Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

TIRE, PNEUMATIC, VEHI

Active
SPE7L7-26-T-4480Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract specifies the procurement of one pneumatic tire for vehicle use with NSN 2610-01-668-9864 and part number 554263 from CARLISLE TIRE & WHEEL CO. The tire is classified as TYPE I (CODE S) and must have a minimum of 42 months of shelf life remaining at the time of delivery, with a full non-extendable shelf life limit of 60 months. All items must comply with DLA packaging requirements, including MIL-STD-2073-1E for preparation and MIL-STD-129 for marking, with special marking code 32 indicating the Type I shelf-life requirement. The tire must be packaged with flaps securely rolled and retained inside using twine or nonmetallic strapping meeting A-A-228, A-A-145 1, or ASTM D3950 standards. No ozone-depleting chemicals may be used, and all packaging and marking must align with federal defense standards. Delivery is due within 20 days FOB destination, with zero tolerance for quantity variance, and inspection and acceptance occur upon arrival. Shipment must be sent via the fastest traceable means, excluding parcel post, to the designated DLA distribution center at Tinker AFB, Oklahoma. The contract is issued under solicitation SPE7L7-26-T-4480 with an original required delivery date of July 24, 2026, and applies technical and quality requirements referenced in the DLA Master List.

General Info

One pneumatic tire, NSN 2610-01-668-9864, 42+ months shelf life, DLA packaging and marking, delivery to Tinker AFB by July 24, 2026.

Agency

Department Of Defense → OKC CPView Agency

NAICS

326211 - Tire Manufacturing (except Retreading)View NAICS

Place of Performance

7330 SENTRY BLVD BLDG 469 DOOR 10, TINKER AFB, OK, 73145-8000, US

Set-Aside

NONE

Documents

(1)

SPE7L7-26-T-4480.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → OKC CP
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → OKC CP
View Agency Profile
Office AddressUS
Contacts
KURT BECKA
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
TIRE,PNEUMATIC,VEHI
TIRE,PNEUMATIC,VEHI
RS073: Shelf-life requirement RS001 for TYPE I (CODE S) tires with a shelf-life of 60-months (non-extendable) with the following exception applies to this item. Tires furnished under this contract/order shall have at least 42-months of shelf-life remaining at time of delivery.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE
USED NOR INCORPORATED IN ANY ITEMS TO BE
DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION
SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT
DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.
SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR
APPROVAL UNLESS THEY ARE AUTHORIZED BY THE
SPECIFICATION REQUIREMENTS.
ZL002
MIL-DTL-4M, 10 January 1997 3.3.2.1.4 Tires with flaps. Flaps shall be rolled and placed inside the tire. When the size of the rolled flap and normal distance between beads assure that flap will remain in place during normal handling and transportation, no tying is required. When the size of the rolled flap is such that it will not be securely held within the tire, it shall be secured within the tire using twine conforming to A-A-228 or A-A-145 1,or nonmetallic strapping conforming to ASTM D3950, in such a manner as to assure safe delivery. When it is too difficult to insert the rolled flap within the tire, it shall be secured within the tire in the normal installed position. Safe transportation shall be ensured by securing flaps within the tire using
SPE7L7-26-T-4480
SECTION B
twine conforming to A-A-228 or A-A-145 1, or nonmetallic strapping conforming to ASTM D3950.
RS023: Shelf-life requirement RS001 for a TYPE I (CODE S) item with a shelf life of 60 months (non-extendable) applies to this item.
CARLISLE TIRE & WHEEL CO 3EKG7 P/N 554263
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017641284 0001 EA 1.000
NSN/MATERIAL:2610016689864
DELIVERY (IN DAYS):0020
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:CA CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:D3 OPI:O
INTRMDTE CONT:DO INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:32 -32 Type I, shelf life
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
FB2037
FB2037 DLA DISTRIBUTION OKC
CP 405 855 3267
7330 SENTRY BLVD BLDG 469 DOOR 10
TINKER AFB OK 73145-8000
US
RDD 777 SHIPMENT. SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
FB2037
SPE7L7-26-T-4480
SECTION B
PR: 7017641284 PRLI: 0001 CONT’D
FB2037 AF DLA DIST OKC OK
CP 405 855 3267
7330 SENTRY BLVD BLDG 469 DR 10W
TINKER AFB OK 73145
US
M/F: (TCN) FB203762020029
RDD: 777
PROJ: TP 2
SUPP ADD: YAZ157 SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 08
DIC: A0A DIST: 01 ADV: 2D FC: 6C
Need Ship Date:00/00/0000 Original Required Delivery Date:07/24/2026
SPE7L7-26-T-4480 NSN/Part Number: 2610-01-668-9864 Quantity: 1 EA Purchase Request: 7017641284QTY: 1 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 326211
New
DIBBS
TUBE AND FLAPThe item is a TUBE AND FLAP with NSN 2620-00-544-7141, ordered in a quantity of 151 units under purchase request 1000237583, with a delivery requirement of 82 days after date of award. The solicitation is identified by number SPE7L1-26-U-0508, posted on July 28, 2026, with responses due by August 12, 2026. This procurement falls under NAICS code 326211 and is managed by the Department of Defense's Land Supply Chain. Technical data associated with this item is subject to export control under either ITAR or EAR, restricting disclosure to foreign persons regardless of location and including foreign national employees and foreign subsidiaries of U.S. companies. Access to this controlled data is limited to contractors certified under the US/Canada Joint Certification Program, who have completed mandatory DOD export control training and the DLA questionnaire, and have received formal approval from DLA. DFARS 252.225-7048 governs compliance with these restrictions. The primary point of contact for inquiries is Jennifer Payne at jennifer.payne@dla.mil or 6146921629.
LAND SUPPLY CHAIN

POSTED

about 17 hours ago

DEADLINE

in 14 days
View Details
NAICS: 326211
New
DIBBS
TIRE, PNEUMATIC, VEHIThis contract specifies the procurement of four pneumatic tires for vehicle use, identified by NSN 2610-01-666-2527 and part number 724861519 from Goodyear Tire & Rubber Company, with a total quantity of four units delivered at a unit price of $4.00. The tires must meet a Type I (Code S) shelf-life requirement of 60 months, non-extendable, with at least 42 months of shelf life remaining at the time of delivery. The items are subject to strict packaging and preservation standards per MIL-DTL-4 and MIL-STD-2073-1E, with markings conforming to MIL-STD-129 including a special shelf-life designation code 32. Ozone-depleting chemicals are strictly prohibited in manufacturing, and any alternative substances require prior approval unless already authorized by specification. Packaging must adhere to DLA’s procurement requirements and be palletized accordingly, with no bulk break points allowed other than those designated. Delivery is FOB destination with a five-day lead time, and shipment must occur via fast, traceable means—parcel post is prohibited. The contract requires delivery to Johnson City, Tennessee, with inspection and acceptance occurring at the destination. The required delivery date is July 28, 2026, and the contract is issued under solicitation SPE7L7-26-T-4482 by the Defense Logistics Agency under the DoD, with full technical and quality specifications incorporated from the DLA Master List.
Defense Logistics Agency

POSTED

about 17 hours ago

DEADLINE

in 12 days
View Details
NAICS: 326211
New
DIBBS
INNER TUBE, PNEUMATIThis contract pertains to the procurement of a single pneumatic aircraft inner tube identified by NSN 2620002880247 and part number 302-247-400 from Goodyear Tire & Rubber Company, or an equivalent from Dessert Tire & Rubber Co. LLC with part number AS50141-6.50-8/TR15/OFF CENT/USA. The item must comply with all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, which override any other specifications including ASTM D3951. Ozone-depleting chemicals are strictly prohibited in manufacturing or packaging, and any substitute chemicals require prior approval unless explicitly authorized by the specification. Packaging and marking must conform to MIL-STD-129 and DLA Packaging Requirements, with palletization following RP001 guidelines. The unit of issue is one ea, and the quantity is fixed at one with zero variance allowed. Delivery is required within 20 days of contract award to the destination at Yuma Proving Ground, Arizona, with FOB destination terms and inspection and acceptance performed upon arrival. The shipment must utilize traceable freight methods and cannot be sent via parcel post. All packaging must be labeled in accordance with the contract’s specifications, including the required traceability codes and government identification. The required delivery date is July 24, 2026, and the contract solicitation number is SPE7L7-26-T-4473, issued by the Defense Logistics Agency under NAICS code 326211. The point of contact is Kathy Smith, and all government-use fields are designated for internal tracking and distribution purposes only.
Defense Logistics Agency

POSTED

about 17 hours ago

DEADLINE

in 12 days
View Details
NAICS: 326211
New
DIBBS
TIRE, PNEUMATIC, VEHIThis contract specifies the procurement of two pneumatic tires for vehicular use under NSN 2610-01-671-2299, with a delivery requirement of 20 days after award and delivery occurring FOB destination. The tires must conform to technical and quality standards outlined in the DLA Master List of Technical and Quality Requirements, and must have a minimum of 42 months of remaining shelf life at the time of delivery, despite the standard 60-month shelf-life requirement for Type I tires. All items must be packed and marked in strict accordance with MIL-STD-2073-1E and MIL-STD-129, including special shelf-life markings, and must comply with DLA packaging directives and preservation standards per MIL-DTL-4. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute materials require prior approval. Packaging and palletization must follow RP001 requirements, and the tires must be shipped using the fastest traceable method—parcel post is prohibited. The delivery address is the Naval Construction Group One in Port Hueneme, California, with specific special marking code 32 for shelf-life identification. The contract is issued by the Defense Logistics Agency under solicitation SPE7L7-26-T-4483 with a response deadline of August 10, 2026, and the item is manufactured by Bridgestone Americas Tire Operations with part number 422738. The purchase request is 7017351728 and the quantity is fixed at two units with zero variance permitted.
Defense Logistics Agency

POSTED

about 17 hours ago

DEADLINE

in 12 days
View Details
NAICS: 326211
New
DIBBS
TIRE, SOLIDThe contract specifies the procurement of 4 solid tires, part number 2630011092741, designated as type I with a non-extendable 60-month shelf life, intended for forklift use. Each tire is sized 6.00-9, rated at 10 ply, constructed of natural rubber, and designed as tubeless without a flap, with industrial tread for heavy-duty vehicle applications. The manufacturer is POMP’S TIRE SERVICE, INC., identified by CAGE code 1T1Z4 and part number 26300101. Strict prohibitions ban the use or incorporation of ozone-depleting chemicals, overriding any conflicting specification but not relaxing overall product requirements; acceptable substitutes require prior approval. Packaging must comply with MIL-STD-2073-1E and MIL-DTL-4 standards, with preservation and marking in accordance with MIL-STD-129, including explicit shelf-life labeling as type I. Palletization follows DLA packaging requirements, and all items must be delivered FOB destination within 10 days of contract award with zero quantity variance. Delivery is required to Fort Hood, Texas, with shipment to be made by the fastest traceable means excluding parcel post. The contract is issued under solicitation SPE7L7-26-T-4484 with a required delivery date of July 23, 2026, and the unit price is set at $4.00 per tire, totaling $16.00 for the full order. Items are to be inspected and accepted at the destination point, with preservation, packaging, and marking tightly controlled to ensure readiness and compliance. The National Stock Number and purchase request are formally linked to this transaction, and all documentation, including special markings and packaging codes, must align with active DLA and DoD directives. The point of contact for inquiries is Kathy Smith at the Defense Logistics Agency, and the contract is governed by the latest revisions of referenced technical and quality requirements as published in the DLA Master List.
Defense Logistics Agency

POSTED

about 17 hours ago

DEADLINE

in 12 days
View Details
NAICS: 326211
New
DIBBS
TIRE, PNEUMATIC, VEHIThis contract specifies the procurement of one pneumatic vehicular tire, part number DF9B1 with NSN 2610016925438, sourced from Specialty Tires of America Inc., under solicitation SPE7L7-26-T-4465. The tire is classified as a commercial off-the-shelf item with sufficient catalog data available for evaluation, and it must comply with all applicable technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements. Strict prohibitions are in place against the use of Class I ozone-depleting chemicals, and any substitute chemicals require prior approval unless explicitly permitted by the specification. The tire must have a minimum of 42 months of remaining shelf life at the time of delivery, despite a standard 60-month non-extendable shelf life for Type I (Code S) tires. Delivery is required within 20 days to the destination FOB, with zero variance allowed in quantity, and acceptance occurs at the delivery point. Packaging must conform to MIL-STD-2073-1E and DLA packaging requirements, with marking per MIL-STD-129 and a special shelf-life code of 32. Palletization and unit packaging details are specified, including container types, preservation methods, and handling instructions. The destination is the USS GEORGE H W BUSH CVN 77 in Norfolk, Virginia, with shipping coordinated under DLA procedures C19 and C20. The required delivery date is July 23, 2026, and the point of contact for inquiries is Molly Teegarden at the Defense Logistics Agency.
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

in 9 days
View Details
NAICS: 326211
New
DIBBS
INNER TUBE, PNEUMATIC TThis contract specifies the procurement of aircraft inner tubes for critical aviation applications, particularly for the UH-60 helicopter, with strict technical and quality mandates. The item is a restricted-source product requiring government engineering approval, with only two approved suppliers listed under the source code 091X8: Dessert Tire & Rubber Co., LLC, delivering part numbers AS50141-15X6.00-6/TR-20 and GL-1520N. The product must comply with military standards including MIL-STD-129R for marking, MIL-STD-130N for identification, and TDP Rev B Gen 2 specifications, while explicitly prohibiting the use of Class I ozone-depleting chemicals in any component or manufacturing process. Substitutions require formal approval and do not override product performance requirements. The contract enforces a zero variance in quantity with delivery set for 61 days FOB destination, where inspection and acceptance occur upon receipt. Packaging must adhere to MIL-STD-2073-1E with specific preservation, wrapping, and unit container requirements, and palletization must follow DLA packaging guidelines. The contract is issued under solicitation SPE7LX-26-U-8756 as a total small business set-aside, with a single line item for 1,139 units at a unit price of $1,139.00, totaling approximately $1.3 million. The NSN 2620-01-126-9456 identifies the exact material, and the contract is managed by the Strategic Acquisition Program Directorate under the Department of Defense. All technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements accessed through the official DLA website, with revisions controlled according to the solicitation or award date depending on acquisition size. The item is classified as critical application, necessitating strict configuration management and engineering oversight. Delivery must meet the designated acceptance point at the destination, with no deviations allowed without prior government authorization.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

1 day ago

DEADLINE

in about 7 hours
View Details
NAICS: 326211
New
Federal
82 SFS Airless Mule TiresThe U.S. Air Force is seeking quotes for the provision and installation of airless mule tires for four Kawasaki Mule UTVs at Sheppard Air Force Base, Texas, under solicitation FA302026Q0084. This is a combined synopsis and solicitation issued as a Request for Quotes in accordance with FAR Part 12, with no separate written solicitation to follow. The contract will be awarded as a Firm Fixed Price agreement to a single small business concern, with the North American Industry Classification System code 326211 and a size standard of 1,500 employees. The requirement is totally set aside for small businesses. Funds are not currently available, and no award will be made until federal funding is appropriated; the government reserves the right to cancel the solicitation at any time without obligation to reimburse offerors for any costs incurred. All proposals must be submitted via email to Kyle J. Contreras by 2:00 PM CST on July 30, 2026. Inquiries must be submitted in writing by 2:00 PM CST on July 28, 2026. Potential offerors are responsible for regularly checking the posting for amendments and must use a compatible PDF reader to access all solicitation documents available through the provided link.
FA3020 82 Cons Lgc

POSTED

2 days ago

DEADLINE

in 1 day
View Details
NAICS: 326211
New
Federal
VALVE,PNEUMATIC TIREThe contract is for the procurement of 96 pneumatic tire valves, identified by NSN 2640-016944439 and part number RV99-457, manufactured exclusively by CIRCOR AEROSPACE, INC, with delivery required within 255 days from the award date under FOB origin terms. The acquisition is conducted under FAR Part 15 using a non-full and open competition set-aside, and the item is classified as non-commercial, specifically designed for military use, thus exempting it from FAR Part 12 policies. Proposals must be submitted via DIBBS as the preferred method, though email submissions to JENNIFER.CUMMINS@DLA.MIL are permitted, with a 15 MB limit per email; larger proposals must be split. All offers must be in English and denominated in US dollars, and may be subject to the Trade Agreements Act of 1979. Evaluation criteria prioritize a combination of price, delivery capability, and performance, not price alone. The solicitation will be posted on DIBBS on or about August 12, 2026, with responses due by September 10, 2026, and the contracting office is located in Columbus, Ohio, under the DLA Land and Maritime organization.
DLA Land And Maritime

POSTED

2 days ago

DEADLINE

in about 1 month
View Details
NAICS: 326211
New
Federal
Supply of Acoustic Ceiling and Carpet TilesThe contract calls for the supply of specified acoustic ceiling and carpet tiles with a 5 percent overage to ensure sufficient coverage and accommodate installation needs. All items must be properly labeled and packaged to prevent damage during transport, ensuring delivery in optimal condition. The procurement is structured as a subcontract under a Total Small Business Set-Aside, restricted exclusively to small businesses as defined by the SBA under FAR 19.5, with the NAICS code 326211 indicating classification within the plastics product manufacturing sector for floor and wall coverings. The solicitation was posted on July 24, 2026, and responses are due by August 21, 2026, at 2:00 PM. Performance of the contract is required at Newington, NH with a ZIP code of 03801, under the oversight of the Department of Defense through its agency W7NN Uspfo Activity Nhang 157.
W7NN Uspfo Activity Nhang 157

POSTED

5 days ago

DEADLINE

in 23 days
View Details
NAICS: 326211
New
Federal
Wheel and Tire AssemblyThe solicitation SPRL1-26-R-0052 seeks a Firm Fixed Price contract for the supply of Wheel and Tire Assemblies (NSN 2530-01-678-6191, Part Number 90044436, CAGE 12361) under a five-year requirements contract with an estimated maximum of 200 units total. The solicitation closing date has been extended to August 21, 2026, and proposals must be submitted electronically via email to the designated Contract Specialist, with no page or word limits specified but completeness required for eligibility. The item must be manufactured, marked, packaged, and delivered in full compliance with military standards including MIL-STD-2073-1 for preservation and packaging level B, MIL-STD-129 Rev R for labeling and barcoding, and MIL-STD-130 for Unique Item Identification (UII) with data encoded per ISO/IEC 15434 and ANSI MH 10.8.2. Special Packaging Instruction AK00000001 mandates one assembly per container when shipped horizontally, fiberboard lining for sidewall protection, specific container standards (ASTM D6880, D6251, etc.), prohibited stacking without frame support, and explicit warnings against sharp tools or incompatible materials. Wood packaging must meet ISPM-15 heat treatment requirements and carry approved markings. Inspection and acceptance occur at the vendor’s origin by DCMA, with FOB Destination delivery terms requiring the contractor to bear transport risk and costs to the final destination, which may include Def Dist Depot Red River in Texarkana, TX, though administrative delivery is noted to Warren, MI. Pricing is not listed in the solicitation and must be submitted by offerors using standardized forms; contract award will be based on best value to the Government, though it is unclear whether the evaluation will be price-only or include technical factors. All offerors must be registered in SAM and comply with cybersecurity requirements including NIST SP 800-171 and safeguarding covered contractor information systems, while also adhering to prohibitions on subcontracting with entities owned by Russia, China’s military, or state sponsors of terrorism. The contract includes clauses addressing protests, bankruptcy, competition in subcontracting, value engineering, and compensation of former DOD officials. A Certificate of Conformance is required for acceptance, and electronic
DLA Land Warren

POSTED

5 days ago

DEADLINE

in 23 days
View Details
NAICS: 326211
New
SLED
Supply of 295/75R22.5 Deep Tread Truck TiresFairfax County is seeking to procure 95 units of 295/75R22.5 deep tread truck tires designed for enhanced durability in high-demand fleet operations. The contract, posted on July 23, 2026, is categorized as a subcontract and has a response deadline of August 20, 2026, at 6:00 PM. The NAICS code 326211 indicates the procurement falls under the manufacturing of rubber tires and inner tubes. The place of performance and point of contact details are not specified, and no set-aside provisions are indicated. All bids must be submitted through the designated online portal linked in the posting, and the tires must meet the specified deep tread requirement to ensure extended service life under heavy-duty conditions.
Fairfax County

POSTED

6 days ago

DEADLINE

in 22 days
View Details

More opportunities from Department Of Defense → OKC CP

Same awarding agency

NAICS: 333515
New
DIBBS
INSERT, CUTTING TOOLThe contract pertains to the procurement of cutting tool inserts, specifically part number 3455-01-397-6768, with two separate line items totaling 19 units—9 units for one delivery and 10 for another—each subject to firm fixed pricing and zero variance in quantity. All items must be delivered within 40 days after the award date, with FOB origin and inspection and acceptance occurring at the destination. Packaging must comply with ASTM D3951, but all DLA Master List of Technical and Quality Requirements take precedence, requiring MIL-STD-129 labeling and palletization per RP001 guidelines. The Unit of Issue and Quantity per Unit Pack are strictly defined, and parcel post is prohibited; shipments must use traceable freight methods. Delivery addresses are specified to DLA Distribution Oklahoma City at Tinker Air Force Base, with explicit shipping instructions and government-only identifiers provided. The item is classified under NAICS 333515 and relates to Kennametal Inc.’s Charlotte division, with technical and quality specifications governed by the DLA Master List referenced on their official site. The solicitation number is SPE8E5-26-Q-0360, with a response deadline in August 2026 and deliveries scheduled for February and April 2026.
Cutting Tool and Machine Tool Accessory Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 6 days
View Details
NAICS: 541690
New
DIBBS
Technical Data & Compliance Documentation SupportThe contract seeks support for the preparation and submission of technical data, material safety data sheets, hazard labels, and all necessary compliance documentation required for defense-related operations. This subcontract is issued under NAICS code 541690 and is associated with the Department of Defense through the OKC CP office, with performance location designated at Tinker Air Force Base, Oklahoma. The solicitation was posted on July 23, 2026, and responses are due by July 29, 2026, indicating a short turnaround period for qualified vendors to submit proposals. All deliverables must meet the stringent regulatory and safety standards expected by the Department of Defense, with emphasis on accurate, timely, and fully compliant documentation to support procurement, handling, and operational safety protocols. The work is critical to ensuring regulatory adherence and safe deployment of materials within military systems and facilities.
Other Scientific and Technical Consulting Services

POSTED

6 days ago

DEADLINE

in about 7 hours
View Details
NAICS: 325998
New
DIBBS
High-Value Industrial Compound SupplyThe contract is for the supply of 1,000 units of a high-cost industrial compound, with full compliance documentation required as a condition of award. It is issued as a subcontract under the NAICS code 325998, which classifies it within other chemical product and preparation manufacturing. The solicitation was posted on July 23, 2026, with a response deadline of July 29, 2026, indicating a short turnaround window for interested parties to submit proposals. The place of performance is specified as Tinker Air Force Base with a zip code of 73145-8000, and the contracting agency is the Department of Defense under the office designation OKC CP. The contract is not subject to any set-aside provisions, meaning it is open to all qualified subcontractors regardless of business size or status. All submissions must be made through the official DIBBS portal using the provided solicitation number SPE8ES26T2441.
All Other Miscellaneous Chemical Product and Preparation Manufacturing

POSTED

6 days ago

DEADLINE

in about 7 hours
View Details
NAICS: 325510
New
DIBBS
Specialized Sealant for Aviation UseThe contract calls for the supply of 2,000 units of a specialized aviation-grade sealant under the procurement reference number SPE8ES23P0493, intended for use in aviation applications requiring high-performance materials. The solicitation is classified as a subcontract and is managed by the Department of Defense through its OKC CP office, with performance required at Tinker Air Force Base, Oklahoma, zip code 73145-8000. The North American Industry Classification System code 325510 indicates the industrial category involves chemical manufacturing, specifically for paints, coatings, and sealants. The opportunity was posted on July 23, 2026, with a firm response deadline of July 29, 2026, indicating a short turnaround for qualified suppliers to submit proposals. No set-aside designation is specified, meaning the contract is open to all eligible subcontractors without restrictions based on business size or status. All communications and submissions must be made through the official DIBBS platform via the provided link.
Paint and Coating Manufacturing

POSTED

6 days ago

DEADLINE

in about 7 hours
View Details
NAICS: 325193
New
DIBBS
Aircraft Maintenance Solvent SupplyThe contract involves the supply of 12,000 units of cleaning solvent specifically intended for aircraft or equipment maintenance, with a focus on operations at Tinker Air Force Base, identified by the zip code 73145-8000. The solicitation falls under the NAICS code 325193, indicating it relates to other chemical product and preparation manufacturing, and is classified as a subcontract opportunity. The posting date is July 23, 2026, with a firm response deadline of July 29, 2026, providing a six-day window for interested parties to submit proposals. The contracting agency is the Department of Defense through its OKC CP office, and the opportunity is accessible via the DIBBS platform at the provided URL. There is no specified set-aside designation, meaning the contract is open to all eligible suppliers regardless of business size or status.
Ethyl Alcohol Manufacturing

POSTED

6 days ago

DEADLINE

in about 7 hours
View Details
NAICS: 325510
New
DIBBS
Electrical Component Sealing Compound SupplyThe contract pertains to the supply of 4,000 units of sealing compound intended for electrical or electronic applications, with the procurement classified as a subcontract under NAICS code 325510, which corresponds to industrial chemical and allied product manufacturing. The solicitation was posted on July 23, 2026, with a response deadline of July 29, 2026, indicating a tight turnaround for potential suppliers to submit proposals. The place of performance is specified as Tinker Air Force Base with a zip code of 73145-8000, suggesting the sealing compound is destined for use within Department of Defense facilities, specifically under the administrative purview of OKC CP. The contract is linked to a DIBBS portal listing, implying the procurement process follows federal defense acquisition procedures. While no set-aside designation is provided, the involvement of the Department of Defense and the specific technical requirements indicate the compound must meet stringent military-grade standards for durability, insulation, and environmental resistance.
Paint and Coating Manufacturing

POSTED

6 days ago

DEADLINE

in about 7 hours
View Details
NAICS: 324110
New
DIBBS
Industrial Lubricant Supply (Gear Lubricant)The contract seeks the supply of 1,000 units of gear lubricant intended for use in industrial or military equipment, under the title Industrial Lubricant Supply Gear Lubricant. It was posted on July 23, 2026, with a response deadline of July 29, 2026, and is structured as a subcontract. The North American Industry Classification System code is 324110, indicating the focus on petroleum and coal products manufacturing. The solicitation originates from the Department of Defense through the OKC CP office, with performance requirements centered at Tinker Air Force Base, zip 73145-8000. The contract does not specify a set aside type or point of contact, and all submissions must be made through the DIBBS platform via the provided UI link.
Petroleum Refineries

POSTED

6 days ago

DEADLINE

in about 7 hours
View Details
NAICS: 561910
New
DIBBS
Hazardous Material Packaging & LabelingThe contract requires the packaging, labeling, and documentation of hazardous materials in full compliance with federal and military standards, ensuring safe handling, transport, and storage of dangerous goods. All work must adhere to stringent regulatory requirements tied to defense operations, with performance centered at Tinker Air Force Base, Oklahoma, where the materials will be processed and prepared for military use. The solicitation is classified as a subcontract under NAICS code 561910, indicating it falls within the other support services category for waste management and remediation services, suggesting the work may involve specialized logistical or disposal support functions. The opportunity was posted on July 23, 2026, with responses due by July 29, 2026, providing a limited six-day window for interested parties to submit proposals. The contracting entity is the Department of Defense through OKC CP, and the performance location is specifically designated as Tinker AFB with ZIP code 73145-8000. No set-aside designation is specified, meaning the contract is open to all eligible subcontractors without preference for small, minority-owned, or other specially designated businesses. Participation requires expertise in hazardous materials handling and full familiarity with Department of Defense protocols for labeling, packaging, and reporting, with all documentation needing to meet exacting compliance standards.
Packaging and Labeling Services

POSTED

6 days ago

DEADLINE

in about 7 hours
View Details
NAICS: 325510
New
DIBBS
Sealing Compound SupplyThe contract calls for the procurement and delivery of sealing compound in 2,000 quart units for industrial applications, specifically under a subcontract arrangement. The solicitation, identified by the reference number SPE8ES26T2441 and classified under NAICS code 325510 for paint and coating manufacturing, was posted on July 23, 2026, with a response deadline of July 29, 2026. The place of performance is designated as Tinker Air Force Base with a ZIP code of 73145-8000, and the contracting agency is the Department of Defense through OKC CP. The requirement is for a quantity sufficient to support operational or maintenance needs typical of defense industrial environments, and all deliveries must comply with specified industrial standards for performance and quality. No set-aside provisions are indicated, meaning the opportunity is open to all eligible contractors without preference for small business or other categories.
Paint and Coating Manufacturing

POSTED

6 days ago

DEADLINE

in about 7 hours
View Details