Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Third-Party Quality Inspection for Critical Safety Items (CSI)

Active

Federal

Response Deadline11/05/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract, issued by the Department of Defense under the DLA Weapons Support ASC Supplier OEM Division, requires independent inspection and certification of aerospace fasteners for prime contractors. The scope of work focuses on the dimensional inspection and material verification of wrench nuts to ensure compliance with Bell Textron specifications and Air Force Critical Safety Item standards. All evaluations must be performed using calibrated micrometers and CMM equipment, and the provider must maintain an AS9100 certified quality system to deliver the necessary inspection reports and certifications of conformance. The project is categorized under NAICS code 541380 and will be performed in New Cumberland, Pennsylvania. Interested parties must respond by November 5, 2026, regarding this requirement for specialized quality assurance services for critical aerospace components.

General Info

Agency

Department Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

NAICS

541380 - Testing Laboratories and Services

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE4A5-27-T-2061.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

NUT, PLAIN, INTERNAL WRE

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 28

subcontract

Response DeadlineNov 5

Submission deadline

Response Deadline

11/05/2026, 05:00:00 PM UTCin 8 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs independent inspection and certification of aerospace fasteners for prime contractors delivering DLA supply contracts. Conducts dimensional inspection and material verification of wrench nuts against Bell Textron specifications and Air Force Critical Safety Item standards using calibrated CMM and micrometers. Requires AS9100 certified quality system. Delivers inspection reports and certifications of conformance.

Similar Contracts

Same NAICS industry code

Construction Aggregate TestingThis subcontract for Construction Aggregate Testing, managed by the California Department of General Services, involves providing specialized testing services for aggregates used in roads, curbs, walkways, and paving on CALFIRE facility projects. The selected contractor will be responsible for performing sampling and laboratory testing, utilizing laboratory scales and sieve analysis equipment to ensure all materials align with project design documents. The primary deliverable for this engagement is the provision of detailed aggregate quality and gradation reports. The project is located in San Diego and falls under NAICS code 541380. Interested parties must submit their responses by the deadline of November 24, 2026. This opportunity is designed to support prime contractors in maintaining quality control and regulatory compliance for critical infrastructure improvements within the CALFIRE network.

California Department of General Services

POSTED

about 5 hours ago

DEADLINE

Nondestructive Testing (NDT) ServicesThis subcontract for Nondestructive Testing (NDT) Services involves performing specialized inspections on structural elements for prime contractors working on CALFIRE facility projects. The primary objective is to detect internal flaws using ultrasonic, radiographic, or magnetic particle testing equipment. The selected provider is responsible for delivering detailed NDT certification reports and comprehensive flaw analysis to ensure structural integrity. The project is managed through the California Department of General Services and will be performed in San Diego. To qualify, personnel must hold an NDT Level II certification or higher in accordance with ASNT CP-189 standards. Interested parties should note the response deadline of November 24, 2026, and the associated NAICS code 541380.

California Department of General Services

POSTED

about 5 hours ago

DEADLINE

Structural Steel, Bolting, and Welding InspectionThis subcontract opportunity, managed by the California Department of General Services, involves providing specialized visual and technical inspections for structural steel, welding, and high-strength bolting on CALFIRE facility projects located in San Diego. The selected contractor will be responsible for utilizing welding gauges and torque wrenches to ensure structural integrity, ultimately delivering detailed welding inspection reports and bolting torque logs to the prime contractor. To qualify for this engagement, personnel must hold both AWS Certified Welding Inspector and ICC Structural Steel and Welding Inspector certifications. Interested parties should note that the solicitation was posted on October 28, 2026, with a response deadline set for November 24, 2026.

California Department of General Services

POSTED

about 5 hours ago

DEADLINE

Concrete and Reinforcing Steel Special InspectionThis subcontract for Concrete and Reinforcing Steel Special Inspection involves providing specialized inspection and testing services for prime contractors on CALFIRE facility projects in San Diego. The scope of work includes inspecting reinforcing steel placement and performing concrete sampling and testing for structures such as barracks, apparatus bays, and generator buildings. Required deliverables include concrete strength reports and reinforcing steel inspection checklists, utilizing tools such as concrete cylinders, slump cones, and compression testing machines. Qualified providers must hold ICC Reinforced Concrete Special Inspector and ACI certifications to ensure compliance with project standards. This opportunity is managed through the California Department of General Services under NAICS code 541380. The response deadline for this solicitation is November 24, 2026.

California Department of General Services

POSTED

about 5 hours ago

DEADLINE

Soils Inspection and Density TestingThis subcontract, managed by the California Department of General Services, involves providing specialized soils inspection and density testing for a CALFIRE facility project, specifically a fire station replacement in Potrero, California. The selected contractor will perform both field and laboratory testing of soils to support prime contractors during critical phases of construction, including clearing, grading, and foundation preparation. All work must be conducted in accordance with ASTM D 3740 standards, utilizing nuclear gauges and laboratory soil testing apparatus to ensure structural integrity. The contractor is responsible for delivering detailed soil density test reports and comprehensive inspection logs. This opportunity falls under NAICS code 541380 and was posted on October 28, 2026, with a response deadline of November 24, 2026. While the project is located in Potrero, the place of performance is listed within San Diego.

California Department of General Services

POSTED

about 5 hours ago

DEADLINE

Environmental Analytical Testing ServicesThis subcontract for Environmental Analytical Testing Services supports prime contractors working on research and enforcement projects for the California Department of Fish & Wildlife. The scope of work involves performing specialized analytical testing on water and waste samples, specifically focusing on nutrient analysis, turbidity, BOD, COD, and low-level cleanups for pesticides, PAHs, and SVOCs. All work must be performed in accordance with EPA and SW-846 standards, and the provider is required to maintain ELAP certification to deliver Level II and Level IV analytical reports. The project is categorized under NAICS code 541380 and is designated for performance in Amador. Interested parties should note that the response deadline is November 17, 2026. This opportunity is managed through the Cal eProcure system for the state of California.

California Department of Fish & Wildlife

POSTED

about 5 hours ago

DEADLINE

MT&IS POTRERO FIRE STATION- FACILITY REPLACEMENT

Solicitation # RESD-PMDB 2026-12

The California Department of General Services, Real Estate Services Division, is soliciting professional Materials Testing and Inspection Services (MT&IS) for the replacement of the Potrero Fire Station for CALFIRE in San Diego County. The project involves the construction of a standard two-engine fire station on a site of approximately seven acres, with a total estimated construction cost of $23,587,800.00. The selected contractor will be responsible for providing all labor, equipment, and insurance for field laboratory testing, including inspections of soils, reinforcing steel, structural steel, aggregate, and concrete. All services must be managed through CIMB's Procore software and comply with LEED standards and specific technical certifications, such as ASTM D 3740 for soil testing and ASNT CP-189 for nondestructive testing. The contract is estimated to last twenty-four months, with a ten percent retention held for all progress payments. Selection is based on a two-step process involving a written Statement of Qualifications (SOQ) and oral interviews for a short list of typically three firms. Evaluation criteria focus on the experience of the firm, principals, and key personnel, as well as quality control and testing methodologies. Interested firms must submit their SOQ in PDF format via the designated DGS Box.com site by November 23, 2026. Required documentation includes Federal Form SF330, a letter of interest with a Federal Identification Number, and proof of California professional licensing and DIR registration. The final contract will be based on negotiated fixed rates for specific employee classifications and services.

California Department of General Services

POSTED

about 5 hours ago

DEADLINE

Invitation For Bid P2675010, Analytical Testing Services

Solicitation # P2675010

The California Department of Fish and Wildlife (CDFW) is seeking a contractor to provide analytical testing services to support the Office of Spill Prevention Response Laboratory Program. The primary objective is to establish contingency capacity for water quality and nutrient analysis, ensuring continuity of services during catastrophic instrument failures or providing testing capabilities not available in-house. These services support research studies with partner state agencies and enforcement actions aimed at protecting state waters and identifying pollutants that impact wildlife. The contract has a maximum value of 31,000.00 dollars, and the award will be granted to the lowest responsive and responsible bidder. Eligible contractors must possess California Environmental Laboratory Accreditation Program (ELAP) certification, particularly for wastewater and hazardous waste testing. Bidders are required to provide a Quality Assurance Manual, Method Detection Limits, and reporting limits for all parameters. The submission process requires several certifications, including the Darfur Contracting Act and the Bidder Declaration Form, with a deadline of November 16, 2026. Preferences and incentives are available for certified Small Businesses and Disabled Veteran Business Enterprises (DVBE), including a 5% bidding preference for small businesses and specific incentive rates for DVBE participation. The contractor is responsible for providing all pre-cleaned sample containers and preservatives, with these costs included in the quoted price.

California Department of Fish & Wildlife

POSTED

about 5 hours ago

DEADLINE

NDT Inspection for Cam AssemblyThis subcontract involves providing Non-Destructive Testing services for prime contractors supporting DLA Weapons Support ASC aerospace projects. The scope of work focuses on conducting structural integrity inspections of forged and machined cam assemblies utilizing ultrasonic, radiographic, or penetrant methods. All work must be performed in accordance with RQ040 NDT Accreditation Requirements, and the contractor is responsible for delivering certified inspection reports. The project is managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div, with performance taking place at Tinker AFB. Interested parties should note the response deadline of November 5, 2026, and the classification of the work under NAICS code 541380.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 10 hours ago

DEADLINE

First Article Testing and Material Certification ServicesThis subcontract opportunity is for the Department of Defense, specifically the DLA Weapons Support ASC Commodities Division, to provide independent testing and validation services for prime contractors. The selected provider will perform First Article Testing on three initial units to verify compliance with Drawing 77445 specifications using specialized metrology and materials testing equipment. The scope of work includes coordinating with a Quality Assurance Representative for point-of-origin inspections and delivering a certified First Article Test Report. The project is a total small business set-aside under NAICS code 541380 and will be performed at Tinker AFB. To be eligible, the contractor must hold ISO/IEC 17025 accreditation. Interested parties must respond by November 5, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 10 hours ago

DEADLINE

Third-Party Inspection and CertificationThis subcontract for Third-Party Inspection and Certification supports the Department of Defense at the Jacksonville Building. The selected provider will perform final inspections and quality validation for prime contractors delivering aviation lighting for the DLA. Responsibilities include conducting functional testing and dimensional inspections using CMM and electrical test equipment to ensure compliance with TDP Rev A Gen 1, culminating in the delivery of certificates of conformance and detailed inspection reports. Critical requirements for this engagement include maintaining CMMC Level 2 certification and coordinating directly with the DCMA for source inspections. The project falls under NAICS code 541380 and is based in Jacksonville, Florida. Interested parties must respond by November 9, 2026.

JACKSONVILLE BLDG

POSTED

about 10 hours ago

DEADLINE

Specialized Testing Laboratory (First Article Test)This subcontract opportunity is for a Specialized Testing Laboratory to perform First Article Testing for prime contractors supporting DLA Weapons Support Land Supplier Operations. The selected provider will be responsible for testing two units using specialized shock and impact testing rigs to verify that performance metrics align with the provided technical data package. The final deliverable for this engagement is a certified FAT Test Report. The project is managed under NAICS code 541380 and will be performed in New Cumberland. Due to the nature of the work, the contractor must have access to ITAR and EAR export-controlled data, and ISO/IEC 17025 certification is preferred. Interested parties must respond by November 9, 2026.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 10 hours ago

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

Same awarding agency

Supplier of Special Bands (P/N 3023697)This subcontract involves the sourcing and delivery of four specialized aircraft bands, specifically part number 3023697 from Pratt & Whitney Canada Corp, under NSN 2840010295271. The supplier is responsible for providing these units to prime contractors supporting procurement projects for the Department of Defense, specifically the DLA Weapons Support ASC Supplier OEM Division. All deliverables must strictly adhere to the DLA Master List of Technical and Quality Requirements and be packaged according to RP001 DLA Packaging Requirements for Procurement. The opportunity is categorized under NAICS code 423840, with a response deadline set for November 5, 2026.

Industrial Supplies Merchant Wholesalers

POSTED

about 10 hours ago

DEADLINE

Supply of Round Plain Nuts (NSN 5310-00-839-1524)This subcontract, issued by the Department of Defense under the DLA Weapons Support ASC Supplier OEM Division, requires the supply of 84 round plain nuts identified by NSN 5310008391524. The hardware must strictly adhere to the DLA Master List of Technical and Quality Requirements and be delivered via FOB Origin to Cherry Point by April 3, 2028. To be eligible, contractors must provide a valid CAGE code and UEI, and they must certify that no covered defense telecommunications equipment is used in accordance with FAR 52.204-24. The opportunity falls under NAICS code 332722, with a response deadline of November 5, 2026.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 10 hours ago

DEADLINE

Fabrication and Supply of Pump Housing Stand (P/N HS9612)This subcontract involves the fabrication and supply of one Pump Housing Stand, part number HS9612, manufactured to Hamilton Sundstrand specifications. The project supports prime contractors fulfilling DLA supply contracts for NOAA and is managed by the Department of Defense under the DLA Weapons Support ASC Supplier OEM Division. Performance of the work will take place in Lakeland, Florida. The contractor must adhere to strict quality assurance standards per MIL-STD-1916 or ASQ H1331 and follow MIL-STD-2073-1E and MIL-STD-129 for packaging. Additionally, the agreement mandates full compliance with the Buy American Act and DFARS 252.204-7012 cybersecurity requirements. The final deliverable is one completed and inspected stand.

All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 10 hours ago

DEADLINE

Supplier of Certified Raw Materials for Critical DiaphragmsThis subcontract involves the supply of certified raw materials for prime contractors supporting DLA Weapons Support ASC projects. The scope of work requires the provision of aerospace-grade alloys or elastomers that strictly adhere to the technical data requirements of NSN 1660009428088. To maintain full traceability for Navy Critical Safety Items, the supplier must provide comprehensive Mill Test Reports and Certificates of Conformance. The contract is managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper OEM Division, with the place of performance located in Cherry Point. Interested parties must respond by November 5, 2026, regarding this requirement categorized under NAICS code 326199.

All Other Plastics Product Manufacturing

POSTED

about 10 hours ago

DEADLINE

Manufacturer of Critical Safety Regulator DiaphragmsThis subcontract involves the manufacture of ten regulator diaphragms for prime contractors supporting DLA Weapons Support ASC projects. The components must be fabricated according to NSN 1660009428088 specifications and produced under a quality management system that complies with either SAE AS9100 or ISO 9001 standards. Because these are classified as Navy Identified Critical Safety Items, the contractor is required to perform zero-based sampling inspections in accordance with MIL-STD-1916 or ASQ H1331. The project is managed by the Department of Defense under the DLA Weapons Support ASC Supplier OEM Division, with the place of performance located in Cherry Point. Interested parties must adhere to the response deadline of November 5, 2026. The contract falls under NAICS code 339999 and focuses on the delivery of fully completed and inspected critical safety hardware.

All Other Miscellaneous Manufacturing

POSTED

about 10 hours ago

DEADLINE

MIL-SPEC Packaging and Marking ServicesThis subcontract for MIL-SPEC Packaging and Marking Services involves providing military-grade packaging and marking for prime contractors supporting the DLA Weapons Support ASC Supplier Oper OEM Division. The scope of work requires the execution of packaging according to MIL-STD-2073-1E and marking per MIL-STD-129, specifically utilizing preservation method 20, material 49, and wrap material GB. All activities must adhere to RP001 DLA packaging requirements for procurement. The specific deliverable consists of two manifolds that must be packed and palletized for FOB Origin shipment to DLA Distribution San Joaquin. Performance will take place in Tracy, California, under NAICS code 488510. The response deadline for this opportunity is November 5, 2026.

Freight Transportation Arrangement

POSTED

about 10 hours ago

DEADLINE

Fueling Manifold Manufacturing and SupplyThis subcontract involves the manufacture and supply of two fueling manifolds for prime contractors supporting DLA Weapons Support ASC projects. The contractor is responsible for producing or procuring General Electric part number L21783G01, which is classified as a critical application item. All deliverables must strictly adhere to GE and DLA technical specifications, with a specific prohibition on the use of mercury-containing compounds and unauthorized additive manufacturing. The project is managed under the Department of Defense and requires the contractor to complete a CMMC Level 2 self-assessment. Performance will take place in Tracy, California, under NAICS code 332996. Interested parties must respond by November 5, 2026.

Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 10 hours ago

DEADLINE

Supply of Specialized Gaskets (P/N 370119 / 370119-001)This subcontract involves the procurement of 20 specialized gasket units under NSN 5330015027465, specifically matching Hamilton Sundstrand Corporation part numbers 370119 and 370119-001. The contractor is responsible for sourcing and delivering these components to a designated Department of Defense location in Tracy, California, to support prime contractors working with the DLA Weapons Support ASC Supplier Oper OEM Division. All shipments must be packaged and marked in strict accordance with MIL-STD-129 standards. The opportunity is categorized under NAICS code 423830, with a response deadline set for November 5, 2026.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

about 10 hours ago

DEADLINE

Aerospace Surface Treatment and FinishingThis subcontract for Aerospace Surface Treatment and Finishing involves providing specialized surface treatments, plating, and anti-corrosion coatings for prime contractors supporting the DLA Weapons Support ASC Supplier OEM Division. The scope of work specifically requires the application of aerospace-grade plating or passivation to Drag Brace Nuts in accordance with technical drawings for part number 204-011-144-003. The contractor must ensure strict compliance with FED-STD-313 standards and adhere to IP025 guidelines for the packaging of hazardous materials. Final deliverables include finished nuts with verified coating thickness, with performance taking place in New Cumberland. The response deadline for this opportunity is November 5, 2026.

Electroplating, Plating, Polishing, Anodizing, and Coloring

POSTED

about 10 hours ago

DEADLINE

Aerospace Casting and Forging for Drag Brace NutThis subcontract involves the production and supply of 44 certified raw forged or cast blanks for Drag Brace Nuts, supporting prime contractors on projects for the DLA Weapons Support ASC Supplier Oper OEM Division. The scope of work requires the use of aerospace-grade alloys to perform near-net shape casting or forging specifically for part number 204-011-144-003. The selected provider must ensure strict adherence to quality standards by providing comprehensive material certification, full traceability, and Source Approval Request documentation. Performance for this Department of Defense contract will take place in New Cumberland, Pennsylvania, under NAICS code 332111.

Iron and Steel Forging

POSTED

about 10 hours ago

DEADLINE

Precision Machining of Drag Brace NutsThis subcontract involves the precision machining, threading, and finishing of 44 Drag Brace Nuts for the Department of Defense under the DLA Weapons Support ASC. The contractor is responsible for machining nut bodies to P/N 204-011-144-003 specifications, performing bare item marking according to RQ017, and executing zero-based sampling in compliance with MIL-STD-1916 or ASQ H1331. To qualify, the provider must utilize high-precision CNC lathes and maintain CMMC Level 2 and NIST SP 800-171 compliance. The work is categorized under NAICS code 332710 and will be performed in New Cumberland. The response deadline for this requirement is November 5, 2026.

POSTED

about 10 hours ago

DEADLINE

Military-Grade Packaging and Shipping ServicesThis subcontract for Military-Grade Packaging and Shipping Services involves providing specialized packaging and marking for prime contractors delivering hardware to the DLA Weapons Support ASC. The scope of work requires the application of protective wraps or sleeves to shanks and threads using military-specification materials in strict accordance with MIL-STD-2073-1E and RP001. Additionally, all marking must be executed per MIL-STD-129 to ensure hardware is properly prepared for FOB Origin shipment. The project is managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper OEM Division and will be performed in Portsmouth, zip code 03801-5000. Interested parties should note the response deadline of November 5, 2026. The contract is categorized under NAICS code 488510, focusing on the delivery of fully compliant, ready-to-ship military hardware.

Freight Transportation Arrangement

POSTED

about 10 hours ago

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

Non-Destructive Testing (NDT) and Inspection

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 10 hours ago

DEADLINE

First Article Testing (FAT) Services

DDSP NEW CUMBERLAND FACILITY

POSTED

about 10 hours ago

DEADLINE

First Article Testing (FAT) and Quality Validation

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

about 10 hours ago

DEADLINE

First Article Testing (FAT) Services for Electrical Wire

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 10 hours ago

DEADLINE

Testing and Certification Services (MIL-STD-831)

DLA DIST SAN JOAQUIN

POSTED

about 10 hours ago

DEADLINE

First Article Testing and Quality Validation

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 10 hours ago

DEADLINE

First Article Test (FAT) Services

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 10 hours ago

DEADLINE

First Article Testing (FAT) for Panel Fastener Inserts

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 10 hours ago

DEADLINE

First Article Test (FAT) Execution

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 10 hours ago

DEADLINE

First Article Testing and Validation for Aircraft Lighting

POSTED

about 10 hours ago

DEADLINE

Contractor First Article Test (CFAT) Services

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 10 hours ago

DEADLINE

First Article and Production Lot Testing (PLT) for Catapult Pins

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 10 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS