This Combined Synopsis/Solicitation opportunity from Department Of Energy was posted on September 10, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Three Velocity Selectors

Closed

RFP473772Federal

Submission Closed09/17/2026, 09:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 334516

New

DIBBS

Hydraulic Fluid Contamination Analysis Kit Supplier

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

Supplier of Aircraft Cockpit Lights (NSN 6220016516453)This subcontract involves the manufacture or distribution of 41 specialized aircraft cockpit lighting units for prime contractors supporting DLA Distribution Depot Oklahoma projects. The required components are identified by NSN 6220016516453 and Hoffman Engineering part number 721-1237-1028, with performance taking place at Tinker AFB. The contract is designated as a Total Small Business Set-Aside under NAICS code 334516. All supplied units must strictly adhere to the DLA Master List technical and quality requirements as well as Buy American regulations. The response deadline for this Department of Defense opportunity is November 9, 2026.

POSTED

DEADLINE

Solicitation # SPE8E5-27-T-0357

Solicitation SPE8E5-27-T-0357 is a federal procurement issued by the DLA Troop Support Construction and Equipment office for one Wing Fold Jury Gage, identified by NSN 5220-00-922-6223 and Northrop Grumman part number 123GT10191. The requirement is not a small business set-aside. The original required delivery date is October 26, 2026, with a delivery window of five days after the award. The item must be shipped via the fastest traceable means to the DLA Receiving Officer at Naval Base Coronado in San Diego, California, with FOB terms set to destination. The contract mandates strict adherence to quality and packaging standards, requiring compliance with ASTM D3951 and MIL-STD-129 for marking and labeling, while noting that the DLA Master List of Technical and Quality Requirements takes precedence. Key regulatory requirements include the Buy American Act, DFARS cybersecurity standards for safeguarding covered defense information, and the use of the Wide Area Workflow system for electronic invoicing and payment. Inspection and acceptance will occur at the destination point. All quotes must be submitted through the DIBBS portal.

DLA RECEIVING OFFICER NAVAL BASE CORONADO BLDG

POSTED

DEADLINE

ANALYSIS KIT, HYDRAULIC

Solicitation # SPE2DH-27-T-0296

Solicitation SPE2DH-27-T-0296 is a total small business set-aside request for quotations issued by the DLA Troop Support Medical Supply Chain for the procurement of six hydraulic fluid contamination analysis kits, identified by NSN 6630001506486. The required delivery date is February 19, 2027, with a need ship date of February 14, 2027. Delivery is established as FOB Destination to DLA Distribution Jacksonville, Florida. The contract requires adherence to specific technical and quality standards, including RA001, RP001, RQ001, and RQ011 from the DLA Master List of Technical and Quality Requirements. Packaging must be commercial and utilize suitable sealed unit containers and exterior shipping containers to prevent damage. All materials must be marked according to Medical Marking Standard No. 1, which supersedes MIL-STD-129, and bar codes must comply with ISO/IEC 16388. Palletization must follow MIL-STD-147 for shipments exceeding 250 lbs or 20 cubic feet, and all wood packaging materials must be heat-treated or kiln-dried per clause 52.247-9012. Inspection and acceptance will occur at the destination. Invoicing and payment processing are to be handled electronically through the Wide Area WorkFlow system.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

TekVPI Compatible Probe Suite

National Aeronautics And Space Administration

POSTED

DEADLINE

MSO44B 4 Series Mixed Signal Oscilloscope & Software Bundle

National Aeronautics And Space Administration

POSTED

DEADLINE

Solicitation # STEC_Detection

POSTED

DEADLINE

Nitrogen Content Analysis Equipment

Solicitation # W911S227U0056

Solicitation W911S227U0056 is a Request for Quotation issued by the Department of Defense, specifically the W6QM Micc-Ft Drum, for the procurement of new nitrogen content analysis equipment. This acquisition is a Total Small Business Set-Aside under NAICS code 334516. The government is seeking a high-end titration system and associated accessories, specifically requesting Metrohm USA Inc products or equals. Key required items include a 905 Titrando high-end titrator, an 801 Stirrer, an 800 Dosino dosing system, a Touch Control 900, and standard installation services. Only new equipment is acceptable, as used or remanufactured products are strictly prohibited. The contract will be awarded to the responsible offeror whose proposal is most advantageous to the government based on price and technical evaluations. To be considered, offers of equal products must meet all salient physical, functional, and performance characteristics and include descriptive literature and model identification. Quotes must be submitted exclusively through the PIEE Solicitation module by October 29, 2026, and must include a completed Attachment 1 regarding certifications and country of origin to avoid being rejected as nonresponsive. Preferred delivery is F.O.B. destination within 30 days. Invoicing and payments will be processed electronically via Wide Area Workflow.

POSTED

DEADLINE

Pfeiffer HISCROLL 6COMFORT DN25 ISOKF and MAINS CABLE

Solicitation # 80NSSC27947905Q

NASA Shared Services Center

POSTED

DEADLINE

Hydrogen Generator for Gas Chromatography

Solicitation # PR16327481

POSTED

DEADLINE

NCSS - Bioruptor Pico Sonication Device

Solicitation # 75N98027Q00035

The National Institutes of Health Office of the Director, Office of Acquisitions, is issuing a non-competitive combined synopsis and solicitation under number 75N98027Q00035 to award a firm-fixed-price purchase order. The procurement is intended for Hologic Sales and Services, LLC to provide one Bioruptor Pico Sonication System and associated starter maintenance and consumable accessories for the National Heart, Lung, and Blood Institute Systems Biology Center. This equipment is essential for preparing chromatin for ChIP-seq and related epigenomic studies, requiring specific capabilities such as indirect sonication in closed tubes, an integrated cooling system, and the ability to process up to 12 samples of 0.65 mL or 6 samples of 1.5 mL per run. The acquisition includes the Bioruptor Pico system with an Essential Maintenance Starter Pack for one year of support, a tube holder and dock for 1.5 mL tubes, and various microtubes, along with no-charge installation and training. Delivery is required within 60 calendar days after receipt of order to Bethesda, Maryland. While this is a non-competitive notice of intent, all responsible sources may submit capability statements or quotations by November 10, 2026. Submissions must include the vendor's Unique Entity Identifier, Taxpayer Identification Number, business size certification, and proof of active registration in the System for Award Management.

National Institutes Of Health Olao

POSTED

DEADLINE

Solicitation # STEC_Media

Usda, Fsis, Oas Pcmb

POSTED

about 5 hours ago

DEADLINE

in about 1 month

AI Contract Overview

Oak Ridge National Laboratory, managed by UT-Battelle for the Department of Energy, is soliciting a fixed-price subcontract under RFP PR473772 for the design, manufacture, and delivery of three neutron velocity selector systems. The procurement includes one system for the General-Purpose Small-Angle Neutron Scattering (GP-SANS) instrument and two systems for the Biological Small-Angle Neutron Scattering (Bio-SANS) instrument, consisting of one primary and one standby unit. The scope of work encompasses the full lifecycle from fabrication and assembly to balancing and helium leak testing, with all equipment being delivered to the Oak Ridge, Tennessee site. Technical requirements specify wavelength ranges of 3-20 Å and adherence to strict material standards, including MIL-A-8625F for aluminum anodization and ASTM A380 for stainless steel. The contract will be awarded based on the Lowest Price Technically Acceptable (LPTA) criteria, requiring full compliance with the statement of work and delivery schedules. Sellers must provide detailed dimensional inspection reports and 3D CAD files in CREO or STEP format for final acceptance. The agreement incorporates extensive regulatory requirements, including NIST SP 800-171 cybersecurity standards, Buy American Act compliance, and various FAR clauses regarding integrity of unit prices and anti-kickback protections. Payment is processed via electronic funds transfer through the Ariba Network with standard net 30 terms. Offerors must provide comprehensive representations and certifications, including UEI registration via SAM.gov and disclosures regarding export controls and organizational conflicts of interest.

General Info

Fixed-price subcontract for three neutron velocity selector systems via Lowest Price Technically Acceptable.

Agency

Department Of Energy → Ornl Ut-Battelle Llc-Doe Contractor

NAICS

334516 - Analytical Laboratory Instrument Manufacturing

Place of Performance

Oak Ridge, TN, 37830, USA

Set-Aside

NONE

Documents

Attachment G: ORNL Pricing Worksheet

1 page · specifications

High

BSD-CS-2150 Terms & Conditions – Fixed Price

16 pages · contract-document

High

Exhibit 9 Technical Data BSD CS 2012-2025

3 pages · technical-data

High

NB3-EQ-30-0001-R00: Neutron Velocity Selector Systems Equipment Specification

5 pages · specifications

High

NB5-EQ-30-0001-R00 Neutron Velocity Selector System Equipment Specification

4 pages · specifications

High

ORNL Representations and Certifications - Abbreviated (BSD-CS-2260)

6 pages · reps-and-certs

High

Prime Supplemental Flowdown Document DE-AC05-00OR22725

9 pages · flowdown-clauses

High

RFP PR473772 - Velocity Selectors

14 pages · rfp

High

XGH-SW-30-0001-R00 HFIR Neutron Velocity Selector System SOW

38 pages · sow

High

B&D-CS-2005 Exhibit 2: Representation of Limited Rights Data and Restricted Computer Software

1 page · other

Low

BSD-CS-2123 Annual Representations and Certifications - International

6 pages · reps-and-certs

Low

AI Contract Breakdown

Uniform Contract Format

Timeline

PhaseClosed

PostedSep 10

Combined Synopsis

Response DeadlineSep 17

Deadline has passed

Submission Closed

09/17/2026, 09:00:00 PM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Energy → Ornl Ut-Battelle Llc-Doe Contractor

Contacts1 person available

OfficeOak Ridge, TN, 37831, USA

Organization / AgencyDepartment Of Energy → Ornl Ut-Battelle Llc-Doe Contractor

Office AddressOak Ridge, TN, 37831, USA

Contacts

Liz Turner

contact@example.gov

+1 (555) 000-0000

Full Description

The Neutron Technologies Division is in need of a Velocity Selector for NB-5, NB-3 and a Standby.

More opportunities from Department Of Energy → Ornl Ut-Battelle Llc-Doe Contractor

Same awarding agency

NAICS: 334516

New

Federal

Carl Zeiss Microscopy, LLC, SmartZoom 5, and options

Solicitation # RFQSSPR511693

Oak Ridge National Laboratory, under the Department of Energy, is soliciting firm fixed price quotations for the procurement of a Carl Zeiss Microscopy SmartZoom 5 system and associated options for the Enrichment Science and Engineering Division. The required equipment includes a SmartZoom 5 optical engine with integrated 10x zoom, a motor tiltable stand, a scanning stage, specific PlanApo objectives, a rotatable polarizer, a diffuser, a control unit with wireless peripherals, and an all-in-one control PC running Windows 11 2024 LTSC. While the requirement specifies Carl Zeiss, brand name or equal provisions apply. Award will be granted to the lowest priced, technically acceptable proposal from an authorized reseller. The seller is responsible for all packing and shipping to ensure the system arrives at the Oak Ridge, Tennessee site in undamaged, working condition, with domestic shipments handled as FOB Destination and international shipments preferred as Delivered at Place. Key deliverables include a calibration certification traceable to SI or ILAC MRA standards and documentation verifying that products match catalog specifications. The contract incorporates various FAR and DOE regulations, including strict cybersecurity standards based on NIST SP800-161 and DOE O 205.1D, as well as prohibitions on certain telecommunications equipment. Offerors must provide a lead-time, country of origin, and completed abbreviated representations and certifications by the November 6, 2026, deadline.

Analytical Laboratory Instrument Manufacturing

POSTED

DEADLINE

Fiber Coupler and PM Fiber SupplyThis subcontract, managed by Ornl Ut-Battelle Llc under the Department of Energy, involves the procurement and delivery of specialized optical components for scientific equipment projects at Oak Ridge National Laboratory. The scope of work requires the supply of one fiber coupler unit, specifically Part No. FD2, along with two meters of FC/APC polarization-maintaining fiber cabling. The project is categorized under NAICS code 322214 and will be performed in Oak Ridge, Tennessee. A critical requirement for the fulfillment of this contract is the verification of export controls. The solicitation was posted on October 27, 2026, with a response deadline set for November 4, 2026.

Fiber Can, Tube, Drum, and Similar Products Manufacturing

POSTED

DEADLINE

Dual-Stage Optical Isolator SupplyThis subcontract, managed by Ornl Ut-Battelle Llc-Doe Contractor under the Department of Energy, involves the procurement and delivery of a specific dual-stage optical isolator for laser head applications. The contractor is responsible for supplying one unit of Part No. OK-001228 to support scientific equipment projects at Oak Ridge National Laboratory. The project is categorized under NAICS code 334511 and will be performed in Oak Ridge, Tennessee. A critical requirement of this agreement is the mandatory export control verification to ensure compliance regarding Military Space Items and the Trigger List. The solicitation was posted on October 27, 2026, with a response deadline of November 4, 2026.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

DEADLINE

Specialized Laser Diode SupplyThis subcontract, issued by Ornl Ut-Battelle Llc-Doe Contractor under the Department of Energy, involves the procurement and delivery of a specialized laser diode for scientific equipment projects at Oak Ridge National Laboratory. The specific requirement is for one unit of laser diode Part No. LD-0730-0040-AR-4, intended for use in a laser head. The contractor must ensure strict compliance with regulatory screenings, specifically verifying the item's status regarding the Trigger List for nuclear applications or its classification as a Military or Space Item. The performance of this contract will take place in Oak Ridge, Tennessee, under NAICS code 334413.

Semiconductor and Related Device Manufacturing

POSTED

DEADLINE

TOPTICA DLC DL PRO Laser System SupplyThis subcontract, managed by Ornl Ut-Battelle Llc-Doe Contractor for the Department of Energy, involves the supply of a TOPTICA tunable diode laser system for scientific equipment projects at Oak Ridge National Laboratory. The scope of work requires the delivery of one complete TOPTICA DL pro laser unit paired with integrated DLC pro all-digital control electronics, as detailed in the project Bill of Materials. The contract is categorized under NAICS code 423690 and mandates strict adherence to FAR 752.204–21 regarding the safeguarding of covered contractor information systems. Performance will take place in Oak Ridge, Tennessee, with a response deadline set for November 4, 2026.

Other Electronic Parts and Equipment Merchant Wholesalers

POSTED

DEADLINE

System Sourcemeter-Dual Channel (200V) SupplierThis subcontract, issued by Ornl Ut-Battelle Llc under the Department of Energy, involves the procurement of high-precision Dual Channel System Sourcemeters (200V) and compatible power cords. These components are intended for prime contractors working on scientific equipment projects at the Oak Ridge National Laboratory in Oak Ridge, Tennessee. The supplier is responsible for delivering hardware according to a specific Bill of Materials. The contract mandates strict adherence to several regulatory and security standards, including the Buy American Act and DOE O 205.1D. To ensure supply chain integrity and the protection of Controlled Unclassified Information, the supplier must comply with NIST SP 800-161 and NIST SP 800-171. The opportunity was posted on October 27, 2026, with a response deadline of November 3, 2026, falling under NAICS code 334516.

Analytical Laboratory Instrument Manufacturing

POSTED

DEADLINE

Carl Zeiss SmartZoom 5 System SupplierThis subcontract, issued by Ornl Ut-Battelle Llc-Doe Contractor for the Department of Energy, seeks a supplier to provide a complete Carl Zeiss SmartZoom 5 optical microscopy system for prime contractors working on Oak Ridge National Laboratory projects. The required equipment includes a SmartZoom 5 Optical Engine with 10x zoom, a Stand D mot tiltable with a 24V DC power supply, and a Scanning stage D 130x100 STEP equipped with a stepper motor. To be eligible, the supplier must be an authorized reseller and ensure full compliance with the Buy American Act and NIST SP800-161 cybersecurity standards. The contract involves the delivery of one fully configured system to Oak Ridge, Tennessee. Responses to this solicitation are due by November 6, 2026.

Other Commercial Equipment Merchant Wholesalers

POSTED

DEADLINE

DLC DL PRO and Accessories

Solicitation # RFQ511301

UT-Battelle, LLC, acting as the management and operating contractor for Oak Ridge National Laboratory (ORNL), is soliciting firm fixed price quotes for the acquisition of a TOPTICA tunable diode laser (DL pro) with all-digital control electronics (DLC pro) and associated accessories. The required equipment includes a specific laser diode, a dual-stage optical isolator, and a fiber coupler unit with 2 meter FC/APC PM fiber. Award will be granted to the lowest priced, technically acceptable proposal from an authorized reseller. Proposals must be submitted via email to Procurement Officer Morgan Hale by November 4, 2026, and must include a proposed delivery schedule and a detailed section regarding any exceptions to the terms and conditions. The contract is subject to various Federal Acquisition Regulation (FAR) clauses, including Brand Name or Equal and restrictions on certain foreign purchases. Domestic shipments are required to be FOB Destination, while international shipments are preferred as Delivered at Place (DAP). On-site deliveries to ORNL must be performed by a U.S. citizen or a registered foreign national. Additionally, the seller must maintain significant insurance coverage, including 2 million dollars in annual aggregate limits for general liability, professional liability, and cyber liability. Offerors are required to be registered in the System for Award Management (SAM) and provide a Unique Entity ID.

Semiconductor and Related Device Manufacturing

POSTED

DEADLINE

Solicitation # RFQ497626

UT-Battelle, LLC, acting as the management and operating contractor for Oak Ridge National Laboratory, has issued solicitation RFQ497626 for the procurement of a dual-channel 200V sourcemeter system (Part Number 2612B) and an associated power cord (Part Number PWRKI). The requirement is managed by the Neutron Sciences Division and is categorized under NAICS code 334515. Responses are due by November 3, 2026, and the procurement is based in Oak Ridge, Tennessee. The contract incorporates extensive federal and agency-specific regulations, including FAR and DEAR clauses. Key compliance requirements include the Buy American Act for supplies exceeding the micro-purchase threshold and strict adherence to Department of Energy cybersecurity and privacy programs, specifically DOE O 205.1D and NIST SP 800-171 for protecting controlled unclassified information. Depending on the final contract value, additional regulations regarding anti-kickback procedures, veteran employment reporting, and subcontractor sales restrictions may apply. Offerors must provide a Unique Entity ID via SAM.gov and complete abbreviated representations and certifications, including socioeconomic status and lobbying disclosures.

Instrument Manufacturing for Measuring and Testing Electricity and Electrical Signals

POSTED

DEADLINE

Solicitation # RFQ511741

Oak Ridge National Laboratory, managed by UT-Battelle for the Department of Energy, is soliciting firm fixed price quotations under RFQ511741 for a compact, high-speed machining system. The requirement specifies a Datron Neo milling machine or a domestic equivalent capable of producing intricate parts within a limited workspace. Key technical specifications include a maximum width of 32 inches, a 2kW 40,000rpm spindle, a 24-tool automatic changer, and an integrated touch probe. The scope of work encompasses the delivery of the fully assembled system to the Oak Ridge, Tennessee site, as well as installation, startup assistance, and operator training. Award will be determined based on the lowest priced, technically acceptable proposal. Offerors must provide a firm fixed price quotation, a proposed delivery schedule, and completed representations and certifications regarding business size, export controls, and Buy American Act compliance. The contract is subject to strict security and operational requirements, including NIST SP 800-171 cybersecurity standards, NRTL labeling for electrical equipment, and site access restrictions requiring U.S. citizenship or approved foreign national status. Payments are issued via electronic funds transfer on Net 30 terms, with invoicing managed through the Ariba network.

Machine Tool Manufacturing

POSTED

DEADLINE

Supply of Electrical Coaxial FeedthroughsThis subcontract with Ornl Ut-Battelle Llc-Doe Contractor involves the supply of specialized electrical coaxial feedthroughs for prime contractors working on Oak Ridge National Laboratory projects. The scope of work focuses on the delivery of BNC 4-Pin components featuring grounded shields and KF40 flanges, as detailed in the Bill of Materials. Performance of the contract will take place in Oak Ridge, Tennessee. The provider must ensure strict adherence to the Buy American Act and comprehensive export control regulations, specifically 10 CFR 110 and 22 CFR 120-130. This procurement falls under NAICS code 335999, with a response deadline set for November 2, 2026.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

DEADLINE

Solicitation # RFQ501580

UT-Battelle, LLC, acting as the management and operating contractor for Oak Ridge National Laboratory (ORNL), has issued solicitation RFQ501580 for the procurement of a vacuum chamber system and associated components for the Research Accelerator Division. The required equipment includes an Ideal Vacuum Cube 6x12x12 Short Cube Modular Vacuum Chamber Advanced Development Kit, a New Edwards Dual Stage Twin Head D-Lab 10-8 Diaphragm Vacuum Pump, and various supporting hardware such as MKS Granville Phillips gauges, electrical coaxial feedthroughs, and various stainless steel and aluminum fittings. The procurement is categorized under NAICS code 334516 and is to be performed in Oak Ridge, Tennessee. The contract is subject to extensive federal and agency-specific regulations, including various FAR and DOE clauses. Key requirements include compliance with the Buy American Act for supplies exceeding 15,000 dollars, strict adherence to DOE cybersecurity and information security programs, and personnel security standards. Offerors must provide a Unique Entity ID via SAM.gov and certify their small business status. The agreement incorporates specific flowdown clauses regarding anti-kickback procedures, equal opportunity for veterans, and the protection of government interests regarding debarred contractors. Responses to the solicitation are due by November 2, 2026.

Analytical Laboratory Instrument Manufacturing

POSTED

2 days ago

DEADLINE

in 5 days

View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS