Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

TOOL, SUB, ASSEMBLY

Active
SPE4A7-26-T-060NFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of a TOOL, SUB, ASSEMBLY with NSN 5110-01-155-3827 and part number D9851-14, for a quantity of five units to be delivered FOB origin within 171 days. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with revisions in effect on the solicitation or award date depending on the acquisition type. Sampling must comply with MIL-STD-1916 or ASQ H1331 Table 1 using a zero-based plan, where critical attributes require verification level VII or an AQL of 0.1, major attributes IV or 1.0, and minor II or 4.0, with unspecified attributes treated as major. Zero non-conformances are mandatory in sample lots unless otherwise stated. Packaging must adhere to ASTM D3951, but DLA requirements supersede it, and all items must be labeled and marked per MIL-STD-129 with unit packaging and palletization following RP001 guidelines. Delivery is to the DLA Distribution facility in New Cumberland, Pennsylvania, with inspection and acceptance occurring at destination. The contract enforces a strict 0% variance on quantity, and the required ship date is September 6, 2026, with an original delivery target of January 28, 2027. Transportation and shipment details are bound by DLAD procedural notes C19 and C20, and the unit of issue is confirmed per federal standards. The solicitation number is SPE4A7-26-T-060N, with a response deadline of July 30, 2026, and the point of contact is Ashly Kersch.

General Info

Five TOOL SUB ASSEMBLY units, NSN 5110-01-155-3827, FOB origin, deliver to New Cumberland by Sept 6, 2026, zero defects, MIL-STD-129 packaging.

Agency

Department Of Defense → ASC SUPPLIER OPER AE AND AF DIVView Agency

NAICS

332216 - Saw Blade and Handtool ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

SPE4A7-26-T-060N.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC SUPPLIER OPER AE AND AF DIV
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV
View Agency Profile
Office AddressUS
Contacts
ASHLY KERSCH
contact@example.gov

Full Description

Show more
TOOL,SUB,ASSEMBLY
TOOL,SUB,ASSEMBLY
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
DEUTSCH COMPANY METAL COMPONENTS
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
SAMPLING:
CRITICAL APPLICATION ITEM
DESIGNED METAL CONNECTIONS INC 14798 P/N D9851-14
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7015852527 0001 EA 5.000
NSN/MATERIAL:5110011553827
DELIVERY (IN DAYS):0171
DELIVER FOB: ORIGIN
SPE4A7-26-T-060N
SECTION B
PR: 7015852527 PRLI: 0001 CONT’D
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:09/06/2026 Original Required Delivery Date:01/28/2027
SPE4A7-26-T-060N NSN/Part Number: 5110-01-155-3827 Quantity: 5 EA Purchase Request: 7015852527QTY: 5 Delivery: 171 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332216
New
DIBBS
PULLER, MECHANICALThe contract specifies the procurement of five mechanical pullers under NSN 5120-01-428-9664, with a unit price of $5.00 per unit and a total price of $25.00. Delivery is required within 20 days from the contract award, with FOB origin terms and zero variance in quantity allowed. The items must be packaged in compliance with ASTM D3951, subject to precedence of all DLA Master List of Technical and Quality Requirements, and labeled according to MIL-STD-129. Packaging and palletization must follow DLA Packaging Requirements, and the supply must be shipped via the fastest traceable means, explicitly prohibiting parcel post. Inspection and acceptance occur at the destination, with sampling governed by MIL-STD-1916 or ASQ H1331 Table 1, requiring zero non-conformances unless otherwise specified. Critical, major, and minor attributes must be verified at levels VII, IV, and II with corresponding AQLs of 0.1, 1.0, and 4.0. The item must be physically marked per RQ017, and government identification must be removed from non-accepted supplies per RQ011. The required delivery date is April 14, 2025, with delivery directed to the Navy Submarine Torpedo Facility in Yorktown, Virginia. The contract number is SPE4A6-26-T-09UD, issued by the Department of Defense’s ASC Commodities Division, with Erin Edwards listed as the primary point of contact.
ASC COMMODITIES DIVISION

POSTED

about 22 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332216
New
DIBBS
INDICATOR, DIALThe contract is for the procurement of three Indicator, Dial units with NSN 5210016581122 and part number 599-7040 from HEXAGON MANUFACTURING INTELLIGENCE, LLC under solicitation SPE8E5-26-T-3694. The delivery is required within 20 days of contract award with FOB origin terms and zero variance allowed in quantity. Inspection and acceptance both occur at the destination, and the items must be packaged in accordance with ASTM D3951, with all DLA Master List of Technical and Quality Requirements taking precedence. Packaging and labeling must comply with MIL-STD-129, and palletization must follow RP001 DLA Packaging Requirements. The items are designated as a Critical Application Item and may be subject to Covered Defense Information requirements. Shipping must be by the fastest traceable means, explicitly prohibiting parcel post, and delivery must be made to McConnell AFB, Kansas with theRDD 777 shipment identifier. The original required delivery date is July 14, 2026, and the contract specifies a unit price of $3.00 per unit for a total of $9.00. All technical, quality, and packaging standards referenced are governed by the DLA Master List effective as of the solicitation issue date. The point of contact for inquiries is Khue Nguyen, with supporting government-use codes and logistics identifiers included for internal processing.
Defense Logistics Agency

POSTED

about 22 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332216
New
DIBBS
CABLE, SPECIAL PURPO
MARITIME SUPPLY CHAIN

POSTED

about 22 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332216
New
Federal
NSN 5120-01-735-8295 Torque wrench
Gsa/fas Region 7 Acqusition Center

POSTED

1 day ago

DEADLINE

in 2 days
View Details
NAICS: 332216
New
Federal
TOOL KITSThe U.S. Navy’s Naval Surface Warfare Center Crane is seeking tool kits under a total small business set-aside as defined by FAR 19.104-1, with the North American Industry Classification System code 332216. All offerors must be currently registered in the System for Award Management and comply with its annual confirmation requirements. The solicitation follows FAR 12.201-1 procedures and is being conducted through Contract Opportunities on sam.gov, which is now the official platform replacing FBO.gov. Responses must be submitted via email to Becky Helton and Andrew Ficklin no later than 12:00 PM Eastern Time on July 24, 2026. The requirement calls for delivery FOB Destination to Crane, Indiana, with the place of performance specified as the same location. Amendments to the solicitation will be posted only on sam.gov before the deadline, and it is the responsibility of vendors to check the site regularly. Post-deadline changes will be communicated only to those who submitted a quote and will be considered for potential award or further discussions. The primary point of contact is Rebecca Helton, with Andrew Ficklin as the secondary contact, both reachable through their respective Navy email addresses and phone numbers listed in the solicitation.
Nswc Crane

POSTED

1 day ago

DEADLINE

in 3 days
View Details
NAICS: 332216
New
Federal
TOOL,UNDERBEAD,CHAMThe contract pertains to the procurement of a TOOL, UNDERBEAD, CHAM under solicitation N0010424QBH53, issued by the Naval Supply Systems Command Weapon Systems Support Mechanical office in Mechanicsburg, PA. Performance is governed by a fixed-price structure with strict compliance requirements tied to the Individual Repair Part Ordering Data (IRPOD), technical drawings, military specifications, and other referenced documentation accessible via the BPMI e-Commerce site, which requires pre-registration and password access. All technical documents are marked NOFORN, restricting distribution to U.S. persons and entities without prior approval from Naval Sea Systems Command. The contract mandates adherence to specific revision levels of referenced documents and prohibits partial use of document revisions; contractors must obtain written approval to deviate from specified technical or delivery requirements. Waiver requests for non-conformances must include full technical justification, supporting data, and an assessment confirming no impact on form, fit, function, or quality of the part. Mercury and mercury-containing compounds are strictly prohibited from direct contact with the supplied items. Contractors are required to submit pre-manufacturing procedure packages within 45 days after contract award and complete certification reports of test and inspection at the end of contract performance, both submitted to NAVSUP-WSS Code N9433 per DI-QCIC-8871 and DI-QCIC-8872 requirements. Packaging must comply with MIL-PRF-23199 and MIL-STD-2073, with specific rules regarding use of heat-sealed envelopes and MIL-DTL-24466 green poly bags under cleanliness control conditions, while fire-retardant packaging is no longer required. Inspection and acceptance criteria are defined by DD Form 250 codes referenced in the contract, and all deliverables must be submitted with appropriate DD Form 1423 data items detailing technical documentation, distribution restrictions, and delivery frequency. Pricing must be submitted by August 24, 2026, following an amendment that extended the original quote window; quotes submitted via email or NECO must specify their validity period. All contractual documents are deemed issued upon electronic transmission, and acceptance of the proposal constitutes a binding agreement. The solicitation is a small business set-aside, and failure to meet delivery dates or technical specifications without approved exceptions may result in contract rejection or penalties.
Navsup Weapon Systems Support Mech

POSTED

1 day ago

DEADLINE

in 27 days
View Details
NAICS: 332216
New
Federal
NSN 3540-00-223-8436 STEEL STRAPPING, HAND
Gsa/fas Region 7 Acqusition Center

POSTED

1 day ago

DEADLINE

in 2 days
View Details
NAICS: 332216
New
DIBBS
Supply of Commercial Weighing Scale (NSN: 6670016572981)The contract calls for the procurement and delivery of one commercial off-the-shelf weighing scale identified by National Stock Number 6670-01-657-2981, specifically requiring compliance with military packaging, marking, and hazardous material standards to ensure suitability for defense operations. The item must meet all applicable military specifications for handling, storage, and transportation, even though it is a commercially available product. Performance is to be fulfilled at FPO, ZIP 96643, indicating delivery to a military postal facility, likely for use by U.S. forces overseas or in remote locations. Submitted under a subcontract type, the solicitation is issued by the ASC Commodities Division within the Department of Defense, targeting vendors with expertise in industrial measuring equipment. The NAICS code 332216 confirms the classification under other fabricated metal product manufacturing, aligning with the scale’s production category. Bidders must submit proposals by August 3, 2026, with the opportunity posted on July 26, 2026, providing a seven-day response window. All deliveries must adhere strictly to federal and military logistics requirements, and while no set-aside status is specified, the requirement for militarized packaging suggests the need for suppliers experienced in defense supply chain protocols.
ASC COMMODITIES DIVISION

POSTED

2 days ago

DEADLINE

in 6 days
View Details
NAICS: 332216
New
DIBBS
SCALE, WEIGHINGThe contract pertains to the procurement of a scale and weighing device identified by NSN 6670016572981, classified as a commercial off the shelf item, with a single unit quantity required for delivery within 20 days under FOB destination terms. Delivery is required by July 20, 2026, with strict compliance to MIL-STD-2073-1E packaging standards, MIL-STD-129 marking requirements, and DLA packaging guidelines, including a prohibition on mercury or mercury compounds in any preservation, packaging, or marking processes. Sampling must adhere to MIL-STD-1916 or ASQ H1331 with zero non-conformances permitted unless otherwise stipulated, and all attributes not otherwise defined are treated as major with a default AQL of 1.0. The item must be palletized per DLA requirements, marked without special codes, and shipped via traceable freight methods—parcel post is explicitly forbidden. Two separate delivery points are specified: one for USS Essex LHD 2 at FPO AP 96643 and another for USS Boxer LHD 4 at FPO AP 96661, each linked to the same contract number SPE4A6-26-T-09RE and identical technical and quality specifications. All shipments must comply with DLA vendor procedures and use the official vendor shipment management system, with government use codes and transportation directives applying as noted. The unit of issue is each, with a contract price of $1.00 per unit.
ASC COMMODITIES DIVISION

POSTED

2 days ago

DEADLINE

in 6 days
View Details
NAICS: 332216
New
DIBBS
THERMOSTATThe contract pertains to the procurement of thermostats identified by NSN 6685-01-088-0213, with a quantity of 18 units to be delivered FOB origin within 166 days, with no variance allowed in quantity. Delivery is required to the designated receiving warehouse in Tracy, California, and inspection and acceptance both occur at the destination. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including special marking for delicate instruments, and palletization must adhere to DLA’s packaging requirements. Preservation methods specify a dry, non-corrosive environment with no moisture-sensitive materials, and all packaging materials must be free of mercury or mercury compounds. The thermostats must be manufactured by certified suppliers including Munters Corporation and Sensata Technologies, Inc., with specified part numbers. Sampling and quality verification follow MIL-STD-1916 or ASQ H1331, with zero non-conformances required in the sample unless otherwise stated, and attributes are assigned strict verification levels. Mercury and mercury-containing compounds are strictly prohibited except for functional uses in batteries, lamps, sensors, or weapon systems as explicitly permitted, and any portable mercury-containing devices must have a secondary containment. All technical and quality requirements are drawn from the DLA Master List, with revisions controlled according to acquisition type. The contract is issued under solicitation SPE4A5-26-T-309J, with a response deadline in August 2026 and an original delivery requirement in April 2027, with a mandatory shipment date of January 2027.
ASC SUPPLIER OPER OEM DIVISION

POSTED

2 days ago

DEADLINE

in 6 days
View Details
NAICS: 332216
New
Federal
5180014263972, Tool Kit, PipefittersThe General Services Administration’s Supply Chain Management Contracting Division is seeking quotes for the Pipefitters Tool Kit (NSN 5180014263972) under RFQ 47QSSC26Q0237, with submissions due by July 28, 2026. This is a firm-fixed-price procurement issued on a brand-name basis, not set aside for small businesses, and evaluated solely on low price after administrative compliance. Vendors must be registered to receive purchase orders electronically via the OMS Vendor Portal or EDI. All deliveries are FOB Destination within the Continental United States, with exact delivery locations specified on individual purchase orders. Proposals must fully complete all required fields on pages 1 and 2 of the RFQ and satisfy all administrative requirements in Section 3; failure to do so results in automatic disqualification. The contract mandates strict adherence to military and commercial packaging, preservation, and marking standards, primarily MIL-STD-129R for labeling and shipping, ASTM D-3951 for commercial packaging, and MIL-STD-2073-1 for preservation. All units must be properly marked with NSN, CAGE code, contract number, preservation method and date, shelf life, and hazard information where applicable. Exteriors require Military Shipping Labels with 2D PDF417 barcodes containing TCN, TAC, consignee, gross weight, and RDD. Hazardous materials must comply with DOT HMR and OSHA HazCom standards, including proper labeling and SDS submission. Wood packaging must meet ISPM-15 requirements. Inspection and acceptance occur at the destination, with the vendor responsible for 100% compliance. Invoicing is required through electronic systems, and all vendors must provide valid CAGE codes and meet registration prerequisites to be considered for award.
Supply Chain Management Contracting Division Gsa/fas/gss/qscb

POSTED

4 days ago

DEADLINE

in about 6 hours
View Details
NAICS: 332216
New
Federal
NSN 5120-01-334-3162 (LIFTER, BOWL SHELL)The General Services Administration’s Supply Chain Management Contracting Division is soliciting quotes for NSN 5120-01-334-3162, a brand-name-only item known as a LIFTER, BOWL SHELL, under solicitation number 47QSSC-26-Q-0214. This procurement is not a small business set-aside and will be awarded using the Lowest Price Technically Acceptable (LPTA) method, meaning vendors must first meet all administrative and technical compliance requirements—including submitting complete RFQ and MIL-STD-129 forms, IPD, and brand name justification—to be considered, after which the lowest responsive and responsible offeror will be selected. Deliveries must be made FOB Destination within the Continental United States, with ultimate consignees potentially located OCONUS via consolidation points, and all shipments must strictly adhere to MIL-STD-129R marking and labeling standards, including accurate NSN, CAGE code, contract number, preservation details, and 2D PDF417 barcoding on all containers. The contractor must also ensure compliance with packaging standards such as ASTM D-3951 for non-hazardous items and GSAM 552.223-73 for hazardous materials, and must be registered or willing to register with the EDI or OMS vendor portal for electronic order receipt. The solicitation closes on July 31, 2026, and submissions must be emailed to erin.ji@gsa.gov; incomplete or late submissions will be disqualified. Although no formal FAR contract clauses are cited, the procurement is governed by GSAM provisions and DoD directives including DODM 4100.39 and DODI 4140.69, which underpin the brand-name justification and supply chain integrity requirements. No contract value or line-item pricing is provided in the solicitation, and payment, invoicing, and contracting officer representative details are not explicitly stated, with communication and submission oversight centralized through the designated point of contact.
Supply Chain Management Contracting Division Gsa/fas/gss/qscb

POSTED

4 days ago

DEADLINE

in 3 days
View Details

More opportunities from Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV

Same awarding agency

NAICS: 483111
New
DIBBS
Domestic and International Freight Logistics (Ocean & Land)The contract involves the transportation of packaged insulation blankets from origin to destination, with a requirement that all overseas shipments be conducted using U.S.-flag vessels in compliance with 10 U.S.C. § 2643. Transportation is governed by FOB origin terms, meaning the seller is responsible for delivering the goods to the named origin point, after which risk and responsibility transfer to the buyer. The scope includes both domestic and international freight logistics encompassing ocean and land modes to ensure timely and compliant movement of the materials. The solicitation is classified as a subcontract under the NAICS code 483111, which pertains to deep sea foreign transportation of freight. It was posted on July 27, 2026, with a response deadline of August 24, 2026, and is issued by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. The place of performance and point of contact details are not specified, but the contract is accessible via the DIBBS platform for potential bidders to review terms and submit proposals.
Deep Sea Freight Transportation

POSTED

about 22 hours ago

DEADLINE

in 27 days
View Details
NAICS: 323111
New
DIBBS
Defense-Compliant Packaging and PreservationThe contract requires the packaging and preservation of insulation blankets in full compliance with MIL-STD-2073-1E, encompassing all steps necessary for proper defense-standard handling including preservation techniques, wrapping methods, unit containment designated as D3, and labeling according to MIL-STD-129. All items must be palletized following the specifications outlined in DLA RP001 to ensure uniformity, transport readiness, and compatibility with Department of Defense logistics systems. The work must meet exacting military standards for durability, protection against environmental degradation, and traceability throughout the supply chain. This is a subcontract opportunity issued by the Department of Defense under the ASC SUPPLIER OPER AE AND AF DIV, with a response deadline of August 24, 2026. The North American Industry Classification System code 323111 indicates the work falls under printing and related support activities, though the actual task involves specialized military packaging operations. The contract does not specify a set-aside classification or geographic performance location, and all submissions must adhere strictly to the referenced military standards without deviation to ensure full acceptance by defense logistics authorities.
Commercial Printing (except Screen and Books)

POSTED

about 22 hours ago

DEADLINE

in 27 days
View Details
NAICS: 561990
New
DIBBS
Government Surplus Material Inspection and HandlingThe contract requires comprehensive inspection, verification of government ownership, and proper handling of surplus materials under strict quality standards, with zero non-conformances permitted. All sampling and evaluation must adhere to MIL-STD-1916 or ASQ H1331 protocols, ensuring rigorous compliance and defect-free outcomes throughout the process. The work involves confirming the legitimacy and status of surplus items prior to handling, with no tolerance for deviations from established quality controls. This subcontract is issued by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV and falls under the NAICS code 561990 for other support services. The solicitation was posted on July 27, 2026, with responses due by August 24, 2026. The place of performance and specific location details are not provided, but the work is tied to government surplus material management under federal oversight. The contract emphasizes accountability, adherence to military standards, and complete documentation to support government property control and disposition requirements.
All Other Support Services

POSTED

about 22 hours ago

DEADLINE

in 27 days
View Details
NAICS: 336412
New
DIBBS
Aircraft Insulation Blanket ManufacturingThe contract seeks the manufacture of aircraft cabin insulation blankets compliant with NSN 1680-01-581-8998 and part number 724E4103-32, adhering precisely to the technical requirements established by Triumph Fabrications-St. Louis Inc and the Defense Logistics Agency. The work must meet all specified material, dimensional, and performance standards to ensure compatibility and safety in military aircraft environments. Submission deadlines are set for August 24, 2026, with the solicitation posted on July 27, 2026, indicating a timeline for qualified manufacturers to respond. This transaction is categorized as a subcontract under NAICS code 336412, signaling involvement in aerospace product and parts manufacturing. Performance is expected to support Department of Defense operations overseen by the ASC SUPPLIER OPER AE AND AF DIV, with no set-aside provisions specified, allowing open competition among eligible contractors.
Aircraft Engine and Engine Parts Manufacturing

POSTED

about 22 hours ago

DEADLINE

in 27 days
View Details
NAICS: 484220
New
DIBBS
Traceable Freight and Delivery LogisticsThe contract requires the transport and final delivery of completed cable assemblies from the manufacturer to DLA Distribution in Barstow, California, using a traceable freight method with parcel post explicitly prohibited to ensure full shipment accountability and security. The work must be performed under NAICS code 484220, which classifies it as transportation services for trucks and other freight. The place of performance is designated as Yermo, California, with a zip code of 92398-5048, indicating the operational scope centers around logistics coordination in that region, even though the ultimate delivery endpoint is Barstow. This is a subcontract awarded by the Department of Defense under the ASC SUPPLIER OPER AE AND AF DIV, with a posted date of July 27, 2026, and a strict response deadline of July 30, 2026, leaving a narrow window for potential vendors to submit proposals. The requirement for traceable shipping underscores the critical nature of the cargo, which involves sensitive or mission-critical cable assemblies, necessitating end-to-end visibility, documentation, and secure handling procedures throughout transit. There is no set-aside designation specified, meaning the contract is open to all eligible subcontractors capable of meeting the stringent logistics demands without restrictions based on business size or ownership type.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 22 hours ago

DEADLINE

in 2 days
View Details
NAICS: 493190
New
DIBBS
MIL-STD-Compliant Packaging and Labeling ServicesThe contract requires certified packaging, labeling, and marking services fully compliant with MIL-STD-2073-1E and MIL-STD-129 for defense logistics shipments, ensuring all materials meet rigorous military standards for handling, storage, and transport. Comprehensive hazard communication documentation must be included to support safety and regulatory compliance across the supply chain. The work is designated as a subcontract under NAICS code 493190, which covers warehousing and storage services, and is managed by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. Performance must be conducted at the designated location in Yermo, California, with the zip code 92398-5048. Responses are due by July 30, 2026, with the solicitation posted on July 27, 2026, and all submissions must align with the specified military standards and timelines to qualify for award.
Other Warehousing and Storage

POSTED

about 22 hours ago

DEADLINE

in 2 days
View Details
NAICS: 334390
New
DIBBS
Special-Purpose Electrical Cable Assembly ManufacturingA single unit of a special-purpose electrical cable assembly identified by NSN 6150-01-586-8572 is being manufactured under a subcontract requiring full compliance with military specifications for design, engineering, and production. The work involves creating a highly specialized cable assembly tailored for defense applications, with all deliverables expected to meet stringent performance, durability, and safety standards. The finalized product must be prepared for FOB origin delivery to the designated location in Yermo, California, zip code 92398-5048, ensuring all logistics and packaging requirements are fulfilled prior to shipment. The solicitation was posted on July 27, 2026, with a tight response deadline of July 30, 2026, indicating a rapid turnaround expectation for potential subcontractors. The contract falls under NAICS code 334390, which pertains to other electrical equipment and component manufacturing, and is managed by the ASC SUPPLIER OPER AE AND AF DIV under the Department of Defense. While no set-aside designation or point of contact is provided, the urgency and specificity of the requirement imply a critical operational need, and only eligible contractors with proven capabilities in military-grade electrical systems should respond. All submissions must demonstrate full alignment with the technical and compliance requirements of the NSN specification.

POSTED

about 22 hours ago

DEADLINE

in 2 days
View Details
NAICS: 334419
New
DIBBS
CABLE ASSEMBLY, SPECIALThis contract pertains to the procurement of a single special-purpose electrical cable assembly with NSN 6150-01-586-8572, under solicitation SPE4A7-26-T-547L, issued by the Department of Defense through the Defense Logistics Agency. Delivery is required within 20 days of contract award, FOB origin, with no variance allowed in quantity, and inspection and acceptance occur at the destination. The item must be packaged in strict compliance with MIL-STD-2073-1E and marked per MIL-STD-129, with no special marking required. Palletization follows DLA packaging requirements, and shipment must be conducted via traceable means, excluding parcel post. The delivery point is the DLA Distribution Barstow Central Receiving Warehouse, while the freight shipping and markfor address is the Yermo Annex Warehouse in California. The contract incorporates comprehensive technical and quality requirements from the DLA Master List of Technical and Quality Requirements, referenced by R and I codes, and mandates adherence to MIL-STD-1916 or equivalent zero-based sampling plans with zero non-conformances required unless otherwise specified. Configuration change management and variance requests are governed by formal engineering change proposals. The supplier must comply with CMMC Level 2 self-assessment requirements for cybersecurity and is subject to government oversight with specific controls for identification, handling, and distribution of covered defense information. The unit of issue is each, priced as a single unit, with delivery due no later than June 26, 2026, and the contract is subject to Federal acquisition regulations and defense-specific compliance protocols.
Other Electronic Component Manufacturing

POSTED

about 22 hours ago

DEADLINE

in 2 days
View Details
NAICS: 333611
New
DIBBS
PARTS KIT, COOLING TThe contract is for a Parts Kit, Cooling Turbine with NSN 1660-01-161-9773, requiring 134 units to be delivered within 300 days of award. Manufacturing may involve casting or forging operations, necessitating specialized tooling that the government may not possess, and suppliers must submit a Casting and Forging Assistance Request through official DLA channels for support. The item is subject to stringent technical and quality requirements referenced in the DLA Master List, with applicable standards including MIL-STD-1916 or ASQ H1331 for sampling, where critical, major, and minor attributes are assigned verification levels VII, IV, and II respectively, or AQLs of 0.1, 1.0, and 4.0. Zero non-conformances are required unless otherwise stated, and measuring and test equipment must comply with specified standards. The supply is subject to DLA packaging requirements and inspection and acceptance at origin, with government identification to be removed from non-accepted items. Technical data associated with the item is controlled under ITAR or EAR, prohibiting unauthorized export or disclosure to foreign persons anywhere, including domestic subsidiaries or foreign nationals employed by U.S. firms. Compliance with DFARS 252.225-7048 is mandatory, and only DLA contractors with approved US/Canada Joint Certification Program certification, completion of required DOD export control training, and DLA authorization may access such data. Additionally, the contractor must be Cybersecurity Maturity Model Certification Level 2 certified by a third-party assessment organization, and the contract includes physical identification and bare item marking requirements. The solicitation, issued under SPE4A7-26-Q-0893, closed for responses on August 7, 2026, and is managed by the Department of Defense through the ASC Supplier Oper AE and AF Division, with Shenita Tirado as the primary point of contact.
Turbine and Turbine Generator Set Units Manufacturing

POSTED

about 22 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332722
New
DIBBS
STUD, CONTINUOUS THREADThis contract specifies the procurement of a stud with a continuous thread, identified by NSN 5307-01-502-8735 and part number M1222ST4N12C372NCNN, with a quantity of 21 units to be delivered within 137 days under solicitation SPE4A7-26-T-596V. The item must comply with MIL-DTL-1222J technical specifications, including mandatory surface markings of material symbol, manufacturer’s symbol, and lot number directly applied per MIL-DTL-1222, with precedence order for small fasteners and packaging labeling as fallback. Manufacturer symbols must be registered in MIL-HDBK-57. A Certificate of Quality Compliance must accompany every shipment and be forwarded to the DLA Troop Support Contracting Officer, along with adherence to CDRL-COQC-19071 and other quality assurance provisions including RQ001, RQ006, RQ009, RQ011, and RQ017. Sampling must follow MIL-STD-1916, ASQ H1331, or an equivalent zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively, and acceptance requiring zero non-conformances unless otherwise stipulated. The item is designated as a critical application, and no mercury or mercury-containing compounds may be intentionally introduced into the hardware or its packaging, except for specified functional uses per NAVSEA 5100-003D. Packaging must conform to MIL-STD-2073-1E with specific preservation, wrapping, and marking protocols, including MIL-STD-129 labeling and prohibition of mercury in preservation or packaging per IP056. Palletization follows DLA packaging requirements. Delivery is FOB origin with no quantity variance permitted, inspected and accepted at origin. The delivery destination is the DLA Distribution facility in New Cumberland, Pennsylvania, with a required ship date of December 20, 2026, and original delivery date of February 14, 2027. Unit of issue is each, and the contract references DLA’s Master List of Technical and Quality Requirements for applicable technical and quality standards.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 22 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332510
New
DIBBS
SHIMThis contract specifies the procurement of two precision shims with NSN 5365-01-503-7958 under solicitation SPE4A7-26-T-596H, issued by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. Delivery is required within five days FOB origin with no quantity variance permitted, and inspection and acceptance must occur at the manufacturer’s facility. The shims are designated as critical application items, with approved part numbers listed for DACO Precision Inc, Fastenal Company, and JLG Industries, Inc. All packaging must comply with MIL-STD-2073-1E and DLA Packaging Requirements, marked according to MIL-STD-129 with no special marking codes, and palletization must follow RP001 guidelines. Shipping must be via the fastest traceable means, explicitly prohibiting parcel post, with delivery directed to the Norfolk Naval Shipyard in Portsmouth, VA. Quality assurance is governed by a suite of DLA technical and quality requirements, including tailored higher-level quality provisions, inspection and acceptance at origin, removal of government identification from non-accepted items, and physical identification of bare items. Sampling must adhere to MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise specified, and critical, major, and minor attributes must align with verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Measuring and test equipment used must meet RT001 standards. The contract references the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation issue date. The unit of issue is each, with a total price of $2.00 per unit, and the required delivery date is May 19, 2026. All technical, packaging, and inspection mandates are binding and must be strictly followed to ensure compliance and acceptance.
Hardware Manufacturing

POSTED

about 22 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332510
New
DIBBS
SPACER, SLEEVEThis contract is for the procurement of Spacer Sleeve items identified by NSN 5365-01-296-9819 under solicitation SPE4A7-26-T-596Y, classified as a commercial item with no shelf life requirement. The item is designated as a Critical Application Item and must comply with NAS43 Revision 12 dated 11/30/2012, alongside a suite of technical and quality requirements referenced from the DLA Master List. All supplies must adhere to MIL-STD-2073-1E packaging standards, with marking following MIL-STD-129 and no special marking required. Packaging and palletization must meet DLA’s RP001 requirements, and the material must be free from intentional addition of mercury or mercury-containing compounds, except for specified functional uses in batteries, lights, instruments, weapon systems, or chemical reagents authorized by NAVSEA, with portable fluorescent lamps and instruments requiring shock-proof construction and double containment per NAVSEA 5100-003D. Sampling and inspection must follow MIL-STD-1916 or ASQ H1331 Table 1, with zero non-conformances required unless otherwise stated, and attributes must be verified at levels VII, IV, and II for critical, major, and minor classifications respectively. The contract includes two line items totaling 1,499 units, with the first delivering 535 units and the second delivering 964 units, both at fixed unit prices of $535.00 and $964.00 respectively, resulting in total values as specified. Delivery is FOB origin with zero variance allowed in quantity, and items are subject to inspection and acceptance at the destination. The required delivery date is July 31, 2027, with a 170-day lead time from the award. Deliveries must be routed to two DLA distribution depots—Tinker AFB, Oklahoma, and Robins AFB, Georgia—with specific parcel post and freight addresses provided. Transportation procedures must follow DLAD procedural notes C19 and C20. The contract is issued under DoD-authorized units of measure, and the offeror must comply with all applicable technical, quality, environmental, and logistics mandates, including the removal of government identification from non-accepted supplies and adherence to tailored high-level quality requirements applicable to both manufacturers and non-manufact
Hardware Manufacturing

POSTED

about 22 hours ago

DEADLINE

in 7 days
View Details