Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

This Sources Sought opportunity from Department Of Defense was posted on November 20, 2020. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

TOP ATTACK (INCREMENT 1) & FULL NETWORK CAPABILITY (INCREMENT 3), CLOSE TERRAIN SHAPING OBSTACLE

Closed
W15QKN21X0EM5Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 332993
New
Federal
155mm Modular Artillery for Combat Effectiveness (MACE)
Solicitation # W15QKN26R1C5R
The 155mm Modular Artillery for Combat Effectiveness (MACE) program, managed by the U.S. Army Contracting Command – Rock Island at Picatinny, is a solicitation for up to two prototype Other Transaction Agreements (OTAs) under 10 U.S.C. § 4022. The objective is to develop a manufacturable 155mm cargo-carrying artillery projectile system designed to expand domestic manufacturing capacity and modular payload capabilities. The project is structured in two phases: Phase I focuses on projectiles achieving a range of 30 to 35 km, while Phase II targets ranges exceeding 35 km. The prototypes must be compatible with M777A2 Lightweight Towed and M109A7 Paladin 39-caliber weapon platforms, with future adaptability for 52 or 55 caliber systems. Successful prototype completion may lead to a follow-on production contract of up to 10,000 systems per year, supporting a Milestone C production decision by the fourth quarter of FY29. The procurement process involves rigorous technical and administrative requirements, including the submission of a detailed Integrated Master Schedule (IMS) and a cost proposal based on FAR cost principles. Evaluation for Phase I prioritizes the schedule, while Phase II emphasizes technical design and technology maturity. Offerors must certify their business status, specifically regarding nontraditional defense contractor eligibility, and comply with the Buy America Act and National Technology and Industrial Base restrictions. Access to controlled technical data, such as purchase descriptions and drawings, requires the submission of a Non-Disclosure Agreement and a Military Critical Technical Data Agreement. The final response deadline for proposals was extended to October 30, 2026, with submissions required via SAM.gov in specific stand-alone volumes.
W6QK Acc-Ri-Picatinny

POSTED

4 days ago

DEADLINE

in 10 days
NAICS: 332993
DIBBS
49--TEST STAND,TORPEDO,WAR
Solicitation # SPE7M4-27-T-1136
Solicitation SPE7M4-27-T-1136 is a fixed-price request for quotations issued by the DLA Weapons Support Fluid Handling Division for 32 torpedo warshot test stands, identified by NSN 4921017264731. This procurement is a total small business set-aside under NAICS code 332993. Quotes must be submitted electronically via the DLA Internet Bid Board System (DIBBS) by October 23, 2026. The required delivery period is 164 days, with a need ship date of April 6, 2027, and an original required delivery date of October 15, 2027. Shipping is designated as FOB Origin, with the final delivery destination being the DLA Distribution New Cumberland facility in Pennsylvania. The contract mandates strict adherence to packaging and marking standards, specifically ASTM D3951 for general packaging, RP001 for palletization, and MIL-STD-129 for labeling. Inspection and acceptance will occur at the destination. Offerors must comply with domestic sourcing requirements, including the Buy American Act and the Berry Amendment, and must disclose any use of non-domestic materials. Additionally, the contract incorporates various federal and defense acquisition regulations regarding hazardous materials, cybersecurity, and the prohibition of certain foreign military company items. Payment and receiving reports must be processed electronically through the Wide Area WorkFlow system.
DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

7 days ago

DEADLINE

in 3 days
NAICS: 332993
Federal
ARMY AMMUNITION MANUFACTURING INNOVATION INDUSTRIAL BASE INTEGRATION TEAM COMMERCIAL SOLUTIONS OPENING REQUEST FOR SOLUTIONS
Solicitation # AMIP-CSO
The Army Ammunition Manufacturing Innovation Industrial Base Integration Team is soliciting innovative commercial solutions through a Commercial Solutions Opening to modernize and enhance ammunition manufacturing capabilities. The program focuses on integrating advanced technologies such as additive manufacturing, robotics, artificial intelligence, and digital twins to create a more agile and resilient industrial base. Key objectives include accelerating digital transformation via IoT platforms and advanced analytics, improving supply chain resilience, enhancing workforce capabilities, and promoting sustainable manufacturing practices, all while maintaining strict compliance with DoD cybersecurity and readiness standards. Managed by the Joint Program Executive Office for Armaments and Ammunition, the solicitation allows for awards via fixed-price contracts or Other Transaction Agreements. The selection process is phased, beginning with the continuous acceptance of unclassified Phase I white papers and PowerPoint briefings, followed by Phase II pitch sessions, and concluding with detailed Phase III technical and price proposals. Evaluation is based on a peer or scientific review focusing on return on investment, technical merit, availability of funds, and private investment. Successful efforts are intended for funding in Fiscal Year 2026, with typical periods of performance ranging from two to five years. Large business offerors are required to submit comprehensive subcontracting plans targeting various small business categories.
W6QK Acc-Ri

POSTED

19 days ago

DEADLINE

in about 2 months

General Info

NAICS

332993 - Ammunition (except Small Arms) Manufacturing

Place of Performance

NJ

Set-Aside

NONE

Documents

1

Sources+Sought+Notice+Top+Attack+-11-20-2020.docx

DOCX

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

1 update
PhaseClosed
Posted

Sources Sought

Notice updated

The notice description changed.

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → W6QK Acc-Pica
Contacts2 people available
OfficePICATINNY ARSENAL, NJ, 07806-5000, USA
Office AddressPICATINNY ARSENAL, NJ, 07806-5000, USA
Contacts
Edward Gorsky
Morgan Ziatyk

Full Description

Show more
INTRODUCTION On behalf of the Project Manager Close Combat Systems (PM CCS), the Department of the Army, U.S. Contracting Command - New Jersey (CCNJ), Picatinny Arsenal, NJ is issuing this sources sought notice in the form of a survey, to identify potential sources that can meet the design and development requirements of a lethal, command and control capable Terrain Shaping Obstacle (TSO) Top Attack prototype. This effort is the first increment (Inc1) of the Close Terrain Shaping Obstacle (CTSO) Program acquisition strategy. PM-CCS will commence development of the Top Attack system in 3QFY22 followed by Bottom Attack (Inc2) and Full Network Capability incremental (Inc3) development efforts 3QFY25 and 3QFY26, respectively. The Government is interested in sources that can partially or completely meet the desired capability of a Top Attack (Inc1) and aspects of the Full Network Capability (Inc3) system that will improve the ability of the Warfighter to influence enemy maneuvers and deny access to key terrain while allowing friendly forces to maneuver freely within the same battlespace. DISCLAIMER THIS SOURCES SOUGHT IS FOR INFORMATIONAL PURPOSES ONLY. THIS IS NOT A REQUEST FOR PROPOSALS (RFP) TO BE SUBMITTED. IT DOES NOT CONSTITUTE A SOLICITATION AND SHALL NOT BE CONSTRUED AS A COMMITMENT BY THE GOVERNMENT. RESPONSES IN ANY FORM ARE NOT OFFERS AND THE GOVERNMENT IS UNDER NO OBLIGATION TO AWARD A CONTRACT AS A RESULT OF THIS ANNOUNCEMENT. NO FUNDS ARE AVAILABLE TO PAY FOR PREPARATION OF RESPONSES TO THIS ANNOUNCEMENT. ANY INFORMATION SUBMITTED BY RESPONDENTS TO THIS SOURCES SOUGHT NOTICE/QUESTIONAIRE IS STRICTLY VOLUNTARY. ITEM DESCRIPTION PM CCS is executing a Sources Sought in order to evaluate future acquisition approaches for a new hand-emplaced Top Attack (Inc1) terrain shaping capability for a directed close tactical obstacle. The Top Attack (Inc1) system should have improved lethality over previous generations of top attack systems. Once emplaced in a tactical obstacle, the system should be able to operate in a standby state for up to six months with the ability to transition to a active state for 30 days. The system's command and control features should operate up to a distance of 5 km and include the ability to plan the obstacle deployment and emplacement at mounted or command post positions, the ability to remotely command and control up to twelve (12) 150 m by 250 m fields of Top Attack systems, the ability to provide safety authoritative information remotely, and the ability to communicate with Army Tactical Command and Control (C2) Systems for a full network capability (Inc3) to the Army Common Operating Environment (COE). In addition, the hand-emplaced top attack system should be capable of being rapidly emplaced, recoverable, and reusable. To enable future operational needs the Top Attack munition design should consider compatibility with delivery platforms such as 155mm tube artillery, developmental Long-Range Precision Fires (LRPF), robotic ground vehicle platforms, current and future vertical lift (FVL) aircraft, unmanned aerial aircraft and fixed wing aircraft. REQUIRED TOP ATTACK CAPABILITIES The Top Attack (Inc1) system shall provide a lethal obstacle capability sufficient to shape terrain by disrupting enemy maneuver and defeating threat forces. The Top Attack (Inc1) system shall be capable of autonomously engaging threat vehicles, be DoD policy compliant, and be remotely controlled in order to provide maneuver commanders with maximum operational flexibility. The Top Attack (Inc1) system shall engage enemy vehicles with a 50 m minimum standoff with sufficient threat of damage or destruction. The Top Attack (Inc1) system shall adhere to Army doctrine and operate within the boundaries of the obstacle field. Standby state for up to six months with the ability to transition to an active state for 30 days. The capability to plan the obstacle deployment and emplacement using a device operated at mounted or command post positions. Capable of remotely commanding and controlling up to twelve (12) 150 m by 250 m fields. Command and Control of an obstacle up to a distance of 5 km during operations Data transmission shall be protected with NSA approved encryption Display of authoritative safety information on C2 devices The system shall utilize munitions that can be leveraged to support a long term Common Anti-Vehicular Munition (CAVM) acquisition approach, suitable for delivery by artillery, or missile, or aircraft while minimizing changes. The Top Attack (Inc1) system shall be designed to be maintainable and supportable with the ability to update software accordingly. The emplacement of individual Top Attack (Inc1) components shall not require more than two (2) Soldiers (84lbs) per item The system should accommodate Modular Open Systems Approach (MOSA) where feasible. A prototype system shall be developed and delivered within two (2) years of contract award. It is desired that the prototype system shall have a Technology Readiness Level (TRL) greater than TRL 4 at contract award as well as the ability to rapidly mature to a TRL 7 within two (2) years. Must be capable of conducting quality testing starting two (2) years after contract award for a period of one (1) year to support US Government Materiel Release process. REQUIRED FULL NETWORK CAPABILITIES Compatibility with Army Tactical Command & Control (C2) Systems with communication ranges up to 300 km to and from the obstacle Compatibility with the Army Common Operating Environment OTHER INFORMATION The system developer will have the opportunity to participate in two Soldier Touch Points in the first two (2) years after contract award to refine design. The manufacturer should be capable of demonstrating Top Attack (Inc1) article qualification tests after two (2) years and within three (3) years after contract award. The manufacturer should be capable of meeting first Top Attack (Inc1) article within four (4) years after contract award. Additional Information Your response to this survey/sources sought notice, including any capabilities statement, shall be electronically submitted, within 30 calendar days from the date of this publication, to the CCNJ Contracting Officer, Morgan Ziatyk, and Contract Specialist, Edward Gorsky in either Microsoft Word or Portable Document Format (PDF), via email at morgan.f.ziatyk.civ@mail.mil and edward.a.gorsky.civ@mail.mil. The submission shall reference - Sources Sought for Top Attack, Close Terrain Shaping Obstacle in subject line of the e-mail and on all enclosed documents. Information and materials submitted in response to this request WILL NOT be returned. DO NOT SUBMIT CLASSIFIED MATERIAL. This survey/sources sought notice is not a procurement action, but simply an inquiry among potentially interested organizations. There will be no compensation by the Government for your response to this questionnaire. See attached document for full survey/sources sought notice.

More opportunities from Department Of Defense → W6QK Acc-Pica

Same awarding agency

NAICS: 541511
Federal
Software Integration and Interoperability ServicesThe contract awards services to maintain and enhance associative interfaces between ABAQUS and leading third-party CAD tools including Pro/ENGINEER, CATIA, and Wave6, ensuring seamless data exchange and workflow integration for engineering simulation users. The work focuses on sustaining existing interoperability capabilities while advancing functionality to support evolving software versions and user requirements, with an emphasis on reliability, performance, and user experience across multi-platform environments. This effort supports defense-related engineering workflows by bridging design and analysis ecosystems critical to product development and simulation fidelity. The contract is classified as a subcontract under NAICS code 541511 for custom computer programming services, issued by the Department of Defense through its W6QK Acc-Pica agency, with performance required in Waltham, Massachusetts, 02451. Although details such as solicitation numbers and point of contact are not provided, the posting date of May 14, 2026 indicates the agreement is anticipated to commence following a future competitive process. The scope demands deep technical expertise in CAE software architecture, API development, and cross-platform integration to ensure continued compatibility and functionality between industry-standard design tools and ABAQUS simulation solutions.
Custom Computer Programming Services

POSTED

5 months ago

DEADLINE

N/A
View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS