Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Thermal Shroud Design & Installation

Active

Federal

Response Deadline08/07/2026, 04:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract entails the design, fabrication, and installation of multi-layer thermal shrouds using cryogenic-grade materials such as aluminum foil and multilayer insulation to maintain precise thermal control in extreme low-temperature environments. The work requires detailed thermal modeling to ensure performance under operational conditions and seamless integration with the Thermal Control Unit to sustain cryogenic temperatures reliably. All components must meet stringent aerospace standards for durability, insulation efficiency, and compatibility with existing systems. Performance is expected at NASA Glenn Research Center in Cleveland, Ohio, with a deadline for responses set for August 7, 2026. This is a subcontract opportunity classified under NAICS code 332430, which pertains to other fabricated metal product manufacturing. The solicitation was posted on July 10, 2026, and while no set-aside designation or point of contact is provided, the requirement is clearly geared toward specialized contractors with expertise in cryogenic thermal systems and aerospace-grade fabrication.

General Info

Design, fabricate, and install cryogenic thermal shrouds for NASA Glenn by August 7, 2026, meeting aerospace standards.

Agency

National Aeronautics And Space Administration → NASA Glenn Research CenterView Agency

NAICS

332430View NAICS

Place of Performance

Cleveland, OH, 44135, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 10

subcontract

Response DeadlineAug 7

Submission deadline

Response Deadline

08/07/2026, 04:00:00 PM UTCin 11 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyNational Aeronautics And Space Administration → NASA Glenn Research Center

ContactsNo contacts available

OfficeN/A

Organization / Agency

National Aeronautics And Space Administration → NASA Glenn Research Center

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Design, fabricate, and install multi-layer thermal shrouds using cryogenic materials like aluminum foil and MLI. Includes thermal modeling and integration with the TCU for cryogenic temperature maintenance.

Similar Contracts

Same NAICS industry code

Military-Grade Packaging & Preservation ServicesThe contract requires comprehensive cleaning, drying, and preservation of valves in accordance with MIL-STD-2073-1E using method AE, ensuring they meet military standards for long-term storage and transport. The valves must be packed in a D3 military container, designed to protect against environmental degradation and maintain operational readiness throughout extended storage and transit periods. All work must comply strictly with the technical specifications outlined in the standard to guarantee performance and durability under demanding conditions. The solicitation is issued as a subcontract under NAICS code 332430, targeting specialized industrial packaging services for the Department of Defense. Performance is required at Pearl Harbor, HI, with a response deadline of August 6, 2026. The contract is administered by the Maritime Supply Chain ESOC Buys office, reflecting its relevance to naval and maritime logistics. While no set-aside designation is specified, the nature of the work demands expertise in military-grade preservation protocols and certified handling procedures for defense-critical components.

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Defense Item Packaging and Preservation ServicesThe contract requires the provision of packaging, preservation, and containerization services for defense items in full compliance with MIL-STD-2073-1E standards, ensuring that all materials and methods meet military specifications for long-term storage and transportation. This includes the use of approved moisture barriers and certified materials designed to protect sensitive equipment from environmental degradation, corrosion, and physical damage during handling and storage. All work must adhere strictly to the technical requirements outlined in the standard to maintain the readiness and reliability of defense assets. The solicitation is issued as a subcontract under the NAICS code 332430, with a response deadline of August 3, 2026, and a posted date of July 23, 2026. Performance is to be carried out at a designated location in New Cumberland, Pennsylvania, with a zip code of 17070-5002. The contracting organization is the Active Devices Division within the Department of Defense, and while specific point of contact details are not provided, all proposals must be submitted through the designated DIBBS portal linked in the contract data. The scope requires precision, documentation, and adherence to defense-grade packaging protocols to ensure mission-critical items remain viable and functional over extended periods.

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Military-Standard Packaging and KittingThe contract requires the packaging, unitizing, and kitting of defense-related items, specifically vehicular panels, in strict adherence to military standards. All work must incorporate unique identifiers, question and answer packages, contract and CLIN references, and government-mandated markings to ensure traceability and compliance. The performance location is designated as Fort Stewart, Georgia, with a zip code of 31314-5185, and the work falls under NAICS code 332430, indicating manufacturing related to metal stamping and fabrication for defense applications. This is a subcontract opportunity issued by the Department of Defense through the Land Supply Chain office, and responses must be submitted by August 3, 2026, with the solicitation posted on July 22, 2026. All activities must align with federal defense logistics protocols and require precise execution to meet operational readiness requirements.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Commercial Supplier of Valve Components or Raw MaterialsThe contract pertains to the supply of raw materials such as stainless steel and brass, or sub-components including seals and stems, essential for the manufacturing of valves. It is issued as a subcontract under NAICS code 332430 by the Department of Defense through its LAND SUPPLY CHAIN organization, with performance required at Cherry Point, North Carolina, ZIP 28533-5040. The solicitation was posted on July 21, 2026, and responses must be submitted by August 3, 2026. The contract does not specify any set-aside classification, indicating it is open to all eligible suppliers without preference for small business or other categories. All offerings must meet the technical and quality requirements necessary for defense-grade valve production, and interested parties must reference the official solicitation link to access full specifications and submission guidelines.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Hazardous Materials Packaging and Compliance ServicesThe contract requires the provision of certified military-compliant packaging for a government-supplied hazardous item, strictly adhering to MIL-STD-2073-1E and DLA RP001 standards to ensure the packaging remains clean, dry, and free from corrosion. All work must meet rigorous defense logistics specifications to guarantee the integrity and safety of the hazardous material throughout storage and transit. The subcontract is issued under NAICS code 332430 and is managed by the Department of Defense through its Construction & Equipment Containers division, with performance required at the specified location in Suffolk, Virginia, zip code 23435-5000. Bidders must submit their proposals by the deadline of August 3, 2026, and the opportunity is open under a subcontractual arrangement without a specified set-aside classification.

CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

DEADLINE

Military Packaging & Preservation ServicesThe contract requires the packaging and preservation of electronic components in strict compliance with MIL-STD-2073-1, MIL-STD-129, and AFMC Form 158, ensuring all items meet military standards for durability, identification, and handling. Special attention must be given to hazardous materials and electrostatic discharge-sensitive components, with appropriate labeling applied to prevent damage and ensure safety throughout the supply chain. The work is classified as a subcontract under NAICS code 332430 and is managed by the Department of Defense through the Ut DLA Aviation at Ogden office, with all packaging activities intended to support military logistics and readiness requirements. Responses to this opportunity must be submitted by August 22, 2026, at 5:59 a.m. Eastern Time, with no set-aside designations specified, making it open to eligible subcontractors regardless of business size or status. The place of performance and specific location details are not provided, indicating flexibility in where the work may be conducted as long as contractual standards are met. The contract does not include a point of contact or detailed address information, and all further inquiries or submissions must proceed through the official SAM.gov portal link provided.

Ut DLA Aviation At Ogden

POSTED

DEADLINE

High-Strength Wire Rope Manufacturing and SupplyThe contract calls for the manufacture and delivery of five units of high-strength wire rope meeting stringent military specifications, specifically NSN 4010-01-274-2973 and DLA technical standards, ensuring the product adheres to defense-grade performance and durability requirements. The work is to be performed under a subcontract arrangement with a response deadline of July 28, 2026, following a posting date of July 20, 2026. The North American Industry Classification System code 332430 identifies the relevant industrial category, indicating the focus on wire and cable manufacturing. Performance of the contract is mandated to occur at Tinker Air Force Base, with a specified zip code of 73145-9031, indicating the primary delivery and logistics location. The contract is managed under the ASC Commodities Division of the Department of Defense, and all deliverables must satisfy the exacting technical and quality benchmarks established for military-grade wire rope systems.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

in about 22 hours

Reconditioned 55-Gallon Open-Top Steel Drum SupplyThe contract entails the supply of reconditioned 55-gallon open-top steel drums specifically certified to meet UN/DOT standards for the packaging and transportation of hazardous waste. These drums are critical for compliant and safe handling of regulated materials and must adhere strictly to federal hazardous materials regulations. The procurement is structured as a subcontract under the Defense Logistics Agency, operating within the Department of Defense, and is classified under NAICS code 332430, indicating the manufacturing of metal tanks and drums. Performance of the contract is not tied to a specific geographic location, allowing flexibility in fulfillment and delivery arrangements as required by federal logistics needs. The solicitation was posted in July 2026 and is accessible through the DIBBS procurement portal, providing transparency and tracking for interested parties in the defense supply chain.

Defense Logistics Agency

POSTED

DEADLINE

Reconditioned 55-Gallon Metal Drums (Closed Top) SupplyThe contract involves the supply of reconditioned 55-gallon closed-top metal drums intended for the transport of liquid or sealed waste, ensuring compliance with safety and regulatory standards for hazardous material handling. The procurement is structured as a subcontract under the NAICS code 332430, which pertains to metal can and container manufacturing, and is managed by the Defense Logistics Agency under the Department of Defense. The contract was posted on July 14, 2026, and the place of performance and specific delivery locations are not detailed in the provided data, but the drums must meet required specifications for durability, leak resistance, and suitability for military or defense-related waste transport. The contract award reference is linked through the DIBBS system, indicating it is part of a broader defense supply chain managed through federal contracting channels.

Defense Logistics Agency

POSTED

DEADLINE

Reconditioned 55-Gallon Metal Drums (Open Top) SupplyThe contract involves the supply of reconditioned 55-gallon open-top metal drums intended for industrial waste containment, under a subcontract awarded by the Defense Logistics Agency on behalf of the Department of Defense. The NAICS code 332430 identifies the industry as metal container manufacturing, indicating the drums are produced or restored to meet specific industrial standards for durability and safety. The reconditioned nature of the drums suggests they have been previously used, professionally restored, and certified for reuse, ensuring cost-efficiency and environmental sustainability without compromising performance. Delivery and performance are expected to support defense-related operations, though the exact location of performance is not specified in the data provided. All contractual obligations center on meeting the technical and quality requirements for industrial waste storage, with the drums designed to handle potentially hazardous materials in secure, standardized containers. The contract is not subject to any set-aside provisions, meaning it is open to all qualified subcontractors regardless of business size or ownership classification. The solicitation was posted in July 2026, indicating a forward-looking procurement timeline with active contract management under the DLA’s supply chain infrastructure. The public-facing contract link provides access to award details, delivery records, and performance metrics for accountability and compliance purposes.

Defense Logistics Agency

POSTED

DEADLINE

Supply of 55-Gallon Reconditioned Steel Drums

Defense Logistics Agency

POSTED

DEADLINE

Military-Compliant Packaging and Labeling Services

Defense Logistics Agency

POSTED

DEADLINE

More opportunities from National Aeronautics And Space Administration → NASA Glenn Research Center

Same awarding agency

NASA Research Announcement (NRA) - Development Plan for Open Fan Flight DemonstrationNASA Glenn Research Center is soliciting proposals for the Development Plan for an Open Fan Flight Demonstration through a Full and Open Competition under solicitation number 80GRC026R0002, with a submission deadline of August 3, 2026, at 5:00 p.m. EDT. The objective is to develop a comprehensive plan that defines the requirements, scope, and feasibility of an open-fan propulsion system for a next-generation single-aisle transport aircraft targeting fleet introduction between 2035 and 2040, with specific parameters including passenger capacity of 150–180, design range of 3,500 nautical miles, cruise Mach of 0.78–0.82, and a gate span no greater than 118 feet. Proposals must include a final plan detailing investment strategies and market analysis, a roadmap for the evolution of the open fan concept toward a future vision product, and comprehensive risk documentation using a 5x5 Likelihood/Consequence scoring method that identifies the top ten risks with mitigation plans. The technical scope requires analysis of aerodynamic integration, structural impacts, noise and emissions, and propulsion reliability, and must be submitted as a single searchable, unlocked PDF with edit permissions enabled, along with a separate Excel-based Price/Cost Volume using Attachment B’s hybrid template and a Business Volume meeting Section VI requirements. Eligibility is restricted to U.S.-organized entities more than 50% owned and controlled by U.S. nationals, requiring completion of the Eligibility Certification and Supplemental Information Form, and proposers must also submit a Data Rights Assertion Table identifying the lowest segregable level of technical development and asserting rights based on private expense development. Proposals must be submitted via NASA’s EFSS Box portal, with pre-submission coordination required at least 48 hours in advance, including notification of intent to submit and a test file submission for new users. The contract includes two CLINs: CLIN 01 on a Firm Fixed Price basis and CLIN 02 on a Cost Plus Fixed Fee basis, with budget justifications required for each. Evaluation is conducted through a best-value trade-off where technical merit is significantly more important than cost, with past experience serving as a mandatory pass/fail gate—failure to demonstrate relevant experience within the last three years disqualifies a proposal. The selected contractor will be required to use the NASA BOX system for deliveries, comply with NASA-HDB

Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

DEADLINE

Technical Documentation & Training DeliveryThe contract requires the development of comprehensive operations and maintenance documentation for a vacuum chamber system and the delivery of hands-on training to up to eight NASA staff members. The documentation must detail procedures for routine operation, troubleshooting common issues, and performing preventive and corrective maintenance, ensuring NASA personnel can independently manage the system after project completion. Training sessions are to be conducted onsite at NASA Glenn Research Center in Cleveland, Ohio, with a focus on practical, real-world application to build competency and confidence in handling the equipment under various operational conditions. The contract is classified as a subcontract with a NAICS code of 541690, indicating it falls under other scientific and technical consulting services. It was posted on July 10, 2026, with responses due by August 7, 2026, and is issued under the National Aeronautics and Space Administration, specifically managed by NASA Glenn Research Center. The place of performance is fixed at Cleveland, Ohio, with no indication of remote work eligibility. The solicitation does not specify a set-aside classification, and there is no designated point of contact listed, which may require proposers to direct inquiries through the SAM.gov portal or general agency channels.

Other Scientific and Technical Consulting Services

POSTED

DEADLINE

Onsite Installation & CommissioningThe contract requires the contractor to perform final assembly, alignment, leak testing, and commissioning of a vacuum chamber system at NASA Glenn Research Center in Cleveland, Ohio, with all work conducted under government witness. The scope encompasses strict adherence to safety protocols and the completion of final acceptance documentation to ensure the system meets all technical and operational requirements. The work must be executed in full compliance with federal and agency-specific standards, and successful completion will serve as the basis for formal acceptance by NASA personnel. This subcontract is posted under NAICS code 238990 and has a response deadline of August 7, 2026, with the solicitation published on July 10, 2026. The performance location is specifically designated as NASA Glenn Research Center with a zip code of 44135, indicating the physical work site is fixed and must be performed on-site. All activities are subject to government oversight throughout the process, including inspections and documentation review, and the contractor is responsible for ensuring full compliance, proper sequencing of tasks, and timely delivery of certified acceptance records to satisfy contractual obligations.

All Other Specialty Trade Contractors

POSTED

DEADLINE

Thermal Conditioning Unit (TCU) Supply & IntegrationNASA Glenn Research Center is seeking a subcontractor to supply and integrate a Thermal Conditioning Unit capable of achieving extreme thermal conditions within a vacuum chamber. The system must include chillers, heat exchangers, advanced controls, and full PLC/SCADA integration with existing infrastructure to ensure seamless operation and monitoring. The TCU must be engineered to handle rigorous thermal cycling and maintain precise temperature control under high-vacuum environments critical for aerospace testing. Performance specifications demand high reliability, robust thermal management, and compatibility with current facility systems to support mission-critical research and development activities. The contract is posted under NAICS code 333415 for other commercial and industrial machinery and equipment manufacturing, with a response deadline of August 7, 2026. The place of performance is confirmed as Cleveland, Ohio, at the NASA Glenn Research Center facility with a zip code of 44135. This opportunity is structured as a subcontract and does not specify any set-aside provisions. Interested parties must meet technical requirements for thermal performance, control system integration, and compliance with NASA’s infrastructure standards, and submissions must be completed by the stated deadline to be considered.

Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

DEADLINE

Vacuum Chamber Shell Fabrication & AssemblyThe contract requires the fabrication and assembly of a vacuum chamber shell using either stainless steel or aluminum, with all work must adhere to ASME Boiler and Pressure Vessel Code Sections VIII, IX, and B31.3, and include full welding, non-destructive testing, and certification with the ASME 'U' Code Stamp. The project mandates compliance with NASA Glenn Research Center’s witness requirements, ensuring all manufacturing processes, inspections, and documentation meet stringent aerospace standards. The work must be performed at the designated place of performance in Cleveland, Ohio, with a zip code of 44135, and the solicitation is classified as a subcontract under NAICS code 332420, indicating a focus on metalworking and structural metal fabrication. Responses are due by August 7, 2026, with the solicitation posted on July 10, 2026, and are issued by the National Aeronautics and Space Administration.

Metal Tank (Heavy Gauge) Manufacturing

POSTED

DEADLINE

Vacuum Chamber Shell Design & EngineeringThe contract entails the mechanical design, structural analysis, and comprehensive engineering documentation for a vacuum chamber shell to meet rigid technical and regulatory standards, including ASME Boiler and Pressure Vessel Code Section VIII and NASA-specific requirements. The work requires the development of engineer-stamped calculations, detailed 3D models, and formal design reports that validate structural integrity, thermal performance, and operational safety under extreme vacuum conditions. All deliverables must align with NASA Glenn Research Center’s specifications and be optimized for the designated performance location in Cleveland, Ohio, with a zip code of 44135. This subcontract, solicited under NAICS code 541330 for engineering services, was posted on July 10, 2026, with a firm response deadline of August 7, 2026, at 4:00 PM. It is managed by the National Aeronautics and Space Administration through its Glenn Research Center and requires full compliance with federal contracting guidelines. The contractor must demonstrate proven expertise in high-vacuum systems and possess the capability to execute all tasks without external oversight, ensuring timely submission of certified engineering artifacts that support mission-critical applications.

Engineering Services

POSTED

DEADLINE

Request for Proposal Special Test Equipment (STE) Vacuum Chamber 3 (Chamber Shell, Thermal Shroud, and Thermal Conditioning Unit (TCU)NASA Glenn Research Center is soliciting proposals for the design, fabrication, and delivery of specialized test equipment consisting of one custom rectangular thermal vacuum chamber, one thermal shroud, and one thermal conditioning unit, as part of solicitation number 80GRC026R0011. This combined synopsis and solicitation follows FAR Subpart 12.6 guidelines for commercial items and does not include any set-aside provisions, making it open to all qualified vendors. The equipment is critical for simulating space environmental conditions and must meet stringent performance and reliability standards for use in aerospace research and testing. Proposals must be submitted by August 7, 2026, at 4:00 p.m. Eastern Time, with the contract expected to be awarded following a competitive evaluation process. The place of performance is at the Glenn Research Center in Cleveland, Ohio, and all delivered components must be capable of integration and operation at the designated facility. Primary point of contact for inquiries is Paige Foreman, with Eric DiLisi serving as secondary contact, both reachable via their NASA email addresses. The NAICS code 332420 indicates the procurement is targeted toward companies engaged in the manufacturing of industrial machinery and equipment.

Metal Tank (Heavy Gauge) Manufacturing

POSTED

DEADLINE

Data Rights ManagementThis contract requires comprehensive management of data rights and software restrictions for technical data and software, with a primary focus on preparing the Data Rights Assertions Table, or DRAT, to accurately document and assert ownership, usage rights, and limitations. The work involves interpreting federal acquisition regulations and government contract provisions to ensure compliance with data rights standards, particularly in contexts involving government-funded research and development. Successful performance necessitates expertise in identifying proprietary information, distinguishing between unlimited, restricted, and government purpose rights, and documenting these distinctions in a legally defensible manner. The contract is issued as a subcontract under NASA Glenn Research Center, part of the National Aeronautics and Space Administration, with a NAICS code of 541611 indicating it relates to management consulting services. The solicitation was posted on June 17, 2026, with responses due by August 3, 2026, at 9:00 PM Eastern Time. While the specific place of performance and point of contact are not specified, the work is expected to support NASA's technical initiatives, requiring close coordination to align data rights management with mission-critical software and data deliverables. There is no set-aside designation noted, meaning the opportunity is open to all qualified contractors regardless of business size or demographic status.

Administrative Management and General Management Consulting Services

POSTED

about 1 month ago

DEADLINE

Information System SecurityThe contract requires the implementation and maintenance of robust cybersecurity measures to safeguard Controlled Unclassified Information (CUI) in accordance with NIST Special Publication 800-171 standards. This includes the development, documentation, and ongoing enforcement of an Information System Security Plan (ISSP) to ensure full compliance with federal cybersecurity requirements. The work involves configuring, monitoring, and updating security controls across information systems to mitigate risks and protect sensitive data from unauthorized access, disclosure, or compromise. All activities must align with the specified security framework and be conducted in a manner that sustains continuous compliance throughout the contract period. This subcontract is issued by NASA Glenn Research Center under the National Aeronautics and Space Administration and is categorized under NAICS code 541512, which pertains to computer systems design and related services. The solicitation was posted on June 17, 2026, with a firm deadline for responses on August 3, 2026, at 9:00 PM Eastern Time. There is no set-aside type specified, and performance location details are not provided. The contract mandates adherence to federal cybersecurity protocols and expects the contractor to possess the technical expertise and institutional capability to manage CUI protection within complex information systems supporting NASA missions.

Computer Systems Design Services

POSTED

about 1 month ago

DEADLINE

Technical Documentation and ReportingThe contract titled Technical Documentation and Reporting requires the preparation of monthly progress reports, detailed technical documentation, and final deliverables that fully comply with NASA's established standards and secure sharing protocols. The work involves ensuring all outputs meet rigorous technical and security requirements set by NASA Glenn Research Center, with an emphasis on accuracy, consistency, and adherence to federal guidelines for handling sensitive information. The contractor must be capable of delivering high-quality, well-organized materials that support ongoing mission objectives and maintain compliance with NASA’s data handling and documentation frameworks. This is a subcontract opportunity with a NAICS code of 541990, indicating it falls under Other Scientific and Technical Consulting Services. The solicitation was posted on June 17, 2026, with a response deadline of August 3, 2026, at 9:00 PM Eastern Time. The place of performance and office address details are not specified, suggesting work may be performed remotely or at multiple locations as needed. All deliverables must align with NASA Glenn Research Center’s expectations for technical rigor and information security, and bidders must be prepared to demonstrate experience with federal space program documentation and secure transmission practices.

All Other Professional, Scientific, and Technical Services

POSTED

about 1 month ago

DEADLINE

Flight Demonstration PlanningNASA Glenn Research Center is seeking a subcontractor to develop comprehensive flight demonstration plans for open fan propulsion technology, focusing on detailed flight test profiles, seamless integration with the host aircraft, and coordination with aviation authorities for safe airspace usage. The work requires technical expertise in propulsion systems and flight testing to define operational parameters, safety protocols, and performance metrics that support real-world validation of open fan concepts. The contract is classified under NAICS code 541330 and is open for proposals with a submission deadline of August 3, 2026, targeting entities capable of delivering advanced aerospace demonstration planning under NASA’s research and development objectives.

Engineering Services

POSTED

about 1 month ago

DEADLINE

Ground Demonstration PlanningNASA Glenn Research Center is seeking a subcontractor to develop comprehensive ground test plans for open fan propulsion technology, focusing on detailed configurations, instrumentation setups, and robust safety protocols to support demonstration efforts. The work requires the design and documentation of test procedures that validate performance under controlled conditions, ensuring accurate data collection and operational safety during high-fidelity engine testing. The contract is classified under NAICS code 541330 and is open for proposals until August 3, 2026, with responses due by 9:00 p.m. Eastern Time. The project is part of a broader initiative to advance next-generation propulsion systems and will involve close coordination with NASA’s technical teams to meet mission objectives and regulatory standards for aerospace testing.

Engineering Services

POSTED

about 1 month ago

DEADLINE