This Solicitation opportunity from Department Of Defense was posted on June 30, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.
TIRE, PNEUMATIC, VEHICUL
Contract Overview
Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.
Active Opportunities Like This One
AI Contract Overview
The contract pertains to the procurement of four pneumatic tires for vehicular use, identified by NSN 2610-01-623-7103 and manufacturer part number 139-913-205-M from Goodyear Tire & Rubber Company, under solicitation SPE7L7-26-Q-1917. Delivery is required within 60 days after award, with firm fixed pricing and zero variance allowed in quantity. Inspection and acceptance occur at the destination, and the tires must have at least 42 months of remaining shelf life at time of delivery, adhering to Type I (Code S) shelf-life requirements of 60 months non-extendable. Packaging must comply with MIL-STD-2073-1E and MIL-DTL-4 for non-aircraft tires, including preservation, wrapping, and marking in accordance with MIL-STD-129, with special shelf-life labeling required. Palletization follows DLA’s RP001 packaging requirements, and shipment must be traceable via expedited freight—parcel post is prohibited. The delivery address is Fort Campbell, Kentucky, and the unit of issue is each. Quality assurance is governed by MIL-STD-1916 or ASQ H1331 Table 1 using zero-based sampling unless otherwise specified, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes are deemed major. MIL-STD-105/ASQ Z1.4 may determine sample size, but acceptance requires zero non-conformances absent contractual exceptions. Technical and quality requirements referenced in the DLA Master List govern this contract, with revisions in effect on the solicitation or award date controlling depending on acquisition size. All markings and documentation must reflect government standards, and the supply is subject to federal procurement regulations with no set-aside classification. The point of contact for inquiries is Molly Teegarden of the Defense Logistics Agency.
General Info
Agency
NAICS
Place of Performance
USASet-Aside
Documents
(1)AI Contract Breakdown
Uniform Contract FormatWhat is UCF?
Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.
Timeline
Submission Closed
Organization & Contact Information
Full Description
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
SAMPLING: THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION, STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT UNLESS OTHERWISE SPECIFIED IN THE CONTRACT. Type I, 60 Months shelf life RS073: Shelf-life requirement RS001 for TYPE I (CODE S) tires with a shelf-life of 60-months (non-extendable) with the following exception applies to this item. Tires furnished under this contract/order shall have at least 42-months of shelf-life remaining at time of delivery.
RS024: Shelf-life requirement RS001 for a TYPE I (CODE I) item with a shelf life of 72 months (non-extendable) applies to this item.
GOODYEAR TIRE & RUBBER COMPANY, THE 04NP3 P/N 139-913-205-M
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments%2FDLMS% 2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
ITEM NO. SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT. 0001 2610-01-623-7103 4.000 EA $ _______________ $ ______________ TIRE,PNEUMATIC ,VEHICULAR
PRICING TERMS: Firm Fixed Price
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
SPE7L7-26-Q-1917
SECTION B
SUPPLY/SERVICE: 2610-01-623-7103 CONT'D
FOB: DESTINATION DELIVERY DATE: 60 DAYS ADO
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E QUP:001 PRES MTHD:ZZ CLNG/DRY:Z PRESV MAT:ZZ WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z UNIT CONT:ZZ OPI:M INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ PACK CODE:U MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129. SPECIAL MARKING CODE:32 -32 Type I, shelf life
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PRESERVATION & PACKAGING SHALL BE IAW THE LATEST REVISION OF MIL-DTL-4 PACKAGING OF NON-AIRCRAFT TIRES AND INNER-TUBES.
SPECIAL MARKING REQUIREMENT: APPLY SHELF LIFE MARKINGS IAW MIL-STD-129.
BULK BREAK POINT:
W34GMT
0129 CS BN CO A COMPOSITE AWCF SSF BLDG 5505A WICKHAM AVE FORT CAMPBELL KY 42223-5000 US
RDD(3-POS RDD)/NMCS SHIPMENT. SHIP BY FASTAST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
W34GMT
0129 CS BN CO A COMPOSITE AWCF SSF BLDG 5505A WICKHAM AVE FORT CAMPBELL KY 42223-5000 US
MARKFOR
W34GMT
0129 CS BN CO A COMPOSITE AWCF SSF BLDG 5505A WICKHAM AVE FORT CAMPBELL KY 42223-5000 US
M/F: (TCN) W34GMT61400281 RDD: N PROJ: TP 1 SUPP ADD: W9046W SIG: C
FOR GOVERNMENT USE ONLY: (IPD) 02
DIC: A0A DIST: V ADV: FC: Z9
GOVT USE External External External Customer RDD/ ITEM PR PRLI PR PRLI Material Need Ship Date. 0001 7016916378 0001 N/A N/A N/A 05/26/2026
SPE7L7-26-Q-1917
SECTION B
SUPPLY/SERVICE: 2610-01-623-7103 CONT'D
SPE7L7-26-Q-1917 NSN/Part Number: 2610-01-623-7103 Quantity: 4 EA Purchase Request: 7016916378QTY: 4 Delivery: 60 days ADO
More opportunities from Department Of Defense → Defense Logistics Agency
Same awarding agency
Find Active Opportunities Like This
Get AI-powered intelligence on the opportunities still open
Every page of the solicitation package shredded into a compliance breakdown
AI-powered matching based on your capabilities and past performance
Competitor and incumbent history on the requirement
Automated alerts on amendments, Q&A deadlines, and award
Join 650+ contractors already using CLEATUS
