This Government Contract opportunity from New Jersey was posted on July 6, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Testing and Inspection Services

Closed

State & Local

Submission Closed07/30/2026, 06:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 541340

New

SLED

Specialty Telecom Engineering and Design Review (Subconsultant)This subcontract opportunity with the California Public Works Department of Engineering focuses on providing specialized engineering and design review services for complex telecommunications projects. The scope of work includes structural analysis for pole attachments, fiber routing, and RF compliance, with a specific requirement for deliverables to be PE-stamped. The solicitation was posted on August 24, 2026, and requires responses by September 14, 2026. Classified under NAICS code 541340, this engagement is designed for a subconsultant capable of delivering high-level technical oversight and engineering certification for telecom infrastructure.

Public Works Department, Engineering

POSTED

DEADLINE

Material Sampling and Testing ServicesThe City of Shoreline in Washington is seeking a subcontractor for Material Sampling and Testing Services. The primary objective of this contract is to collect and coordinate the testing of construction materials, specifically pavement, concrete, and asphalt, to ensure all materials comply with established project specifications. This opportunity falls under NAICS code 541340 and was posted on August 24, 2026. Interested parties must submit their responses by the deadline of September 22, 2026. Further details and application processes can be accessed through the Public Purchase portal.

POSTED

DEADLINE

Electrical Testing and Reporting ServicesThe American Consulate Jeddah, under the Department of State, is seeking a subcontractor to provide electrical testing and reporting services in Jeddah. The primary scope of work involves conducting electrical integrity testing, such as winding resistance measurements using a Megger, to ensure system reliability. The selected provider must document all test results and submit formal reports to the Contracting Officer’s Representative. Interested parties must respond by September 15, 2026, under NAICS code 541340.

American Consulate Jeddah

POSTED

DEADLINE

Independent Marine Surveyor (IMS) ServicesThis subcontract opportunity is for the provision of an Independent Marine Surveyor to certify the seaworthiness and proper rigging of a tug and the USNS CATAWBA. The selected provider must ensure compliance with the U.S. Navy Towing Manual, specifically performing the Appendix H inspection and issuing the necessary towing certificates. Managed by the Department of Defense through Mschq Norfolk, this requirement is designated as a total Small Business Set Aside under NAICS code 541340. Interested parties must submit their responses by August 28, 2026.

POSTED

DEADLINE

Vehicle Systems Testing and Final InspectionThe Vehicle Systems Testing and Final Inspection subcontract, issued by the Department of Defense under agency FA9301 Aftc Pzio, focuses on the post-installation testing of a water tender. The scope of work includes verifying structural load capacity, plumbing pressure, and overall operational performance to ensure the vehicle meets all technical specifications. The process concludes with the delivery of documented results and a final acceptance sign-off. This opportunity is designated as a Total Small Business Set Aside under NAICS code 541340. Performance will take place in Edwards, California. Interested parties must submit their responses by the deadline of September 8, 2026.

POSTED

DEADLINE

Quality Assurance, Inspection, and CertificationThis subcontract for Quality Assurance, Inspection, and Certification is issued by the Department of Defense under the Navsup Weapon Systems Support Mech agency. The primary objective of the contract is to ensure rigorous quality control through inspections conducted in accordance with ANSI/ASQ-Z1.4 standards, the verification of necessary certifications, and the submission of required Contract Data Requirements Lists. Additionally, the selected provider must support Government Source Inspection processes to maintain compliance and quality standards. The opportunity is categorized under NAICS code 541340 and was posted on August 24, 2026. Interested parties must submit their responses by the deadline of September 21, 2026, at 8:30 PM. This engagement focuses on technical quality oversight and certification management to support defense procurement and operational readiness.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Inspection, Test, and Quality Assurance (QA) ServicesThis subcontract for Inspection, Test, and Quality Assurance services is issued by the Department of Defense through Navsup Weapon Systems Support. The primary scope of work involves performing origin and destination inspections, as well as dimensional and functional testing, to ensure the quality acceptance of repaired actuators in accordance with the Technical Data Package. The contractor is responsible for managing nonconforming materials utilizing established IRB and MRB processes. Interested parties must submit their responses by September 21, 2026, under NAICS code 541340.

Navsup Weapon Systems Support

POSTED

DEADLINE

MACH1_AOI_Military Working Dog Kennels at JBSA-LOE1_Amend 1

Solicitation # FA8903-26-OT002

The 772nd Enterprise Sourcing Squadron, in coordination with the Air Force Civil Engineer Center, is seeking an innovative commercial partner under the Modernized Agile Construction Horizons (MACH1) Umbrella Program to design and construct NextGen Military Working Dog kennels. The project is divided into two lines of effort: Line of Effort 1 focuses on design and planning to create a mature, site-specific design package, while Line of Effort 2 covers the physical construction. The objective is to house and train 850 dogs across two locations, Joint Base San Antonio Lackland West and the Chapman Training Annex. While the original requirement mandated Engineered Tensile Fabric Structures, Amendment 1 updated the solicitation to remove this as a mandatory material, allowing for non-traditional construction methods. Any resulting agreement will be an Other Transaction Agreement executed under 10 U.S.C. section 2808a. The design must comply with the Animal Welfare Act, Department of the Air Force policies, DoD Unified Facilities Criteria, and Anti-Terrorism Force Protection standards. Key technical requirements include HVAC systems achieving 15 air changes per hour, acoustic dampening, and non-porous sanitation materials. The government will evaluate Phase 1 Solution Briefs based on technical merit, speed to design completion, and company experience. The response deadline for the presolicitation is September 11, 2026.

POSTED

DEADLINE

Structural Engineering for Multifamily BuildingThis subcontract involves providing structural engineering services for a seven-story multifamily residential building located in San Jose, California. The project scope requires the design of a 264-unit complex, with a specific focus on the foundation, framing, and ensuring full seismic compliance. The contract is issued under NAICS code 541340 and is associated with the City of San Jose. Performance of the work will take place in the 95128 zip code area, and further project details can be accessed through the provided CEQA Net link.

POSTED

DEADLINE

Professional Design Services – San José Community EV Charging Access Project

Solicitation # RFP-2026-DOT-003-PPD

The City of San José is seeking qualified vendors to provide professional design services for the San José Community EV Charging Access Project under solicitation RFP-2026-DOT-003-PPD. The project focuses on expanding electric vehicle charging infrastructure within the city. Interested parties must submit their responses electronically through the Biddingo platform by the deadline of September 21, 2026, at 4:00 PM PT. The contract will be awarded based on a best value evaluation rather than price alone. While the city has provided estimated quantities for the services required, these figures are not guaranteed and will not justify adjustments in unit pricing or rates. All necessary documentation and forms must be included in the online submission to be considered for the award.

City of San José - Consulting

POSTED

DEADLINE

Transportation Planning & Urban Design AnalysisThe City of Walnut in California is seeking a subcontractor for a Transportation Planning and Urban Design Analysis project. The primary objective of this contract is to conduct a detailed analysis of non-motorized transportation needs to ensure alignment with city planning goals. This scope of work specifically includes evaluating sidewalk connectivity, pedestrian crossings, trail systems, bicycle facilities, and overall ADA compliance. Interested parties must submit their responses by the deadline of September 24, 2026. The project falls under NAICS code 541340 and will be performed within the city of Walnut, California.

POSTED

DEADLINE

CAD Drafting and Modeling SupportThe City of Oroville Public Works Department in California is seeking a subcontractor to provide CAD drafting and modeling support under NAICS code 541340. The primary objective of this contract is to deliver professional drafting support using AutoCAD Civil 3D v2022 to produce civil design deliverables for 30 percent, 60 percent, and 90 percent submittals. The project will be performed in Oroville, California. Interested parties must submit their responses by the deadline of September 10, 2026.

City of Oroville Public Works Department

POSTED

1 day ago

DEADLINE

in 16 days

AI Contract Overview

The contract seeks independent testing and inspection services for concrete reinforcement, welding, and quality control activities, requiring formal reporting to ensure compliance with established standards. The work is classified under NAICS code 541340 and is structured as a subcontract, indicating it supports a larger project managed by the New Jersey agency under Capital Programs, Project Management & Engineering. The solicitation was posted on July 6, 2026, with a firm deadline for responses on July 30, 2026, at 6:00 PM Eastern Time. While specific location details are not provided, the place of performance is anticipated to be within New Jersey, and bidders must be prepared to deliver comprehensive, documented inspection results meeting defined technical and procedural requirements.

General Info

Independent testing and inspection for concrete and welding in New Jersey, due July 30, 2026.

Agency

New Jersey → Capital Programs, Project Management & EngineeringView Agency

NAICS

541340 - Drafting ServicesView NAICS

Place of Performance

NJ, USA

Set-Aside

NONE

Documents

This scope was carved out of City Contract #26-22.

The full solicitation package (3 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Construction of the 34th Street Sandcastle Park Operations Building

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseClosed

PostedJul 6

subcontract

Response DeadlineJul 30

Deadline has passed

Submission Closed

07/30/2026, 06:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyNew Jersey → Capital Programs, Project Management & Engineering

ContactsNo contacts available

OfficeN/A

Organization / Agency

New Jersey → Capital Programs, Project Management & Engineering

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Independent testing and inspection of concrete reinforcement, welding, and quality control items with formal reporting.