Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

DUCT ASSEMBLY, AIR C

Awarded

SPE4A624F2312Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The Defense Logistics Agency has awarded a delivery order under contract SPE4AX21DP002 to NORTHROP GRUMMAN SYSTEMS CORPORATION with a total value of $52,507.13, dated July 22, 2026. The award pertains to the procurement of two specific line items: TOOLING identified by NSN/Part 0001S00000054 and a DUCT ASSEMBLY, AIR C with NSN/Part 1680015018279 and PR 7005222932. The contract was issued through a federal acquisition channel and is tied to the DIBBS posting SPE4A624F2312, with no specific set-aside or NAICS code designated. Performance location and point of contact details are not provided, but the order is managed by the Department of Defense through the Defense Logistics Agency, with the primary delivery obligations associated with federal defense logistics requirements.

General Info

NORTHROP GRUMMAN to deliver TOOLING and DUCT ASSEMBLY for $52,507.13 under DLA contract dated July 22, 2026.

Agency

Department Of Defense → Defense Logistics Agency

Contract Value

$52,507.13

NAICS

333514 - Special Die and Tool, Die Set, Jig, and Fixture Manufacturing

Place of Performance

CA, USA

Set-Aside

NONE

Awardee

NORTHROP GRUMMAN SYSTEMS CORPORATION

Award Issued Date

11/06/2023, 12:00:00 AM UTC

Documents

2

Contract Modification P00004 for SPE4A624F2312

modification

High

Award/Contract SPE4AX-21-D-P002

award

Low

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseAwarded

PostedJul 22

Award Notice

AwardedNov 6

Contract was awarded

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeUSA

Organization / AgencyDepartment Of Defense → Defense Logistics Agency

Office AddressUSA

ContactsNo contact information available

Full Description

Show more

DLA award SPE4A624F2312 posted on DIBBS. Awardee: NORTHROP GRUMMAN SYSTEMS CORPORATIO (CAGE 76823) Total Contract Price: $52,507.13 Award Date: 07-22-2026 Delivery order under: SPE4AX21DP002 Line items: - TOOLING (NSN/Part 0001S00000054) - DUCT ASSEMBLY, AIR C (NSN/Part 1680015018279, PR 7005222932)

Similar Contracts

Same NAICS industry code

INSERTER AND REMOVER, B

Solicitation # SPE4A6-27-T-6767

Solicitation SPE4A6-27-T-6767 is a fixed-price, small business set-aside contract issued by the Defense Logistics Agency Weapons Support ASC Commodities Division for the procurement of one bearing and bushing inserter and remover tool, identified by NSN 5120-01-738-1218. The item is to be delivered to the DLA Distribution DDSP New Cumberland facility in Pennsylvania, with a need ship date of July 18, 2027, and a final required delivery date of October 31, 2027. Inspection and acceptance will occur at the destination in accordance with FAR 52.246-2. The contract mandates strict adherence to technical and quality requirements, including sampling methods per MIL-STD-1916 or ASQ H1331 and packaging standards according to ASTM D3951 and DLA RP001. Marking and labeling must comply with MIL-STD-129 and RQ017 for bare item marking. Due to the nature of the technical data, the item is subject to export controls under ITAR or EAR, requiring contractors to have approved US/Canada Joint Certification Program certification. Additionally, the awardee must comply with the Buy American Act, the Berry Amendment, and CMMC Level 2 cybersecurity standards. Invoicing and payment are to be processed electronically through the Wide Area WorkFlow system.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

BUFFER REMOVAL TOOL

Solicitation # SPE4A7-27-R-X110

Solicitation SPE4A7-27-R-X110 is a total small business set-aside issued by the DLA Weapons Support ASC for the procurement of 30 Buffer Removal Tools, identified as NSN 4933-01-426-3871. This critical application item is associated with Northrop Grumman Systems Corp (CAGE 8KP69) part number 465-0725. The contract is structured as a firm fixed price agreement with a term of five years or until a total value of 350,000 dollars is reached. Delivery is required within 300 days after receipt of order, with shipping terms set as FOB Origin and inspection and acceptance occurring at the destination. The award will be based on best value, weighing cost or price approximately equal to non-price factors, with past performance and quoted delivery being the primary non-price considerations. Technical compliance requires adherence to the DLA Master List of Technical and Quality Requirements, with packaging following ASTM D3951 and marking per MIL-STD-129. Quality assurance involves zero-based sampling plans according to MIL-STD-1916 or ASQ H1331. Additionally, the contractor must comply with CMMC Level 2 self-assessment requirements for handling controlled unclassified information and utilize the Wide Area WorkFlow system for electronic invoicing.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Casting Tooling and Mold FabricationThis subcontract for Casting Tooling and Mold Fabrication supports the DLA Weapons Support Land Supply Chain by providing specialized tooling and molds for prime contractors. The scope of work involves the design and fabrication of molds required to produce antipilferage seals according to the specific geometry of NSN 5340-00-522-2514. To ensure strict technical tolerances are met, the contractor must utilize CNC machining or EDM processes to deliver the completed casting tools and molds. The project is managed under NAICS code 333514 for the Department of Defense and will be performed at Tinker AFB. Interested parties should note the posted date of October 22, 2026, with a response deadline set for November 2, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Tooling Design and FabricationThis subcontract, titled Tooling Design and Fabrication, supports prime contractors serving the DLA Weapons Support Maritime Supply Chain under the Department of Defense. The scope of work involves the design and fabrication of custom tooling, dies, and jigs specifically for forging and machining processes. Utilizing tool steel and Electrical Discharge Machining, the contractor is responsible for delivering custom manufacturing tools that meet the precise technical specifications for NSN 1285012308081. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 333514, with the place of performance located in New Cumberland. The solicitation was posted on October 22, 2026, and requires a response by November 2, 2026.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

P&W Support Equipment and Tooling MaintenanceThis subcontract, managed by the Department of Defense under the AFSC PZIMC agency, involves the evaluation and remedial maintenance of 24 unique part numbers of Pratt and Whitney support equipment and tools. The selected contractor will be responsible for assessing tool wear and condition, repairing specialized fixtures and jigs, and certifying all completed work according to applicable technical data to support prime contractors on US Air Force projects. To be eligible for this effort, contractors must hold either ISO 9001 or AS9100 certification. The primary objective is the delivery of fully repaired and certified support equipment and tooling. The response deadline for this opportunity is November 5, 2026, with performance associated with NAICS code 333514.

FA8132 Afsc Pzimc

POSTED

DEADLINE

Precision Machined Shafts, Spindles, and GearsThis subcontract involves the manufacture of high-precision mechanical drive and transmission components for prime contractors supporting DLA Weapons Support projects. The scope of work includes the turning, milling, and grinding of shoulder shafts, gearshafts, mechanical spindles, and worm wheels. Production requires the use of CNC lathes and gear cutting machinery to ensure all finished machined parts adhere to specific NSN/NIIN dimensions and Alfa Laval part specifications. The project falls under NAICS code 333514 and is managed by the Department of Defense. Interested parties must note the response deadline of November 3, 2026. The primary objective is the delivery of high-tolerance shafts, spindles, and gears that meet rigorous military and technical standards.

DLA Weapons Support

POSTED

DEADLINE

P&W Tooling Evaluation and Repair

Solicitation # PZIMCPWASSS

The Department of Defense, through the AFSC PZIMC at Tinker Air Force Base, Oklahoma, is conducting a sources sought synopsis under solicitation PZIMCPWASSS to identify qualified contractors for the evaluation and remedial maintenance of Pratt and Whitney (P&W) specific tooling. The scope of work involves the inspection and repair of 24 unique part numbers of PWA support equipment and tools, requiring all work to be performed in accordance with original equipment manufacturer specifications and applicable P&W technical data, engineering drawings, and manuals. Interested sources must demonstrate the ability to certify that repairs meet these technical standards and provide detailed inventory records and reporting on repair status. This market research effort seeks vendors with established quality programs, such as ISO 9001 or AS9100, and the necessary expertise to handle specialized tooling under NAICS code 333514. Respondents must submit a Contractor Capability Survey by November 5, 2026, providing comprehensive business information, including CAGE codes and socioeconomic status, along with detailed responses regarding their technical capabilities and past experience. Primary points of contact for this effort are Roger Farris and Sherry Harvey-Tuley. Security clearance levels and foreign participation restrictions have not yet been determined.

FA8132 Afsc Pzimc

POSTED

DEADLINE

Solicitation # N6833526Q1069

The Naval Air Warfare Center Aircraft Division is soliciting quotes for a Firm Fixed Price contract to manufacture, assemble, inspect, and deliver one Cart Adapter, Part Number 70700-77200-041, in support of the Greece Hellenic Navy MH-60R Aircraft Program under Foreign Military Sales Case GR-P-SCK. This procurement is a 100 percent Small Business Set-Aside under NAICS code 333514. The overall contract delivery period is 75 weeks from the date of award, with shipping terms set as Government Origin. Inspection and acceptance will be conducted at the source by the Defense Contract Management Agency and finalized via DD Form 250 through the Wide Area WorkFlow system. Due to the inclusion of Controlled Unclassified Information and export-controlled technical data, offerors must provide proof of CMMC Level 2 self-assessment certification and a certified DD Form 2345 to access the build-to-print drawing package. Award will be based on a Lowest Price Technically Acceptable evaluation, considering technical compliance and past performance via the Supplier Performance Risk System. Proposals must be submitted electronically to the designated point of contact by October 28, 2026, and must include a signed SF18, SAM certifications, and detailed CLIN pricing.

Navair Warfare Ctr Aircraft Division

POSTED

DEADLINE

in about 6 hours

COMPRESSOR TOOL KIT — 4310017370673 — N0010427QBA25

Solicitation # N0010427QBA25

Solicitation NO0014-27-Q-BA25 is a total small business set-aside request for quotations issued by the Department of the Navy, Navsup Weapon Systems Support Mech, for the manufacture and design of a Compressor Tool Kit. The required item is identified by NSN 1HM 4310-01-737-0673 and part number 377-37156-000, with Johnson Controls Navy Systems, LLC listed as the manufacturer. The part number is considered fully descriptive, and no separate technical drawings or data packages are provided. Award will be granted to the responsible offeror submitting the lowest priced, technically acceptable offer, with a 10 percent price evaluation preference applied to HUBZone small business concerns. The contractor must adhere to strict quality and safety standards, including the total exclusion of mercury and compliance with Naval Nuclear Propulsion Information safeguarding policies. Packaging must conform to MIL-STD-2073 and MIL-STD-129, with specific requirements for kit packaging and DLR labeling. Inspection and acceptance will occur at the origin. Invoicing is to be processed electronically via the Wide Area Workflow system. Offerors must submit a completed Standard Form 33, the Schedule of Supplies, and updated SAM representations and certifications to be considered for award.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

BLUE CHECK TOOL — 5120017393768 — N0010426QEJ99

Solicitation # N0010426QEJ99

Solicitation NO0014-26-Q-EJ99 is a total small business set-aside request for quotations issued by the Navsup Weapon Systems Support Mech for the procurement of Blue Check Tools (NSN 5120-01-739-3768). The requirement consists of 20 units in total, split equally between shipment locations W25G1U and W62G2T. This is a fixed-price procurement with delivery required within 180 days on an FOB Destination basis. Award will be determined based on the Lowest Priced Technically Acceptable offer, with a 10 percent price evaluation preference applied to HUBZone small business concerns. Technical compliance requires adherence to specific drawings and part numbers, including drawing 820-8353227 and part number 820-8353227PCBC5000-90SHT26, with a strict prohibition on the intentional addition of mercury. Packaging must comply with MIL-STD-2073 and MIL-STD-129, with specific requirements for Level A or B packing depending on the destination. Inspection and acceptance will occur at the origin. Contractors are required to use the Wide Area Workflow system for invoicing and must provide a Certificate of Compliance upon delivery. The solicitation also mandates compliance with cybersecurity standards under DFARS 252.204-7012 and requires the submission of Safety Data Sheets for any hazardous materials.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Precision Mold Tooling SupplyThe contract awards the design and supply of precision mold tooling specifically for the production of a drain assembly fan component, under the NAICS code 333514 for Die and Die Tooling Manufacturing. This subcontract is issued by the Defense Logistics Agency within the Department of Defense and is intended to support defense-related manufacturing needs. The solicitation was posted on July 21, 2026, and the precise location for performance has not been specified, indicating flexibility in where the molds will be fabricated or delivered. The contract does not have a set-aside designation, meaning it is open to all qualified businesses regardless of size or status. The awarded entity is responsible for delivering molds that meet exacting precision standards to ensure consistent, high-quality output of the component. All work must align with the technical and quality requirements dictated by the defense supply chain, with performance tied to the specified contract reference number SPE4A726V1839.

Defense Logistics Agency

POSTED

DEADLINE

N00164-26-RFPREQ-CR-JXM-0006The Department of the Navy, specifically USSOCOM, has issued a forecast for a contract regarding DCS Family Battery Insertion/Extraction Fixturing and Handling Trays. This requirement falls under NAICS code 333514, which pertains to the manufacturing of non-electric industrial machinery and equipment. The opportunity was posted on July 2, 2026, under the reference number N00164-26-RFPREQ-CR-JXM-0006. Interested parties can find further information through the Secretary of the Navy's small business portal.

POSTED

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

Supplier of Specialized Material (NSN 0001S00000053)This subcontract involves the procurement or manufacture of one unit of specialized hardware identified by NSN/MATERIAL 0001S00000053 to support primes delivering contracts for the Defense Logistics Agency. The selected supplier must ensure all items meet strict DLA technical and quality standards and adhere to RP001 DLA Packaging Requirements for Procurement. The opportunity is categorized under NAICS code 423830 and was posted on October 27, 2026, with a response deadline of November 9, 2026. This requirement is managed through the Department of Defense for the Defense Logistics Agency.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

about 20 hours ago

DEADLINE

Supplier of Cross Test LevelsThis subcontract involves the procurement or manufacture of two units of the Level, Cross Test, identified by NSN 5210-00-863-5651, to support prime contractors delivering for the Defense Logistics Agency. The supplier is required to ensure all tools are produced in strict compliance with the DLA Master List of Technical and Quality Requirements. Operational requirements include adhering to RP001 DLA Packaging Requirements for all shipments and submitting necessary receiving reports through the Wide Area Workflow system. The contract falls under NAICS code 423830 and is managed under the Department of Defense.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

about 20 hours ago

DEADLINE

Supply of MIL-PRF-85285 Polyurethane Coating KitThis subcontract involves the supply of a high-solids, multi-component semigloss gray polyurethane coating for prime contractors supporting Defense Logistics Agency Troop Support. The coating must consist of a pigmented polyester resin solvent and a clear aliphatic isocyanate, matching color 26231 per FED-STD-595. All materials must be produced by a QPL approved manufacturer in accordance with MIL-PRF-85285 and packaged according to MIL-STD-129. The scope of work requires the delivery of one coating kit to China Lake, California. This procurement falls under NAICS code 325510 and is managed by the Department of Defense. Interested parties should note the response deadline of October 30, 2026.

Paint and Coating Manufacturing

POSTED

about 20 hours ago

DEADLINE

Vaneaxial Fan and Impeller Manufacturer/SupplierThis subcontract involves the manufacture or procurement of one Vaneaxial Fan and Axial Fan Impeller to support prime contractors fulfilling Defense Logistics Agency supply contracts. The supplier is required to provide hardware that strictly adheres to the technical data specifications for NSN 4140016182401. All supplied components must be of domestic origin and must undergo rigorous quality control to ensure full compliance with RP001 DLA Packaging Requirements and MIL-STD-129 marking standards. The final deliverable consists of one fully packaged and marked fan and impeller assembly. This requirement falls under NAICS code 333998 and is managed by the Department of Defense. Interested parties must submit their responses by November 9, 2026, for performance located at FPO 96693.

All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 20 hours ago

DEADLINE

Traceable Freight Transport for Armor PlateThis subcontract involves the transportation and delivery of armor plates for prime contractors supporting Defense Logistics Agency Troop Support Construction and Equipment Metals projects. The selected provider is responsible for hauling heavy metal plating using the fastest traceable methods available, specifically excluding the use of parcel post. For international shipments, the contractor must provide comprehensive ocean bills of lading that include the vessel flag and gross weight. Additionally, the provider is required to submit all necessary proof of delivery and tracking documentation to ensure full visibility of the shipments. The work is associated with NAICS code 484220 and is performed under the Department of Defense.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 20 hours ago

DEADLINE

Supply of Armor Plate (NSN 9535-01-611-9013)This subcontract involves the supply of specialized armor plating under NSN 9535-01-611-9013 for prime contractors working on Defense Logistics Agency Troop Support Construction and Equipment projects. The selected provider is responsible for manufacturing or sourcing the armor plate using precision cutting and finishing equipment to ensure strict adherence to technical specifications. All deliverables must comply with MIL-STD-2073-1E packaging standards, specifically requiring the use of a 3 x 2-1/2 inch stiffener to secure items. The contract mandates a delivery timeline of 30 days after the order is placed, with performance centered in the 85613-6000 zip code area.

Fabricated Structural Metal Manufacturing

POSTED

about 20 hours ago

DEADLINE

Defense Logistics Freight Forwarding (USA to Germany)This subcontract involves the specialized transport of aerospace components for prime contractors under Defense Logistics Agency contracts. The scope of work requires the contractor to coordinate the pickup of materials from Eddystone, Pennsylvania, manage all necessary international customs clearance, and ensure final delivery to the NAEW & CF E-3A Component hangar located in Geilenkirchen, Germany. Due to the nature of the cargo, the provider must possess demonstrated experience in international military hardware logistics. The contract is categorized under NAICS code 488510 and mandates a full door-to-door delivery service from the United States to the final overseas destination.

Freight Transportation Arrangement

POSTED

about 20 hours ago

DEADLINE

MIL-SPEC Packaging and Marking ServicesThis subcontract for MIL-SPEC Packaging and Marking Services supports prime contractors on Defense Logistics Agency aerospace contracts. The scope of work involves performing specialized military packaging and marking to ensure components are shipment-ready for international transit. All activities must strictly adhere to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. The contractor is responsible for ensuring that all hazardous material identification and labeling comply with FAR 52.223-3 and DFARS 252.223-7001. This requirement falls under NAICS code 561910. The solicitation was posted on October 27, 2026, with a response deadline of November 9, 2026.

Packaging and Labeling Services

POSTED

about 20 hours ago

DEADLINE

Aerospace Sling Assembly FabricationThis subcontract involves the manufacture and supply of one Sling Assembly for prime contractors supporting Defense Logistics Agency aerospace procurement projects. The contractor is responsible for fabricating the assembly according to Part Number D29810-101 and NSN 4240-01-128-7995, ensuring full adherence to the DLA Master List of Technical and Quality Requirements. The project mandates strict compliance with Buy American requirements and DFARS 252.204-7012 regarding NIST SP 800-171 cybersecurity standards. Interested parties must submit responses by November 9, 2026, for this Department of Defense requirement categorized under NAICS code 336413.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 20 hours ago

DEADLINE

Military Grade Packaging and International Freight ForwarderThis subcontract involves providing specialized military grade packaging and international freight forwarding services for prime contractors under Defense Logistics Agency supply contracts. The scope of work requires strict adherence to MIL-STD-2073-1E and DLA RP001 for packaging, as well as MIL-STD-129 for marking and labeling. The contractor must utilize MIL-SPEC materials and possess the necessary international freight licenses to ensure compliance with military standards. The logistical requirements include managing FOB Destination shipping and customs brokerage to facilitate the delivery of a cabinet to Yokosuka Naval Base in Japan. Performance is centered around the Department of Defense and the Defense Logistics Agency, with the final delivery accepted at the destination. The response deadline for this opportunity is November 9, 2026.

Freight Transportation Arrangement

POSTED

about 20 hours ago

DEADLINE

Small Parts Cabinet ManufacturerThis subcontract involves the manufacture of a small parts cabinet for prime contractors supporting the Defense Logistics Agency. The selected manufacturer must fabricate one completed unit in strict accordance with Basic Drawing 59678 11023404 Revision C and Reference Drawing 19200 11023404. Specific requirements include applying designated color modifications and removing all source identifications to ensure the final product matches NSN 7125012251202. The project requires a contractor equipped with metal fabrication and industrial powder coating capabilities. All work must comply with the Buy American Act. The performance location is designated as FPO 96349, and the response deadline for this opportunity is November 9, 2026.

Sheet Metal Work Manufacturing

POSTED

about 20 hours ago

DEADLINE

HazMat Freight Forwarding and DeliveryThis subcontract for HazMat Freight Forwarding and Delivery involves the transportation of hazardous sealing compound kits for prime contractors supporting Defense Logistics Agency Troop Support supply contracts. The scope of work requires the delivery of 24 kits FOB Destination to Langley Air Force Base in Virginia and Joint Base Elmendorf-Richardson in Alaska. To ensure product integrity, all materials must be transported in refrigerated or climate-controlled vehicles that maintain temperatures below 80 degrees Fahrenheit. The selected provider must possess DOT Hazardous Materials certification and obtain the necessary base access clearances for the specified military installations. All deliveries must be completed within a strict five-day window. This opportunity falls under NAICS code 484220 and is managed through the Department of Defense.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 20 hours ago

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

Casting and Forging Tooling Development

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

CLOSED

Tooling Design and Fabrication for Casting Process

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

CLOSED

PANEL, STRUCTURAL, AI

Solicitation # SPE4A5-25-T-741T

Defense Logistics Agency

POSTED

DEADLINE

FIXTURE, ALIGNMENT, B

Solicitation # SPE4A6-25-T-16CM

Defense Logistics Agency

POSTED

DEADLINE

HOLDER, MAINTENANCE FIXTURE, MULTIPOSITION

Solicitation # SPE7L126FAV4J

Defense Logistics Agency

POSTED

DEADLINE

Solicitation # SPE8E5-26-T-2709

Defense Logistics Agency

POSTED

DEADLINE

TOOL ASSEMBLY, FIRIN

Solicitation # SPE4A726P5368

Defense Logistics Agency

POSTED

DEADLINE

TEST BOX ASSEMBLY P

Solicitation # SPE4A5-26-T-0074

Defense Logistics Agency

POSTED

DEADLINE

Solicitation # SPE4A726P8147

Defense Logistics Agency

POSTED

DEADLINE

Solicitation # SPE4A525F4960

Defense Logistics Agency

POSTED

DEADLINE

AXIAL ALIGN TOOLING

Solicitation # SPE4A5-25-T-742E

Defense Logistics Agency

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS