This Government Contract opportunity from Oregon was posted on May 1, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Towable Hazmat Spill Response Trailer Fabrication

Closed

State & Local

Submission Closed05/15/2026, 10:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 336212

New

SLED

Custom Testing Trailer Design and FabricationThe contract calls for the design, engineering, and fabrication of a custom trailer specifically configured to house a Falling Weight Deflectometer system, ensuring full structural integrity and compliance with transport safety standards. The trailer must be engineered to securely accommodate the sensitive FWD equipment while withstanding the stresses of highway travel and field operations, with emphasis on vibration control, load distribution, and environmental protection. All phases of development, from initial conceptual design through final assembly and testing, must adhere to industry best practices and functional requirements dictated by transportation testing protocols. The project is classified as a subcontract under NAICS code 336212, indicating focus on motor vehicle body manufacturing, and is solicited by the Texas Department of Transportation. Responses are due by August 12, 2026, with work anticipated to support state infrastructure assessment initiatives. The trailer will be used in field applications across Texas, requiring durability, regulatory compliance, and seamless integration with existing FWD testing procedures. While the place of performance and specific delivery location are not detailed, the system must be transport-ready and operational under varied climatic and road conditions throughout the state.

Texas Department of Transportation

POSTED

DEADLINE

Dump Trailer Supply and DeliveryThe Texas Department of Criminal Justice is seeking a qualified supplier to procure and deliver a fully compliant dump trailer designed to meet its specific operational standards. The contract requires the trailer to be built to exact specifications that ensure durability, safety, and compatibility with existing fleet systems used in TDCJ facilities. All components must adhere to applicable state and federal regulations, with an emphasis on reliability under heavy-use conditions typical of correctional infrastructure maintenance and material transport. The procurement is structured as a subcontract under NAICS code 336212, indicating the focus on truck and trailer manufacturing, and the solution must be capable of seamless integration into existing workflows without requiring extensive modifications. Responses are due by July 28, 2026, with the solicitation posted on July 13, 2026, providing a targeted window for interested vendors to prepare and submit proposals. The place of performance and delivery location are not specified in detail, but the trailer must be operational within TDCJ’s statewide network of facilities. The procurement is not subject to a specific set-aside designation, meaning all eligible contractors may compete. The contract is managed through the Texas SmartBuy portal, and vendors are expected to fully understand TDCJ’s operational environment, including any security, maintenance, or logistical constraints that impact trailer usage. Successful bidders will be required to demonstrate compliance, quality control processes, and the ability to meet delivery timelines without disruption to ongoing institutional operations.

Texas Department of Criminal Justice

POSTED

DEADLINE

Dump TrailerThe Texas Department of Criminal Justice is soliciting bids for the procurement of dump trailers under solicitation number IW258797, with the request posted on July 13, 2026, and responses due by July 28, 2026. This procurement is aimed at acquiring equipment essential for operational logistics within the state correctional system, and the place of performance is designated as Texas. The solicitation is managed under the SLED classification, indicating it is targeted toward state, local, or educational entities, with no set-aside provisions specified. Nuvia Gallegos-Ruiz serves as the primary point of contact, reachable via phone at 936-437-3887 or email at Nuvia.Gallegos-Ruiz@tdcj.texas.gov for inquiries related to the bid process. All responses must be submitted through the Texas SmartBuy portal at the provided URL, and bidders are expected to comply with all procurement requirements outlined in the full solicitation document.

Texas Department of Criminal Justice

POSTED

DEADLINE

23--WY AL GL SE SPILL PREVENTION TRAILERSThe Bureau of Reclamation’s Wyoming Area Office is seeking three new enclosed cargo spill prevention trailers under a total small business set-aside solicitation issued by the Department of the Interior’s Great Plains Regional Office. The trailers must meet stringent technical specifications including a 16-foot plus V-nose length, 96-inch wall-to-wall interior width with a minimum of 83 inches between wheel wells, and a 78-inch minimum interior height. Constructed with .080 Polycore or equivalent composite siding, Thermocool-insulated ceiling, and 15-inch minimum tires, each trailer must have a Gross Vehicle Weight Rating of approximately 7,000 pounds, with a payload capacity of 4,200 pounds. Essential features include a 36-inch minimum side door, a rear ramp door with dual cable assist and 4,500-pound minimum capacity, DOT-compliant LED lighting, a 7-way round plug wiring system, a 2-5/16 inch hitch coupler, and a minimum of four D-ring tie-downs. All trailers must comply with federal and state DOT standards and be designed for highway use. Quotations must include specification sheets and drawings documenting compliance; failure to submit these renders the response non-responsive. The procurement follows a Lowest Price Technically Acceptable evaluation methodology, with technical acceptability serving as a pass/fail gate. The contract is a firm-fixed price agreement requiring delivery of all three trailers to 205 Chamberlain Rd., Mills, WY 82644 by October 1, 2026, under F.O.B. Destination terms. Deliveries are restricted to business hours Monday through Friday, excluding federal holidays, and contractors must notify the point of contact at least three days in advance of arrival. All offerors must maintain active SAM registration with a unique entity identifier and CAGE code and comply with FAR and DIAR clauses covering whistleblower rights, prohibitions on confidentiality agreements, system maintenance, subcontractor exclusion protections, trafficking in persons, sustainable products, and the prohibition on contracting with inverted domestic corporations. The solicitation also incorporates FAR 52.212-3 and 52.212-5 as attachments for representations and certifications, mandating that small business offerors self-certify their status under relevant SBA programs. Pricing must be presented for all three line items and remain valid for 90 days. Payment is governed by the U.S. Treasury’s Invoice Processing Platform,

Great Plains Regional Office

POSTED

DEADLINE

Dry Van TrailerThe Texas Department of Criminal Justice is seeking bids for the procurement of dry van trailers through solicitation IW240945, which was posted on July 10, 2026, with a response deadline of July 24, 2026, at 9:00 PM Eastern Time. The requirement is for a single purchase order to acquire dry van trailers to support operational needs, with performance expected to occur within the state of Texas. The solicitation is issued under the state-level government procurement framework, classified under SLED, and there is no set-aside designation specified for small or disadvantaged businesses. Primary contact for inquiries is Nuvia Gallegos-Ruiz, reachable via phone at 936-437-3887 or email at Nuvia.Gallegos-Ruiz@tdcj.texas.gov. All proposals must be submitted through the Texas SmartBuy portal, and bidders are expected to comply with all terms and conditions outlined in the full solicitation document available at the provided UI link.

Texas Department of Criminal Justice

POSTED

4 days ago

DEADLINE

in 10 days

AI Contract Overview

A custom 12 ft x 6 ft road-legal trailer is to be designed and fabricated with a minimum payload capacity of 1,500 lbs, fully compliant with DOT regulations. The trailer must include a robust structural framing system, a matching axle and suspension, full lighting and braking systems, and a certified hitch assembly, all engineered for safe and reliable operation on public roads. The project is classified under NAICS code 336212 for trailer manufacturing and is issued as a subcontract opportunity under the Oregon Procurement/Contracting agency, with performance required in Happy Valley, Oregon, zip code 97015. Bidders must submit their proposals by the deadline of May 15, 2026, at 10:00 PM Pacific Time, with no set-aside provisions specified. The trailer will serve as a mobile platform for hazmat spill response, requiring attention to durability, regulatory compliance, and operational readiness under field conditions.

General Info

Design and fabricate a DOT-compliant 12x6 ft hazmat spill response trailer, 1,500 pounds capacity.

Agency

Oregon → Procurement/contractingView Agency

NAICS

336212 - Truck Trailer ManufacturingView NAICS

Place of Performance

Happy Valley, OR, 97015, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseClosed

PostedMay 1

subcontract

Response DeadlineMay 15

Deadline has passed

Submission Closed

05/15/2026, 10:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyOregon → Procurement/contracting

ContactsNo contacts available

OfficeN/A

Organization / Agency

Oregon → Procurement/contracting

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Design and fabricate a custom 12 ft x 6 ft road-legal trailer with 1,500 lbs payload capacity, including structural framing, axle, suspension, lighting, braking, and hitch compliant with DOT regulations.