This Presolicitation opportunity was posted on May 10, 2013. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

TF-34 TURBOFAN ENGINE; SUPPORT, SHROUD

Awarded

SPE4A713R0965Federal

Submission Closed06/27/2013, 08:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 336412

New

Federal

Combustion Chamber Liner SupplyThis subcontract involves the manufacture and supply of 1,500 combustion chamber liners, part number 9978M51G18, for prime contractors supporting Department of the Air Force F108 engine projects. The components must be produced using high-temperature alloys and precision machining in strict accordance with MQR-PSD-1 Revision 2 and AFMC technical publications. The scope of work includes comprehensive quality assurance, non-conformance reporting, and the provision of all necessary technical data and compliance documentation. Managed under NAICS code 336412 and associated with the Department of Defense via DLA Aviation at Oklahoma City, the contract requires a high level of technical precision. Interested parties must adhere to the response deadline of December 6, 2026. The final delivery consists of the specified liners along with the required supporting documentation to ensure full operational compliance for the F108 engine program.

Ok DLA Aviation At Oklahoma City

POSTED

DEADLINE

Turbine Powerhead Supply (NSN 7RH 2835-01-566-5097)

Pa DLA Aviation At Philadelphia

POSTED

DEADLINE

Manufacture of Disk and Hub, Fan (F108 Platform)

Ok DLA Aviation At Oklahoma City

POSTED

DEADLINE

F138-100 engine sustainment

Solicitation # F138_Follow-on_10052026

The Department of the Air Force, specifically the Air Force Life Cycle Management Center, is conducting market research via a Sources Sought Synopsis to identify capable industry sources for a potential follow-on F138-100 engine sustainment contract supporting C-5M aircraft. This notice is for planning purposes only and is not a formal solicitation or commitment to award. The anticipated scope of work involves comprehensive whole engine and component management and repair, including material management, depot-level maintenance, supply chain support for core engine parts and line replaceable units, and the development of maintenance build plans using Reliability Centered Maintenance Plus principles. Additionally, the requirement encompasses airworthiness certification compliance, engineering investigations, and the management of Government-furnished property. Interested parties are requested to submit a capabilities statement by November 19, 2026, detailing their technical expertise, facilities, and relevant experience from the past five years. The government is seeking information on business size and socioeconomic status under NAICS code 336412 to inform its future acquisition strategy, which remains undetermined regarding contract type, period of performance, and set-aside approach. Respondents must provide details on their quality programs, such as ISO 9001 or AS9100, and their ability to comply with applicable Technical Orders and FAR clause 52.219-14. All responses should be submitted electronically to the Procurement Contracting Officer and are limited to 20 single-spaced pages.

POSTED

DEADLINE

DISK AND HUB,FAN,AI_End_Item_F108_NSN_2840011878164PN_PN_305-026-618-0

Solicitation # FD20302700591

The Department of the Air Force, through the 421st Supply Chain Management Squadron at Tinker AFB, is conducting market research via a Sources Sought Synopsis for the procurement of Disk and Hub, Fan, AI (NSN 2840011878164PN, Part Number 305-026-618-0) for the F108 platform. This effort aims to identify potential sources capable of the new manufacture of an estimated 1,500 units, including all necessary labor, materials, inspection, testing, and packaging. The government is using this process to determine if the requirement can be competitive or established as a Small Business Set-Aside, and is open to all business types, including various small business designations under NAICS code 336412. Interested sources must submit their business information and a Source Approval Request (SAR) package to be considered. The SAR process requires a valid Company Profile on record with the Engineering Support Activity and the submission of detailed production documentation, such as Travelers, Process Operation Sheets, and Inspection Method Sheets. Technical data may be acquired through the Tinker Engineering Drawings Public Sales Desk. While no formal solicitation or funding is available at this time, the government is evaluating potential sources based on their ability to meet Manufacturing Qualification Requirements and their quality history over the last 36 months. Responses to this notice are requested by November 12, 2026.

Ok DLA Aviation At Oklahoma City

POSTED

DEADLINE

Solicitation # N0010426QNE10

This solicitation is for the procurement of a pressure reducing valve assembly, specifically model RV29G-3, to be used in crucial shipboard systems. Due to the high risk associated with failure, the material is designated as Special Emphasis material, requiring strict adherence to quality control, oxygen cleaning per MIL-STD-1330, and comprehensive testing certifications. Key requirements include specific material certifications for components made from QQ-N-281 and QQ-N-286, non-destructive testing for weldments, and strict pressure and time tolerances for testing. The contract mandates a one-year warranty from the date of delivery and requires the contractor to provide a signed letter of authorization if they are not the original equipment manufacturer. All deliverables must be submitted via Wide Area Workflow (WAWF) and approved by the Portsmouth Naval Shipyard prior to shipment. The award is DO certified for national defense under the Defense Priorities and Allocations System, and the contractor must maintain a total equipment baseline configuration, submitting any engineering change proposals for government approval.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Solicitation # SPRPA127QYA54

Solicitation SPRPA127QYA54, issued by the Defense Logistics Agency (DLA) Aviation office in Philadelphia, is a request for 15 gas engine starters. This acquisition is conducted under Emergency Acquisition Flexibilities (EAF) authority and is restricted to government-approved sources of supply; distributors must provide an authorized distributor letter on the manufacturer's letterhead to be considered technically acceptable. The procurement falls under NAICS code 336412 with a small business size standard of 1500. Delivery is required within 90 days on a FOB Destination basis, with both inspection and acceptance occurring at the origin. The award will be a single award based on a primary evaluation of past performance, utilizing the DoD Supplier Performance Risk System (SPRS) color ratings, with price serving as a secondary factor. Quality requirements include compliance with ISO 9000 or equivalent and specific calibration standards such as NCSL Z540.3 or ISO 10012. The contract incorporates strict packaging and marking standards, including MIL-STD-2073 and MIL-STD-129, and identifies the items as Critical Safety Items under DFARS 252.209-7010. Invoicing and receiving reports must be processed electronically through the Wide Area WorkFlow (WAWF) system.

Pa DLA Aviation At Philadelphia

POSTED

DEADLINE

Solicitation # SPRPA127QYA50

Solicitation SPRPA1-27-Q-YA50 is a fixed-price acquisition issued by the Defense Logistics Agency (DLA) Aviation at Philadelphia for the procurement of one hydraulic actuator (NSN 2840-01-543-5920). This requirement is issued under Emergency Acquisition Flexibilities (EAF), also known as Special Emergency Procurement Authority (SEPA). The acquisition is categorized under NAICS code 336412 with a small business size standard of 1500. A critical requirement for eligibility is that offerors must be government-approved sources of supply; distributors must provide an authorized distributor letter on the source's letterhead at the time of proposal submission to be deemed technically acceptable. The government intends to make a single award based on the most advantageous offer, prioritizing past performance over price. Past performance will be evaluated using the DoD Supplier Performance Risk System (SPRS) color ratings. The contractor must maintain a quality management system compliant with ISO 9000 or an equivalent standard. Packaging and marking must strictly adhere to MIL-STD-2073 and MIL-STD-129, including specific DLR labeling and ISPM 15 compliance for wood packaging. Inspection and acceptance will occur at the origin. Invoicing and payment will be processed electronically through the Wide Area WorkFlow (WAWF) system. Proposals must be submitted via email to the primary point of contact, Amanda Bird.

Pa DLA Aviation At Philadelphia

POSTED

DEADLINE

Solicitation # SPRPA127QYA51

Solicitation SPRPA127QYA51 is an emergency acquisition issued by the DLA Aviation at Philadelphia under Emergency Acquisition Flexibilities authority for the procurement of one fuel metering pump. The acquisition is categorized under NAICS code 336412 and is not a small business set-aside. To be considered technically acceptable, offerors must be government-approved sources of supply, and distributors are required to provide an authorized distributor letter on the source's letterhead. The government intends to make a single award based on the most advantageous offer, prioritizing past performance over price. Evaluation will include risk assessments via the DoD Supplier Performance Risk System regarding item, price, and supplier risk. The contract requires compliance with ISO 9000 or equivalent quality standards and mandates that inspection and acceptance occur at the origin. Packaging and marking must strictly adhere to MIL-STD-2073 and MIL-STD-129, with specific requirements for Depot Level Repairable labels and palletization. Payment and invoicing will be processed electronically through the Wide Area WorkFlow system. Key regulatory inclusions involve the Buy American Act, Balance of Payments Program, and safeguarding of covered defense information. Proposals must be submitted electronically to the primary point of contact, Amanda Bird, by the deadline of December 7, 2026.

Pa DLA Aviation At Philadelphia

POSTED

DEADLINE

LINER,COMBUSTION CH_End_Item_F108_NSN_2840013443232PN_PN_9978M51G18

Solicitation # FD20302700587

The Department of the Air Force, specifically the 421st Supply Chain Management Squadron at Tinker AFB, is conducting market research via a Sources Sought Synopsis to identify potential sources for the procurement of combustion chamber liners for the F108 platform. The requirement involves the manufacture of part number 9978M51G18, identified by NSN 2840013443232PN, with an estimated spares requirement date of October 27, 2028. This effort is categorized under NAICS code 336412 and is open to all business types, including large and various small business designations, to determine if the future contract should be a competitive solicitation or a small business set-aside. Interested sources must be capable of providing all labor, materials, and equipment for the new manufacture of the items, including inspection, testing, packaging, and shipping. Because these are propulsion critical safety items, potential sources are required to complete a Source Approval Request package and adhere to the MQR-PSD-1 qualification requirements. This includes providing a valid quality assurance certificate such as ISO 9001, AS9100, or NATO AQAP-2070, and submitting detailed production documents and sub-tier supplier lists. Responses, including detailed business information and the required SAR package, must be submitted electronically via DoD SAFE by December 5, 2026.

Ok DLA Aviation At Oklahoma City

POSTED

DEADLINE

Manufacturing of Non-Aircraft Gas Turbine Engine FansThis subcontract involves the manufacture and supply of three non-aircraft gas turbine engine fans for the Department of Defense, specifically for the DLA Weapons Support ASC Commodities Division. The contractor is responsible for fabricating the fans to NSN 2835-01-664-6849 specifications utilizing casting and precision machining. All deliverables must adhere to MIL-STD-129 marking and MIL-STD-2073-1E packaging standards to ensure regulatory compliance. To qualify for this project, the provider must hold a quality management certification in either ISO 9001 or SAE AS9003. The work is categorized under NAICS code 336412 and will be performed in New Cumberland. Interested parties must respond by November 12, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Aerospace Tailpipe Manufacturing and AssemblyThis subcontract involves the primary fabrication and assembly of six Aircraft G Tailpipes under NSN 2840-01-475-0706 for the Department of Defense DLA Weapons Support ASC. The project requires the use of precision machining, forming of aerospace-grade alloys, and welding compliant with aerospace standards to ensure all structures meet OEM technical drawings. Performance will take place in New Cumberland. To be eligible, contractors must maintain a CMMC Level 2 Self-Assessment and hold quality certification per ASQ H1331 or MIL-STD-1916. The solicitation was posted on November 4, 2026, with a response deadline of November 12, 2026. The work falls under NAICS code 336412.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 24 hours ago

DEADLINE

in 7 days

AI Contract Overview

Purchase Request 1000010137 is an indefinite quantity contract solicitation issued on May 28, 2013, for shroud supports used in TF-64 turbofan engines. The procurement covers a base year and four option periods, with an estimated annual quantity of 112 units and a maximum of 168. This action is strictly set aside for Service-Disabled Veteran-Owned Small Business concerns and is intended as a sole source procurement under FAR 6.302. The contract requires adherence to source, configuration, and export controls, with mandatory Government First Article Testing. Delivery timelines are set at 322 days after receipt of order without testing and 562 days with testing. Proposals must be submitted electronically to the bid custodian by June 27, 2013, and may be subject to a reverse auction process via the Procurex system.

General Info

Agency

N/A

Contract Value

NAICS

336412 - Aircraft Engine and Engine Parts Manufacturing

Place of Performance

USA

Set-Aside

SDVOSBC

Awardee

UNION MACHINE COMPANY OF LYNN, INC

Award Issued Date

09/27/2013, 12:00:00 AM UTC

Documents

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseAwarded

PostedMay 10

Presolicitation

AwardedSep 27

Contract was awarded

Submission Closed

06/27/2013, 08:00:00 PM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyN/A

Contacts2 people available

OfficeN/A

Organization / Agency

N/A

Office AddressN/A

Contacts

Holly V SimmonsAcquisition Specialist

contact@example.gov

+1 (555) 000-0000

Carlos R. PillotContracting Officer

contact@example.gov

+1 (555) 000-0000

Full Description

Purchase Request #: 1000010137 Issue date: May 28, 2013 Closing Date: June 27, 2013 Type of Procurement: Indefinite Quantity Contract This solicitation is for a base year and four option periods Estimated Annual Quantity: 112 Maximum Annual Quantity: 168 DLA Direct (Stock) NSN: 2840-00-060-0042 Nomenclature: Support, Shroud End Item Application: TF-64 Turbofan Engine Inspection & Acceptance: Origin FOB: Destination OEM: General Electric Company (CAGE 03350/99207 Approved sources: TSS Technologies (CAGE 28884) and Union Machine Company of Lynn (CAGE 51992) P/N 5026T65G01 Source Control applies Configuration Control applies Export Control applies Government First Article Testing required PLT at Contractor's facility Delivery without FAT: 322 days ARO Delivery with FAT: 562 days ARO The proposed contract is set-aside for Sole Source Service-Disabled Veteran-Owned small business concerns. Offers from other than Service-Disabled Veteran-Owned small business concerns will not be considered. The proposed contract action is for supplies or services for which the Government intends to solicit and negotiate with only one or a limited number of sources under the authority of FAR 6.302. Interested persons may identify their interest and capability to respond to the requirement or submit proposals. This notice of intent is not a request for competitive proposals. However, all proposals received within forty-five days (thirty days if award is issued under an existing basic ordering agreement) after date of publication of this synopsis will be considered by the Government. A determination by the Government not to compete with this proposed contract based upon responses to this notice is solely within the discretion of the Government. Information received will normally be considered solely for the purpose of determining whether to conduct a competitive procurement. Based upon market research, the Government is not using the policies contained in Part 12, Acquisition of Commercial Items, in its solicitation for the described supplies or services. However, interested persons may identify to the contracting officer their interest and capability to satisfy the Government's requirement with a commercial item within 15 days of this notice. This solicitation will include provision 52.215-9023, Reverse Auction. Since a reverse auction may be conducted, offerors are encouraged to access the Procurex system and review the reverse auction help tutorials at https//dla.procurexinc.com to learn more about how to participate in an auction. A copy of the solicitation will be available via the DLA Internet Bid Board System at https://www.dibbs.bsm.dla.mil/RFP on the same issue date cited in the solicitation. Choose the RFP you wish to download. Solicitations are in portable document format (PDF). To download and view these documents you will need the latest version of Adobe Acrobat Reader. This software is available free at http://www.adobe.com. A paper copy of the solicitation will not be available to requestors. All proposals must be submitted to the Bid Custodian via email: contact@example.gov or fax +1 (555) 000-0000 to be considered for an award. Do not submit proposals directly to contracting officer or contracting specialist.