Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Terminal Cable

Active

Z4935State & Local

Response Deadline08/11/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract solicits a terminal cable component known as the Clamp Ground Riser TLS42 Tap Lug, designed for single cable applications with a bronze bolted terminal that connects cable to a flat surface. The terminal is engineered for cable ranges between 0.162 and 0.575 inches in diameter, and includes an eyebolt of sufficient length to accommodate clamping hardware up to 0.25 inches or 0.75 inches thick. The clamping hardware material is specified as stainless steel to ensure durability and resistance to corrosion, while the terminal itself is constructed from bronze for reliable conductivity and mechanical strength. The approved manufacturer and part number for this component is HUBBEL TLS42, with no alternatives permitted. This solicitation, issued by Nashville Electric Service under number Z4935, is targeted at state and local government entities and falls under the SLED category. The posting date is August 5, 2026, with a response deadline of August 11, 2026. The performance location is in Nashville, Tennessee, and all submissions must be made through the vendor portal linked in the contract data. Alan Martinez, the primary procurement contact, can be reached via email or phone for inquiries, and interested parties are directed to the official bidding website to access the full solicitation materials.

General Info

HUBBEL TLS42 bronze clamp ground riser lug for 0.162–0.575 in cables, stainless steel hardware, Nashville Electric Service solicitation Z4935.

Agency

Tennessee → Nashville Electric ServiceView Agency

NAICS

335931 - Current-Carrying Wiring Device ManufacturingView NAICS

Place of Performance

Nashville, TN, US

Set-Aside

NONE

Documents

(1)

RFB Z4935 Clamp Ground Riser TLS42

PDF•rfb

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation

PostedAug 5

Solicitation

Response DeadlineAug 11

Submission deadline

Response Deadline

08/11/2026, 07:00:00 PM UTCin 5 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyTennessee → Nashville Electric Service

Contacts1 person available

OfficeNashville, TN, US

Organization / Agency

Tennessee → Nashville Electric Service

View Agency Profile

Office AddressNashville, TN, US

Contacts

Alan MartinezProcurement Contact

contact@example.gov

+1 (555) 000-0000

Full Description

Show more

CLAMP GROUND RISER TLS42 TAP LUG, SINGLE CABLE BRONZE BOLTED TERMINAL CABLE TO FLAT 1/4" THICK, CABLE RANGE 0.162-0.575 EYEBOLT IS OF SUFFECIENT LENGTH TO BOLT THROUGH A MAXIMUM OF .25" OR .75" CLAMPING HARDWARE MATERIAL IS STAINLESS STEEL. Approved Manufacturers and/or Part Numbers: HUBBELTLS42

Similar Contracts

Same NAICS industry code

Supply of Cartridge Fuses (NSN: 5920016463582)

ACTIVE DEVICES DIVISION

POSTED

about 15 hours ago

DEADLINE

Special-Purpose Electrical Cable Assembly ManufacturingA single custom electrical cable assembly, identified by NSN 6150-01-496-5544 and part number 93006A9001-1, is to be manufactured and delivered in accordance with military drawing specifications and applicable technical standards. The work falls under NAICS code 335931, classifying it as the manufacture of other electrical equipment and components, and is issued as a subcontract by the ASC Commodities Division under the Department of Defense. The solicitation was posted on August 5, 2026, with a firm response deadline of August 20, 2026, and the contract will be managed through the DIBBS platform. Performance location and point of contact details are not specified, and no set-aside classification applies to this requirement.

ASC COMMODITIES DIVISION

POSTED

about 15 hours ago

DEADLINE

RETAINER, ELECTRICAL

Solicitation # SPE7M5-26-Q-0839

The contract pertains to the procurement of 13 electrical retainers with NSN 5935-01-466-5336 under solicitation SPE7M5-26-Q-0839, issued by the Defense Logistics Agency’s Active Devices Division. The delivery is required within 134 days after award, and responses must be submitted by August 19, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless amended. Specific requirements include the removal of government identification from non-accepted supplies, physical marking of bare items, and strict adherence to export control regulations under ITAR or EAR, which restrict the disclosure of technical data to foreign persons, regardless of location, and impose obligations on both U.S. and foreign-owned entities. Access to controlled technical data is restricted to contractors authorized by DLA who hold a valid US/Canada Joint Certification Program certification, have completed mandatory training on handling DOD export-controlled data, and have passed the DLA Export-Controlled Technical Data Questionnaire. The place of performance is designated as Anniston, Alabama, with Andrew Bracken listed as the primary point of contact.

ACTIVE DEVICES DIVISION

POSTED

about 15 hours ago

DEADLINE

CABLE ASSEMBLY, SPECIAL

Solicitation # SPE4A6-26-T-13WH

This contract is for the procurement of four special-purpose electrical cable assemblies identified by NSN 5995-01-687-2127, with a delivery deadline of 308 days after award. The specifications are governed by technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition type. Packaging must comply with DLA standards, and non-accepted supplies must have all government identification removed before disposal. Sampling follows MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based plan, with verification levels assigned as VII, IV, and II for critical, major, and minor attributes respectively, or corresponding AQLs of 0.1, 1.0, and 4.0; unspecified attributes are treated as major. For MIL-STD-1916, the manufacturer may choose attribute or variable inspection unless otherwise directed, and MIL-STD-105/ASQ Z1.4 may define sample size but with zero non-conformances required unless the contract states otherwise. Technical data associated with this item is subject to ITAR or EAR export controls, prohibiting unauthorized disclosure to foreign persons regardless of location, and DFARS 252.225-7048 applies. Only DLA contractors with approved US/Canada Joint Certification Program status, completed DOD export control training, and approved questionnaire responses may access the controlled data. The solicitation, issued under SPE4A6-26-T-13WH on August 5, 2026, with a response deadline of August 13, 2026, is managed by the Defense Logistics Agency’s ASC Commodities Division, with Kory Walker as the point of contact, and performance is designated for New Cumberland, Pennsylvania, under NAICS code 335931.

ASC COMMODITIES DIVISION

POSTED

about 15 hours ago

DEADLINE

CABLE ASSEMBLY, SPEC

Solicitation # SPE4A6-26-Q-1282

The contract is for a specialized electrical cable assembly identified by NSN 6150-01-326-0282, with a requirement for ten units to be delivered within 324 days of award. Technical and quality obligations are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the acquisition type and timing of solicitation amendments. Cybersecurity compliance mandates CMMC Level 2 certification through a certified third-party assessment organization, and packaging must adhere to DLA-specific standards. The item includes controlled technical data subject to ITAR or EAR regulations, restricting disclosure to foreign persons regardless of location and requiring compliance with DFARS 252.225-7048. Access to this data is limited to contractors with approved US/Canada Joint Certification Program status, verified completion of DOD export control training, and formal DLA authorization. Inspection and acceptance occur at origin, non-accepted items must have government identification removed, and physical marking of bare items is required. The solicitation, issued under SPE4A6-26-Q-1282, was posted on August 5, 2026, with responses due by August 20, 2026, and is managed by the Department of Defense’s ASC Commodities Division, with Marcita Robinson as the primary point of contact.

ASC COMMODITIES DIVISION

POSTED

about 15 hours ago

DEADLINE

Solicitation # SPE4A7-26-T-621W

This contract is for the procurement of 516 terminal lugs identified by NSN 5940-01-161-8010, with delivery required within nine days of award at Tinker Air Force Base, Oklahoma, under solicitation SPE4A7-26-T-621W. The item is classified as a critical application and must comply with MIL-T-7928G and SAE AS7928 standards, as well as be sourced exclusively from manufacturers accredited by the Performance Review Institute’s Qualified Manufacturers List or Qualified Products List, accessible via eauditnet.com. All supplies must adhere to strict zero-defect sampling requirements under MIL-STD-1916 or equivalent zero-based sampling plans, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively, and no non-conformances permitted unless explicitly allowed by the contract. Mercury and mercury-containing compounds are prohibited in the product or its contact surfaces except for specific exempted uses such as batteries, fluorescent lamps, sensors, weapon systems, or NAVSEA-specified reagents; portable devices containing mercury must be shockproof and include a secondary containment barrier consistent with NAVSEA 5100-003D. Packaging and marking must conform to MIL-STD-2073-1E and MIL-STD-129, with no special marking required, and preservation methods must exclude mercury in all packaging materials. The contract specifies a firm fixed price of $701,565.7351 for the full quantity, with zero variance allowed in delivery quantity, inspection and acceptance occurring at destination, and freight shipped FOB origin. The seller must also comply with all DLA packaging and documentation requirements, including source approval procedures and removal of government identification from non-accepted items.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 15 hours ago

DEADLINE

SPL ICE, CONDUCTOR

Solicitation # SPE7M2-26-T-6040

This contract pertains to the procurement of a conductor item identified by NSN 5940-01-135-7078 and part number M83519/1-4, supplied in units of HD with a total quantity of 443 units. The item is classified as a commercial item and is designated as a critical application item, subject to stringent quality and packaging standards. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers including RQ001, RQ009, and RQ011, which mandate tailored quality controls, inspection at origin, and removal of government identification from non-accepted items. Packaging must comply with MIL-STD-2073-1E and DLA packaging guidelines, with marking in accordance with MIL-STD-129, and palletization following RP001 requirements. Sampling and inspection protocols follow MIL-STD-1916 or ASQ H1331, with zero non-conformances required unless otherwise specified, and attributes are assigned verification levels VII, IV, and II for critical, major, and minor characteristics respectively. The delivery is FOB origin with no variation in quantity permitted and inspection and acceptance occurring at the manufacturer’s location. Delivery is required within 147 days from award, with a need ship date of January 12, 2027, and the final delivery destination is Robins AFB, Georgia. The item must be free of intentional mercury or mercury-containing compounds except in specified applications such as functional batteries, fluorescent lights, or instrument controls, and any portable mercury-containing devices must incorporate a secondary containment boundary per NAVSEA 5100-003D. The contract is part of a Department of Defense solicitation under SPE7M2-26-T-6040, issued by the Nuclear Reactor Program, with a response deadline of August 17, 2026.

NUCLEAR REACTOR PROGRAM

POSTED

about 15 hours ago

DEADLINE

CABLE ASSEMBLY, POWE

Solicitation # SPE4A6-26-T-12UK

The contract is for the procurement of eight cable assemblies, power, electrical, identified by NSN 5995-01-702-3934, under solicitation SPE4A6-26-T-12UK, issued by the Defense Logistics Agency’s ASC Commodities Division. Delivery is required within 170 days of award, and the solicitation opened on August 5, 2026, with a response deadline of August 13, 2026. The item is subject to stringent technical and quality requirements incorporated from the DLA Master List of Technical and Quality Requirements, including physical identification and bare item marking, packaging standards per DLA guidelines, and rules for removing government identification from non-accepted supplies. Inspection and acceptance must occur at the manufacturer’s origin, and sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances tolerated unless otherwise specified, with critical, major, and minor attributes assigned specific verification levels or AQLs. The technical data associated with this item is subject to export controls under ITAR or EAR, restricting access to authorized parties only—contractors must hold valid US/Canada Joint Certification Program certification, complete mandatory DOD export control training, and obtain DLA approval to handle the data. The place of performance is New Cumberland, Pennsylvania, and all technical and compliance obligations are enforced under applicable DFARS provisions including 252.225-7048.

ASC COMMODITIES DIVISION

POSTED

about 15 hours ago

DEADLINE

CABLE ASSEMBLY, SPEC

Solicitation # SPE4A6-26-T-13WV

The contract pertains to the procurement of 22 units of a cable assembly identified by NSN 5995-01-733-9607 under solicitation SPE4A6-26-T-13WV, with a delivery deadline of 304 days after order. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless amended. Packaging must comply with DLA standards, non-accepted supplies must have government identification removed, and bare items must be physically marked as per RQ017. Sampling follows MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise specified; critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Export control restrictions apply to technical data governed by ITAR or EAR, prohibiting unauthorized disclosure to foreign persons regardless of location and requiring contractors to hold JCP certification, complete mandatory DOD export training, and receive DLA approval to access such data under DFARS 252.225-7048. The contracting activity is the ASC Commodities Division under the Department of Defense, with performance location in New Cumberland, PA, and primary point of contact is Victoria Burcham.

ASC COMMODITIES DIVISION

POSTED

about 15 hours ago

DEADLINE

CABLE ASSEMBLY, SPEC

Solicitation # SPE4A6-26-T-12SN

The contract is for a cable assembly identified by NSN 5995-01-660-3439 and part number WHS-01554, with a quantity of three units, to be delivered under solicitation SPE4A6-26-T-12SN. Delivery is required within 170 days from the award date, with a firm delivery date of January 31, 2027, and an original required delivery date of March 30, 2027. The items must be delivered FOB origin, with no tolerance for quantity variance, and inspected and accepted at the destination. Packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, including marking per MIL-STD-129 with no special marking codes, and palletization as specified. The material has no shelf life restriction but is designated as a critical application item and subject to cybersecurity maturity model certification (CMMC) Level 2 self-assessment requirements. The supplier must adhere to stringent quality assurance protocols, including zero-defect sampling under MIL-STD-1916 or comparable zero-based plans unless otherwise directed, with attributes classified as critical, major, or minor and assigned corresponding verification levels or AQLs. Technical and quality requirements referenced in this contract are sourced from the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation or award date depending on acquisition size. Documentation for source approval is required, and government identification must be removed from non-accepted supplies. The cable assembly is procured under the DoD authorized unit of issue, with pricing and logistics details aligned to the provided purchase request and delivery address at the DLA Distribution facility in New Cumberland, Pennsylvania. Transportation is governed by specific DLA procedural notes, and all work must be performed by a certified supplier, Crystal Group, Inc., with full compliance expected across cybersecurity, packaging, marking, and inspection standards. The solicitation was posted on August 5, 2026, with responses due by August 13, 2026, under a federal acquisition framework with NAICS code 335931.

ASC COMMODITIES DIVISION

POSTED

about 15 hours ago

DEADLINE

SWITCH, LEAD ASSEMBL

Solicitation # SPE7M8-26-T-5715

This contract pertains to the procurement of 10 units of SWITCH, LEAD ASSEMBL with NSN/Part Number 5930-01-157-1309 under solicitation SPE7M8-26-T-5715, with a required delivery within 229 days after order issuance. The supplier must be a Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization and comply with all technical and quality specifications referenced in the DLA Master List of Technical and Quality Requirements. The item is subject to strict export controls under ITAR or EAR, meaning any disclosure of associated technical data to foreign persons, including foreign nationals within the United States, requires prior government authorization. Access to such data is restricted to contractors with an approved US/Canada Joint Certification Program status, completion of DLA-specific training, and formal approval from the DLA controlling authority. The contract prohibits the use of Class I ozone-depleting chemicals in any component or process, overriding any conflicting specification but not altering product performance requirements. Configuration changes require formal engineering change proposals and variance requests, and all government identification must be removed from non-accepted supplies. The performance location is Anniston, Alabama, with a sole point of contact at the Department of Defense’s Electrical Devices Division.

ELECTRICAL DEVICES DIV

POSTED

about 15 hours ago

DEADLINE

INSULATION SLEEVING, EL

Solicitation # SPE4A6-26-T-13TP

The contract specifies the procurement of electrical insulation sleeving meeting the SAE AS23053/4 Revision A standard, with part number MS23053/4-101-8, under NSN 5970011145374. The product must be sourced exclusively from manufacturers listed on the Performance Review Institute’s Qualified Products List QPL-AS23053, ensuring compliance with accredited manufacturing and assembly standards. Sampling and quality verification follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated; attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. The item is exempt from Unique Identification requirements per DFARS 252.211-7003(c)(1)(i). Packaging and marking adhere strictly to MIL-STD-2073-1E and MIL-STD-129, with no special marking required, and palletization follows DLA packaging guidelines. Delivery is FOB origin with a 20-day lead time, quantity of 15 feet, and a 10% positive variance allowed. Inspection and acceptance occur at origin. The freight forwarder is DF Young Inc, with delivery directed to a military facility in Poprad, Slovakia. The contract was issued under solicitation SPE4A6-26-T-13TP with an original required delivery date of July 2, 2026, and is managed by the Department of Defense’s ASC Commodities Division.

ASC COMMODITIES DIVISION

POSTED

about 15 hours ago

DEADLINE

More opportunities from Tennessee → Nashville Electric Service

Same awarding agency

Solicitation # Z4934

Nashville Electric Service is soliciting air filters compatible with Ford Super Duty trucks from 2020 to 2023, specifically for F-250, F-350, F-450, F-550, and F-600 models, with approval limited to the Motorcraft A2031 part number. The solicitation, designated Z4934, was posted on August 5, 2026, and responses are due by August 11, 2026, at 7:00 PM Eastern Time. This procurement falls under a state, local, or education (SLED) agency classification and is managed by the Tennessee office of Nashville Electric Service, with performance required in Nashville, Tennessee. All bids must be submitted through the vendor portal linked in the solicitation, and inquiries should be directed to Alan Martinez, Procurement Contact, at amartinez@nespower.com or 615-747-3720.

Motor Vehicle Supplies and New Parts Merchant Wholesalers

POSTED

DEADLINE

Deadend Tee for Guying

Solicitation # Z4939

The contract specifies a hot-dip galvanized deadend tee designed for guying applications, featuring a flat base and a minimum ultimate strength of 35,000 pounds, manufactured in a forged shape for pole mounting. It requires three-quarters-inch bolts arranged on a six-inch center hole spacing, with the tee stem incorporating a minimum thirteen-sixteenths-inch chamfered hole to accommodate three-quarters-inch shank or Y-clevis ball hardware. A dedicated mounting location for a guy grip must be included to ensure proper installation and tensioning. Only approved manufacturers are eligible, with listed part numbers including MACLEAN UGA-77-7, GRIDPOW UGA78-6, and HUBBELLPSC2030527. The solicitation, identified as Z4939, is issued by Nashville Electric Service in Tennessee, with bids due by August 11, 2026, and open for response beginning August 5, 2026. The point of contact for procurement inquiries is Jay Thompson, reachable via email and phone provided in the contract data, and all performance and deliveries must be coordinated within Nashville, Tennessee.

Plate Work Manufacturing

POSTED

DEADLINE

Solicitation # Z4933

The contract calls for the supply of stainless steel key boxes measuring 4-1/2 inches by 4-1/2 inches by 1-1/2 inches, constructed from .060-inch thick stainless steel with welded and sanded corners for durability and a clean finish. Each box must include a 2-inch tab drilled with a 7/16-inch hole designed to accept a standard utilities padlock, ensuring secure access control. The lid is attached via a 4-inch-long stainless steel piano hinge that is spot-welded to the box for strength and reliability, while the rear panel features four 1/4-inch holes to facilitate mounting to a structure. Only approved manufacturers and part numbers are acceptable, with TRITONNES-KYBX specified as the designated source. This solicitation, identified by number Z4933, is issued by Nashville Electric Service under the Tennessee state agency and is open for responses until August 11, 2026, at 7:00 PM CT. The procurement is categorized under SLED—State, Local, and Education—and is intended for use within Nashville, Tennessee. Alan Martinez serves as the primary point of contact, reachable via email at amartinez@nespower.com or phone at 615-747-3720. Interested vendors must submit proposals through the official portal at the provided URL before the deadline to be considered for award.

Hardware Manufacturing

POSTED

DEADLINE

Solicitation # Z4938

The contract solicits Terminator 4 #1-4/0 25KV 3H conduit ventilating cable support units designed for use with 4-inch diameter galvanized conduit and compatible with three 1.25-inch diameter cables. The approved manufacturer and part number for compliance is PLMCV-40-3-1/CFOR1.25"DIACABLE, ensuring that submitted products meet technical specifications for ventilation and structural support in high-voltage cable installations. The solicitation is issued by Nashville Electric Service under the state of Tennessee, targeting local and regional suppliers capable of delivering certified equipment for critical utility infrastructure. The solicitation, identified by number Z4938, was posted on August 5, 2026, with a response deadline of August 12, 2026, at 7:00 PM Eastern Time. The procurement is classified under the SLED category, reflecting its alignment with state, local, or educational government entities. All deliverables must be performed in Nashville, Tennessee, and inquiries should be directed to Jay Thompson, the primary procurement contact, via phone at 615-747-3758 or email at jethompson@nespower.com. Interested parties can access detailed submission guidelines and forms through the official vendor portal linked in the contract data.

POSTED

DEADLINE

Solicitation # Z4937

Nashville Electric Service is seeking suppliers for four specialized hand tools under solicitation Z4937, with a response deadline of August 12, 2026. The requirements include 40 units of a wire stripper with blades sized for 10 to 22 gauge wire and a non-slip handle, approved models being IDEAL STRIPMASTER 45-092 and GREENLEE 1935. Additionally, six units of a 10-inch adjustable wrench with extra-wide jaw capacity and chrome finish are needed, with approved manufacturers including KLEIN, CRAFTSMAN, GREENLEE, PROTO, and CRESCENT. Eight twelve-point combination wrenches with a 15/16-inch opening and chrome or satin finish are also required, with approved items from ARMSTRONG and PROTO. Finally, four 3/8-inch hex bit sockets with a 3/8-inch drive and a 5 to 6-inch bit length must be supplied, approved under PROTO and ARMSTRONG models. All items are to be delivered with a unit of issue of EA, and the place of performance is Nashville, Tennessee. The procurement contact is Shanna Faulk, reachable via email and phone provided.

Hardware Merchant Wholesalers

POSTED

DEADLINE

Solicitation # Z4936

Nashville Electric Service is soliciting bids for a 14 oz. spray can carpet and upholstery cleaner, with approved manufacturer part numbers including NAPA3700, BLCORALDC23, WESTLEYDC23, and CHECKERECF-493935. The solicitation, numbered Z4936, was posted on August 5, 2026, and responses are due by August 11, 2026, at 7:00 PM Eastern Time. The requirement is intended for state, local, and educational government procurement under the SLED category, with performance expected in Nashville, Tennessee. Alan Martinez serves as the primary point of contact for procurement inquiries, reachable at 615-747-3720 or amartinez@nespower.com. The full solicitation details and submission instructions are available via the provided vendor portal link.

Carpet and Upholstery Cleaning Services

POSTED

DEADLINE

Solicitation # Z4932

The contract solicits a BCI GROUP 48 AGM automotive battery with a minimum of 760 cold cranking amps, specifically requiring the AC-DELCO model 88864541 as the approved part number. This is an absorbed glass mat battery designed for high-performance automotive applications and must meet the exact specifications outlined. The solicitation, identified by number Z4932, was posted on August 5, 2026, with responses due by August 11, 2026, at 7:00 PM. It is issued by Nashville Electric Service under the state of Tennessee, targeting state, local, and educational entities, and is not subject to any specific setaside classifications. All performance and delivery must occur in Nashville, Tennessee. Primary point of contact for procurement inquiries is Alan Martinez, reachable via email at amartinez@nespower.com, with additional details available through the vendor portal link provided.

Battery Manufacturing

POSTED

DEADLINE

Supply of 3/8" Drive Penta SocketsThe contract calls for the supply of 30 units of 3/8 inch square drive penta sockets, regular length, with specifications requiring them to be equivalent to either the SNAP ON B2190 or WILLIAMS BB-526 models. The solicitation is structured as a subcontract under NAICS code 332211, indicating it falls within the tool and die manufacturing sector. The posting date is listed as August 4, 2026, with a response deadline of August 11, 2026, at 7:00 PM. The place of performance is clearly identified as Nashville, though the state and zip code are not specified. The contracting organization is Nashville Electric Service, operating under the Tennessee entity. There is no designated set-aside type, and no point of contact information is provided within the data. Interested parties must submit responses via the vendor portal at the provided web link.

Cutlery and Flatware (except Precious) Manufacturing

POSTED

DEADLINE

Supply of 1/2" Drive Penta SocketsThe contract requires the supply of 30 units of 1/2-inch square drive penta sockets with regular length, all of which must comply with SNAP ON B2191 specifications. This is a subcontract opportunity issued by Nashville Electric Service under the NAICS code 332211, which corresponds to die, die stamping, and metal stamping manufacturing. The solicitation was posted on August 4, 2026, with a response deadline of August 11, 2026, at 7:00 PM. Performance of the contract is expected to take place in Nashville, with no specific state or zip code provided. The offering is accessible via a vendor portal at the provided URL, and while the type of set-aside is not specified, the contracting entity is a public utility organization based in Tennessee. No point of contact is listed within the provided data.

Cutlery and Flatware (except Precious) Manufacturing

POSTED

DEADLINE

Specialized Packaging and Marking ServicesNashville Electric Service is seeking specialized packaging and labeling services for high-value electrical connectors used in utility infrastructure, with requirements focused on secure transport and full logistics traceability. The contract encompasses custom kitting, protective packaging, and precise marking to ensure component integrity and compliance with operational standards throughout the supply chain. Bidders must demonstrate capability to handle sensitive electrical components with strict quality controls and end-to-end visibility protocols. The solicitation is classified as a subcontract under NAICS code 561910 for other support services and is open for responses until August 7, 2026, at 7:00 PM Eastern Time, with the opportunity posted on August 4, 2026. Performance is expected to be carried out in Nashville, Tennessee, and interested parties must submit proposals through the vendor portal at the provided URL. There is no set-aside type indicated, and all qualified subcontractors are eligible to respond.

Packaging and Labeling Services

POSTED

DEADLINE

Technical Equivalency Testing and Certification SupportNashville Electric Service is seeking third-party support to conduct technical testing, validation, and documentation for non-listed high-temperature connector products to establish equivalency claims against recognized standards. The scope includes comprehensive thermal and mechanical performance evaluations to demonstrate that these connectors meet or exceed the required safety and operational benchmarks under extreme conditions. The work must result in detailed, defensible documentation suitable for certification or regulatory review, ensuring the products can be deemed functionally equivalent to listed alternatives without compromising reliability or compliance. This subcontract opportunity requires submission of technical proposals by the deadline, with the performance location tied to Nashville, Tennessee, and the work governed under the NAICS code for professional, scientific, and technical services.

Testing Laboratories and Services

POSTED

DEADLINE

Supply of High-Temperature Compression Deadend ConnectorsNashville Electric Service is seeking qualified suppliers to manufacture and deliver 24 high-temperature compression deadend connectors specifically designed for use with ACSS conductors in NERC-regulated transmission systems. These connectors must be rated for continuous operation at 250°C to ensure reliable performance under demanding thermal conditions inherent in modern high-capacity power transmission networks. The contract is issued as a subcontract under NAICS code 335931, indicating a focus on electrical equipment manufacturing, and all work is expected to be performed with Nashville, Tennessee as the designated place of performance. Interested vendors must submit responses by the deadline of August 7, 2026, at 7:00 PM Eastern Time, following the procurement process outlined through the official vendor portal at the provided URL. While the solicitation number is not specified, the procurement is structured to meet strict technical and operational standards required for critical infrastructure applications.

Current-Carrying Wiring Device Manufacturing

POSTED

DEADLINE