Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

TIP, CUTTING TORCH

Active
SPE8E5-26-T-4155Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This solicitation, issued by the Department of Defense through the DDSP New Cumberland Facility, calls for the procurement of 56 cutting torch tips under NSN 3433-01-192-1988. The contract is categorized under NAICS code 333992 and requires adherence to specific DLA packaging requirements and technical or quality standards as outlined in the DLA master list. Notably, there is no technical data package available for this acquisition, and the contract includes provisions for the removal of government identification from any non-accepted supplies. The procurement process is governed by specific revision controls for technical requirements based on whether the acquisition is classified as simplified or large. Interested parties must respond by the deadline of September 14, 2026, with a delivery requirement of 167 days allowed after delivery date. The place of performance is designated as New Cumberland, and the solicitation is managed under number SPE8E5-26-T-4155.

General Info

DoD seeks 56 cutting torch tips for New Cumberland by September 14, 2026.

Agency

Department Of Defense → DDSP NEW CUMBERLAND FACILITYView Agency

NAICS

333992 - Welding and Soldering Equipment ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

NONE

Documents

(1)

SPE8E5-26-T-4155 Request for Quotations

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DDSP NEW CUMBERLAND FACILITY
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → DDSP NEW CUMBERLAND FACILITY
View Agency Profile
Office AddressUSA
Contacts
Devin Duffy
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
TIP,CUTTING TORCH
TIP, CUTTING TORCH
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
TECH DATA PACKAGE AVAILABILITY
NO DATA IS AVAILABLE FOR USE IN NSN/Part Number: 3433-01-192-1988 Quantity: 56 EA Purchase Request: 7018161912QTY: 56 Delivery: 167 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 333992
New
DIBBS
ELECTRODE, WELDING
Solicitation # SPE8E6-26-T-4475
This solicitation, issued by the Department of Defense for the DDSP New Cumberland Facility, is for the procurement of 58 containers of carbon-steel welding electrodes. The required material is specified as Lincoln Electric Holdings part number ED032565, featuring a 1/8 inch diameter and 14 inch length, with each container weighing 10 pounds. This is designated as an exact product procurement, meaning only the specified manufacturer and part number are acceptable to meet government needs. The contract is governed by the DLA Master List of Technical and Quality Requirements and includes specific mandates for packaging and the removal of government identification from non-accepted supplies. The material has no shelf life requirement. Delivery is expected within 167 days after receipt of the order. The solicitation was posted on September 2, 2026, with a response deadline of September 14, 2026, under NAICS code 333992.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 6 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333992
New
DIBBS
ELECTRODE, WELDING
Solicitation # SPE8E5-26-T-4218
This contract is for the procurement of 543 welding electrodes, specifically part number 220842 from Hypertherm, Inc, under NSN 3439016289004. The agreement specifies a delivery timeframe of 167 days, with a required delivery date of January 18, 2027, and a need ship date of March 1, 2027. Shipping is set as FOB Origin, with both inspection and acceptance occurring at the destination, the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The supplier must adhere to strict technical and quality requirements, including DLA packaging standards RP001 and MIL-STD-129 for marking and labeling. Packaging must comply with TQ requirement IP025 for hazardous materials or ASTM D3951 for non-hazardous materials. Additionally, the contract incorporates guidelines for the removal of government identification from non-accepted supplies and the protection of covered defense information.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 6 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333992
New
DIBBS
ELECTRODE, WELDING
Solicitation # SPE8E5-26-T-4223
This solicitation is for the procurement of welding electrodes under contract number SPE8E5-26-T-4223 for the Department of Defense DDSP New Cumberland Facility. The requirement specifies 26 boxes of Lincoln Electric part number ED021998, featuring a diameter of 0.15625 inches and a length of 14 inches, with each box weighing 10 pounds. These are designated as exact products, meaning only the specified manufacturer and part number are acceptable to meet government needs. The contract mandates compliance with DLA master lists for technical and quality requirements, specifically referencing RA001, RP001 for packaging, and RQ011 for the removal of government identification from non-accepted supplies. There is no shelf life requirement for this material. Delivery is required within 167 days after order, and the response deadline for this solicitation is September 14, 2026.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 6 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333992
New
DIBBS
NOZZLE, WELDING
Solicitation # SPE8E5-26-T-4120
This contract is for the procurement of 477 ceramic welding nozzles, specifically identified as part number 105Z45 with a number 7 cup and C2 tapered style. The order is managed under solicitation SPE8E5-26-T-4120 for the Department of Defense, with delivery required to the DLA Distribution New Cumberland facility in Pennsylvania. The delivery timeline is set for 167 days after order, with an original required delivery date of October 14, 2026, and a need ship date of March 1, 2027. The agreement mandates strict adherence to DLA packaging requirements and MIL-STD-129 marking standards. It includes specific environmental and quality restrictions, notably the prohibition of intentionally added mercury or mercury-containing compounds in the hardware. Inspection and acceptance will occur at the destination, and the contract incorporates technical and quality requirements as specified in the DLA Master List.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 6 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333992
New
DIBBS
TIP, WELDING TORCH
Solicitation # SPE8E5-26-T-4138
This contract is for the procurement of 20 welding torch tips under solicitation number SPE8E5-26-T-4138. The items must be compatible with Victor 300 series torches and correspond to NSN 3433-00-628-7681, with specific part number references for Victor Equipment Co and National Torch Tip Co. Delivery is required within 167 days, with a need ship date of March 1, 2027, and an original required delivery date of January 30, 2027. The shipment is destined for the DLA Distribution DDSP New Cumberland Facility in Pennsylvania, with FOB origin terms. Compliance with DLA packaging requirements, MIL-STD-129 marking standards, and ASTM-D-3951-98 commercial packaging practices is mandatory. The contract specifies that all supplies must be new and unused, and any government identification must be removed from non-accepted supplies.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 6 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333992
New
DIBBS
TIP, WELDING TORCH
Solicitation # SPE8E5-26-T-4208
This contract, identified as SPE8E5-26-T-4208, is for the procurement of 45 welding torch tips, part number 0311-0485 from Victor Equipment Co. The items are identified by NSN 3433-01-423-5742 and are to be delivered to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The delivery timeline is set for 167 days after order, with a required delivery date of February 9, 2027, and a need ship date of March 1, 2027. The agreement mandates strict adherence to DLA packaging and marking standards, including MIL-STD-129 and ASTM-D-3951-98, and requires the use of new and unused unit containers. Inspection and acceptance will occur at the destination, with shipping terms set as FOB Origin. The contract also incorporates specific technical and quality requirements through the DLA Master List and includes provisions for the removal of government identification from non-accepted supplies and the handling of covered defense information.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 6 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333992
New
DIBBS
TIP, CUTTING TORCH
Solicitation # SPE8E5-26-T-4122
This contract, identified as SPE8E5-26-T-4122, is for the procurement of 136 cutting torch tips under NSN 3433-00-043-3121. The items must be compatible with Victor Series 1 cutting torches and meet specific part number requirements from Victor Equipment Company, National Torch Tip Co Inc, or Uniweld Products Inc. Delivery is set for 167 days after order, with a required delivery date of January 1, 2027, shipping FOB Origin to the DLA Distribution New Cumberland facility in Pennsylvania. The agreement mandates strict adherence to DLA packaging requirements, including RP001 and MIL-STD-129, with specific instructions for hazardous or commercial packaging based on FED-STD-313 and ASTM D3951. Technical and quality standards are governed by the DLA Master List, and the contract includes provisions for the removal of government identification from non-accepted supplies and the handling of covered defense information. Inspection and acceptance will occur at the destination.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 6 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333992
New
DIBBS
FEED ROLL KIT
Solicitation # SPE8E5-26-T-4170
This contract, identified as solicitation SPE8E5-26-T-4170, is for the procurement of 16 Feed Roll Kits, part number 376246-13, manufactured by Hobart Bros. Co. The order is associated with NSN 3431-01-353-5083 and purchase request 7018161191. Delivery is required within 167 days after order, with a required delivery date of January 15, 2027, and a need ship date of March 1, 2027. The items are to be delivered FOB Origin to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The contract mandates strict adherence to DLA packaging requirements, specifically RP001 and ASTM D3951, with marking and labeling following MIL-STD-129. Quality assurance and sampling must comply with MIL-STD-1916 or ASQ H1331, utilizing a zero-based sampling plan unless otherwise specified. Inspection and acceptance will take place at the destination. Additionally, the contract incorporates technical and quality requirements from the DLA Master List and notes that covered defense information may apply.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 6 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333992
New
DIBBS
SOLDERING-DESOLDERING
Solicitation # SPE8E5-26-T-4182
This contract is for the procurement of six soldering-desoldering stations from Automated Production Equipment Corp, specifically part numbers 0750-0002 and EX-750. The agreement specifies a delivery timeframe of 167 days, with a required delivery date of March 21, 2027, shipping FOB Origin to the DLA Distribution New Cumberland facility in Pennsylvania. The contract mandates strict adherence to DLA packaging and marking requirements, including MIL-STD-129 and ASTM-D-3951-95, and requires that items be cushioned and listed within their packaging. Additionally, the agreement prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, except for specific functional exceptions. Inspection and acceptance will occur at the destination.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 6 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333992
New
DIBBS
TIP, CUTTING TORCH
Solicitation # SPE8E5-26-T-4150
This contract is for the procurement of 111 cutting torch tips under solicitation SPE8E5-26-T-4150. The supplied tips must be compatible with Victor hand torches, specifically models ST1600C, ST1700C, ST1800C, ST1900C, STN2000C, and STN2300C. The order specifies NSN 3433-00-946-9551 and lists several approved part numbers from manufacturers including Victor Equipment Co, Uniweld Products, and Worldwide Welding. Delivery is required within 167 days, with a required delivery date of October 10, 2026, and a need ship date of March 1, 2027. The items are to be delivered FOB Origin to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. Compliance with DLA packaging requirements, MIL-STD-129 marking, and ASTM-D-3951-98 commercial packaging standards is mandatory. Additionally, the contract prohibits the intentional addition of mercury or mercury-containing compounds to the hardware.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 6 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333992
New
DIBBS
ELECTRODE, WELDING
Solicitation # SPE8E5-26-T-4125
This contract is for the procurement of welding electrodes under solicitation number SPE8E5-26-T-4125 for the Department of Defense. The requirement specifies a quantity of 62 coils, with each coil weighing 10 pounds. The material is identified by NSN 3439-00-165-4187 and corresponds to part numbers 10202900 and HAYESSTAMANG from Haynes International, Inc. Delivery is required within 167 days after order, with a need ship date of March 1, 2027, and a final required delivery date of July 26, 2027. Shipping is FOB Origin and destined for the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The contract mandates strict adherence to DLA packaging requirements, specifically RP001 and MIL-STD-129, with packaging based on whether the material is classified as hazardous under FED-STD-313. Inspection and acceptance will take place at the destination. There is no allowed variance in the quantity provided.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 6 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333992
New
DIBBS
ROD, WELDING
Solicitation # SPE8E5-26-T-4123
This solicitation, issued by the Department of Defense DDSP New Cumberland Facility under solicitation number SPE8E5-26-T-4123, is for the procurement of Class 2 welding rods. The requirement specifies 18 boxes, with each box containing 10 pounds of material. The rods must have a diameter of 0.063 inches and a length between 35.75 and 36.25 inches. Delivery is required within 167 days after the order is received. The contract is governed by specific technical and quality standards, including DLA packaging requirements and regulations regarding the removal of government identification from non-accepted supplies. It is a fully competitive procurement based on military or federal specifications. Interested parties must respond by September 14, 2026, and the performance location is designated as New Cumberland, Pennsylvania.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 6 hours ago

DEADLINE

in 12 days
View Details

More opportunities from Department Of Defense → DDSP NEW CUMBERLAND FACILITY

Same awarding agency

NAICS: 326113
New
DIBBS
PLASTIC SHEET
Solicitation # SPE8E5-26-T-4205
This contract, identified as SPE8E5-26-T-4205, is for the procurement of eight plastic sheets under National Stock Number 9330-01-550-5790, provided by Fairbanks Morse, LLC. The delivery is set for 167 days after order, with a required delivery date of February 26, 2027, shipping FOB Origin to the DLA Distribution New Cumberland facility in Pennsylvania. The agreement mandates strict adherence to DLA packaging and marking standards, including MIL-STD-2073-1E and MIL-STD-129. It specifically prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, except for specified functional exceptions. Technical and quality requirements are governed by the DLA Master List, and the contract includes provisions for the handling of covered defense information and hazardous materials.
Unlaminated Plastics Film and Sheet (except Packaging) Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333310
New
DIBBS
HEAD, WATER DEMINERALIZ
Solicitation # SPE8E8-26-T-5502
This contract, identified by solicitation number SPE8E8-26-T-5502, is for the procurement of 12 units of water demineralizer ion exchange heads, part number 7426B-01 from Howell Laboratories Inc. The items are classified under NSN 4610-01-691-0729. Delivery is required within 167 days, with a need ship date of March 1, 2027, and an original required delivery date of March 16, 2027. The agreement specifies FOB Origin shipping with inspection and acceptance occurring at the destination, specifically the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. Compliance with DLA packaging requirements, MIL-STD-2073-1E, and MIL-STD-129 marking standards is mandatory. Additionally, the contract incorporates various technical and quality requirements from the DLA Master List and notes that covered defense information potentially applies.
Commercial and Service Industry Machinery Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 12 days
View Details
NAICS: 327215
New
DIBBS
SHEET, NONMETALLIC, PROT
Solicitation # SPE8E5-26-T-4234
This contract is for the procurement of 41 units of nonmetallic protective sheets, identified by NSN 9390015570832. The order is associated with part numbers from General Dynamics Land Systems and Clear Defense LLC. Delivery is required within 167 days after order, with a required delivery date of February 24, 2027, shipping FOB Origin to the DLA Distribution New Cumberland facility in Pennsylvania. The agreement mandates strict adherence to DLA packaging requirements, specifically RP001 and MIL-STD-129 for marking and labeling. Packaging must follow ASTM D3951 for non-hazardous materials or specific TQ requirement IP025 for hazardous materials. Inspection and acceptance will take place at the destination, and the contract specifies that surplus supplies are not acceptable for this particular national stock number.
Glass Product Manufacturing Made of Purchased Glass

POSTED

about 6 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333413
New
DIBBS
FAN, CIRCULATING
Solicitation # SPE8E7-26-T-3784
This contract is for the procurement of 45 circulating fans, identified by NSN 4140-01-663-5974 and Hewlett-Packard part number 654752-001. The order is managed under solicitation SPE8E7-26-T-3784 with a required delivery date of May 18, 2027, and a need ship date of March 1, 2027. Delivery is set for 167 days after the order, with shipping terms established as FOB Origin and inspection and acceptance occurring at the destination. The supplier must adhere to specific technical and quality requirements outlined in the DLA Master List, including documentation for source approval and the removal of government identification from non-accepted supplies. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements RP001. All shipments are to be delivered to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania.
Industrial and Commercial Fan and Blower and Air Purification Equipment Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333310
New
DIBBS
HEATING ELEMENT, ELECTR
Solicitation # SPE8E8-26-T-5509
This solicitation, numbered SPE8E8-26-T-5509, is issued by the Department of Defense for the procurement of 49 electrical immersion type heating elements under NSN 4520-01-579-9647. The contract is managed by the DDSP New Cumberland Facility, with a required delivery timeframe of 47 days after receipt of order. The procurement is subject to specific technical and quality requirements as outlined in the DLA Master List, including packaging requirements under RP001 and the removal of government identification from non-accepted supplies per RQ011. Interested parties must submit responses by September 14, 2026, for performance at the New Cumberland location.
Commercial and Service Industry Machinery Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 12 days
View Details
NAICS: 315990
New
DIBBS
NOSE, RESCUE SEAT
Solicitation # SPE8E6-26-T-4444
This contract, identified as SPE8E6-26-T-4444, is for the procurement of three units of a rescue seat nose, part number K26-1083-1, manufactured by Kaman Aerospace Corp. The item is classified as a critical application item under NSN 4240010825039. Delivery is required within 167 days, with a need ship date of March 1, 2027, and an original required delivery date of June 8, 2027. The shipment is to be delivered FOB Origin to the DLA Distribution New Cumberland facility in Pennsylvania. The agreement incorporates several strict technical and quality requirements, including DLA packaging standards RP001 and MIL-STD-129 for marking and labeling. Compliance with Covered Defense Information (CDI) and Cybersecurity Maturity Model Certification (CMMC) Level 2 self-assessment is mandatory. Inspection and acceptance will take place at the destination. Packaging must adhere to ASTM D3951 unless the material is deemed hazardous, in which case requirement IP025 applies.
Apparel Accessories and Other Apparel Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 12 days
View Details
NAICS: 326299
New
DIBBS
BODY, REGULATOR, BREATHI
Solicitation # SPE8E6-26-T-4485
This solicitation is for the procurement of four units of a breathing apparatus regulator body, identified by NSN 4220-01-424-4220. The contract is issued by the Department of Defense through the Defense Logistics Agency for the New Cumberland facility, with a required delivery timeframe of 167 days after receipt of order. The contract mandates strict adherence to cybersecurity and export control regulations, requiring CMMC Level 2 certification and compliance with ITAR or EAR guidelines for the handling of technical data. Additionally, the supplier must follow DLA packaging requirements and ensure the removal of government identification from any non-accepted supplies. The material is noted to have no shelf life requirement.
All Other Rubber Product Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332321
New
DIBBS
LAMP, LIGHT EMITTING DI
Solicitation # SPE8E7-26-T-3779
This contract is for the procurement of 204 light emitting diode lamps, identified by NSN 6210016194271 and part number L-LW36 from L.C. Doane Company. The agreement is a total small business set-aside under solicitation SPE8E7-26-T-3779, with a required delivery date of January 26, 2027, and a delivery window of 110 days. Shipping is FOB origin, with inspection and acceptance occurring at the destination, specifically the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The contract mandates strict adherence to DLA packaging requirements and MIL-STD-129 marking standards. A critical environmental restriction prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, except in specific functional cases defined by NAVSEA. Technical and quality requirements are governed by the DLA Master List, and the contract includes provisions for the handling of covered defense information.
Metal Window and Door Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 12 days
View Details
NAICS: 331492
New
DIBBS
SOLDER, LEAD-TIN ALLOY
Solicitation # SPE8E5-26-T-4180
This contract, identified as SPE8E5-26-T-4180, is for the procurement of 43 pounds of lead-tin alloy solder under NSN 3439-01-420-2775. The order is associated with Alpha Metals Inc and Northrop Grumman Systems Corporation. Delivery is required within 167 days, with a need ship date of March 1, 2027, and an original required delivery date of May 25, 2027. The shipment is to be delivered FOB Origin to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The agreement includes a quantity variance of plus or minus 10 percent, with both inspection and acceptance occurring at the destination. Packaging must adhere to DLA requirements, specifically RP001 and MIL-STD-129, with hazardous materials following TQ requirement IP025 or non-hazardous materials following ASTM D3951. The contract incorporates various technical and quality requirements from the DLA Master List and specifies the removal of government identification from any non-accepted supplies.
Secondary Smelting, Refining, and Alloying of Nonferrous Metal (except Copper and Aluminum)

POSTED

about 6 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332410
New
DIBBS
RECEIVER, LIQUID REF
Solicitation # SPE8E8-26-Q-0468
This contract is for the procurement of 39 units of a liquid receiver, identified by NSN 4130-01-574-7504 and Carrier Corp part number 65-60036-02. The agreement is established as a firm fixed price contract with a delivery requirement of 90 days after order. Inspection and acceptance will occur at the destination, and the shipping terms are FOB Origin. The supplier must adhere to DLA packaging requirements, specifically ASTM D3951 and MIL-STD-129 for marking and labeling, with DLA Master List technical and quality requirements taking precedence. Delivery is designated for the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The contract also notes that covered defense information potentially applies and requires the removal of government identification from any non-accepted supplies.
Power Boiler and Heat Exchanger Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 7 days
View Details
NAICS: 339999
New
DIBBS
BALLOON, TARGET
Solicitation # SPE8E6-26-T-4477
This contract, identified as SPE8E6-26-T-4477, is a solicitation from the Department of Defense for the procurement of 21 target balloons. The items are described as yellow, tumbling, adrift balloons with nominal dimensions of 60 inches for length, height, and width. Each unit must include a 6-inch float and a 50-foot handling rope with a 1/4-inch diameter. The specific part number associated with this requirement is Killer Lemon, manufactured by Geodata Systems Management Inc. The delivery is set for 32 days after order, with a required delivery date of November 2, 2026, shipping FOB Origin to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. Compliance with DLA packaging requirements, MIL-STD-2073-1E, and MIL-STD-129 marking standards is mandatory. The contract specifies a zero percent quantity variance and designates both the inspection and acceptance points at the destination.
All Other Miscellaneous Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 12 days
View Details