This Solicitation opportunity from Department Of Defense was posted on May 11, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.
TESTING KIT, WATER S
Contract Overview
Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.
Active Opportunities Like This One
AI Contract Overview
The contract is for a single handheld water salinity testing kit with a measurement range of 0 to 5000 ppm, identified by NSN 6630-01-417-9288 and part number 09D-0512T5-500, manufactured by Parker Hannifin Corporation. Delivery is required within 20 days of the as-directed order, with FOB destination terms placing all transportation risk and cost on the contractor, and the item must be delivered to Assault Craft Unit One at Naval Amphibious Base Coronado in San Diego, California. The contract is governed by a suite of military and Department of Defense packaging, marking, and handling standards including MIL-STD-147 for palletization, MIL-STD-2073-1E for preservation, and MIL-STD-129 for labeling, with Medical Marking Standard No. 1 superseding MIL-STD-129 for medical items. Units must be sealed in commercial packaging protected with cushioning and internal fittings, and shipped in suitable commercial containers at the lowest freight rate. Palletization is mandatory for shipments exceeding 250 pounds or 20 cubic feet, using 40x48 inch type IV or V 4-way entry pallets with a maximum load height of 54 inches, though exceptions apply for oversized items. Passive RFID tags are required for all shipments to DLA distribution locations except for NSNs in FSCs 6505, 6508, 6509, and 6550. Markings must include the NSN and government unit of issue, with alternate labeling permitted on DD Form 250 for shipments directly to medical facilities. The item is not regulated by the FDA and must comply with DFARS clauses for cybersecurity, safeguarding covered defense information, and NIST SP 800-171 assessment requirements. All shipments must be submitted electronically via WAWF, and the contractor must affirm representations regarding small business status, UEI, and CAGE code, and comply with hazard communication standards per 29 CFR 1910.1200. The solicitation is issued under FAR clauses including 52.213-4 for simplified acquisition and 52.216-1 for contract type, with deviations applied for system maintenance and contract type definition. The inspection and acceptance point is at
General Info
Agency
Contract Value
$1,055NAICS
Place of Performance
NAVAL AMPHIB BASE CORONADO, SAN DIEGO, CA, 92155-5993, USASet-Aside
Awardee
Award Issued Date
Timeline
Submission Closed
Organization & Contact Information
Full Description
TESTING KIT, WATER SALINITY, HAND HELD.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
0 TO 5000 PPM MEASURING RANGE
.
VILLAGE MARINE TECHNOLOGY #
11 JAN 2002 MSC-PNL/HARPER. THIS ITEM IS NOT REGULATED BY THE FDA.
...
SHALL BE MARKED IAW THE LATEST EDITION OF
THE MEDICAL MARKING STANDARD NO. 1.
MMS NO. 1 IS AVAILABLE ONLINE AT:
https://www.dla.mil/Logistics-Operations/Packaging/
PARKER HANNIFIN CORPORATION 62144 P/N 09D-0512T5-500 PARKER HANNIFIN CORPORATION 62144 P/N 40-5000
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7016723598 0001 EA 1.000
NSN/MATERIAL:6630014179288
DELIVERY (IN DAYS):0020
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
SPE2DH-26-T-3810
SECTION B
PR: 7016723598 PRLI: 0001 CONT’D
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:ZZ CLNG/DRY:Z PRESV MAT:ZZ
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z
UNIT CONT:ZZ OPI:A
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:ZZ -ZZ Special Requirements
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PACKAGING AND PACKING SHALL BE COMMERCIAL,
AS SPECIFIED HEREIN.
EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED
IN A SUITABLE SEALED UNIT CONTAINER. WHEN
REQUIRED, UNIT CONTAINER SHALL CONTAIN
INTERNAL FITTINGS, WRAPPING, CUSHIONING,
ETC., CAPABLE OF PROTECTING THE CONTENTS
FROM DAMAGE AND/OR BREAKAGE.
UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL
EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN
NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND
SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT
THE LOWEST RATE, TO POINT OF DELIVERY CALLED
FOR IN THE CONTRACT OR ORDER.
PALLETIZATION SHALL BE IN ACCORDANCE WITH
MIL-STD-147. UNITIZED LOADS SHALL BE USED
WHENEVER TOTAL QUANTITY FOR SHIPMENT TO ONE
DESTINATION EXCEEDS 250 LBS (EXCLUDING THE
PALLET) OR 20 CU FT. LOADS SHALL BE
UNITIZED ON TYPE IV OR TYPE V 4-WAY ENTRY
PALLETS. PALLET SHALL HAVE A LENGTH OF 40
INCHES AND A WIDTH OF 48 INCHES. PALLET
LOAD, INCLUDING THE PALLET, SHALL NOT EXCEED
54 INCHES IN HEIGHT, 43 INCHES IN LENGTH AND
52 INCHES IN WIDTH.
QUANTITY FOR SHIPMENT TO ONE DESTINATION OF
LESS THAN 250 LBS OR 20 CUBIC FEET NEED NOT
BE PALLETIZED.
IF A PROPERLY PALLETIZED LOAD OF A SINGLE
ITEM (EQUIPMENT ITEM AND PALLET) EXCEEDS 54
INCHES IN HEIGHT, HEIGHT LIMITATION NEED NOT
BE ADHERED TO.
IF A SINGLE ITEM EXCEEDS THE MAXIMUM PALLET
LOAD DIMENSIONS, LENGTH AND WIDTH NEED NOT BE
ADHERED TO. CONTACT THE CONTRACTING OFFICER
FOR ADDITIONAL GUIDANCE.
AS AN ALTERNATE, COMMERCIAL UNITIZATION MAY
BE SUPPLIED.
IN ADDITION TO ALL MARKING REQUIREMENTS
SPECIFIED HEREIN AND IN THE APPLICABLE
SPECIFICATION DOCUMENT, ALL SHIPMENTS TO DLA
DISTRIBUTION LOCATIONS SHALL ALSO REQUIRE
PASSIVE RFID TAGS IN ACCORDANCE WITH DFARS
CLAUSE 252.211-7006.
HOWEVER, EXCEPTIONS ARE CURRENTLY APPLICABLE
TO NSNS IN FSCS 6505/6508/6509/6550.
SPE2DH-26-T-3810
SECTION B
PR: 7016723598 PRLI: 0001 CONT’D
LABELING AND MARKING. MATERIAL SHALL BE
LABELED AND MARKED IN ACCORDANCE WITH
COMMERCIAL PRACTICE AND AS SPECIFIED HEREIN.
MARKING ON EACH UNIT SHALL INCLUDE THE NSN
AND GOVERNMENT QUANTITY AND UNIT OF ISSUE.
HOWEVER, EXCEPTIONS ARE CURRENTLY APPLICABLE
TO NSNS IN FSCs 6505 and 6509.
MARKING ON EACH SHIPPING CONTAINER AND/OR UNITIZED LOAD SHALL BE AS SPECIFIED IN MEDICAL MARKING STANDARD NO. 1 ((MMS NO. 1).
ADDITIONAL MARKINGS SHALL BE SUPPLIED IN ACCORDANCE WITH ALL APPLICABLE REGULATORY REQUIREMENTS, FOR ALL ITEMS REQUIRING SPECIAL HANDLING, I.E., CONTROLLED, PERISHABLE AND HAZARDOUS ITEMS.
APPLICABLE TO ALL SHIPMENTS, EXCEPT SHIPMENTS TO DLA DISTRIBUTION LOCATIONS: AS AN ALTERNATE, FOR SHIPMENTS DIRECTLY TO MEDICAL FACILITIES OF ALL ITEMS EXCEPT PERISHABLE ITEMS AND HAZARDOUS MATERIAL, REQUIRED MARKINGS MAY BE SUPPLIED ON THE DD FORM 250 OR PACKING LIST ACCOMPANYING THE SHIPMENT.
MIL-STD-147 IS AVAILABLE ONLINE AT HTTP://QUICKSEARCH.DLA.MIL/
MMS NO. 1 MAY BE OBTAINED BY CONTACTING DLA TROOP SUPPORT, ATTN: MEDICAL SUPPLIER OPERATIONS, FSSB (PACKAGING), VIA EMAIL: DSCP.PACKAGING@DLA.MIL. MMS NO. 1 IS ALSO AVAILABLE ONLINE AT http://www.dla.mil/LandandMaritime/Offers/Services/ http://www.dla.mil/LandandMaritime/Offers/Services/ TechnicalSupport/Logistics/Packaging/MedicalPack1.aspx
PACKAGING AND PACKING SHALL BE COMMERCIAL, AS SPECIFIED HEREIN.
EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED IN A SUITABLE SEALED UNIT CONTAINER. WHEN REQUIRED, UNIT CONTAINER SHALL CONTAIN INTERNAL FITTINGS, WRAPPING, CUSHIONING, ETC., CAPABLE OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR BREAKAGE.
UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT THE LOWEST RATE, TO POINT OF DELIVERY CALLED FOR IN THE CONTRACT OR ORDER.
PALLETIZATION SHALL BE IN ACCORDANCE WITH MIL-STD-147. UNITIZED LOADS SHALL BE USED WHENEVER TOTAL QUANTITY FOR SHIPMENT TO ONE DESTINATION EXCEEDS 250 LBS (EXCLUDING THE PALLET) OR 20 CU FT. LOADS SHALL BE UNITIZED ON TYPE IV OR TYPE V 4-WAY ENTRY PALLETS. PALLET SHALL HAVE A LENGTH OF 40 INCHES AND A WIDTH OF 48 INCHES. PALLET LOAD, INCLUDING THE PALLET, SHALL NOT EXCEED 54 INCHES IN HEIGHT, 43 INCHES IN LENGTH AND 52 INCHES IN WIDTH.
SPE2DH-26-T-3810
SECTION B
PR: 7016723598 PRLI: 0001 CONT’D
QUANTITY FOR SHIPMENT TO ONE DESTINATION OF
LESS THAN 250 LBS OR 20 CUBIC FEET NEED NOT
BE PALLETIZED.
IF A PROPERLY PALLETIZED LOAD OF A SINGLE
ITEM (EQUIPMENT ITEM AND PALLET) EXCEEDS 54
INCHES IN HEIGHT, HEIGHT LIMITATION NEED NOT
BE ADHERED TO.
IF A SINGLE ITEM EXCEEDS THE MAXIMUM PALLET
LOAD DIMENSIONS, LENGTH AND WIDTH NEED NOT BE
ADHERED TO. CONTACT THE CONTRACTING OFFICER
FOR ADDITIONAL GUIDANCE.
AS AN ALTERNATE, COMMERCIAL UNITIZATION MAY
BE SUPPLIED.
IN ADDITION TO ALL MARKING REQUIREMENTS
SPECIFIED HEREIN AND IN THE APPLICABLE
SPECIFICATION DOCUMENT, ALL SHIPMENTS TO DLA
DISTRIBUTION LOCATIONS SHALL ALSO REQUIRE
PASSIVE RFID TAGS IN ACCORDANCE WITH DFARS
CLAUSE 252.211-7006.
HOWEVER, EXCEPTIONS ARE CURRENTLY APPLICABLE
TO NSNS IN FSCS 6505/6508/6509/6550.
LABELING AND MARKING. MATERIAL SHALL BE
LABELED AND MARKED IN ACCORDANCE WITH
COMMERCIAL PRACTICE AND AS SPECIFIED HEREIN.
MARKING ON EACH UNIT SHALL INCLUDE THE NSN
AND GOVERNMENT QUANTITY AND UNIT OF ISSUE.
HOWEVER, EXCEPTIONS ARE CURRENTLY APPLICABLE
TO NSNS IN FSCs 6505 and 6509.
MARKING ON EACH SHIPPING CONTAINER AND/OR UNITIZED LOAD SHALL BE AS SPECIFIED IN MEDICAL MARKING STANDARD NO. 1 ((MMS NO. 1).
ADDITIONAL MARKINGS SHALL BE SUPPLIED IN ACCORDANCE WITH ALL APPLICABLE REGULATORY REQUIREMENTS, FOR ALL ITEMS REQUIRING SPECIAL HANDLING, I.E., CONTROLLED, PERISHABLE AND HAZARDOUS ITEMS.
APPLICABLE TO ALL SHIPMENTS, EXCEPT SHIPMENTS TO DLA DISTRIBUTION LOCATIONS: AS AN ALTERNATE, FOR SHIPMENTS DIRECTLY TO MEDICAL FACILITIES OF ALL ITEMS EXCEPT PERISHABLE ITEMS AND HAZARDOUS MATERIAL, REQUIRED MARKINGS MAY BE SUPPLIED ON THE DD FORM 250 OR PACKING LIST ACCOMPANYING THE SHIPMENT.
MIL-STD-147 IS AVAILABLE ONLINE AT HTTP://QUICKSEARCH.DLA.MIL/
MMS NO. 1 MAY BE OBTAINED BY CONTACTING DLA TROOP SUPPORT, ATTN: MEDICAL SUPPLIER OPERATIONS, FSSB (PACKAGING), VIA EMAIL: DSCP.PACKAGING@DLA.MIL. MMS NO. 1 IS ALSO AVAILABLE ONLINE AT http://www.dla.mil/LandandMaritime/Offers/Services/ http://www.dla.mil/LandandMaritime/Offers/Services/ TechnicalSupport/Logistics/Packaging/MedicalPack1.aspx
APPLICABLE TO ALL MEDICAL ACQUISITIONS:
PACKAGING AND PACKING SHALL BE COMMERCIAL AS
SPE2DH-26-T-3810
SECTION B
PR: 7016723598 PRLI: 0001 CONT’D
SPECIFIED IN THE PROCUREMENT DOCUMENT.
EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED
IN A SUITABLE SEALED UNIT CONTAINER CAPABLE
OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR
BREAKAGE.
UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL
EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN
NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND
SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT
THE LOWEST RATE, TO POINT OF DELIVERY CALLED
FOR IN THE CONTRACT OR ORDER.
MATERIAL MUST BE MARKED IAW MEDICAL MARKING
STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES
TO MIL-STD-129.
COPIES OF MEDICAL MARKING STANDARD NO. 1
(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA
TROOP SUPPORT VIA EMAIL TO fssb@dla.mil. MMS NO. 1 IS ALSO AVAILABLE ONLINE AT: https://www.dla.mil/Logistics-Operations/Packaging/
PARCEL POST ADDRESS:
N53257
ASSAULT CRAFT UNIT ACU 1
COMM 619 437 5993 DSN 577 5993
NAVAL AMPHIB BASE CORONADO
SAN DIEGO CA 92155-5993
US
RDD 777 SHIPMENT. SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
N53257
ASSAULT CRAFT UNIT ONE
NAB CORONADO
3226 TARAWA RD BLDG 109
SAN DIEGO CA 92155
US
M/F: (TCN) N5325742351241
RDD: 777
PROJ: ZH9 TP 2
SUPP ADD: N48096 SIG: C
FOR GOVERNMENT USE ONLY: (IPD) 05
DIC: A4A DIST: V9B ADV: 2A FC: VO
Need Ship Date:00/00/0000 Original Required Delivery Date:05/13/2026
SPE2DH-26-T-3810 NSN/Part Number: 6630-01-417-9288 Quantity: 1 EA Purchase Request: 7016723598QTY: 1 Delivery: 20 days ADO
More opportunities from Department Of Defense → MEDICAL SUPPLY CHAIIN FSH
Same awarding agency
Find Active Opportunities Like This
Get AI-powered intelligence on the opportunities still open
Every page of the solicitation package shredded into a compliance breakdown
AI-powered matching based on your capabilities and past performance
Competitor and incumbent history on the requirement
Automated alerts on amendments, Q&A deadlines, and award
Join 650+ contractors already using CLEATUS