Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

The Supply and Delivery of Guard Rail

Active
SK-119-2025-3International

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The Government of Saskatchewan, through SaskBuilds and Procurement, is conducting a continuous onboarding process for suppliers to provide and deliver guard rail under Solicitation Number SK-119-2025-3, which is a repost of RFSQ 119-2025 originally posted in March 2026. Suppliers previously prequalified under the original RFSQ are not required to reapply and should consult the existing list of qualified vendors. The solicitation is open for submissions until March 31, 2031, and is specifically focused on the supply and delivery of guard rail as outlined in the RFSQ particulars. Participation is exclusively through the Government Enterprise Management (GEM) system, where all documentation, amendments, and communications will be posted. To engage, suppliers must be registered in GEM’s electronic bidding platform, requiring new participants to complete a self-registration process via the Supplier Portal. Only registered suppliers may access documents, submit inquiries, receive updates, and submit bids. The procurement is classified under NAICS code 237310 and is managed by the Government of Saskatchewan, with performance expected within the province. All inquiries should be directed to purchasing@gov.sk.ca, and potential suppliers are advised to monitor the GEM system regularly for any changes or clarifications.

General Info

Saskatchewan government seeks guard rail suppliers via continuous RFSQ until March 31, 2031.

Agency

Government of Canada → SaskBuilds and Procurement

NAICS

237310 - Highway, Street, and Bridge ConstructionView NAICS

Place of Performance

Saskatchewan, CAN

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyGovernment of Canada → SaskBuilds and Procurement
Contacts1 person available
OfficeN/A
Organization / Agency
Government of Canada → SaskBuilds and Procurement
Office AddressN/A
Contacts
See Part 1.2 - RFSQ ContactContracting Authority

Full Description

Show more
This Request for Supplier Qualifications (RFSQ) is a continuous onboarding process. This is a repost of RFSQ 119-2025, posted on March 26, 2026. Suppliers who were previously prequalified through this RFSQ do not need to respond to this reposting. Please refer to RFSQ 119-2025 award details for the most up to date list of pre-qualified suppliers. The RFSQ is an invitation by the Government of Saskatchewan (GOS) to prospective Respondents to provide Responses for the provision of the Supply and Delivery of Guard Rail, as further described in the RFSQ Particulars. Additional InformationParticipation process: Competition documents for this procurement are available through the Government of Saskatchewan’s Government Enterprise Management (GEM) system. All amendments, addenda, clarifications, and further instructions will be posted on GEM. To participate, suppliers must be registered in GEM’s electronic bidding platform. Registration is mandatory to download competition documents, submit questions, receive updates (e.g., amendments, addenda, clarifications) and submit a bid. How to Participate: Click the link: Negotiation Abstracts Page Enter the competition number, title, or type into the search bar to locate the opportunity Click on the competition Select the Sign In button to log into GEM New to GEM? Suppliers who are not yet registered must complete the Self-Registration process by clicking the Register button on the Negotiation Abstracts Page within GEM, or via the link Supplier Registration. To learn more about GEM and the Supplier Portal, please visit Procurement in GEM. For support or inquiries, contact purchasing@gov.sk.ca

Similar Contracts

Same NAICS industry code

NAICS: 237310
New
SLED
Fisherman’s Terminal (FT) Entry and Exit Paving RedevelopmentThe Fishermen’s Terminal Entry Redevelopment Project will comprehensively reconfigure the entry and exit drives along 19th Ave W, demolish the remaining slab of the Downie Building (C-14), and transform the footprint into a mix of new parking spaces and green areas designed as pollinator habitats, with potential integration of a stormwater treatment facility. Existing pavement in deteriorated condition will be milled and overlaid, while stormwater infrastructure will be entirely replaced and expanded to divert runoff from combined sewer lines to dedicated storm lines, including water quality treatment on qualifying surfaces. A new irrigation system will support the landscaped areas, and landscaping will also be installed in the rebuilt median within the entry drive. Electric vehicle charging stations will be incorporated into the new parking zone. The project will enhance multimodal access by adding a protected two-way bike lane connecting the terminal to the West Wall bike path, improving pedestrian pathways to the intersection of 21st Ave W and W Emerson Pl, and linking directly to the King County Metro bus stop. Lighting will be upgraded throughout the new parking area and pedestrian corridors, and wayfinding signage will be installed to guide cyclists and pedestrians. All improvements are intended to modernize the terminal’s entry experience, support sustainable transportation, and reduce environmental impact through better stormwater management and habitat creation. The project is being managed by the Port of Seattle through its Waterfront Project Management team, with primary contact information publicly available for inquiries and coordination.
Waterfront Project Management

POSTED

about 10 hours ago

DEADLINE

N/A
View Details
NAICS: 237310
New
SLED
Asphalt Paving & Striping Portwide Unit Price 2026The contract encompasses a wide range of pavement and infrastructure maintenance activities to be performed across multiple sites within the Seattle-Tacoma International Airport, Maritime Properties, and surrounding areas. Work includes new asphalt paving and patching, overlays with fabric, crack sealing, seal coating, profile grinding, removal and disposal of grinding spoils, stripping and removal of existing pavement markings, surface preparation for new striping, stripe painting, saw cutting and coring of non-hazardous concrete and asphalt, installation of concrete wheel stops, curb repair and replacement, lifting and leveling of concrete sidewalks, and upgrades to road drainage systems, which may require obtaining permits. All tasks are to be executed under a unit price structure, with pricing based on predefined line items for each service. This solicitation, titled Asphalt Paving & Striping Portwide Unit Price 2026, is a forecast under NAICS code 237310 and is managed by the Port of Seattle through its Port Construction Services division. Primary point of contact is Heather Bowden, with Lesley Miles serving as Project Manager, both reachable via official Port of Seattle contact information. The contract does not specify a solicitation number or set-aside type, and performance locations span the Port’s expansive operational footprint without a single designated address. All work must comply with Port standards and procedures, and contractors are expected to coordinate logistics, permitting, and site-specific requirements across distributed locations.
Port Construction Services

POSTED

about 10 hours ago

DEADLINE

N/A
View Details
NAICS: 237310
New
International
2026 Territorial Drive Widening - Phase 1 & 2The 2026 Territorial Drive Widening Phase 1 & 2 Project aims to enhance traffic operations, safety, and capacity along a major corridor in the City of North Battleford, Saskatchewan. Phase 1 focuses on widening the intersection of Territorial Drive and the adjacent Service Road to increase turning radii and pavement width, improving maneuverability for all vehicles, particularly large commercial trucks, transit buses, and emergency vehicles, while also including a pavement overlay on the southbound lanes to extend their service life. Phase 2 extends the widening efforts northbound from the Carlton Trail intersection to the Airport Road intersection, adding lane width to improve traffic flow and reduce congestion on this heavily used stretch of roadway. The project is being executed in two distinct phases to ensure systematic improvements across the corridor while minimizing long-term disruption. All qualified contractors are invited to submit bids to perform the work as the Prime Contractor, with proposals due to the City Clerk's Department by August 6, 2026, either by mail or email. Questions regarding the bid documents must be submitted by August 4, 2026. The solicitation is identified by number 20260724 and was posted on July 25, 2026, with the formal closing time set for 8:30 PM on the due date. Bids must be directed to the City Clerk’s Department at 1291-101st Street, PO Box 460, North Battleford, SK S9A 2Y6, or emailed to tenders@cityofnb.ca, with the City Clerk’s Department serving as the primary point of contact for all inquiries.
City of North Battleford

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 237310
New
SLED
2026 Roadway Improvement Program, Contract No. 11100-012The contract pertains to the 2026 Roadway Improvement Program, Contract No. 11100-012, under the Borough of Newtown in Bucks County, Pennsylvania, and involves comprehensive roadway improvements including full-width mill and overlay of 1,095 square yards and 105 tons of pavement, along with 745 square yards of pavement repair. Additional scope includes replacing two handicap ramps with 60 linear feet of curb and 300 square feet of sidewalk, repairing 30 linear feet of property owner curb, performing 170 square yards of additional pavement repair, placing 25 tons of leveling and scratch course material, replacing two traffic signs, and reinstalling all pavement markings. All work is subject to the Public Works Employment Verification Act and the Pennsylvania Prevailing Wage Act, requiring compliance with wage standards and submission of a completed Employment Verification Form as a condition of bid submission. Bids must include a certified check or bid bond equal to 10% of the total bid amount, along with a fully completed Bid Form, Bidder’s Qualification Statement, executed Anti-Collusion Affidavit, and signed acknowledgement of Borough Ordinance No. 788. Failure to submit any of these documents will result in bid disqualification. The contract will be awarded to the lowest responsible bidder, though the Borough retains the right to reject any or all bids and waive minor irregularities. Upon award, a Performance Bond equal to 100% of the contract price is mandatory. Proposals are due by August 17, 2026, at 2:00 PM, and the project falls under the jurisdiction of the Pennsylvania Department of Transportation’s MS-944 guidelines as outlined in the Contract Documents.
Bucks County

POSTED

1 day ago

DEADLINE

in 22 days
View Details

More opportunities from Government of Canada → SaskBuilds and Procurement

Same awarding agency

NAICS: 336411
International
Manufacture and Supply of up to Four New Multi-Engine Turbo Prop Pressurized AircraftThe Government of Saskatchewan, through SaskBuilds and Procurement, is seeking proposals to manufacture and supply up to four new multi-engine turboprop pressurized aircraft to replace its current fleet of four Beechcraft King Air B200s, which are equipped with medical interiors for air ambulance services across the province. This initiative is part of a five-year fleet replacement plan aimed at enhancing safety and dispatch reliability for patient and medical crew transport. The solicitation, identified as SK-9123, invites qualified manufacturers to submit detailed proposals by the deadline of August 7, 2026, with an optional virtual proponent meeting scheduled for June 22, 2026, to provide insight into procurement requirements and deliverables. Interested parties must register their attendance by June 18, 2026, by emailing rfxquestions@gov.sk.ca with attendee names and any preliminary questions. The RFP is classified under NAICS code 336411 for aircraft manufacturing and is open to all eligible proponents without specific set-asides. While the agency is listed as SaskBuilds and Procurement under the Government of Saskatchewan, the tender is hosted on the federal platform Canadabuys, and the point of contact is Ryan Gianoli, Contracting Authority. Proposals must address technical specifications for aircraft capable of operating in Saskatchewan’s diverse environmental conditions, including medical interior configurations, maintenance support, and compliance with regulatory standards. Any updates or changes to the procurement process will be communicated through SaskTenders via official addenda, and attendance at the proponent meeting is strongly encouraged to ensure a complete understanding of requirements before submission.
Aircraft Manufacturing

POSTED

about 2 months ago

DEADLINE

in 13 days
View Details
NAICS: 561210
International
Garment and Facility Support AccessoriesThe Government of Saskatchewan, through SaskBuilds and Procurement, is seeking qualified suppliers to provide a comprehensive service program for industrial workwear, personal protective equipment, and facility support accessories under solicitation number SK-112-2025_Cont. The contract involves the supply, laundering, repair, maintenance, and replacement of garments and related accessories essential for daily government operations. This is an ongoing pre-qualification process, posted continuously on SaskTenders with a response deadline of May 30, 2031, and evaluations conducted quarterly or as determined by the government. Respondents must meet established qualifications and requirements, and those not selected are barred from reapplying for three months after their submission. The service is to be performed across Saskatchewan, and all responses are evaluated under consistent criteria throughout the term. The solicitation, classified under NAICS code 561210, is managed by the Contracting Authority Jaspal Singh, and inquiries can be directed to rfxquestions@gov.sk.ca. While the posting references the Government of Canada as the agency name, the performance location and contracting authority are clearly within the Government of Saskatchewan. The onboarding window for new respondents remains open until six months before the contract’s expiration, ensuring a steady pipeline of qualified vendors. Participation in this process requires adherence to the standardized terms and evaluation methods outlined in the initial RFSQ document, with no revisions allowed for subsequent submissions. Successful respondents will be integrated into a long-term operational support framework critical to workplace safety and facility functionality across provincial operations.
Facilities Support Services

POSTED

2 months ago

DEADLINE

in almost 5 years
View Details