Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

This Pre-Solicitation opportunity from Department Of Defense was posted on May 14, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

This Call for solutions is for Shipboard Isolation Systems (SIS)

Closed
W911QY-26-S-SBIS-01Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

AI Contract Overview

Show more

This Call for Solutions, issued under the authority of 10 U.S.C. § 4022 and managed by the U.S. Army Contracting Command–Aberdeen Proving Ground, Natick Contracting Division, seeks innovative prototype Shipboard Isolation Systems (SIS) to provide biocontainment for patients aboard U.S. Navy vessels during biological threats. The system must maintain negative pressure of 0.01 inches water gauge (2.5 Pa), deliver 99.97% HEPA filtration at 0.3 microns, support 12 air changes per hour, and enable medical care through glove ports and utility access while adhering to strict weight constraints—no more than 200 lbs total, with no individual component exceeding 50 lbs. It must function reliably under maritime conditions, be compatible with standard disinfectants such as 9% calcium hypochlorite, and meet military packaging standards MIL-STD-2073-1 and environmental testing requirements per MIL-STD-810H, including a minimum five-year shelf life verified under ASTM F1980. The system must also comply with human engineering standards, fit through standard shipboard access points, and be designed for rapid deployment. Offerors must submit a Solution Brief of no more than 15 pages and a supporting data package, both in PDF format, by 1600 Eastern Time on May 19, 2026, to the designated government points of contact. Proposals will be evaluated based on performance as the most critical factor, followed by technical maturity and proposed cost, using a trade-off approach where superior performance can outweigh higher costs. Awards will be made via Prototype Other Transaction (OT) Agreements, with successful Phase I offerors eligible for a follow-on noncompetitive production option of up to 150 units. To qualify for production, systems must obtain FDA 510(k) clearance, comply with the Berry Amendment for U.S.-sourced materials, and provide Government Purpose Rights to all technical data, including MOSA-compliant interfaces. Compliance with all packaging, environmental, and regulatory standards is mandatory, and failure to meet performance thresholds will result in disqualification. Organizational conflicts of interest are strictly prohibited, and all communications must be directed exclusively to the designated agreements officer and specialist to avoid exclusion from the competition.

General Info

US Army seeks prototype Shipboard Isolation Systems, multiple awards, submissions due May 19, 2026.

NAICS

339113 - Surgical Appliance and Supplies Manufacturing

Place of Performance

Stafford, VA, USA

Set-Aside

NONE

Documents

9

JPM CBRN Protection Industry Day 1-1 Schedule

PDF, Low priorityindustry-day
Low

Call+for+Solutions+%28CFS%29+SIS+-+Final+DRAFT+11MAR2026...docx

DOCX

Questions+and+answers+SIS+05MAY2026.xlsx

XLSX

Questions+and+answers+SIS+13MAY2026+Updated.xlsx

XLSX

Questions+and+answers+SIS+14MAY2026+Updated.xlsx

XLSX

Questions+and+answers+SIS.xlsx

XLSX

SIS+Call+for+Solutions+%28CFS%29+05MAY2026+FINAL.pdf

PDF

SIS+FINAL+SOO+05May2026+FINAL.pdf

PDF

SOO+SIS_Final+Draft+11MAR2026..docx

DOCX

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

7 updates
PhaseClosed
Posted

Presolicitation

Notice updated

Response deadline changed from Apr 1, 2026 to Apr 8, 2026. The notice description changed.

Notice updated

Response deadline changed from Apr 8, 2026 to Apr 24, 2026. The notice description changed.

Notice updated

Notice details unchanged. Attachments may have changed.

Deadline changed

Response deadline changed from Apr 24, 2026 to May 15, 2026.

Notice updated

Response deadline changed from May 15, 2026 to May 19, 2026. The notice title changed. NAICS code added: 339113. The notice description changed.

Notice updated

The notice description changed.

Notice updated

The notice description changed.

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → W6QK Acc-Apg Natick
Contacts2 people available
OfficeNATICK, MA, 01760-5011, USA
Office AddressNATICK, MA, 01760-5011, USA
Contacts
Christine Halamoutis
Peter W. Stahley

Full Description

Show more

This Call for solutions is associated with the Army's Open Solicitation, W9128Z-25-S-A002. Please see the referenced link for more information. (https://sam.gov/opp/476c4481dc56499c9b1d9c6a9ce745a9/view).


Call for Solutions (CFS) Number: W911QY-26-S-SBIS-01


Issuing Office: U.S. Army Contracting Command-Aberdeen Proving Ground (ACC-APG), Natick Contracting Division (NCD)


Draft Date Issued: March 11, 2026


New Question and answers are highlighted


Shipboard Isolation System (SIS)


This Call for Solutions (CFS) is issued under the authority of 10 U.S.C. § 4022, “Authority of the Department of Defense to carry out certain prototype projects,” against the Army Open Solicitation (AOS) W9128Z-25-S-A002.



The Government intends to award multiple Prototype Other Transaction (OT) Agreements to the offerors whose Solution Briefs are determined to be most advantageous to the Government based on the evaluation criteria outlined in Section D.



This CFS invites interested parties to submit a “Solution Brief” for a prototype SIS.


The draft details can be found in Attachments: Call for Solutions (CFS) SIS - Final DRAFT 11MAR2026.. and SOO SIS_Final Draft 11MAR2026.


Inquiries and Questions


  1. All inquiries must be submitted via email to both POCs NLT 1700 Eastern Time on  08 May 2026.
  2. Each Offeror shall submit only one consolidated set of questions. Questions received after the deadline may not be answered.
  3. If an Offeror identifies a potential error, omission, or other issue in the drafft Call for Solutions, the Offeror must notify the Government POCs in writing during the question period. The notification must include supporting rationale and any recommended remedies for the Government's consideration.
  4. Communication Protocol - All communications concerning this competition shall be in writing and directed exclusively to the Government POCs identified below. 
  5. Unauthorized contact with other Government personnel regarding this competition may constitute an Organizational Conflict of Interest (OCI) and result in the Offeror's exclusion from the competition.

Agreements Officer: Peter Stahley (email: contact@example.gov)


Agreements Specialist: Christine Halamoutis (email; contact@example.gov)


Updated April 1, 2026


The government plans to post Questions and Answers (Q&A) that have been received for SIS by April 7, 20226. The draft CFS and SOO will be updated to remove "draft" and a final CFS due date will be posted. 


Updated April 8, 2026


Questions and Answers (Q&A) will be provided in the Q&A attachment


The draft CFS and SOO have not been finalized, once they have been, they will be posted and marked as final.


Updated May 5, 2026


The draft has been removed from this CFS and SOO, this is the finalized request for solution briiefs. The previously posted Q&A's has been updated and included as an attachment to this call. 


This CFS invites interested parties to submit a “Solution Brief” for a prototype SIS.


The details can be found in Attachments: Call for Solutions (CFS) SIS - Final  05MAY2026.. and SOO SIS_Final 05MAY2026.


Inquiries and Questions


  1. All inquiries must be submitted via email to both POCs NLT 1700 Eastern Time on  08 May 2026.
  2. Each Offeror shall submit only one consolidated set of questions. Questions received after the deadline may not be answered.
  3. If an Offeror identifies a potential error, omission, or other issue in the drafft Call for Solutions, the Offeror must notify the Government POCs in writing during the question period. The notification must include supporting rationale and any recommended remedies for the Government's consideration.
  4. Communication Protocol - All communications concerning this competition shall be in writing and directed exclusively to the Government POCs identified below. 
  5. Unauthorized contact with other Government personnel regarding this competition may constitute an Organizational Conflict of Interest (OCI) and result in the Offeror's exclusion from the competition.

Agreements Officer: Peter Stahley (email: contact@example.gov)


Agreements Specialist: Christine Halamoutis (email; contact@example.gov)


Responses are due: 19MAY20226


Updated Q&A 13MAY2026


See attachment - Updated Questions and Answers 13May2026 Attachment Newly added Q&A are highlighted


Responses are due: 19MAY20226


Updated Q&A 14MAY2026


See attachment - Updated Questions and Answers 14May2026 Attachment Newly added Q&A are highlighted


Responses are still due: 19MAY20226

More opportunities from Department Of Defense → W6QK Acc-Apg Natick

Same awarding agency

NAICS: 313210
New
Federal
RFI - Novel or Multifunctional Fibers, Yarns, Coatings/Finishes and Fabrics for Soldier Protection and Comfort (MFFYF)
Solicitation # RFINovelOrMultifunctionalFibersYarnsCoatings-FinishesandFabricsForSoldierProtectionAndComfort(MFFYF)
The US Army DEVCOM Soldier Center, in coordination with the Product Manager for Soldier Clothing and Individual Equipment, has issued this Sources Sought Announcement to identify potential sources of multifunctional fibers, yarns, fabrics, coatings, or finishes. The primary objective is to enhance the environmental protection of dismounted Warfighters by identifying materials that provide at least two functionalities, such as moisture management, thermal protection, repellency, vector protection, and flame resistance. The government is seeking both near-term solutions with a Technology Readiness Level (TRL) of 5 to 7+ for rapid integration into active Programs of Record, and far-term next-generation concepts with a TRL of 2 to 4 to inform future technology investments. All submissions must be completely PFAS-free and avoid cyclic siloxanes, silicones, and heavy metal catalysts. Respondents must provide detailed business information, including CAGE and NAICS codes, and verify compliance with the Berry Amendment. Technical submissions require comprehensive data, including GHS-compliant Safety Data Sheets and verifiable test reports adhering to standards such as ASTM D5034 for tensile strength and AATCC TM22 for water repellency. Physical samples, including specific yardage for fabrics or minimum meterage for yarns, must be submitted for destructive laboratory testing. Electronic responses, including white papers and the completed Appendix A template, are due by December 23, 2026, with physical samples to follow within six weeks. This announcement is for information gathering and planning purposes only and does not constitute a formal solicitation or a commitment to award a contract.
Broadwoven Fabric Mills

POSTED

5 days ago

DEADLINE

in about 2 months
View Details
NAICS: 541380
Federal
Chemical Nutrient Analysis Service for Combat Feeding Division (CFD)
Solicitation # W911QY-26-R-NUTRIENT-ANALYSIS
The U.S. Army Contracting Command Aberdeen Proving Ground, Natick Division, is soliciting proposals for chemical nutrient analysis services to support the Combat Feeding Division of the U.S. Army Combat Capabilities Development Command Soldier Center. The requirement involves outsourcing the nutritional analysis of food ingredients and ration components, with a primary focus on selenium, vitamin B12, and total dietary fiber, though the contractor must be capable of analyzing all analytes listed in the statement of work. This is a full and open competition under NAICS code 541380, intended to be awarded as a single Indefinite Delivery Indefinite Quantity IDIQ, Firm Fixed Price contract. The contract features a minimum guarantee of 5,000 dollars and a maximum ceiling of 25,000 dollars, with an anticipated period of performance from November 1, 2026, to October 31, 2027. Eligible offerors must be registered in the System for Award Management and maintain active ISO/IEC 17025 accreditation for the duration of the contract. All testing must utilize validated industry standard methods, such as AOAC International, USP, or AACC, and be performed using in house capacity rather than through pass through arrangements. Key deliverables include data reports submitted within 14 calendar days of sample receipt and the maintenance of a documented chain of custody. Proposals will be evaluated based on technical capability, price, and past performance, with the award going to the responsible vendor representing the Lowest Price Technically Acceptable offer. Submissions must be divided into separate technical and pricing proposals and delivered by 12:00 p.m. EST on October 29, 2026.
Testing Laboratories and Services

POSTED

12 days ago

DEADLINE

in 1 day
View Details
NAICS: 315120
Federal
Request for Information on Combat Boot Sock
Solicitation # RequestForInformationOnCombatBootSock
The U.S. Marine Corps Portfolio Acquisition Executive Marine Corps is conducting market research through a Sources Sought Announcement to identify potential manufacturers for a high-performance combat boot sock. Designed for Department of Defense personnel operating in temperatures above 20 degrees Fahrenheit, the socks must be Berry Amendment compliant domestic productions. The required design is an over-the-calf length featuring cushioning to prevent blisters, graduated compression to promote blood flow, a non-slip top cuff, arch support, and nylon reinforcement at the heel and toe. Material specifications require a minimum of 52 percent wool (25 microns or finer), 20 percent nylon, and 1 percent spandex, with a strict prohibition on cotton and rayon fibers. The socks will be required in four classes: Marine olive drab green, black, coyote 498, and undyed/natural, across sizes small through extra-large. Performance standards include strict criteria for bursting strength, dimensional stability, wicking, and colorfastness, with quality inspections following ASTM D3990 and ASQ/ANSI Z1 standards. This is currently a Request for Information for planning purposes only and does not constitute a solicitation or commitment to procure. Interested parties, including non-manufacturing suppliers with qualified domestic partners, must submit their CAGE code, business size, and NAICS information electronically to the designated points of contact by October 30, 2026, at 5:00 PM EST.
Apparel Knitting Mills

POSTED

12 days ago

DEADLINE

in 2 days
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS