This Subcontract opportunity from Department Of Defense was posted on October 13, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Thermal Sterilizer Printer Supplier

Closed

Federal

Submission Closed10/20/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 423450

New

SLED

Purell Soap and Hand Sanitizer SupplierThis subcontract agreement establishes a partnership to supply and deliver Purell-branded soap and hand sanitizer refills for the Birdville Independent School District. The primary objective is to maintain and replenish district-wide inventory levels using products specifically compatible with the existing Purell dispensing systems installed across various district locations. To comply with legal and regulatory requirements, the supplier must submit a Conflict of Interest Questionnaire, Form 1295, and a Pre-Service Affidavit in accordance with Texas Education Code section 22A.055. The contract is categorized under NAICS code 423450, with a response deadline set for December 15, 2026.

POSTED

DEADLINE

Supplier of Talon 3 Lightweight Folding Casualty Evacuation Transport LittersThis subcontract involves the supply of 67 Talon 3 Lightweight Folding Casualty Evacuation Transport Litters to support prime contractors on DLA Troop Support Medical Supply Chain projects. Each unit must measure 81 by 22.5 by 6 inches, weigh less than 12 pounds, and feature six handles. All equipment must strictly adhere to the Buy American Act and the DLA Master List of Technical and Quality Requirements. The selected supplier is responsible for delivering the completed and inspected litters FOB Destination to Mechanicsburg, Pennsylvania. This procurement is managed under the Department of Defense Medical Supply Chain with a NAICS code of 423450.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

Medical Equipment Supply

Parkland Health and Hospital System

POSTED

DEADLINE

Medical Parts and Supplies ProviderThis subcontract opportunity is for a Medical Parts and Supplies Provider to support prime contractors on State of Alabama Work Unit 10 projects. The selected provider will be responsible for delivering medical-grade components and healthcare equipment that strictly adhere to manufacturer specifications. To be eligible, providers must hold a manufacturer's reseller authorization and be properly registered for Alabama state and local sales, use, and lease taxes. The solicitation was posted on November 13, 2026, with a response deadline of November 18, 2026, falling under NAICS code 423450.

POSTED

DEADLINE

Supply of Short Arc Bulbs for Fisher-Micro SystemsThis subcontract involves the supply of specialized short arc bulbs designed for use with Fisher-Micro laboratory equipment. The hardware is intended for prime contractors working on projects for the State of Alabama Clinical Laboratory Services. The selected provider is responsible for delivering inspected and accepted components and may be required to provide written proof of authorization as a manufacturer's reseller. Compliance requirements include the registration and remittance of all applicable Alabama State and local sales, use, and lease taxes. The opportunity is categorized under NAICS code 423450, with a response deadline set for November 18, 2026.

Clinical Laboratory Services

POSTED

DEADLINE

LED Lighting Fixture SupplyThis subcontract agreement involves the procurement and delivery of LED lighting fixtures, lamps, housings, and drivers for projects managed by the Gwinnett County Board of Commissioners at the Dacula Branch library. The selected provider is responsible for ensuring all materials meet the project architect's specific requirements and delivering these components directly to the project site or the prime contractor's warehouse. Managed under the Gwinnett County Government in Georgia, the contract is categorized under NAICS code 423450. The solicitation was posted on November 13, 2026, with a response deadline set for December 11, 2026.

Gwinnett County Government

POSTED

DEADLINE

Supply of Bipolar Monopolar Cables and ForcepsThis subcontract involves the supply of specialized surgical instruments for prime contractors working on projects for The Shrewsbury and Telford Hospital NHS Trust. The scope of work focuses on the delivery of medical-grade bipolar and monopolar cables as well as surgical forceps, categorized under CPV 33169000. All provided equipment must be compatible with existing surgical systems and adhere to strict medical device standards. The procurement process is identified by NAICS code 423450, with the solicitation posted on November 13, 2026. Interested parties must submit their responses by the deadline of November 23, 2026, at 11:00 AM. The contract specifically covers the physical delivery of these essential surgical components to support the trust's healthcare operations.

The Shrewsbury and Telford Hospital NHS Trust

POSTED

DEADLINE

Diagnostic and Capital Equipment and Related Accessories and Services

Solicitation # Project_1658

NHS Supply Chain is establishing a National Framework Agreement for the provision of Diagnostic and Capital Equipment, including related accessories and services. The procurement is structured as an eight-year Open Framework, with the initial award covering a three-year term from April 3, 2028, to April 2, 2031. The estimated value for the first three years is approximately £4,325,783,082 excluding VAT, with a total projected value across the full eight-year duration of approximately £12,768,690,438 excluding VAT. The requirements are divided into seven specialized lots: Lot 1 covers Diagnostic Imaging and Radiology; Lot 2 focuses on Specialist Imaging Equipment; Lot 3 addresses Decontamination Capital Equipment; Lot 4 covers Radiotherapy; Lot 5 includes Endoscopic Imaging Equipment, Reusable Endoscopes, and Robotics; Lot 6 covers Internal Radiation Therapies; and Lot 7 encompasses Capital Medical Devices. The scope of work includes the supply of medical equipment and software, installation services, and repair and maintenance. Award decisions will be based on an open procedure using a weighted combination of price and quality. Financial price is weighted at 40% across most lots, with the remaining 60% allocated to quality factors such as warranty and repairs, supply chain management, training, social value, and support. To be eligible, tenderers must hold ISO 9001:2015, ISO 13485:2016, or Medical Device Single Audit Program (MDSAP) certification accredited by the United Kingdom Accreditation Service (UKAS) or an international equivalent. All submissions must be made in English via the NHS Supply Chain eTendering portal by the deadline of December 21, 2026, at 3:00pm.

Supply Chain Coordination Limited

POSTED

DEADLINE

Histology and Pathology Laboratory SuppliesThis subcontract for the Environmental Protection Agency's Tribal and Science Division Water focuses on the procurement of histology and pathology laboratory supplies. The scope of work involves providing prime contractors with specialized chemicals, laboratory consumables, and high-grade reagents, including Formalin and slides specifically designed for the preservation of maternal and neonatal rodent tissues. All provided materials must strictly adhere to EPA Quality Assurance Program standards to ensure suitability for use in Good Laboratory Practice studies. The opportunity is categorized under NAICS code 423450, with a response deadline set for November 30, 2026.

Tribal & Science Division Water

POSTED

DEADLINE

Heating System Piping and Fitting Supply

Fws Contracting Activity

POSTED

DEADLINE

Supply of Magnetic Breakaway Nurse Call CablesThis subcontract, issued by the Department of Veterans Affairs through the 247-NETWORK Contract Office, requires the supply and delivery of 300 magnetic breakaway nurse call cables for medical facility projects. The order specifies HatchMed BlackJack or equivalent cables in two configurations: 6-foot 37-pin magnetic straight to 37-pin conventional straight female, and 2-foot 37-pin right angle. All provided hardware must be compatible with Ronco nurse call systems and Hill-Rom bed fleets. The contract is designated as a total Small Business Set Aside under NAICS code 423450. All supplies must comply with the Buy American clause and be delivered via drop-shipping. The response deadline for this opportunity is November 20, 2026.

247-NETWORK Contract Office 7 (36C247)

POSTED

DEADLINE

Specialized Equipment Kit SupplierThis subcontract, designated as a total Small Business Set Aside under NAICS code 423450, requires the supply of specialized equipment kits for prime contractors supporting USMC 2D RECON BN projects. The supplier must provide two complete kits, specifying the brand, manufacturer, model, and OEM part numbers for all included equipment. All deliverables must be shipped to the Distribution Management Office at Camp Lejeune, North Carolina, with a final delivery deadline of November 23, 2026. To be eligible, the contractor must provide a valid UEI and CAGE code and ensure strict compliance with Section 889 and FAR prohibitions concerning covered defense telecommunications equipment. The contract is managed under the Department of Defense for the Commanding General.

Commanding General

POSTED

about 14 hours ago

DEADLINE

in about 1 year

AI Contract Overview

This subcontract through the Department of Defense Medical Supply Chain FSH involves the procurement and supply of two thermal sterilizer printers for prime contractors supporting DLA Troop Support. The supplier is required to provide Getinge USA Inc part numbers 61301603760 and 61301608308 or Rev B, with a strict requirement to verify hardware revisions for compatibility and ensure all units are mercury-free. To be eligible, the supplier must be an Original Equipment Manufacturer or an Authorized Distributor. The contract falls under NAICS code 423450, with the place of performance located at FPO 09591. Interested parties must respond by October 20, 2026.

General Info

Procurement of two mercury-free Getinge thermal sterilizer printers for DoD by October 2026.

Agency

Department Of Defense → MEDICAL SUPPLY CHAIIN FSH

NAICS

423450 - Medical, Dental, and Hospital Equipment and Supplies Merchant Wholesalers

Place of Performance

FPO, AE, 09591, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE2DH-27-T-0160.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

PRINTER, THERMAL, STERIL

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed

PostedOct 13

subcontract

Response DeadlineOct 20

Deadline has passed

Submission Closed

10/20/2026, 05:00:00 PM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIIN FSH

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIIN FSH

Office AddressN/A

ContactsNo contact information available

Full Description

Supplies thermal sterilizer printers for prime contractors on DLA Troop Support medical supply contracts. Procures and supplies Getinge USA Inc part numbers 61301603760 and 61301608308 (or Rev B), verifying hardware revision for compatibility and ensuring mercury-free construction. Must be an Authorized Distributor or OEM. Delivers two (2) Thermal Sterilizer Printers.