fischer Sloane Inc, and Lasco Industries, each with specified part numbers. The contract is issued under solicitation SPE7M0-26-Q-1140 with a response deadline in September 2026 and a required delivery date no later than July 8, 2026.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 3 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 326122
New
DIBBS
TUBE, METALLIC
Solicitation # SPE7M4-26-T-297L
This contract specifies the procurement of a single metallic tube with NSN 4710-01-653-9621 and part number 5284449, supplied by Cummins Inc. or Birdon Pty Ltd, designated as a critical application item. The item must comply with all technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, and the use of Class I ozone-depleting chemicals is strictly prohibited, overriding any conflicting specification language unless alternative chemicals are pre-approved. Delivery is required within 20 days to the DLA Distribution Jacksonville Material Processing Center at Mayport Naval Station, Florida, with FOB origin terms and zero tolerance for quantity variance. Inspection and acceptance occur at the destination, and packaging must conform to MIL-STD-2073-1E and MIL-STD-129 with no special marking required. The item must be shipped via the fastest traceable means, explicitly excluding parcel post. The contract is issued under solicitation SPE7M4-26-T-297L with a required delivery date of March 6, 2026, and is governed by DLA’s authorized unit of issue and procurement protocols. Government use identifiers are controlled, and removal of government markings from non-accepted supplies is mandatory. All logistics and handling instructions, including palletization and marking, are strictly defined to ensure compliance with DLA packaging and distribution standards.
FLUID HANDLING DIVISION

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 326122
New
DIBBS
CLAMP, HOSE
Solicitation # SPE7M3-26-T-7795
This contract is for the procurement of eight hose clamps identified by NSN 4730-01-612-0052 and part number 54235K55 from McMaster-Carr Supply Co, with a unit price of $8.00, totaling $64.00. The items must be delivered within 20 days FOB origin, with no quantity variance permitted, and are subject to inspection and acceptance at the destination. Strict compliance is required with the DLA Master List of Technical and Quality Requirements, which override all other specifications including ASTM D3951. Packaging must adhere to MIL-STD-129 and RP001 guidelines, with palletization following DLA procurement standards, and all items must be marked and labeled accordingly. The use of any Class I ozone-depleting chemicals is strictly prohibited, and any substitute materials require prior approval unless explicitly authorized by the specifications. Shipping must be traceable and cannot utilize parcel post. Delivery is directed to Fort Polk, Louisiana, with the freight and mark-for addresses identical, and the contract includes a required delivery date of July 29, 2026. The solicitation number is SPE7M3-26-T-7795, with a response deadline of August 13, 2026, and it falls under NAICS code 326122. Government use identifiers and reporting codes are embedded for administrative tracking, and primary point of contact is William Cain of the Department of Defense’s Fluid Handling Division.
FLUID HANDLING DIVISION

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 326122
New
DIBBS
OUTLET, TUBE
Solicitation # SPE7L3-26-T-144R
The contract is for the procurement of five units of an outlet tube with NSN 4730-01-679-5463 and part number 087382, supplied by SAUER COMPRESSORS USA, INC. The requirement is issued under solicitation SPE7L3-26-T-144R with a firm fixed price and no tolerance for quantity variance—exactly five units must be delivered. Delivery is to be made FOB origin within 65 days of contract award, with an original required delivery date of November 29, 2025, and a need ship date of November 4, 2025. Inspection and acceptance both occur at the destination facility. Packaging must comply with MIL-STD-2073-1E, including preservation methods and unit container specifications, while marking must adhere to MIL-STD-129 with no special labeling required. Palletization follows DLA's RP001 packaging standards. The delivery address is the DLA Distribution facility at DDSP New Cumberland, Pennsylvania, which also serves as the freight shipping address. Transportation logistics are governed by DLAD Procurement Notes C19 and C20. The point of contact for inquiries is Amber Rohly, reachable via phone or email through the DLA procurement office.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 326122
New
DIBBS
GOVERNMENT FIRST ARTIC
Solicitation # SPE7MC-26-T-164M
The contract pertains to the procurement of a linear directional control valve with the NSN 0001S00000052, for a quantity of 23 units, under Purchase Request 7017710330QTY. Delivery is required within 722 days after delivery order issuance, and the solicitation number is SPE7MC-26-T-164M, issued by the Defense Logistics Agency through Depot Hill, with performance location at Hill AFB, Utah. The contracting activity falls under NAICS code 326122 and is classified as a federal procurement. The vendor must comply with all technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, and must adhere to DLA packaging standards and procedures for removal of government identification from non-accepted supplies. The item involves technical data subject to export control under either ITAR or EAR, and any disclosure or transfer to foreign persons or entities, including foreign nationals within the U.S., requires prior authorization from the Department of State or Commerce. Contractors must hold a valid US/Canada Joint Certification Program certification, have completed DLA’s required training on handling export-controlled technical data, and have been explicitly approved by DLA to access such data. The contract enforces DFARS 252.225-7048 and mandates CMMC Level 2 certification for any third-party assessment organization involved. The solicitation was posted on August 2, 2026, with a response deadline of August 13, 2026, and the primary point of contact is Paula Mcclary at fmda3302@dla.mil.
DEPOT HILL

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 326122
New
DIBBS
PIPE ASSEMBLY, METAL
Solicitation # SPE7M4-26-T-297D
The contract is for the procurement of three metal pipe assemblies with NSN 4710-01-648-5810 under solicitation SPE7M4-26-T-297D, with a delivery requirement of 202 days after order. The item is subject to strict cybersecurity requirements, including CMMC Level 2 certification for any third-party assessment organization involved, and the handling of covered defense information as defined by DLA policy. Technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, with compliance determined by the revision in effect on the solicitation or award date depending on acquisition size. Packaging must adhere to DLA standards, and any non-accepted supplies must have all government identification removed prior to return. The technical data associated with this item is export-controlled under either ITAR or EAR, requiring prior authorization from the Department of State or Commerce for any disclosure to foreign persons, including foreign nationals located in the U.S. or abroad, and DFARS 252.225-7048 applies. Access to the controlled data is restricted to contractors certified under the US/Canada Joint Certification Program, who have completed mandatory DOD export control training and received explicit approval from DLA. The place of performance is Tracy, California, and the contracting office is the Fluid Handling Division of the Department of Defense, with Rory O’Reilly designated as the primary point of contact.
FLUID HANDLING DIVISION

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 326122
New
DIBBS
REDUCER, TUBE
Solicitation # SPE7M4-26-T-296P
The contract is for 352 units of a REDUCER, TUBE with NSN 4730-01-646-4046 and part number DPL4011T0806, manufactured by DESIGNED METAL CONNECTIONS INC. The item is classified as a critical application item and must comply with all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, which take precedence over all other standards including ASTM D3951. Packaging and labeling must adhere to MIL-STD-129 and DLA Packaging Requirements for Procurement (RP001), with each unit packed according to the specified Quantity per Unit Pack (QUP) of 001. Delivery is required within 43 days of contract award, to be shipped FOB origin with no variance allowed in quantity. Inspection and acceptance occur at the destination point, specifically the DLA Distribution DDSP New Cumberland Facility in New Cumberland, PA. The required ship date is May 6, 2025, with the original delivery deadline set for June 4, 2025. Transportation procedures must follow DLAD Proc Notes C19 and C20. The contract is issued under solicitation SPE7M4-26-T-296P, with a unit price of $352.00 and total value of $123,904. The primary point of contact is Michel White, reachable via email and phone provided.
FLUID HANDLING DIVISION

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 326122
New
DIBBS
ELBOW, PIPE
Solicitation # SPE7M3-26-T-7796
The contract is for the procurement of seven ELBOW, PIPE units with NSN/Part Number 4730-01-718-7574 under solicitation SPE7M3-26-T-7796, issued by the Defense Logistics Agency’s Fluid Handling Division under the Department of Defense. Delivery is required within 187 days after contract award, with a response deadline of August 13, 2026, and the technical data associated with this item is subject to strict export controls under ITAR or EAR, prohibiting disclosure to foreign persons without prior authorization from the Department of State or Department of Commerce. Access to this controlled technical data is restricted to contractors authorized under the US/Canada Joint Certification Program, who have completed mandatory DOD export control training and approved the DLA questionnaire, with DFARS 252.225-7048 governing compliance. The solicitation is open to federal contractors, with the place of performance located in New Cumberland, Pennsylvania, and the primary point of contact is William Cain, reachable via email and phone provided.
FLUID HANDLING DIVISION

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 326122
New
DIBBS
STRAINER ELEMENT, SEDIM
Solicitation # SPE7M0-26-T-024Y
The contract is for the procurement of one Strainer Element, Sediment, identified by NSN 4730016585252, with a required delivery within five business days after award, by July 30, 2026, to the Distribution Management Office in Albany, Georgia. The item must be supplied in accordance with MIL-STD-129 for marking and labeling, including Data Matrix barcodes, and packaged in compliance with RP001 DLA Packaging Requirements for Procurement and ASTM D3951, although the DLA Master List of Technical and Quality Requirements supersedes ASTM D3951. No ozone-depleting chemicals are permitted, and any substitute chemicals require prior approval unless explicitly authorized by the specifications. The contract is a fixed-price, non-negotiable order with zero variance in quantity and inspection and acceptance occurring at the destination. The supplier must deliver via traceable freight means, prohibiting parcel post, with shipment addressed to the designated military facility. The contract falls under FAR clauses for equal opportunity, combating trafficking, employment eligibility, sustainable products, hazardous material identification, and defense-specific requirements including NIST SP 800-171 assessments and transportation by sea. Payment must be submitted electronically through Wide Area WorkFlow, and invoicing follows government-specific accounting codes tied to the contract award. The contractor must represent its small business status and comply with all socioeconomic and security-related representations, though actual filled-in data is not present. The supplier must also adhere to hazard communication standards, submit hazardous material labels for approval, and ensure all packaging includes correct unit of issue and quantity per unit pack as defined in the contract. The supply must be sourced from approved part numbers and cannot include hexavalent chromium or other prohibited substances under DFARS standards. No evaluation factors or contract options are detailed, and the award is based on automated processes with potential preference for small business categories, though the exact award method remains unspecified.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 326122
New
DIBBS
TEE, TUBE TO BOSS
Solicitation # SPE7M3-26-T-7799
The contract is for the procurement of eight units of a TEE, TUBE TO BOSS with NSN 4730-01-727-4294 and purchase request number 7017698062, issued under solicitation SPE7M3-26-T-7799 by the Department of Defense’s Fluid Handling Division. The item must be delivered FOB origin within 58 days of contract award, with no tolerance for quantity variance, and inspection and acceptance occur at the destination warehouse in Tracy, California. Packaging must strictly comply with MIL-STD-2073-1E, including preservative method 31, dry climate protection, unit container D3, intermediate container E5, and packaging code U, with marking following MIL-STD-129 and no special marking required. Palletization must align with DLA’s packaging requirements. The contract references the DLA Master List of Technical and Quality Requirements for applicable R and I numbers, and the applicable revision is determined by the solicitation issue date. The delivery address is the DLA Distribution San Joaquin warehouse, and the required ship date is October 11, 2026. The unit price is $8.00, totaling $64.00. Contact for inquiries is William Cain at William.Cain2@dla.mil or 614-692-5347.
FLUID HANDLING DIVISION

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details

More opportunities from Department Of Defense → FLUID HANDLING DIVISION

Same awarding agency

NAICS: 335312
New
DIBBS
STARTER, MOTOR
Solicitation # SPE7M4-26-T-296S
This contract specifies the procurement of a starter motor identified by NSN 6110017187462 and part number S801V50N3S from Eaton Corporation, with a quantity of three units to be delivered FOB origin within 126 days, with no tolerance for variance in quantity. The item is designated as a critical application item, and strict compliance with DLA’s Master List of Technical and Quality Requirements is required, which overrides all other specifications including ASTM D3951 for packaging. Packaging must adhere to MIL-STD-129 for marking and labeling, and palletization must follow DLA’s RP001 packaging requirements. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute chemicals must be approved unless explicitly authorized by the specification. Delivery is to be made to the designated receiving warehouse in Tracy, California, with inspection and acceptance occurring at the destination. The contract enforces DLA’s authorized unit of issue and references official DLA guidance for unit conversion. All technical and quality standards referenced take precedence over general standards, and the requirement for government identification removal from non-accepted supplies is in effect. The solicitation number is SPE7M4-26-T-296S, with a response deadline of August 13, 2026, and the item falls under NAICS code 335312 for motor vehicle electrical and electronic equipment manufacturing.
Motor and Generator Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333613
New
DIBBS
ACCUMULATOR, HYDRAUL
Solicitation # SPE7M4-26-T-296W
The contract is for the procurement of five hydraulic accumulators, part number 608712 and NSN 3040-00-957-3601, supplied by EATON AEROSPACE, LLC, with a total value of $25.00 at $5.00 per unit. The item is classified as a critical application item and must be delivered in strict compliance with DLA packaging requirements, specifically ASTM D3951, though all DLA Master List of Technical and Quality Requirements take precedence over this standard. Packaging and labeling must adhere to MIL-STD-129, and palletization must follow RP001 guidelines. The unit of issue is each, with no variance allowed in quantity—exactly five units must be delivered. Delivery is FOB origin with inspection and acceptance occurring at the destination, and delivery is required within 158 days of the contract award, with an original required delivery date of May 28, 2027, and a need ship date of January 19, 2027. The items must be shipped to the DLA Distribution Depot Hill at Hill AFB, Utah, with transportation handled according to DLAD Proc Note C19 for main shipment and C20 for first destination. Government identification must be removed from non-accepted supplies, and the solicitation number is SPE7M4-26-T-296W, issued under NAICS code 333613 by the Department of Defense’s Fluid Handling Division.
Mechanical Power Transmission Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332999
New
DIBBS
HOSE ASSEMBLY, NONMETAL
Solicitation # SPE7M4-26-T-297T
This contract specifies the procurement of a nonmetallic hose assembly with NSN 4720-01-494-5683 and part number 7-554-202801, issued by the Department of Defense through the Fluid Handling Division. Four units are required at a unit price of $4.00, totaling $16.00, with delivery due within 130 days to DLA Distribution Barstow, California, under FOB origin terms. The order carries a strict zero percent quantity variance, and inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E and DLA’s packaging requirements, including specific methods for preservation, wrapping, containerization, and marking in accordance with MIL-STD-129, with no special marking required. All technical and quality standards referenced are governed by the DLA Master List of Technical and Quality Requirements, with the revision effective on the solicitation issue date controlling. The contract is linked to solicitation SPE7M4-26-T-297T, which was posted on August 2, 2026, with responses due by August 13, 2026, and the NAICS code is 332999. The primary point of contact is Blake Tushar, reachable via phone and email. Transportation and shipping instructions follow DLAD procedural notes C19 and C20.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 326220
New
DIBBS
SLEEVE, REINFORCING,
Solicitation # SPE7M4-26-T-297N
This contract specifies the procurement of a reinforcing sleeve for hose applications under military specification, with strict adherence to technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements. The item is designated as a critical application requiring engineering source approval and is restricted to approved suppliers including Boeing, Eaton Aeroquip, Smiths Tubular Systems, and Parker Hannifin, all supplying the same part number BACH8A04EE0130B. Compliance with MIL-STD-130N for Item Unique Identification and DFARS 252.211-7003 is mandatory, alongside traceability documentation per DLA Procurement Note C03 (August 2016). The product must not contain any Class I ozone-depleting chemicals, and all packaging, preservation, and marking must conform to MIL-STD-2073-1E, MIL-STD-129, and DLA packaging standards. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and attributes are assigned verification levels based on criticality. Delivery is FOB origin, with a strict quantity of eight units, no variance allowed, arriving at the DLA distribution facility in New Cumberland, PA within 25 days of order, with a required ship date of September 8, 2026. All data and documentation must remain under government control, and the item is subject to covered defense information protocols under RD002.
Rubber and Plastics Hoses and Belting Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332999
New
DIBBS
HOSE ASSEMBLY, NONMETAL
Solicitation # SPE7M4-26-T-297A
The contract pertains to the procurement of four nonmetallic hose assemblies with part numbers F722J9J7121212-84 and F722TCJ9J1121212-84-000, supplied by Parker-Hannifin Corporation under NSN 4720-01-480-6648. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, with compliance determined by the revision in effect on the solicitation or award date depending on acquisition size. Item Unique Identification is not required per the Service customer’s request, and DFARS 252.211-7003(c)(1)(i) applies. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise specified, and unspecified attributes are treated as major. Verification levels and AQLs are defined for critical, major, and minor attributes, with the manufacturer permitted to choose attribute or variable inspection under MIL-STD-1916 unless restricted. Packaging must comply with ASTM D3951 and MIL-STD-129, with all labeling and marking adhering to DLA standards, and palletization according to RP001 requirements. The DLA Master List takes precedence over ASTM D3951. Delivery is FOB origin with a 137-day lead time, and inspection and acceptance occur at destination. The unit of issue is each, with a fixed quantity of four units and no variance permitted. The delivery address is DLA Distribution Albany in Albany, Georgia, with a required ship date of December 29, 2026. The solicitation, issued under SPE7M4-26-T-297A, was posted on August 2, 2026, with responses due by August 13, 2026, and is managed by the Department of Defense’s Fluid Handling Division, with Blake Tushar as the primary point of contact.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 326220
New
DIBBS
HOSE ASSEMBLY, NONME
Solicitation # SPE7M4-26-T-297P
This contract specifies the procurement of a nonmetallic hose assembly with part number 591200-51 and NSN 4720016541086, quantity of three units, to be delivered FOB origin within 39 days of contract award, with a required delivery date of May 2, 2026 and a need ship date of September 22, 2026. The item is classified as a critical application item with no shelf life requirement and must comply with extensive technical and quality standards referenced through DLA master lists, including preservation, packaging, and marking requirements per MIL-STD-2073-1E and MIL-STD-129. All units must be marked with the NSN, contract number, lot number, contractor and manufacturer CAGE codes, and part number, with special marking codes not applicable. Packaging must adhere to DLA packaging requirements and palletization standards, with each unit contained in a D3 unit package within an E5 intermediate container. The contract mandates compliance with stringent traceability and identification protocols, including retention of supply chain documentation per DLA Procurement Note C03, Item Unique Identification (IUID) following MIL-STD-130 and DFARS 252.211-7003, and FAA bare item marking requirements. Sampling and inspection are governed by MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and attributes are to be classified with verification levels or AQLs as dictated by applicable documents. Acceptance occurs at the destination, with no variance allowed in quantity. Shipping and delivery instructions direct all units to the DLA Distribution facility in New Cumberland, PA, and transportation logistics are governed by DLA Procurement Notes C19 and C20. The solicitation, issued under contract number SPE7M4-26-T-297P, is for a federal acquisition under NAICS code 326220 with Blake Tushar as the point of contact.
Rubber and Plastics Hoses and Belting Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336411
New
DIBBS
BODY, VALVE
Solicitation # SPE7M4-26-T-297W
The contract pertains to the procurement of a BODY, VALVE with a matched set SEAL RING, identified by NSN 4820-00-404-6625, for a quantity of five units under purchase request 7017695673. Delivery is required within 165 days from award, and the solicitation number is SPE7M4-26-T-297W, issued by the Department of Defense’s Fluid Handling Division. The technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions effective as of either the solicitation issue date or award date depending on the scale of the acquisition. Subcontractors must comply with DLA packaging requirements and are required to remove government identification from non-accepted supplies. No bidset is available from DLA, and the alternate offeror must submit a complete data package including specifications for both the approved and alternate parts. The prime contractor is Eaton Aerospace LLC dba Sterer Engineering, and the place of performance is New Cumberland, Pennsylvania, with Rory O’Reilly listed as the primary point of contact. The NAICS code is 336411, and the solicitation closes on August 13, 2026.
Aircraft Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 114119
New
DIBBS
CABINET, KEY
Solicitation # SPE7M4-26-T-296X
The contract pertains to the procurement of a cabinet key under NSN 2090-00-904-6699, with a quantity of 63 units, to be delivered FOB origin within 123 days by December 15, 2026. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which supersedes any conflicting standards such as ASTM D3951. Packaging must comply with MIL-STD-129 for marking and labeling, and palletization must adhere to DLA’s RP001 packaging requirements. The hinge must be provided with a fast-type pin, and piece number 22, the bulkhead clip, must be supplied in specified dimensions of 1 inch long by 3/4 inch wide by 1/8 inch thick, with part number HPC-511. The unit of issue is each (EA), with no variance allowed in quantity. Inspection and acceptance occur at the destination, and delivery must be made to the designated receiving warehouse in Tracy, California. Transportation procedures must follow DLAD Proc Notes C19 and C20. The solicitation number is SPE7M4-26-T-296X, issued by the Department of Defense’s Fluid Handling Division, with primary point of contact Rory O’Reilly.
Other Marine Fishing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332919
New
DIBBS
PLUG, PIPE
Solicitation # SPE7M3-26-T-7794
The contract specifies the procurement of one plug and pipe assembly with NSN 4730-01-549-7774 under solicitation SPE7M3-26-T-7794, requiring delivery within 20 days FOB origin with no variance in quantity. The item must be packaged in compliance with ASTM D3951, but all DLA Master List of Technical and Quality Requirements take precedence over this standard. Packaging and labeling must adhere to MIL-STD-129, and palletization must follow DLA’s RP001 packaging guidelines. The shipment must be sent via traceable freight methods, explicitly prohibiting parcel post, and directed to the designated military delivery address at Moody AFB, Georgia. The unit of issue is each, priced at $1.00, with inspection and acceptance occurring at the destination. The supplier is identified as GENERAC MOBILE PRODUCTS, LLC, and the required delivery date is July 29, 2026, with solicitation responses due by August 13, 2026. Government use identifiers and codes are included for internal logistics and tracking purposes.
Other Metal Valve and Pipe Fitting Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332996
New
DIBBS
PLUG, WATER INLET FI
Solicitation # SPE7M3-26-T-7801
The contract pertains to the procurement of eight units of a water inlet fitting, identified by NSN 4730-00-928-6499, under solicitation SPE7M3-26-T-7801, with a response deadline of August 13, 2026. Delivery is required within 307 days of award. The item is subject to stringent export control regulations under either ITAR or EAR, prohibiting any unauthorized disclosure or transfer of associated technical data to foreign persons, regardless of location, and mandating compliance with DFARS 252.225-7048. Only DLA contractors possessing valid US/Canada Joint Certification Program certification, who have completed mandatory training on handling export-controlled technical data and submitted the required DLA questionnaire, are authorized to access this information. The contract is administered by the Department of Defense’s Fluid Handling Division, with performance designated for Tracy, California, 95304-5000. The primary point of contact is William Cain, reachable via email and phone provided. The solicitation is classified under NAICS code 332996 and requires compliance with DLA packaging standards and CMMC Level 2 certification for third-party assessors.
Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334519
New
DIBBS
GAGE ROD-CAP, LIQUID
Solicitation # SPE7M4-26-T-297Y
The contract pertains to the procurement of 55 units of a GAGE ROD-CAP, LIQUID LEVEL with NSN 6680-01-299-3387 under solicitation SPE7M4-26-T-297Y, with a delivery requirement of 95 days after contract award. The item is designated as a source control item and is subject to stringent technical and quality requirements outlined in the DLA Master List of Technical and Quality Requirements, which must be complied with in full. Sampling procedures must follow MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based sampling plan, with attributes classified as critical, major, or minor assigned verification levels VII, IV, and II respectively or AQLs of 0.1, 1.0, and 4.0; unspecified attributes are treated as major. Zero non-conformances are required in the sample lot unless otherwise directed in the contract. The item is classified under NAICS 334519 and is governed by cybersecurity requirements mandating CMMC Level 2 certification for the third-party assessment organization involved. Export control regulations under ITAR or EAR apply to associated technical data, restricting disclosure to foreign persons anywhere, including U.S. subsidiaries and employees, and require compliance with DFARS 252.225-7048. Access to this data is limited to approved DLA contractors with JCP certification, completion of mandatory training on handling export-controlled technical data, and approval from the DLA controlling authority. Packaging must adhere to DLA packaging requirements, and government identification must be removed from non-accepted supplies. The solicitation was posted on August 2, 2026, with a response deadline of August 13, 2026, and performance is to occur in Corpus Christi, Texas.
Other Measuring and Controlling Device Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details