This Solicitation opportunity from Department Of Defense was posted on April 30, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.
TOURNIQUET, NONPNEUM
Contract Overview
Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.
Active Opportunities Like This One
AI Contract Overview
The contract pertains to the procurement of a non-pneumatic junctional tourniquet kit, designated as a SJT with bag, intended for emergency hemorrhage control in combat or trauma settings. Each unit includes a nylon bag with MOLLE-compatible attachments and internal storage pockets containing one SJT belt, two target compression devices (TCDs), one hand pump, one extender, one strap, a printed instruction for use (IFU), and an instructional DVD. The item is regulated by the FDA, and buyers must confirm product compliance through a referral in EBS, providing bidder and manufacturer details including part number 1880-93102D from Bound Tree Medical LLC. The unit of issue is each (EA), with delivery required within 20 days after award to the delivery point at Rutland Air Force Residential Center in Rutland, Vermont, under FOB Destination terms. No quantity variance is permitted, and inspection and acceptance occur at the destination. All packaging must comply with Medical Marking Standard No. 1, which supersedes MIL-STD-129 for medical acquisitions, and must meet ASTM D3951 unless overridden by the DLA Master List of Technical and Quality Requirements. Palletization must follow RP001 guidelines, and shipments must be traceable via commercial carriers—parcel post is prohibited. The NSN is 6515-01-646-2617, and the solicitation number is SPE2DS-26-T-036J with a response deadline of May 6, 2026. The contract incorporates stringent cybersecurity and data protection requirements, particularly DFARS 252.204-7012 and 252.204-7020, mandating compliance with NIST SP 800-171 for safeguarding controlled defense information, requiring a Basic or higher assessment submitted to the Supplier Performance Risk System. Subcontractors must also meet these cybersecurity obligations, and the prime contractor bears full responsibility for flow-down compliance. Hazardous materials must be labeled per 29 CFR 1910.1200, and radioactive materials require advance notification in accordance with MIL-STD-129. All packaging and marking must include the NSN, unit of issue, quantity per unit pack, and other data defined in the contract. The contractor must maintain current representations in SAM, including UEI
General Info
Agency
NAICS
Place of Performance
USASet-Aside
Timeline
Submission Closed
Organization & Contact Information
Full Description
TOURNIQUET KIT,JUNCTIONAL COMPRESSION
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
SAM JUNCTIONAL TOURNIQUET WITH BAG<(>,<)>
THE TARGET COMPRESSION DEVICE (TCD) IS PLACED
AT OR PROXIMAL TO THE INJURYSITE AND INFLATED
UNTIL THE BLEEDING STOPS; TWO TCDS CAN BE USED
TO OCCLUDEBLOOD FLOW BI-LATERALLY IF NEEDED;
EACH MODULE CONTAINS (1) NYLON BAG WITHMOLLE
AND INTERNAL STORAGE POCKETS FOR THE FOLLOWING,
(1) SJT BELT, (2)TCDS,(1) HANDPUMP, (1)
EXTENDER, (1) STRAP, (1) PRINTED IFU AND (1)
INSTRUCTIONAL DVD
.
UNIT OF ISSUE EACH, EA
.
BIDDER SHALL SPECIFY SOURCE AND
PART NUMBER BEING SUPPLIED.
.
This device or drug is regulated by the FDA. Note to Buyers: The contracting official shall send a referral in EBS to the product specialist for confirmation. Please include bidder name and bidder contact information, manufacturer name, manufacturer part number, and item description.
APPLICABLE TO ALL MEDICAL ACQUISITIONS:
PACKAGING AND PACKING SHALL BE COMMERCIAL AS SPECIFIED IN THE PROCUREMENT DOCUMENT.
EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED IN A SUITABLE SEALED UNIT CONTAINER CAPABLE OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR BREAKAGE.
UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT THE LOWEST RATE, TO POINT OF DELIVERY CALLED FOR IN THE CONTRACT OR ORDER.
MATERIAL MUST BE MARKED IAW MEDICAL MARKING STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES TO MIL-STD-129.
SPE2DS-26-T-036J
SECTION B
COPIES OF MEDICAL MARKING STANDARD NO. 1
(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA
TROOP SUPPORT VIA EMAIL TO fssb@dla.mil. MMS NO. 1 IS ALSO AVAILABLE ONLINE AT: https://www.dla.mil/Logistics-Operations/Packaging/
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
BOUND TREE MEDICAL LLC 8M694 P/N 1880-93102D
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7016577834 0001 EA 1.000
NSN/MATERIAL:6515016462617
DELIVERY (IN DAYS):0020
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
BULK BREAK POINT:
W18GSW
W6KH RUTLAND AFRC
2143 POST RD
RUTLAND VT 05701-9104
US
SHIP BY TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
SPE2DS-26-T-036J
SECTION B
PR: 7016577834 PRLI: 0001 CONT’D
W91JH9
0424 EN CO CO AA REAR DET
2143 POST ROAD
RUTLAND VT 05701-9104
US
MARKFOR
W91JH9
0424 EN CO CO AA REAR DET
2143 POST ROAD
RUTLAND VT 05701-9104
US
M/F: (TCN) W91JH961180057
RDD:
PROJ: TP 3
SUPP ADD: W906CN SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 13
DIC: A0A DIST: ADV: 2A FC: MT
Need Ship Date:00/00/0000 Original Required Delivery Date:05/04/2026
SPE2DS-26-T-036J NSN/Part Number: 6515-01-646-2617 Quantity: 1 EA Purchase Request: 7016577834QTY: 1 Delivery: 20 days ADO
More opportunities from Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF
Same awarding agency
Find Active Opportunities Like This
Get AI-powered intelligence on the opportunities still open
Every page of the solicitation package shredded into a compliance breakdown
AI-powered matching based on your capabilities and past performance
Competitor and incumbent history on the requirement
Automated alerts on amendments, Q&A deadlines, and award
Join 650+ contractors already using CLEATUS
