Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Touch Screen Control & Digital Interface System

Active

Federal

Response Deadline09/04/2026, 03:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract, managed by DLA Maritime - Puget Sound for the Department of Defense, involves the supply and integration of a control interface for power packs used by prime contractors. The scope of work includes the development and installation of a touch screen HMI, a digital amperage meter display, and push-button activation for AC/HWDC magnetization and demagnetization. Additionally, the provider must integrate a remote control pendant with a 15 foot cable and ensure all components are compatible with 460-volt, 60 Hz power systems. The final deliverable consists of a fully programmed and wired control panel along with the remote pendant. This opportunity is designated as a Total Small Business Set Aside under NAICS code 334519, with the place of performance located in Bremerton, Washington.

General Info

DLA Maritime subcontract for power pack control interface supply and integration in Bremerton.

Agency

Department Of Defense → DLA Maritime - Puget SoundView Agency

NAICS

334519 - Other Measuring and Controlling Device ManufacturingView NAICS

Place of Performance

Bremerton, WA, 98314, USA

Set-Aside

SBA

Documents

This scope was carved out of SPMYM226Q0204.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

POWER PACKS

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedSep 2

subcontract

Response DeadlineSep 4

Submission deadline

Response Deadline

09/04/2026, 03:00:00 PM UTCin about 13 hours

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA Maritime - Puget Sound

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → DLA Maritime - Puget Sound

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies and integrates the control interface for power packs for prime contractors on Department of Defense projects. Develops and installs a touch screen HMI, integrates a digital amperage meter display, and configures push-button activation for AC/HWDC magnetization and demagnetization. Integrates a remote control pendant with a 15 ft cable. Must be compatible with 460-volt, 60 Hz power systems. Delivers a programmed and wired control panel and remote pendant.

Similar Contracts

Same NAICS industry code

THERMOSTAT, FLOW CONTRO

Solicitation # SPE4A7-26-T-714S

This contract is for the procurement of flow control thermostats under NSN 6685013680419, identified as critical application items with associated part numbers from Caterpillar Inc and Oshkosh Defense LLC. The total quantity requested is 425 units, divided across three delivery locations: DLA Distribution Barstow, DLA Distribution Albany, and DLA Distribution New Cumberland. The required delivery date is January 27, 2027, with a need ship date of March 2, 2027, and a delivery window of 171 days. The agreement specifies strict quality and packaging standards, requiring compliance with MIL-STD-129 for marking, MIL-STD-2073-1E for packaging, and RP001 for palletization. Sampling and inspection must follow MIL-STD-1916 or ASQ H1331, with inspection and acceptance occurring at the destination. The contract is a total small business set-aside and mandates that all items be delivered FOB Origin.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 9 hours ago

DEADLINE

GAGE, PRESSURE, DIAL IND

Solicitation # SPE4A5-26-T-404Q

This contract is for the procurement of dial indicating pressure gages, specifically Ashcroft Inc part number 45-1220A-04B-0-200PSI, under NSN 6685011962150. The order consists of two line items, each for a quantity of one unit, to be delivered to Assault Craft Unit ACU 2 in Virginia Beach, Virginia. Delivery is required within 20 days of order, with a required delivery date of August 28, 2026. The agreement mandates strict adherence to DLA packaging and marking standards, including MIL-STD-129 and MIL-STD-2073-1E, with a specific requirement to mark the items as delicate instruments. Quality assurance will be managed through sampling methods such as MIL-STD-1916 or ASQ H1331. Additionally, the contract prohibits the intentional addition of mercury or mercury-containing compounds in the hardware, preservation, or packaging, except where functionally required and specified.

ASC SUPPLIER OPER OEM DIVISION

POSTED

about 9 hours ago

DEADLINE

CONTRACTOR FIRST ARTIC

Solicitation # SPE4A5-26-T-405F

This contract, identified as SPE4A5-26-T-405F, is a total small business set-aside for the procurement of 253 units of Tempera transmitters under NSN 6685011122334. The primary delivery requirement is set for 154 days after order, with a need ship date of November 15, 2026, and an original required delivery date of February 18, 2027. The items are to be delivered FOB Origin to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The agreement includes a First Article Test requirement to ensure quality standards are met before full production. Packaging and marking must strictly adhere to MIL-STD-2073-1E, MIL-STD-129, and RP001 standards, specifically requiring the use of bags within ED boxes. Inspection and acceptance will occur at the point of origin, and the contract is managed by the ASC Supplier Oper OEM Division of the Department of Defense.

ASC SUPPLIER OPER OEM DIVISION

POSTED

about 9 hours ago

DEADLINE

ENCODER, SHAFT ANGLE TO

Solicitation # SPE7M5-26-Q-0980

This contract is a firm fixed price solicitation for one shaft angle to digital encoder, identified as a commercial off-the-shelf item from Welin Lambie Limited. The procurement is managed by the Department of Defense Active Devices Division under solicitation number SPE7M5-26-Q-0980, with a required delivery date of March 3, 2027, and a delivery window of 123 days after order. The agreement mandates strict adherence to DLA packaging requirements, including ASTM D3951 and MIL-STD-129 for marking and labeling. It specifically prohibits the intentional addition of mercury or mercury-containing compounds, except where functionally required by NAVSEA specifications. Inspection and acceptance will occur at the destination, with shipping directed to DLA Distribution San Joaquin in Tracy, California.

ACTIVE DEVICES DIVISION

POSTED

about 9 hours ago

DEADLINE

GAGE, PRESSURE, DIAL IND

Solicitation # SPE4A5-26-T-405D

This contract is for the procurement of dial indicating air pressure gage assemblies, identified by NSN 6685005279315 and part number M8348-A2. The total quantity requested is 38 units, split between two delivery locations in Tracy, California, and New Cumberland, Pennsylvania. The items must be manufactured in accordance with MIL-DTL-8348K(1) and are designated as critical application items. The agreement specifies a delivery timeframe of 295 days with a zero percent quantity variance. Quality assurance is governed by the DLA Master List of Technical and Quality Requirements, with sampling following MIL-STD-1916 or ASQ H1331. Packaging must comply with MIL-STD-129 and RP001, with specific instructions for hazardous and non-hazardous materials. Additionally, the contract includes a First Article Test requirement to ensure technical compliance before full production.

ASC SUPPLIER OPER OEM DIVISION

POSTED

about 9 hours ago

DEADLINE

INDICATOR, SIGHT, LIQUID

Solicitation # SPE7M0-26-T-072J

This contract, identified as SPE7M0-26-T-072J, is for the procurement of six liquid sight indicators, part number MS248, under NSN 6680014281601. The order is issued by the Department of Defense Maritime Supply Chain ESOC Buys for the Government of Israel Ministry of Defense. Delivery is required within five days of order, with a required delivery date of September 8, 2026. The agreement specifies strict quality and packaging standards, requiring compliance with MIL-STD-129 for marking and MIL-STD-2073-1E for packaging. Sampling must follow MIL-STD-1916 or ASQ H1331, with a zero-nonconformance requirement for acceptance. The contract is managed by Eaton Aerospace LLC and involves freight forwarding through G&B Packing Company in New Jersey for final delivery to Israel.

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 9 hours ago

DEADLINE

THERMOSTAT, FLOW CONTRO

Solicitation # SPE4A5-26-Q-0735

This contract is a firm fixed price solicitation for the procurement of 11 flow control thermostats, identified by NSN 6685-01-673-6553 and Volvo Penta part number 20903074. The items are designated as critical application items and must be delivered within 124 days after the order. Inspection and acceptance will take place at the destination, with shipping handled FOB origin to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The agreement mandates strict adherence to DLA technical and quality requirements, including specific packaging and marking standards such as MIL-STD-129 and RP001. Quality assurance is governed by MIL-STD-1916 or ASQ H1331, utilizing a zero-based sampling plan for acceptance. Additionally, the contract requires compliance with regulations regarding the removal of government identification from non-accepted supplies and specific documentation for source approval requests.

ASC SUPPLIER OPER OEM DIVISION

POSTED

about 9 hours ago

DEADLINE

TRANSDUCER, MOTIONAL

Solicitation # SPE4A5-26-T-405J

This contract is for the procurement of three motional transducers, identified by NSN 6695-01-633-0618 and part number 92999-105 from Parker-Hannifin Corporation. The order is designated as a critical application item with a delivery timeframe of 57 days and a required delivery date of March 29, 2028. Shipping is FOB Origin, with inspection and acceptance occurring at the destination, DLA Distribution Warner Robins in Georgia. The agreement mandates strict adherence to DLA packaging and marking standards, including MIL-STD-129 and MIL-STD-2073-1E. Quality assurance will be managed through sampling methods consistent with MIL-STD-1916 or ASQ H1331. Additionally, the contractor must comply with Cybersecurity Maturity Model Certification Level 2 self-assessment and other technical requirements listed in the DLA Master List. Item Unique Identification is not required for this specific order.

ASC SUPPLIER OPER OEM DIVISION

POSTED

about 9 hours ago

DEADLINE

PROBE, OIL SENSING

Solicitation # SPE4A5-26-T-404S

This contract is for the procurement of one oil sensing probe, identified by NSN 6680-01-535-1407 and part number OSPD0074 from Compass Water Solutions, Inc. The order is managed under solicitation SPE4A5-26-T-404S with a required delivery date of August 27, 2026, and a delivery window of 10 days after order. The item is to be delivered FOB Origin to the Composite Supply Support Activity at Schofield Barracks, Hawaii. The agreement mandates strict adherence to DLA technical and quality requirements, including specific packaging standards under MIL-STD-2073-1E and marking requirements per MIL-STD-129. Quality assurance will be conducted at the destination using sampling methods consistent with MIL-STD-1916 or ASQ H1331. The contract specifies a zero percent quantity variance and requires the removal of government identification from any non-accepted supplies.

ASC SUPPLIER OPER OEM DIVISION

POSTED

about 9 hours ago

DEADLINE

Replacement Two-Axis Force Transducer for Dynatest 1295 Pavement Friction Tester for Maintenance.

Solicitation # 601440000053680

The Texas Department of Transportation is seeking a replacement two-axis force transducer for a Dynatest 1295 Pavement Friction Tester used for maintenance. This solicitation, identified by number 601440000053680, is managed by the SLED organization and will be performed within the state of Texas. Interested respondents must submit their responses by the deadline of September 24, 2026, at 4:00 PM. All updates, addendums, and official communications regarding this procurement are posted on the designated website, and submissions received after the specified opening date and time will not be accepted. The primary point of contact for this requirement is Karina Flores.

Texas Department of Transportation

POSTED

about 11 hours ago

DEADLINE

Thermal Wave Imaging EchoTherm IR NDI System – Upgrade

Solicitation # 80NSSC26942350Q

NASA/NSSC is seeking an upgrade for the Thermal Wave Imaging EchoTherm IR NDI System to be performed at the NASA Glenn Research Center. The agency intends to award a sole source contract to Thermal Wave Imaging Inc under FAR 12.102(a), as they have been identified as the sole provider of this specific system. This procurement falls under NAICS code 334519 and follows the procedures prescribed in FAR Part 12 for commercial items and services. Interested organizations must submit capability statements and qualifications to the primary point of contact, Laura Quave, by 3:00 p.m. CST on September 8, 2026. These submissions will be used exclusively to determine if the procurement will be conducted on a competitive basis. It is important to note that the government is only requesting capability statements at this time and will not evaluate formal quotes in response to this notice.

NASA Shared Services Center

POSTED

about 14 hours ago

DEADLINE

Pulse Magnetizer (23584-270044)

Solicitation # WS5741846211

The Department of Public Works and Government Services is seeking a supplier to provide and install a Pulse Magnetizer for the Material Accelerating Platform at CanmetMATERIALS within Natural Resources Canada. This equipment will be utilized specifically for the manufacturing of rare earth element permanent magnets. The project is located in Ontario and falls under the Canadian Free Trade Agreement. Interested parties must submit their responses by the deadline of August 28, 2026, as late submissions will not be accepted. The procurement process is managed by contracting authority Sabrina Cheng under solicitation number WS5741846211. Businesses are also encouraged to indicate if they are interested in partnering with other companies for this opportunity.

Department of Public Works and Government Services

POSTED

about 21 hours ago

DEADLINE

More opportunities from Department Of Defense → DLA Maritime - Puget Sound

Same awarding agency

LAMINATED CLOTH

Solicitation # SPMYM226Q0197

This solicitation, numbered SPMYM226Q0197, is issued by the DLA Maritime Puget Sound for the procurement of laminated cloth. The opportunity is set aside for SBA Certified Women-Owned Small Businesses and requires delivery to be FOB Destination in Bremerton, Washington. Quotes must be submitted electronically via the SAM website or email by September 4, 2026, at 12 PM PST. To be considered responsive, bidders must provide a signed and completed solicitation including contractor information, cage codes, point of contact details, pricing, and lead times. Additionally, bidders must specify the manufacturer's name, address, and country of origin. While contractors may be required to have a current NIST SP 800-171 assessment per DFARS 252.204-7019, items identified as Commercial Off The Shelf are exempt from this requirement provided the information is disclosed during the solicitation period.

All Other Miscellaneous Textile Product Mills

POSTED

about 14 hours ago

DEADLINE

in about 17 hours

SHORE POWER CABLES

Solicitation # 26Q0217SOURCESSOUGHT

The Defense Logistics Agency Maritime Puget Sound is conducting market research to identify capable vendors for the procurement of shore power cable assemblies. The requirement includes two 150-foot DLO 3/0 assemblies with specific female straight connectors and Russell Stoll plugs, eight 150-foot enhanced THOF-500 cable assemblies, and four 220-foot enhanced THOF-500 cable assemblies. General Marine Products is listed as the Qualified Parts List manufacturer. This sources sought notice is assigned NAICS code 335999 and is not a formal solicitation for proposals. Interested parties must submit their organizational details and tailored capability statements to Tricia Wintersteen by September 8, 2026, at 10:00 AM PST. The results of this research will be used to determine the appropriate procurement method for these items.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 14 hours ago

DEADLINE

Industrial Crating and Shipping ServicesThis subcontract for Industrial Crating and Shipping Services is issued by the Department of Defense through DLA Maritime - Puget Sound for performance in Bremerton, Washington. The contractor is responsible for designing and building industrial-grade crates to protect heavy electrical equipment, specifically power packs, during transit for prime contractors on DoD projects. This process involves using heavy-duty pallets, industrial cushioning, and moisture barriers to ensure all packaging meets strict DoD shipping and receiving requirements. The opportunity is designated as a Total Small Business Set Aside under NAICS code 488490. It was posted on September 2, 2026, with a response deadline of September 4, 2026. The primary objective is the delivery of securely crated power packs that are fully prepared for shipment.

Other Support Activities for Road Transportation

POSTED

DEADLINE

in about 13 hours

460V Solid-State Power Supply & Switching SystemThis subcontract with the Department of Defense, specifically DLA Maritime - Puget Sound, involves the supply and installation of 460V solid-state power supply and switching systems for prime contractors. The technical requirements include the installation of switching components configured for 460-volt, 60 Hz power, the integration of a 115V/10Amp convenience outlet, and the implementation of flow-through cooling mechanisms for thermal management. All equipment must adhere to industrial electrical safety standards for 460V systems. The project is designated as a total Small Business Set Aside under NAICS code 335311 and will be performed in Bremerton, Washington. The contract was posted on September 2, 2026, with a response deadline of September 4, 2026.

Power, Distribution, and Specialty Transformer Manufacturing

POSTED

DEADLINE

in about 13 hours

OEM Replacement Parts for 31M Lathe Machine

Cutting Tool and Machine Tool Accessory Manufacturing

POSTED

DEADLINE

in about 15 hours

Solicitation # SPMYM226Q0205

Solicitation SPMYM226Q0205 is a firm fixed-price supply contract issued by DLA Maritime - Puget Sound for the procurement of two collaborative robot welding systems. The requirement specifically calls for one COBOT TIG Welder (GTAW) and one COBOT MIG Welder (GMAW), both manufactured by Melton Machine & Control Company. These systems must support various functions including tack-welding, weaving, and circular welds, and must feature force sensing and collision detection for enhanced safety. The procurement is a 100% total small business set-aside under NAICS 333992, with a requested delivery date of October 15, 2026, to Bremerton, Washington. Offers are due by September 4, 2026, at 11:00 AM PDT. To be considered, bidders must provide a standalone specification sheet in PDF format, complete all pricing and representations, and maintain active registration in SAM.gov. Award will be based on the most advantageous offer, considering price and other factors, including Buy American and HUBZone preferences. The contract requires electronic invoicing via Wide Area Workflow (WAWF) and mandates strict adherence to ASTM-D-3951 for packaging and MIL-STD-130 for unique item identification of equipment valued at $5,000 or more. Non-manufacturer contractors must maintain supply chain traceability documentation for five years following final payment.

Welding and Soldering Equipment Manufacturing

POSTED

DEADLINE

in about 16 hours

SOULTION, BRUSH PLATING

Solicitation # SPMYM226Q0207

This solicitation, issued by DLA Maritime - Puget Sound under solicitation number SPMYM226Q0207, is for brush plating solutions. The opportunity is a total small business set-aside under NAICS code 325998. Quotes must be submitted via email to the designated point of contact by September 3, 2026, at 3:30 pm PST. Delivery is required as FOB Destination to Bremerton, Washington. To be considered responsive, bidders must submit a signed and completed solicitation including contractor information, cage codes, point of contact details, pricing, lead times, and manufacturer information. Contractors required to implement NIST SP 800-171 must provide a current assessment not older than three years, though items classified as Commercial Off The Shelf are exempt provided this status is identified during the bidding process.

All Other Miscellaneous Chemical Product and Preparation Manufacturing

POSTED

DEADLINE

in about 1 hour

Solicitation # SPMYM226Q0204

Solicitation SPMYM226Q0204 is a request for quotes issued by the Department of Defense DLA Maritime Puget Sound for the procurement of Magnaflux 4,000 magnetizing amps AC/HWDC power packs, or an approved equal. This opportunity is designated as a total small business set-aside, specifically targeting women-owned small businesses under NAICS code 334519. The contract includes requirements for the power packs and associated crating fees, with a specified delivery date of December 28, 2026, and shipping terms set as FOB Destination Bremerton, Washington. To be deemed responsive, bidders must submit a fully completed and signed solicitation packet via email or fax to the primary point of contact, Jack Edwards. Required documentation includes the cage code, lead time, manufacturer name, and the country of manufacture. While contractors may be required to implement NIST SP 800-171 per DFARS 252.204-7019, items identified as Commercial Off The Shelf are exempt from this requirement. Quotes must be submitted through the SAM website or directly to the contracting officer by the deadline of September 4, 2026.

Other Measuring and Controlling Device Manufacturing

POSTED

DEADLINE

in about 22 hours

LATHE SPINDLE CLUTCH

Solicitation # SPMYM226Q0208

Solicitation SPMYM226Q0208 is a request for quote from DLA Maritime Puget Sound for a lathe spindle clutch and related components required for the repair of a TRF Shop 31M Lathe Machine. This is a small business set-aside procurement with an estimated value between 15,000 and 350,000 dollars. Due to safety requirements and the need for exact form, fit, and function, the requirement is designated as a sole source for OEM parts manufactured by LeBlond Ltd. The delivery terms are FOB Destination Silverdale, Washington, and the contractor must provide the manufacturer's name, address, and country of origin. To be considered responsive, offerors must submit a signed and completed solicitation via email to the primary point of contact by September 4, 2026, at 10:00 AM PST. Key requirements include providing a lead time, unit pricing, and a current NIST SP 800-171 assessment unless the items are identified as Commercial Off The Shelf. Packaging must comply with ASTM-D-3951 and MIL-STD-130 for unique item identification. Invoicing must be processed electronically through Wide Area Work Flow, and the government will evaluate offers based on technical acceptability and price, considering PPIRS-SR risk ratings.

Machine Tool Manufacturing

POSTED

DEADLINE

in about 16 hours

8010 FIRE SYSTEM BOOSTER PUMP UNITS

Solicitation # SPMYM226Q0103PRESOLICITATION

DLA Weapons Support Puget Sound is seeking a firm-fixed-price contract for ten 8010 fire system booster pump units, specifically Balco part number GBSLUCK 1029 or an approved equal. This procurement is designated as a 100 percent small business set-aside and will follow commercial and simplified acquisition procedures. The final delivery is set as FOB Destination to Silverdale, Washington. The solicitation, numbered SPMYM22-0103, is expected to be posted around September 8, 2026, on SAM.gov. To be considered responsive, bidders must submit a signed and completed solicitation via email or fax, providing detailed specifications for any equal-to submissions. While NIST SP 800-171 compliance is generally required for awardees, items identified as Commercial Off The Shelf are exempt, provided this information is submitted to the contracting officer during the solicitation period.

Measuring, Dispensing, and Other Pumping Equipment Manufacturing

POSTED

DEADLINE

Supply of Setting Rings (2.4" and Other Sizes)This subcontract, issued by the Department of Defense through DLA Maritime - Puget Sound, requires the supply of 14 precision setting rings designed for the calibration and verification of TESA/Brown & Sharpe internal micrometers. The order specifically includes a 2.4 inch ring and requires all units to be compatible with the 599-281 series system while providing certified dimensional accuracy. The contract is designated as a total Small Business Set Aside under NAICS code 332212. Performance for this requirement will take place in Bremerton, Washington, with the solicitation posted on August 10, 2026.

Hand and Edge Tool Manufacturing

POSTED

DEADLINE

Supply of TESA/Brown & Sharpe Intrimik Internal Micrometers (0.7"–7.0")This subcontract, issued by the Department of Defense through DLA Maritime - Puget Sound, involves the procurement of 29 TESA/Brown & Sharpe Intrimik precision internal micrometers. These analog tools, ranging from 0.7 to 7.0 inches, are designed under the ABBE principle to ensure high-accuracy measurements and will serve as direct replacements for existing 599-281 series tools within PSNS toolrooms and calibration laboratories. The contract is designated as a total Small Business Set Aside under NAICS code 332212. Performance of the contract will take place in Bremerton, Washington, with the official posting date set for August 10, 2026.

Hand and Edge Tool Manufacturing

POSTED

DEADLINE