This Solicitation opportunity from Department Of Defense was posted on April 22, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.
TEST KIT, REVERSE BL
Contract Overview
Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.
Active Opportunities Like This One
AI Contract Overview
The contract is for a reverse blood grouping test kit consisting of two 10 mL dropper-top bottles—one containing Group A1 cells and the other Group B cells—intended to confirm forward blood group testing results. The unit of issue is a set, with a total quantity of two sets required. The product is regulated by the FDA and must be stored refrigerated between 2 and 8 degrees Celsius with no freezing permitted, and carries a non-extendable shelf life of one month. Packaging and labeling must strictly comply with Medical Marking Standard No. 1, MIL-STD-129, and DLA packaging requirements, with commercial packaging in accordance with ASTM D3951 if not classified as hazardous under FED-STD-313. Each unit must be sealed and protected against damage, packed in suitable shipping containers to ensure safe delivery at the lowest freight rate, and delivered FOB destination within five days of order placement with zero variance allowed in quantity. Shipping must occur via the fastest traceable means, excluding parcel post, to the specified Military Medical Logistics Command address in Williamsburg, VA. The bid must include the supplier’s source and part number, with Ortho Diagnostic Systems Inc. identified as the manufacturer with part number 719210. All technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements effective on the solicitation date. The solicitation was issued on April 22, 2026, with responses due by April 28, 2026, and the required delivery date is April 24, 2026.
General Info
Agency
Contract Value
$260NAICS
Place of Performance
CHEATHAM ANNEX, WILLIAMSBURG, VA, 23185-5830, USASet-Aside
Awardee
Award Issued Date
Documents
(1)AI Contract Breakdown
Uniform Contract FormatWhat is UCF?
Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.
Timeline
Submission Closed
Organization & Contact Information
Full Description
TEST KIT, REVERSE BLOOD GROUPING, AFFIRMAGEN<(>,<)>
CONSISTS OF ONE 10 ML DROPPER TOP BOTTLE OF
GROUP A1 CELLS, AND ONE 10 ML DROPPER TOP
BOTTLE OF GROUP B CELLS, TO CONFIRM
FORWARD GROUP TESTING
.
UNIT OF ISSUE SET, SE
.
RS003: Shelf-life requirement RS001 for a Type I (Code A) item with a shelf-life of 1 month (non-extendable) applies to this item. . REQUIRES REFRIGERATION BETWEEN 2 DEGREES
- 8 DEGREES C. DO NOT PERMIT TO FREEZE. . RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
.
BIDDER SHALL SPECIFY SOURCE AND
PART NUMBER BEING SUPPLIED.
.
This device or drug is regulated by the FDA. Note to Buyers: The contracting official shall send a referral in EBS to the product specialist for confirmation. Please include bidder name and bidder contact information, manufacturer name, manufacturer part number, and item description.
APPLICABLE TO ALL MEDICAL ACQUISITIONS:
PACKAGING AND PACKING SHALL BE COMMERCIAL AS SPECIFIED IN THE PROCUREMENT DOCUMENT.
EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED IN A SUITABLE SEALED UNIT CONTAINER CAPABLE OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR BREAKAGE.
UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT THE LOWEST RATE, TO POINT OF DELIVERY CALLED FOR IN THE CONTRACT OR ORDER.
MATERIAL MUST BE MARKED IAW MEDICAL MARKING STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES
SPE2DS-26-T-004D
SECTION B
TO MIL-STD-129.
COPIES OF MEDICAL MARKING STANDARD NO. 1
(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA
TROOP SUPPORT VIA EMAIL TO fssb@dla.mil. MMS NO. 1 IS ALSO AVAILABLE ONLINE AT: https://www.dla.mil/Logistics-Operations/Packaging/
ORTHO DIAGNOSTIC SYSTEMS INC 61829 P/N 719210
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7016449775 0001 SE 2.000
NSN/MATERIAL:6550012045367
DELIVERY (IN DAYS):0005
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,
PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.
IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH
FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE
WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
N68610
NAVAL MED READINESS LOGISITICS CMD
564 SANDA AVENUE
CHEATHAM ANNEX
WILLIAMSBURG VA 23185-5830
US
SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
SPE2DS-26-T-004D
SECTION B
PR: 7016449775 PRLI: 0001 CONT’D
N68610
NAVAL MED READINESS LOGISITICS CMD
565 ANTRIM RD BLDG 565
CHEATHAM ANNEX
WILLIAMSBURG VA 23185-5830
US
M/F: (TCN) N6861061114200
RDD:
PROJ: 9GJ TP 1
SUPP ADD: PBLK03 SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 02
DIC: A4A DIST: 9L ADV: 2A FC: TW
Need Ship Date:00/00/0000 Original Required Delivery Date:04/24/2026
SPE2DS-26-T-004D NSN/Part Number: 6550-01-204-5367 Quantity: 2 SE Purchase Request: 7016449775QTY: 2 Delivery: 5 days ADO
More opportunities from Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF
Same awarding agency
Find Active Opportunities Like This
Get AI-powered intelligence on the opportunities still open
Every page of the solicitation package shredded into a compliance breakdown
AI-powered matching based on your capabilities and past performance
Competitor and incumbent history on the requirement
Automated alerts on amendments, Q&A deadlines, and award
Join 650+ contractors already using CLEATUS
