Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 30 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Third-Party Quality Inspection and Sampling

Active

Federal

Response Deadline10/05/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for Third-Party Quality Inspection and Sampling supports prime contractors on DLA supply contracts through the Department of Defense ASC Commodities Division. The selected provider will perform independent sampling and quality verification, utilizing electrical testing and calibration tools to ensure strict compliance with technical requirements RA001, RP001, and RQ011. The scope of work involves executing sampling plans based on MIL-STD-1916 or ASQ H1331 and establishing lot sizes according to MIL-STD-105/ASQ Z1.4. Deliverables include detailed quality inspection reports and sampling certifications. This opportunity falls under NAICS code 541380, with a response deadline of October 5, 2026.

General Info

Subcontract for DLA quality inspection and sampling services, due October 5, 2026.

Agency

Department Of Defense → ASC COMMODITIES DIVISION

NAICS

541380 - Testing Laboratories and Services

Place of Performance

USA

Set-Aside

NONE

Documents

This scope was carved out of SPE4A6-26-T-36YV.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

WATER SENSOR, ELECTRICA

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedSep 27

subcontract

Response DeadlineOct 5

Submission deadline

Response Deadline

10/05/2026, 05:00:00 PM UTCin 7 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → ASC COMMODITIES DIVISION

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → ASC COMMODITIES DIVISION

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs independent sampling and quality verification for prime contractors on DLA supply contracts. Executes sampling plans based on MIL-STD-1916 or ASQ H1331, Table 1, and sets lot sizes per MIL-STD-105/ASQ Z1.4. Verifies compliance with DLA technical requirements RA001, RP001, and RQ011 using electrical testing and calibration tools. Delivers quality inspection reports and sampling certifications.

Similar Contracts

Same NAICS industry code

First Article Test (FAT) for Hose AssemblyThis subcontract involves performing First Article Testing for hose assemblies under NSN 47200167195 to support DLA Land and Maritime fluid handling contracts. The selected provider will utilize a qualified laboratory facility to conduct pressure testing and material analysis, ensuring that manufacturing processes and products comply with all necessary specifications. The primary deliverables include the generation of detailed test reports, certifications of results, and the delivery of a certified first-article sample. This work is managed by the Department of Defense Fluid Handling Division and is to be performed in New Cumberland, Pennsylvania, with a response deadline of October 9, 2026.

FLUID HANDLING DIVISION

POSTED

about 9 hours ago

DEADLINE

First Article Testing (FAT) and Quality CertificationThis subcontract focuses on First Article Testing and Quality Certification for prime contractors under DLA Troop Support supply contracts. The scope involves validating sample units for NSN 3940-01-541-0894 by utilizing certified load-testing rigs and calibration equipment within a materials testing laboratory to ensure compliance with technical specifications. The successful contractor is responsible for developing and submitting formal test reports for government approval and delivering the final FAT Report along with the approved sample unit. The opportunity is a Total Small Business Set-Aside under NAICS code 541380, managed by the Department of Defense. Performance will take place in New Cumberland, Pennsylvania. Interested parties must respond by October 5, 2026, following the posting date of September 28, 2026.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 9 hours ago

DEADLINE

Geotechnical and Materials Testing Services for Waterline Replacement Project in Hemet, CA

Solicitation # CIP 5661

Albert A. Webb Associates (WEBB) is seeking a qualified small and disadvantaged business firm to serve as a subconsultant for the Oakland and Santa Fe Waterline Replacement project (CIP 5661) in Hemet, California. The project is funded in part by a U.S. Environmental Protection Agency (EPA) Community Grant and is estimated to span approximately 210 construction working days. The selected firm will be responsible for geotechnical and materials inspection and testing, including compaction testing for roadway subgrade, aggregate base, trench backfill, pipe bedding, and trench bottoms. Key deliverables include initial sampling, continued testing throughout construction, and a final certification memorandum signed by a professional engineer identifying any non-complying materials. The subcontract is contingent upon WEBB's selection by the City of Hemet and requires strict adherence to federal and state regulations. This includes compliance with EPA Disadvantaged Business Enterprise (DBE) requirements under 40 CFR Part 33, procurement standards under 2 CFR 200.321, and the Build America, Buy America Act. Additionally, the firm must be registered with the California Department of Industrial Relations (DIR) and comply with California prevailing wage laws. Administrative requirements include enrolling in the City's ACH electronic payment system and providing final project records in both a labeled three-ring binder and a PDF format on a USB thumb drive. Interested firms must submit a technical proposal, fee proposal, and proof of small/disadvantaged business certification.

Albert A. Webb Associates

POSTED

about 10 hours ago

DEADLINE

in about 22 hours

Rubber Testing For Electrical Safety Equipment - Professional Services Agreement

Solicitation # URQM-2025-APU RFP (CP 4.1)-0032

City of Anaheim Public Utilities Department

POSTED

about 10 hours ago

DEADLINE

High-Voltage Equipment Testing and CertificationThis subcontract for High-Voltage Equipment Testing and Certification involves providing independent testing and certification of high-voltage apparatus for prime contractors working on City of Lakeland utility projects. The scope of work includes measuring Radio Influence Voltage according to NEMA 107 and verifying dielectric strength and operational performance to ensure all equipment complies with NEC and NESC standards. The contractor will utilize specialized high-voltage testing labs and RIV measurement equipment to deliver formal certified test reports and compliance certificates. This opportunity is managed by the LE Substation Operations agency in Florida under NAICS code 541380, with a response deadline of October 27, 2026.

LE - Substation Operations

POSTED

about 11 hours ago

DEADLINE

Structural Steel Material Testing

State of Rhode Island

POSTED

about 11 hours ago

DEADLINE

Soil and Rock Laboratory TestingThis subcontract for Soil and Rock Laboratory Testing involves providing specialized analysis of soil and rock samples for prime contractors working on gravity sewer projects within the Niagara Region. The selected provider will be responsible for evaluating soil stratigraphy and properties through a variety of methods, including sieve analysis, Atterberg limits, and triaxial testing, while ensuring all in-situ testing adheres to standard geotechnical laboratory protocols. The contractor is required to deliver comprehensive laboratory test reports and detailed soil property data. Interested parties must submit their responses by October 15, 2026, for this Niagara Region agency project categorized under NAICS code 541380.

POSTED

about 13 hours ago

DEADLINE

Inspection and Testing of Aerial Devices and Ground Ladders

Solicitation # IFB 7800 MAS1013

The City of Austin is soliciting bids under IFB 7800 MAS1013 for a contractor to provide annual and as-needed inspection, testing, and certification of aerial devices and ground ladders. The scope of work covers a diverse inventory including ladder fire trucks, forklifts, aerial man lifts, bucket trucks, and approximately 7,200 linear feet of ground ladders. All services must be performed at designated City fleet service centers using mobile test equipment. The contractor is required to employ technicians certified to NDT Level II or III and must adhere to the latest industry standards, including ANSI/SAIA, ASME, OSHA, and NFPA 1932. Key deliverables include the provision of official certification stickers for compliant units, the installation of heat sensor labels for ground ladders, and a contingency plan identifying the City as a priority customer during emergencies. The contract is structured around three pricing categories: non-fire aerial apparatuses, fire department aerial apparatuses and ground ladders, and expedited services. Award criteria are based on overall low cost or a combination of factors most advantageous to the City, with preferences available for local and small businesses. Mandatory compliance requirements include the City of Austin Living Wage Program, which sets a minimum wage of 22.15 per hour, and a certification that the firm has not been adjudicated for wage theft within the last five years. Additionally, contractors must meet strict insurance requirements with an A.M. Best rating of B+VII or better and comply with Texas Government Code Chapter 2275 regarding foreign ownership restrictions. Offers are due by October 22, 2026.

POSTED

about 13 hours ago

DEADLINE

Precision Cleaning Services (Oxygen Systems)This subcontract for Precision Cleaning Services (Oxygen Systems) supports Navsup Weapon Systems Support Mech projects within the Department of Defense. The contractor is responsible for the precision cleaning and testing of components to ensure they are free of contaminants for oxygen-rich environments, specifically focusing on shipboard oxygen, helium, nitrogen, and hydrogen systems. All work must adhere to Special Clean 02-N2 (Green) protocols and comply with MIL-STD-1330 standards to deliver certified Oxygen Clean components. The project requires the use of specialized cleaning solvents and testing equipment under NAICS code 541380. Interested parties must submit their responses by October 9, 2026, at 8:30 PM.

Navsup Weapon Systems Support Mech

POSTED

about 14 hours ago

DEADLINE

RF Testing and Validation ServicesThe RF Testing and Validation Services subcontract, issued by the Department of Defense for the ALCMC ESKC agency, focuses on providing independent verification, validation, and environmental testing for prime contractors. Based in Warner Robins, the scope of work includes signal integrity analysis, anechoic chamber testing, and thermal vacuum and vibration testing conducted in accordance with MIL-STD-810. The service provider will utilize specialized vibration tables and NIST traceable calibration to ensure precision. Key deliverables for this engagement include comprehensive test reports, performance data, and validation certificates. The opportunity was posted on September 28, 2026, with a response deadline of November 30, 2026, under NAICS code 541380.

FA8507 Alcmc Eskc

POSTED

about 14 hours ago

DEADLINE

Metallurgical and Physical Analysis ServicesThis subcontract for Metallurgical and Physical Analysis Services supports Navy submarine projects through the Department of Defense, specifically under the Navsup Weapon Systems Support Mech agency. The selected provider will perform chemical and physical analysis for prime contractors, focusing on quantitative mill or industrial laboratory testing for specific items listed on drawing 4491151. The work requires the use of industrial metallurgical testing equipment and mandates a Certified Quantitative Mill or Industrial Laboratory Certification. The primary deliverable for this engagement is the submission of certified laboratory certification reports. The solicitation was posted on September 28, 2026, with a response deadline of October 26, 2026, under NAICS code 541380.

Navsup Weapon Systems Support Mech

POSTED

about 14 hours ago

DEADLINE

Construction Field Inspection Services

POSTED

about 15 hours ago

DEADLINE

in about 1 month

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

Military Aviation Component PackagingThis subcontract for Military Aviation Component Packaging involves providing specialized packaging services for prime contractors on DLA Aviation ASC projects. The scope of work requires the packaging and labeling of 131 units of aviation hardware to ensure protection during transit, strictly adhering to ASTM D3951 and RP001 DLA Packaging Requirements for Procurement. The project is managed by the Department of Defense under the ASC Commodities Division, with performance taking place in New Cumberland, Pennsylvania. All deliverables are to be provided on an FOB Origin basis. The solicitation was posted on September 28, 2026, with a response deadline of October 6, 2026, under NAICS code 488510.

Freight Transportation Arrangement

POSTED

about 9 hours ago

DEADLINE

Manufacture and Supply of Aviation Hardware (NSN 5305-01-191-0416)This subcontract with the Department of Defense ASC Commodities Division involves the manufacture and supply of 131 units of aviation hardware under NSN 5305-01-191-0416. The contractor must produce items according to the Technical Data Package, ensuring Class 3A and 3B threads are inspected per System 22 of FED-STD-H28/20 and all items are marked in accordance with MIL-STD-130N. To qualify, the provider must maintain an inspection system that complies with SAE AS9003 or ISO 9001. Final delivery requires the submission of a Certificate of Quality Compliance and DD Form 1423. Performance will take place in New Cumberland, Pennsylvania, with a response deadline of October 6, 2026.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 9 hours ago

DEADLINE

Military-Grade Packaging and Palletization Services

Packaging and Labeling Services

POSTED

about 9 hours ago

DEADLINE

Manufacture and Supply of Aviation Hardware (NSN 5306-00-834-5292)

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 9 hours ago

DEADLINE

Supply of Slotted Hexagon Nuts (NSN 5310002686076)This subcontract involves the manufacture and supply of 28 slotted hexagon nuts, identified by NSN 5310002686076 and part number AN320C7, for prime contractors supporting DLA supply contracts. The components must be compliant with NASM320 Revision 03 and adhere to strict quality and logistics standards, including marking per MIL-STD-129, packaging per RP001 and MIL-STD-2073-1E, and containment protocols defined by NAVSEA 5100-003D. The agreement is managed under the Department of Defense through the ASC Commodities Division, with the place of performance located at Tinker AFB. Delivery terms are established as FOB Origin. The procurement falls under NAICS code 332722, with a response deadline of October 6, 2026.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 9 hours ago

DEADLINE

Supply of Shear Bolts (NSN 5306015216992)This subcontract through the ASC Commodities Division of the Department of Defense involves the manufacture or sourcing of 71 shear bolts under NSN 5306015216992. The contractor must ensure all units are produced to exact military specifications and undergo rigorous quality assurance inspection and certification. To qualify, the manufacturer must maintain an inspection system that complies with SAE AS9003 or ISO 9001 tailored to SAE AS9003. The final deliverables are to be shipped to the DLA Distribution Depot Oklahoma, with the place of performance located at Tinker AFB. This requirement falls under NAICS code 332722 and is intended for prime contractors delivering to the Defense Logistics Agency.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 9 hours ago

DEADLINE

Manufacture and Supply of Cable Assemblies (PN: 7018457695)This subcontract, issued by the Department of Defense ASC Commodities Division, requires the manufacture and supply of 53 cable assemblies under part number 7018457695. The contractor must fabricate these assemblies according to technical specification RA001, utilizing sampling methods per MIL-STD-1916 or ASQ H1331 and marking standards per MIL-STD-129. All deliverables must be packaged according to MIL-STD-2073-1E and RP001, with performance taking place in Tracy, California. The opportunity is a total small business set-aside under NAICS code 335931. Compliance with the Buy American Act and the Berry Amendment is mandatory, and the contractor must provide a CMMC Level 2 self-assessment. The response deadline for this requirement is October 6, 2026.

Current-Carrying Wiring Device Manufacturing

POSTED

about 9 hours ago

DEADLINE

Spherical Plain Bearing SupplierThis subcontract through the Department of Defense ASC Commodities Division requires a supplier to manufacture or source specialized spherical plain bearings for prime contractors on DLA supply contracts. The bearings must strictly adhere to TDP Rev A Gen 3 and NSN 3120016851671, with quality control and packaging performed according to MIL-STD-2073-1E and MIL-STD-129. Performance will take place in Texarkana, Texas. Eligible providers must hold ISO 9001 or SAE AS9003 certification and demonstrate the capability to handle Covered Defense Information. The response deadline for this opportunity is October 6, 2026, under NAICS code 332510.

Hardware Manufacturing

POSTED

about 9 hours ago

DEADLINE

Supply of Electrical Insulation Sheets

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

about 9 hours ago

DEADLINE

DLA Compliant Packaging and Palletization ServicesThis subcontract for the Department of Defense, specifically the ASC Commodities Division, involves providing professional packaging and palletization services for prime contractors on Defense Logistics Agency supply contracts. The service provider is responsible for securing hardware to prevent damage during transit and ensuring all shipments are palletized in strict accordance with RP001 DLA Packaging Requirements for Procurement, utilizing approved pallets and cushioning materials. The work is to be performed at Tinker AFB, zip code 73145-8000, under NAICS code 561910. The solicitation was posted on September 28, 2026, with a response deadline of October 6, 2026. The primary objective is to deliver packaged hardware that is fully compliant and ready for immediate shipment.

Packaging and Labeling Services

POSTED

about 9 hours ago

DEADLINE

Specialized Hardware ManufacturingThis subcontract under the Department of Defense ASC Commodities Division involves the manufacture of specialized hardware items for prime contractors on Defense Logistics Agency supply contracts. The provider is responsible for fabricating parts to specific National Stock Number standards using precision machining to ensure compliance with the most current Military, Federal, or consensus non-government specifications. All production must utilize equipment capable of meeting strict material requirements and tolerances to deliver finished hardware items. The project is categorized under NAICS code 332721 and is designated for performance at Tinker AFB. Interested parties must respond by October 6, 2026, following the posting date of September 28, 2026.

Precision Turned Product Manufacturing

POSTED

about 9 hours ago

DEADLINE

Military-Grade Packaging and Marking ServicesThis subcontract for Military-Grade Packaging and Marking Services, issued by the Department of Defense ASC Commodities Division, requires the specialized packaging and marking of hardware components for prime contractors fulfilling DLA supply contracts. The service provider must ensure all components are packaged according to RP001 standards and that identification markings are applied using industrial equipment in compliance with MIL-STD-130N to ensure shipments are ready for final delivery. The project is categorized under NAICS code 488510 and will be performed in New Cumberland, Pennsylvania. Interested parties must submit their responses by the deadline of October 6, 2026, following the posting date of September 28, 2026.

Freight Transportation Arrangement

POSTED

about 9 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS