Top

Testing, Inspection, and Qualification Services

Active

Federal

Response Deadline08/18/2026, 04:59:00 AM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

General Info

Agency

Department Of Defense → Ok DLA Aviation At Oklahoma CityView Agency

NAICS

541380 - Testing Laboratories and ServicesView NAICS

Place of Performance

OK, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 10

subcontract

Response DeadlineAug 18

Submission deadline

Response Deadline

08/18/2026, 04:59:00 AM UTCin 7 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

AgencyDepartment Of Defense → Ok DLA Aviation At Oklahoma City

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Ok DLA Aviation At Oklahoma City

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Independent testing, inspection, and qualification of the signal converter to ensure compliance with MQR-PSD-1 and military performance standards.

Similar Contracts

Same NAICS industry code

NAICS: 541380

New

Federal

Crude Oil Quality Testing and Analysis Services for the Strategic Petroleum Reserve Project Management Office (SPRPMO)The U.S. Department of Energy’s Office of Cybersecurity, Energy Security and Emergency Response is forecasting a future requirement for crude oil quality testing and analysis services to support the Strategic Petroleum Reserve Project Management Office. This effort is categorized under NAICS code 541380, indicating it pertains to scientific testing and analysis services, and is open to all small businesses without specific set-aside restrictions. The services will involve detailed laboratory analysis and quality assurance of crude oil samples to ensure compliance with reserve standards, supporting the integrity and operational readiness of the Strategic Petroleum Reserve. Contract performance will be conducted at locations determined by the agency, with no specific city or state identified in the forecast. The point of contact for small business inquiries includes Jennifer Passaro and Walter Yamben, both serving as Small Business Program Managers and reachable via DOE headquarters email. The forecast posting date is August 10, 2026, and while no solicitation number or formal solicitation has been released, interested vendors should prepare for a future competitive procurement process focused on technical capability, reliability, and compliance with federal testing protocols for petroleum products.

Office of Cybersecurity, Energy Security and Emergency Response

POSTED

DEADLINE

Geotechnical and Environmental Engineering, Testing, and Inspection ServicesThe contract is for geotechnical and environmental engineering, testing, and inspection services to be performed at NASA’s Jet Propulsion Laboratory in Pasadena, California, with a performance period ending on May 26, 2025. The work is procured under the NAICS code 541380, which falls under engineering services, and is categorized as a forecast entry on the procurement timeline with no option periods available. The contracting activity is managed by the National Aeronautics and Space Administration through its Jet Propulsion Laboratory office, and the place of performance is clearly established at the JPL facility with a ZIP code of 91109. There is no set aside designation specified, and no point of contact information is provided in the dataset, while the procurement opportunity is publicly listed for small business engagement through the JPL website.

NASA Jet Propulsion Laboratory

POSTED

DEADLINE

WESTERN AREA POWER ADMINISTRATION Indefinite Delivery Indefinite Quantity (IDIQ) FOR OIL SAMPLE ANALYSIS AND TESTING FOR HIGH VOLTAGE TRANSFORMERSThe Western Area Power Administration has issued a forecast for an Indefinite Delivery Indefinite Quantity contract aimed at securing services for oil sample analysis and testing of high voltage transformers. This requirement is intended to support the ongoing maintenance and operational integrity of the power transmission infrastructure under the Department of Energy’s Western Area Power Administration. The contract will be awarded under NAICS code 541380, which covers laboratory testing services, and is open to eligible vendors with expertise in transformer oil diagnostics, including chemical composition analysis, moisture content, dissolved gas analysis, and other critical diagnostic testing protocols. The acquisition is not subject to a specific set-aside category beyond being classified as other, and the place of performance is not yet defined, indicating potential nationwide service delivery. The contract will allow multiple awardees to compete for task orders as testing needs arise across various substations and transformer locations under Western Area Power Administration’s jurisdiction. Point of contact for inquiries is the Small Business Program Manager, with email addresses provided for prospective small businesses seeking participation. The forecast was published in July 2026 with a posting date of August 2026, signaling anticipated solicitation activity in the near future.

Western Area Power Administration

POSTED

DEADLINE

NMT-X SATSIM COA Opt 1The Navy is seeking an alternative to the End-of-Life SATSIM located in Largo, which was previously used to support production testing for the NMT-X program. With these systems no longer viable and in high demand across multiple development initiatives, the focus has shifted to identifying a replacement solution capable of conducting Quality Conformance Inspection - A (QCI-A) on every deliverable. The new system is not expected to fulfill all NMT-X requirements, such as First Article Inspection/Testing, but must reliably support the critical QCI-A function to ensure ongoing production quality. The procurement activity is being managed by Naval Information Warfare Systems, with the place of performance identified as San Diego, and the NAICS code associated with the effort is 541380. Point of contact for inquiries is Kenneth Nickel, Contracting Officer, with Adam Barker listed as the secondary point of contact. The forecast was posted on August 10, 2026, and the opportunity is being pursued under the title NMT-X SATSIM COA Opt 1.

Naval Information Warfare Systems

POSTED

DEADLINE

FMSV-Vibration/Ultrasound AnalysisThe Federal Bureau of Investigation is forecasting a contract opportunity titled FMSV-Vibration/Ultrasound Analysis under the NAICS code 541380, which pertains to other scientific and technical consulting services. This opportunity is designated as a Small Business Total Set-aside under SBA guidelines, meaning only small businesses are eligible to compete. The services will be performed in Clarksburg, West Virginia, and the contract is expected to support specialized vibration and ultrasound analysis work, likely related to forensic or investigative needs. The point of contact for technical inquiries is Logan Swiger, reachable at lswiger2@fbi.gov, while Marcia Denise Kirkpatrick serves as the Small Business Specialist and can be contacted at mdkirkpatrick@fbi.gov for matters related to small business participation. The forecast was posted on August 10, 2026, and additional information can be found through the DOJ’s contracting opportunities portal.

Federal Bureau Of Investigation

POSTED

DEADLINE

First Article Testing (FAT) ServicesThe contract requires the performance of first article testing on nonmetallic hose components to ensure full compliance with applicable military standards, including rigorous documentation of all test procedures and results. The work involves detailed verification of material properties, dimensional accuracy, pressure performance, and environmental resilience as mandated by defense specifications, with all findings reported in a format approved by the Government Quality Assurance Representative. Close coordination with the QAR is essential throughout the testing phase to ensure transparency, address any nonconformances promptly, and obtain formal acceptance prior to proceeding with production. This is a total small business set-aside subcontract under NAICS code 541380, intended exclusively for small businesses as defined by the SBA. The opportunity is managed by the Fluid Handling Division within the Department of Defense, with all work to be performed at a site in San Diego, California, specifically at the ZIP code 92136-3581. The solicitation was posted on August 10, 2026, and responses are due by August 21, 2026, with the contract to be awarded through the DIBBS platform. Failure to meet the technical requirements or timelines may result in disqualification, and all parties must adhere to federal acquisition guidelines for subcontractor performance and reporting.

FLUID HANDLING DIVISION

POSTED

DEADLINE

First Article Testing (FAT) and Certification ServicesThe contract is for independent testing and certification of an initial production unit to ensure compliance with Military Performance Specification MIL-PRF-32107/3, Quality Assurance Plan QAP 16236, and specific shelf-life marking requirements. The work involves verifying that the product meets all technical and regulatory standards through rigorous evaluation and documentation, with all test results and reports submitted in accordance with Federal Acquisition Regulation clauses. The deliverables centers on formal certification and submission of comprehensive test reports to confirm adherence to military and quality standards. This is a subcontract under the Department of Defense’s Fluid Handling Division, with a place of performance located in New Cumberland, Pennsylvania, 17070-5002. The solicitation, identified under NAICS code 541380, is open for responses through August 21, 2026, with proposals due by 5:00 PM Eastern Time. The contract is not set aside for any specific small business category, and all interested parties must submit their offers through the DIBBS portal using the provided link before the deadline.

FLUID HANDLING DIVISION

POSTED

DEADLINE

First Article Testing (FAT) Services for Production UnitsThe contract requires the performance of First Article Testing on three production units in accordance with FAR 52.209-3 before full production can be authorized, ensuring compliance with quality and specification standards prior to scale-up. This work is part of a subcontract under a Total Small Business Set-Aside classification, restricted to small businesses as defined by the SBA, with the NAICS code 541380 indicating engineering services. The testing must be conducted at the specified place of performance in New Cumberland, Pennsylvania, with a response deadline of August 21, 2026, and the solicitation was posted on August 10, 2026. The contracting activity is under the Department of Defense through the LAND SUPPLY CHAIN organization, and the task is managed through the DIBBS system with the reference number SPE7L126T949C.

POSTED

DEADLINE

Packaging and Labeling Compliance ServicesThe contract seeks subcontract services to ensure packaging, hazard labeling, and special marking requirements meet the stringent standards of MIL-STD-2073-1E and MIL-STD-129, with specific emphasis on Code 32 compliance. The work involves verifying that all military packaging and labeling protocols are accurately applied to meet Department of Defense operational and safety requirements, ensuring readiness and compliance across logistics and supply chain operations. The performance location is specified as Suffolk, Virginia, with a zip code of 23435-5000, indicating the physical or operational site where services will be executed. The contract, classified under NAICS code 541380, is issued by the Defense Logistics Agency under the Department of Defense and is categorized as a subcontract opportunity. It was posted on August 10, 2026, with a response deadline of August 21, 2026, providing a limited time window for potential subcontractors to submit proposals. The solicitation is accessible through the DIBBS platform, and while no set-aside provisions or point of contact details are provided, the focus remains on technical compliance with military packaging and labeling standards critical to defense supply chain integrity.

Defense Logistics Agency

POSTED

DEADLINE

First Article Testing (FAT) Services

POSTED

DEADLINE

First Article Testing ServicesThe contract seeks independent testing and validation of initial production samples to ensure full compliance with military and contractual technical specifications before transitioning to full-scale production. This effort is designated as a subcontract under NAICS code 541380 and is managed by the Active Devices Division within the Department of Defense, with performance required at New Cumberland, Pennsylvania, zip code 17070-5002. The solicitation was posted on August 10, 2026, and responses must be submitted by August 14, 2026, indicating a narrow two-day window for proposal submissions. The scope centers on verifying that first-article samples meet all specified performance, quality, and regulatory standards, serving as a critical gate before production authorization. No set-aside preferences or organizational type restrictions are indicated, and the point of contact information is not provided, suggesting proposers must rely on the linked DIBBS portal for further details.

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Quality Inspection and Testing Services

ASC COMMODITIES DIVISION

POSTED

about 8 hours ago

DEADLINE

in 8 days

View Details

More opportunities from Department Of Defense → Ok DLA Aviation At Oklahoma City

Same awarding agency

NAICS: 541611

New

Federal

Technical Data & Source Approval Package DevelopmentThe contract pertains to the development of a comprehensive Source Approval Request (SAR) package required for defense-related technical procurement, encompassing all necessary technical data rights, the completed DD Form 2345, detailed quality history documentation, and strict adherence to the requirements outlined in MQR-PSD-1 Revision 2. This effort is critical to establishing and validating the source of supply for components or systems used by the Department of Defense, ensuring traceability, compliance, and qualification of suppliers under military standards. The work must be executed with precision to meet federal contractual obligations and support uninterrupted supply chain operations. The contract is structured as a subcontract with a solicitation posted on August 10, 2026, and responses due by August 18, 2026, at 4:59 a.m. The NAICS code 541611 identifies the work as engineering services, indicating the need for specialized technical expertise in data management and quality assurance. The awarding entity is the Defense Logistics Agency Aviation located in Oklahoma City, and performance is expected to support its operations, though no specific location is provided. The nature of the work demands experienced contractors capable of navigating complex defense documentation standards and delivering a fully compliant SAR package that meets all regulatory and procedural benchmarks set forth by the Department of Defense.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

Packaging, Preservation & Military Shipping DocumentationThe contract seeks a subcontractor to develop and execute military-compliant packaging, preservation, labeling, and shipping documentation systems designed to maintain the integrity of equipment and materials during long-term storage and logistical transport. All activities must strictly adhere to military standards to ensure durability, environmental resistance, and traceability throughout the supply chain. The work involves not only physical packaging procedures but also the creation of accurate, compliant documentation to support military logistics requirements, including identification, handling, and storage instructions. The opportunity is posted under NAICS code 561910 and is issued by the Department of Defense through the Ok DLA Aviation office in Oklahoma City. It is classified as a subcontract with no specific set-aside designation and has a response deadline of August 18, 2026, at 4:59 AM. No point of contact or place of performance details are provided, and the solicitation number is not listed. Interested parties must review the full requirements via the provided SAM.gov link to understand the scope, compliance frameworks, and submission criteria in detail.

Packaging and Labeling Services

POSTED

DEADLINE

Quality Assurance & NADCAP-Certified ProcessesThis contract requires the certification and execution of significant industrial processes including calibration, nondestructive testing, and precision machining in full compliance with NADCAP, OEM, and Department of Defense standards. The work involves delivering high-precision manufacturing and inspection services that meet stringent aerospace and defense quality requirements, ensuring traceability, documentation, and process control aligned with accepted industry certifications. All activities must be performed by personnel and facilities holding current, valid certifications under the specified programs, with strict adherence to documented procedures and audit readiness. The contract is classified as a subcontract under NAICS code 541380, issued by the Department of Defense through DLA Aviation in Oklahoma City. The solicitation was posted on August 10, 2026, with a mandatory response deadline of August 18, 2026, at 4:59 AM Eastern Time. Performance is expected to occur at locations determined by the prime contractor or as otherwise specified, and all subcontractors must demonstrate proven capability in regulated industrial processes, with evidence of recent audits, accreditation, and compliance history. The award will be made to qualified entities capable of maintaining the highest levels of quality assurance and operational integrity in support of critical defense and aerospace systems.

Testing Laboratories and Services

POSTED

DEADLINE

Component Manufacturing & Sub-Tier Supply for Sensor ElementsThe contract pertains to the manufacturing and supply of critical internal components including sensing elements, resistors, and calibration parts essential for the integration into temperature indicators. All components must meet stringent traceability requirements and full compliance with applicable technical and quality standards to ensure reliability and performance in demanding operational environments. The work is structured as a subcontract, with the Department of Defense through the Ok DLA Aviation office in Oklahoma City seeking qualified suppliers capable of delivering high-precision parts with documented provenance and adherence to defense-grade specifications. The solicitation was posted on August 10, 2026, and responses are due by August 18, 2026, with the North American Industry Classification System code 334511 indicating the focus on manufacturing instrumentation and related components for industrial and military applications.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

DEADLINE

New Manufacture of Temperature Indicator (End Item Assembly)The contract involves the full-scale manufacture of a temperature indicator as a finished end item assembly, encompassing every phase from component sourcing and procurement through to final assembly, testing, inspection, packaging, and comprehensive documentation—all conforming to strict military standards. This is a subcontract opportunity requiring end-to-end production execution with adherence to defense-grade quality and compliance protocols, ensuring the delivered product meets rigorous operational and technical requirements for military use. The solicitation was posted on August 10, 2026, with a response deadline of August 18, 2026, and is managed under the NAICS code 334519 for other electronic component manufacturing, within the Department of Defense’s structure through the Ok DLA Aviation office in Oklahoma City. The place of performance is unspecified but must accommodate full production capabilities aligned with military logistics and delivery expectations. The contract type is explicitly a subcontract, indicating the prime contractor is seeking a capable supplier to fulfill a critical production requirement as part of a larger defense system or program.

Other Measuring and Controlling Device Manufacturing

POSTED

DEADLINE

Packaging, Shipping, and Logistics Management

Other Warehousing and Storage

POSTED

DEADLINE

Component and Subassembly Supply for Signal Converter

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

DEADLINE

Electronics Manufacturing of Signal Converter (Full Assembly)

Electromedical and Electrotherapeutic Apparatus Manufacturing

POSTED

DEADLINE

Raw Material and Component Supply

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

DEADLINE

Surge Production Capacity Support

Precision Turned Product Manufacturing

POSTED

DEADLINE

IUID Marking and Asset Tagging Services

Home and Garden Equipment Repair and Maintenance

POSTED

DEADLINE

Actuator Assembly and Integration

Aircraft Engine and Engine Parts Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 15 days

View Details