Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Third-Party Quality Assurance and Inspection Services

Open

Federal

Response Deadline11/13/2026, 10:00:00 AM MST

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract opportunity is for Third-Party Quality Assurance and Inspection Services supporting the Department of Defense DLA Weapons Support ASC. The selected provider will perform independent inspection and certification of aerospace fasteners for prime contractors, utilizing CMM and micrometers to verify material properties and dimensions against technical data packages at the point of origin. Key deliverables include inspection reports, Certificates of Conformance, and First Article Testing reports, with strict adherence to MIL-STD-129 and ASTM D3951/RP001 standards. The contract is set aside for Service-Disabled Veteran-Owned Small Businesses and is categorized under NAICS code 541380. Performance will take place at Hill AFB. To be eligible, contractors must maintain SAE AS9003 or ISO 9001 certification and meet CMMC Level 2 or NIST SP 800-171 cybersecurity requirements. Responses are due by November 13, 2026.

General Info

SDVOSB aerospace fastener quality assurance and inspection services for DoD at Hill AFB.

Agency

Department Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

NAICS

541380 - Testing Laboratories and Services

Place of Performance

HILL AFB, UT, 84056-5734, USA

Set-Aside

SDVOSBC

Documents

This scope was carved out of SPE4A7-27-T-3072.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

PIN, SPECIAL, NOSE LANDI

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 5

subcontract

Response DeadlineNov 13

Submission deadline

Response Deadline

11/13/2026, 10:00:00 AM MSTin 7 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs independent inspection and certification of aerospace fasteners for prime contractors on DLA Weapons Support ASC projects. Verifies dimensions and material properties against technical data packages at the point of origin using CMM and micrometers. Ensures compliance with MIL-STD-129 and ASTM D3951/RP001. Requires SAE AS9003 or ISO 9001 and CMMC Level 2/NIST SP 800-171. Delivers inspection reports, CoCs, and FAT reports.

Similar Contracts

Same NAICS industry code

RFQ#9783 Respirable Crystalline Silica Exposure Assessment

Solicitation # RFQ#9783

Management & Training Corporation (MTC) is soliciting bids under RFQ#9783 for a subcontracting opportunity to conduct a Respirable Crystalline Silica Exposure Assessment at the Edison Job Corps Center in Edison, New Jersey. The project requires a qualified industrial hygiene consultant to evaluate the Brick Trade training program, specifically focusing on 27 potentially exposed students and instructors involved in activities such as fire clay mixing and brick cutting. The scope of work includes performing site assessments, implementing a personal breathing-zone air sampling plan, and comparing results against OSHA permissible exposure limits and action levels. Deliverables consist of a written report, laboratory results, exposure calculations, and a prioritized corrective action plan for reducing exposures. This is a fee-for-service contract awarded on a best-value basis. Interested offerors must submit a lump sum bid, a completed supplier packet including Form W-9 and self-certification, proof of insurance, and three professional references by November 6, 2026. The solicitation is open to various small business set-asides, including VOSB, SDVOSB, WOSB, and HUBZone. Awardees must comply with Service Contract Labor Standards for Middlesex County, New Jersey, and adhere to strict federal guidelines regarding the protection of sensitive information and the Buy American Act. First-tier subcontractors with contracts exceeding 45,000 dollars must also provide disclosures regarding government debarment or suspension.

Edison Job Corps

POSTED

about 7 hours ago

DEADLINE

in about 14 hours

Emergency Final Cost Air Qual Test Z0320 Rochelle

Solicitation # B-54783

Solicitation B-54783 is an emergency procurement issued by the State of Illinois under the Property Management agency, specifically the BOPM41640 office. The contract is titled Emergency Final Cost Air Qual Test Z0320 Rochelle, indicating a requirement for air quality testing services located in Rochelle, Illinois. The solicitation was posted on November 5, 2026, with a response deadline set for November 24, 2026. The procurement process is managed by Scott Eldridge and Gina Jacaway, who serve as the Purchaser and State Purchasing Officer, respectively. While the solicitation is active, specific details regarding the statement of work, pricing, evaluation factors, and contract clauses are not currently detailed in the provided documentation. Interested parties can access further information through the Illinois BidBuy portal.

BOPM41640 - Property Management

POSTED

about 8 hours ago

DEADLINE

Geotechnical Laboratory TestingThis subcontract for Geotechnical Laboratory Testing involves providing specialized analysis of soil and rock samples for prime contractors working on University of Connecticut facility projects. The scope of work focuses on evaluating physical and mechanical properties, specifically shear strength, plasticity, and consolidation, ensuring all procedures adhere to ASTM International standards. The selected provider will be responsible for delivering comprehensive laboratory test results and detailed data sheets. Managed by DAS Procurement for the state of Connecticut, this opportunity falls under NAICS code 541380. The solicitation was posted on November 5, 2026, with a response deadline set for December 8, 2026. Interested parties can find further information through the CTSource Bid Board.

DAS Procurement

POSTED

about 9 hours ago

DEADLINE

in about 1 month

Construction Inspection and Quality AssuranceThis subcontract for Construction Inspection and Quality Assurance involves providing site inspection and material testing services for prime contractors working on South Dakota Department of Game, Fish and Parks projects. The primary focus is conducting quality assurance for soil, steel, and concrete during the construction of a fish barrier. To ensure technical accuracy and safety, the contract requires that all work be performed by certified construction inspectors under the oversight of a Professional Engineer. The selected provider is responsible for delivering detailed inspection reports and formal certifications confirming that the construction complies with all design plans. This opportunity is issued by the South Dakota State Government under NAICS code 541380. Interested parties must submit their responses by the deadline of December 17, 2026.

South Dakota State Government

POSTED

about 11 hours ago

DEADLINE

in about 1 month

Geotechnical and Subsurface Investigation ServicesThis subcontract for Geotechnical and Subsurface Investigation Services supports the Telfair Wheeler Airport Authority in Georgia. The scope of work involves performing subsurface explorations and detailed soil analysis to assist prime contractors with critical infrastructure projects, specifically focusing on runway rehabilitation and the construction of new hangars. The selected provider will be responsible for conducting soil borings and delivering comprehensive geotechnical engineering reports. These deliverables must include professional soil stability recommendations to ensure the structural integrity of the airport improvements. The solicitation was posted on November 5, 2026, with a response deadline of December 7, 2026, falling under NAICS code 541380.

Telfair Wheeler Airport Authority

POSTED

about 12 hours ago

DEADLINE

in about 1 month

Accredited Environmental Testing LaboratoryThis subcontract opportunity, managed by DAS Procurement for the State of Connecticut, seeks an accredited environmental testing laboratory to provide analytical services for prime contractors working on Colchester Housing Authority residential projects. The selected provider will be responsible for performing laboratory analysis on samples for mold, lead, radon, asbestos, and PCBs, ensuring all results are delivered as certified reports. To qualify, the laboratory must maintain specific accreditations required by federal guidelines and the State of Connecticut for chemical and biological analysis. Interested parties should note the response deadline of November 19, 2026, and refer to NAICS code 541380 for the scope of work.

DAS Procurement

POSTED

about 13 hours ago

DEADLINE

Third-Party Source Inspection and Quality CertificationThis subcontract for Third-Party Source Inspection and Quality Certification supports prime contractors on DLA Weapons Support ASC projects. The selected provider will perform source inspections and quality verification at manufacturer facilities, utilizing precision measurement tools to ensure strict compliance with MS35764H and MIL-DTL-45912C standards. Additionally, the contractor is responsible for validating SAE AS9003/ISO 9001 systems and ensuring packaging meets MIL-STD-2073-1E, MIL-STD-129, and MIL-STD-130N requirements, culminating in the delivery of signed inspection reports and quality certifications. Managed by the Department of Defense under NAICS code 541380, the performance of this contract is centered in Tracy, California. The solicitation was posted on November 5, 2026, with a response deadline of November 13, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 13 hours ago

DEADLINE

First Article Testing (FAT) and Quality ValidationThis subcontract for the DLA Weapons Support Active Devices Division involves performing First Article Testing and quality validation for prime contractors. The scope of work requires validating manufactured units against TDP Rev A Gen 1 and verifying zero-based sampling results in accordance with MIL-STD-1916 or ASQ H1331. To ensure full compliance with QAP 16236, the provider must utilize precision metrology and electrical testing equipment, ultimately delivering a certified First Article Test Report. The project is categorized under NAICS code 541380 and will be performed in New Cumberland. Interested parties should note the response deadline of November 16, 2026, for this Department of Defense requirement.

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

about 13 hours ago

DEADLINE

First Article Testing and Validation ServicesThis subcontract for First Article Testing and Validation Services supports the Department of Defense through the DLA Weapons Support LSO Combat Vehicles and Armament. The project involves performing and documenting First Article Testing for prime contractors on aircraft component projects, specifically focusing on the validation of duct assemblies. The selected provider will use precision testing equipment to verify that the first production unit meets all technical drawings and government specifications, ensuring overall manufacturing process capability. The contract is designated as a Total Small Business Set-Aside under NAICS code 541380, with performance taking place in New Cumberland. The primary deliverables include a certified First Article Test report and the validated first production unit. Interested parties must respond by November 16, 2026.

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 13 hours ago

DEADLINE

First Article Test (FAT) Validation ServicesThis subcontract for First Article Test Validation Services supports prime contractors delivering for the DLA Weapons Support Land Supply Chain. The selected provider is responsible for producing and delivering three FAT units of lot/item 3040/7196982 to Tinker AFB within a 120-day timeframe. The scope of work involves verifying material integrity and dimensional accuracy against the technical data package using CMM inspection equipment and metrology. The final deliverables include the three FAT units and a comprehensive validation report. To qualify for this effort, the contractor must meet strict cybersecurity standards, specifically CMMC Level 2 and NIST SP 800-171 compliance. Performance will take place at Hill AFB under NAICS code 541380.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 13 hours ago

DEADLINE

Precision Component Inspection ServicesThe Precision Component Inspection Services subcontract involves providing destination-level quality assurance for prime contractors supporting the DLA Weapons Support Fluid Handling Division. Based at Tinker AFB, the selected provider will be responsible for conducting blow-through air tests to clear internal passages of obstructions and performing rigorous visual inspections of all internal and external passages using high-magnification tools. The primary objective is to verify that all components comply with the technical and quality requirements specified in the DLA Master List. To complete the scope of work, the contractor must deliver a formal inspection report and certification for the processed items. This requirement falls under NAICS code 541380 and is managed by the Department of Defense.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 13 hours ago

DEADLINE

Dimensional Inspection and Certification ServicesThis subcontract for Dimensional Inspection and Certification Services supports prime contractors delivering DLA supply contracts through the Department of Defense. The scope of work involves performing dimensional conformance testing on 3,729 units, specifically inspecting Class 3A and 3B threads according to FED-STD-H28/20 and verifying identification markings per MIL-STD-130N. All work must be performed using precision gauging and thread measurement tools calibrated to federal standards. The service provider is required to maintain a quality management system certified under ISO 9001 or SAE AS9003. Key deliverables include detailed inspection reports and certifications of conformance. Performance will take place at Hill AFB, and the solicitation is categorized under NAICS code 541380.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 13 hours ago

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

Same awarding agency

Supply of BACC10AC-396 Grooved Clamp CouplingsThis subcontract involves the supply of 25 engineering critical Grooved Clamp Couplings, part number BACC10AC-396, sourced from CAGE code 54646. The materials are intended for prime contractors fulfilling DLA supply contracts for Tinker AFB, with delivery terms set as FOB Origin. All items must be packaged and palletized in strict accordance with ASTM D3951, MIL-STD-129, and RP001 standards. To ensure quality and regulatory compliance, the provider must maintain SAE AS9003 or ISO 9001 quality systems. Additionally, certification through the US/Canada Joint Certification Program is required to meet ITAR and EAR compliance mandates. The procurement is managed under NAICS code 423840 for the Department of Defense, specifically the DLA Weapons Support ASC Supplier Oper AE and AF Div.

Industrial Supplies Merchant Wholesalers

POSTED

about 13 hours ago

DEADLINE

Aerospace Surface Treatment and Finishing ServicesThe Aerospace Surface Treatment and Finishing Services subcontract involves providing specialized plating and surface treatments for brackets on DLA Weapons Support ASC projects. The contractor is responsible for applying finishes in accordance with MIL-STD-1949, MIL-STD-130, or MIL-STD-2219 as specified in the Technical Data Package for critical application items. Performance of these services will take place at Robins Air Force Base. To be eligible, the provider must maintain SAE AS9003 or ISO 9001 certification and ensure full ITAR and EAR compliance for the handling of controlled parts. This opportunity is managed by the Department of Defense under NAICS code 332813, with a response deadline set for November 13, 2026.

Electroplating, Plating, Polishing, Anodizing, and Coloring

POSTED

about 13 hours ago

DEADLINE

Supply of Certified Aerospace Grade Raw MaterialsThis subcontract involves the supply of certified aerospace grade raw metal stock or forgings to prime contractors supporting DLA Weapons Support ASC projects. The materials must strictly adhere to the alloy and temper specifications outlined in Drawing 98897 4F54373 and must be accompanied by full Mill Test Reports to ensure quality and certification. The contract mandates strict compliance with domestic sourcing regulations, specifically the Berry Amendment and the Buy American Act. Performance for this requirement is centered at Robins Air Force Base, with the procurement managed under NAICS code 327992 for the Department of Defense.

Ground or Treated Mineral and Earth Manufacturing

POSTED

about 13 hours ago

DEADLINE

Precision Machining and Fabrication of Toe Lock Pivot BracketsThis subcontract involves the precision machining and fabrication of 72 Toe Lock Pivot Brackets for the DLA Weapons Support ASC. The contractor must manufacture the parts according to Drawing 98897 4F54373 Rev D using subtractive methods, as additive manufacturing is strictly prohibited. The scope of work includes performing First Article Testing on two units to ensure compliance with specifications. To be eligible, the provider must hold SAE AS9003 or ISO 9001 certification, maintain CMMC Level 2 compliance, and possess ITAR/EAR approval. The project is managed under NAICS code 332710 with performance taking place at Robins Air Force Base. Interested parties must respond by November 13, 2026.

POSTED

about 13 hours ago

DEADLINE

Supply of Aerospace-Grade Raw Materials for Structural SupportsThis subcontract involves the procurement and delivery of certified aerospace-grade raw materials, specifically alloys or composites for NSN 1560012090068, to support prime contractors fulfilling DLA supply contracts. The scope of work requires the supplier to provide Mill Test Reports and material certifications to guarantee compliance with aircraft structural standards and domestic origin requirements under the Buy American/Balance of Payments Program. Managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div, the contract is categorized under NAICS code 331210. Performance will take place at Tinker AFB, with a response deadline set for November 13, 2026. The supplier is responsible for the direct delivery of all certified raw materials to the manufacturer.

Iron and Steel Pipe and Tube Manufacturing from Purchased Steel

POSTED

about 13 hours ago

DEADLINE

Manufacturing of Aircraft Structural Support Components (NSN 1560012090068)This subcontract involves the manufacture of eight aircraft structural support components under NSN 1560012090068 for the Department of Defense, specifically the DLA Weapons Support ASC Supplier OE and AF Div. The work requires the use of precision machining and forming equipment to produce components for prime contractors. Performance will take place at Tinker AFB. The contractor must adhere to strict regulatory and quality standards, including domestic origin requirements, DFARS 252.223-7008, and DLA Packaging Requirements RP001. Additionally, the provider must maintain a quality system that complies with either SAE AS9003 or ISO 9001. The response deadline for this opportunity is November 13, 2026.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 13 hours ago

DEADLINE

Supply of Machine Thread Plugs (NSN 5365-008-1611-56)This subcontract involves the manufacture and supply of 475 precision-machined thread plugs (NSN 5365-008-1611-56) for prime contractors supporting the Department of Defense, specifically the DLA Weapons Support ASC Supplier Oper AE and AF Div. All parts must be produced in strict accordance with Basic Drawing NR 10001 2533407, Revision N, with a heavy emphasis on rigorous quality control for Critical Application Items to ensure exact specification adherence. The contract mandates that all items be marked according to MIL-STD-129 and packaged in compliance with MIL-STD-2073-1E. Performance for this requirement is based in Phoenix, Arizona, under NAICS code 332710. The solicitation was posted on November 5, 2026, with a response deadline of November 13, 2026.

POSTED

about 13 hours ago

DEADLINE

MIL-SPEC Packaging and MarkingThis subcontract involves providing specialized packaging and marking services for critical aerospace components supporting prime contractors on DLA Weapons Support ASC projects. The scope of work requires the contractor to package housings using MIL-SPEC materials in accordance with ASTM D3951, apply markings and labels per MIL-STD-129, and perform palletization following RP001 DLA Packaging Requirements to ensure all items are shipment-ready. Managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div, the project is categorized under NAICS code 488410. Performance will take place in New Cumberland, Pennsylvania. The solicitation was posted on November 5, 2026, with a response deadline of November 13, 2026.

Motor Vehicle Towing

POSTED

about 13 hours ago

DEADLINE

Aerospace Coating and Surface TreatmentThis subcontract for Aerospace Coating and Surface Treatment involves providing specialized coating and surface finishing services for actuator housings on DLA Weapons Support ASC projects. The selected contractor will be responsible for applying protective or functional coatings in strict accordance with technical drawings and the DLA Master List of Technical and Quality Requirements. To qualify, providers must possess industrial plating equipment and maintain certification under SAE AS9003 or ISO 9001 quality systems. The project is managed by the Department of Defense under the DLA Weapons Support ASC Supplier OE and AF Division, with performance taking place in New Cumberland. Interested parties must respond by November 13, 2026, regarding this opportunity categorized under NAICS code 332813. The final deliverable for this engagement is the provision of finished, coated actuator housings.

Electroplating, Plating, Polishing, Anodizing, and Coloring

POSTED

about 13 hours ago

DEADLINE

Precision Machining of Actuator HousingsThis subcontract involves the precision machining of two Actuator Housings, identified by NSN 1680008025650, for prime contractors supporting DLA Weapons Support ASC projects. The work must be performed using CNC machining centers in accordance with specific technical drawings and the DLA Master List of Technical and Quality Requirements for Critical Application Items, with a strict prohibition on the use of additive manufacturing. Eligible providers must hold SAE AS9003 or ISO 9001 certification and maintain CMMC Level 2 compliance. The project falls under NAICS code 332710 and is managed by the Department of Defense. Performance will take place in New Cumberland, Pennsylvania, with a response deadline set for November 13, 2026.

POSTED

about 13 hours ago

DEADLINE

First Article Test (FAT) ValidationThis subcontract involves performing First Article Testing (FAT) for prime contractors delivering aviation parts to the Defense Logistics Agency Weapons Support ASC Supplier Oper AE and AF Division. The primary objective is to validate that initial production units meet all government specifications through the use of aerospace structural validation facilities. The selected provider will be responsible for conducting rigorous testing and providing comprehensive test reports and validation data in strict adherence to the requirements outlined in the solicitation. The final deliverables for this engagement include a validated first-article component and a formal FAT Certification report. Performance will take place at Robins Air Force Base, and the project falls under NAICS code 541330. Interested parties must respond by November 13, 2026.

Engineering Services

POSTED

about 13 hours ago

DEADLINE

Aircraft Trailing Edge Component SupplyThis subcontract, managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div, requires the supply of eight aircraft trailing edge units identified by NSN 1560004987553. The contractor is responsible for manufacturing or procuring hardware that adheres to strict technical specifications and the DLA Master List of Technical and Quality Requirements. Additionally, the provider must supply Material Safety Data Sheets for any hazardous materials and coordinate all logistics through the First Destination Transportation program. The performance of this contract will take place at Robins Air Force Base. Interested parties must adhere to the timeline established by the posting date of November 5, 2026, with a response deadline set for November 13, 2026. The procurement falls under NAICS code 336413, focusing on the delivery of critical aviation components to prime contractors.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 13 hours ago

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

First Article Testing (FAT) Specialist

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 13 hours ago

DEADLINE

Aerospace Quality Assurance & Certification

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 13 hours ago

DEADLINE

First Article Testing (FAT) for Sensitive Switches

DLA WEAPONS SUPPORT ELECTRICAL DEVICES DIV

POSTED

about 13 hours ago

DEADLINE

Electrical Cable Testing and Certification Laboratory

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 13 hours ago

DEADLINE

Third-Party Quality Assurance and Sampling Inspection

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 13 hours ago

DEADLINE

Aerospace NDT Inspection and Certification

Defense Logistics Agency

POSTED

about 13 hours ago

DEADLINE

Aerospace Non-Destructive Testing (NDT) & FAT Support

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 13 hours ago

DEADLINE

First Article Test (FAT) Execution

DLA WEAPONS SUPPORT ELECTRICAL DEVICES DIV

POSTED

about 13 hours ago

DEADLINE

Electrical Cable Certification and First Article Testing

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 13 hours ago

DEADLINE

First Article Testing for Vehicular Shelves

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 13 hours ago

DEADLINE

Third-Party Quality Inspection for Critical Fasteners

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 13 hours ago

DEADLINE

First Article Test (FAT) Services

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 13 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS