This Solicitation opportunity from Department Of Defense was posted on July 22, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

TRANSDUCER, FORCE LI

Closed

SPE4A6-26-T-09CBFederal

Submission Closed07/30/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 334511

New

Federal

Supply of UAS Speed Controllers (ESC)

POSTED

DEADLINE

Supply of FPV Flight Controllers (STM32H7)

POSTED

DEADLINE

Lightweight Handheld CUAS Hardware Provider

POSTED

DEADLINE

CEIA Open Gate Weapon Detection System Supply

POSTED

DEADLINE

70--PROCESSOR,DISPLAY A, IN REPAIR/MODIFICATION OF

Solicitation # N0038326QNB29

This contract is for the procurement of 17 units of a flight critical display processor under NSN 7R-7010-015222097-LC, with delivery terms set as FOB Origin. Due to the critical nature of the part and the fact that essential technical data and manufacturing knowledge are held by specific sources, the government requires engineering source approval from the design control activity to ensure quality. The government intends to negotiate with a single source under FAR 6.302-1, though other responsible sources may submit capability statements or proposals within the specified timeframe for consideration. Prospective bidders who are not already approved sources must submit detailed information as outlined in the NAVSUP Weapon Systems Support Source Approval Information Brochures. Failure to provide the required data or proof of a pending approval request will result in the proposal not being considered for award. The government maintains the discretion to proceed with a non-competitive award based on fleet support needs if new source approvals cannot be processed in time to meet operational requirements.

Navsup Weapon Systems Support

POSTED

DEADLINE

Thermal Imaging System

Solicitation # SPRDL1-26-R-A035

This pre-solicitation issued by the DLA Land Warren under solicitation number SPRDL1-26-R-A035 is for the procurement of Thermal Imaging Systems, identified by NSN 5855-01-536-9647 and part number 512991310-2. The contract requires a minimum quantity of 26 units with a maximum ceiling of 558 units, with a delivery due date on or about October 31, 2026. Shipping is designated as FOB Destination, and the place of performance is located in New Cumberland, Pennsylvania. This opportunity is a total small business set-aside, meaning only offers from small business concerns will be considered. Interested parties must submit their responses by the deadline of September 24, 2026. Detailed solicitation documents and instructions for obtaining necessary drawings are available through the SAM.gov website.

POSTED

DEADLINE

736 SFS - Handheld Lightweight CUAS

Solicitation # FA524026QM116

Solicitation FA524026QM116 is a combined synopsis and request for quotes issued by the 36th Contracting Squadron, Department of the Air Force, for the procurement of a non-kinetic, portable, and lightweight handheld Counter-Unmanned Aerial System (C-UAS). This acquisition is a 100 percent Small Business Set-Aside under NAICS code 334511. The required system must feature rifle-like ergonomics, Android Team Awareness Kit (ATAK) compatibility, and the ability to detect drones up to 7 km across the 400 MHz to 6 GHz spectrum. The device must be capable of disrupting command, control, and GNSS signals to force drones to land or return to their origin. The contract will be awarded based on best value, evaluating both price and the offeror's ability to meet the specified salient technical characteristics. Interested small businesses must be active in the System for Award Management (SAM) and submit a two-volume proposal consisting of a price volume and a technical specifications volume. Responses are due by September 21, 2026. The successful contractor must deliver the system within 120 days after receipt of order to the designated location in Guam, with shipping terms set as FOB Destination. Payment will be processed electronically through the Wide Area WorkFlow (WAWF) system.

POSTED

DEADLINE

Multi-bank RTK GNSS Module

Solicitation # W911S226U4472

Solicitation W911S226U4472 is a Request for Quotation issued by the Department of Defense, W6QM Micc-Ft Drum, for 100 units of Here4 GNSS Modules. This acquisition is a Total Small Business Set-Aside and is designated as brand name or equal. The required modules must be new equipment and feature the U-Blox NEO F9P chipset with RTK capability. Technical specifications include support for the CAN protocol, JST-GH or JST-SH connectors, built-in anti-spoofing mechanisms, and multi-band reception for at least L1, L5, E1, and E5 signals. All products must be NDAA compliant. Quotes must be submitted exclusively through the PIEE Solicitation module to be considered responsive. Offerors are required to provide datasheets or specifications and must complete Attachment 1 regarding certifications and the country of origin. For products offered as equal, the vendor must provide the brand name, model number, and descriptive literature. The award will be granted to the responsible offeror whose proposal is most advantageous to the government based on price and technical factors. Delivery is preferred within 30 days on an F.O.B. destination basis.

POSTED

DEADLINE

13--AIR FLASK,TORPEDO

Solicitation # N0010423QUC40

This solicitation is for the procurement of torpedo air flasks under the Department of Defense, specifically through the Navsup Weapon Systems Support Mech. The contract requires the manufacture of items based on specific cage code designs and mandates strict adherence to MIL-STD packaging and IUID requirements. Key quality assurance terms include mandatory government source inspection and the requirement for awardees to be authorized sources, with distributors providing official OEM authorization letters to ensure traceability. The solicitation has undergone multiple amendments regarding the closing date and quantity, with the most recent update extending the response deadline to October 13, 2026, and adjusting the quantity to 10 units. All quotes must be submitted electronically to the designated point of contact and include detailed pricing, lead times, and CAGE information. Freight is established as FOB Origin, and the final award will be issued bilaterally, requiring written acceptance from the contractor.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Echodyne EchoShield Radar System

Solicitation # FA568226Q8034

The Department of the Air Force, 31st Contracting Squadron, is seeking a single Firm Fixed Price purchase order for the procurement of the Echodyne EchoShield Radar System to be delivered and assembled at Aviano Air Base, Italy. This acquisition is a Total Small Business Set-Aside and includes the purchase of four EchoShield radars in NATO Green, one Gen 1 Rapid Deployment Kit, and four software update and technical support packages for a duration of 36 months. The requirement also specifies a one-time assembly instruction block and system training for four to eight personnel at the destination. The EchoShield is a software-defined, cognitive 4D pulse-Doppler radar utilizing Metamaterials Electronically Steerable Antenna technology, operating in the Ku-band. It is designed for multi-domain operations such as counter-UAS and perimeter security, featuring a wide field of view and high angular tracking accuracy. The Rapid Deployment Kit must be packable into no more than three rugged transport cases. Award will be based on the most advantageous offer, considering technical capability, delivery terms, and past performance. Payment will be processed through the Wide Area WorkFlow system, although the government noted that funds are not presently available and no award will be made until they are secured.

FA5682 31 Cons (unit 6102)

POSTED

DEADLINE

PR23291 W8486-260708 Paper Chemical Agent Detector

Solicitation # WS5642984329

The Department of Public Works and Government Services, acting on behalf of the Directorate of Land Procurement for the Department of National Defence, has issued a Request for Information regarding a future Paper Chemical Agent Detector project. This solicitation, identified by number WS5642984329, seeks to identify industry interest and the technical capability of providers to meet specific project requirements. The performance of the contract is expected to take place within the National Capital Region. Interested parties must submit all required documentation by the deadline of September 22, 2026. The procurement process is categorized under NAICS code 334511 and is managed by the Government of Canada. Primary inquiries and submissions should be directed to the contracting authority, Stephen Van Den Hanenberg.

Department of Public Works and Government Services

POSTED

DEADLINE

Radar Set Subassembly Fabrication and Assembly

MARITIME SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 10 days

AI Contract Overview

This contract, issued under solicitation SPE4A6-26-T-09CB by the Defense Logistics Agency, calls for six units of a force transducer with part number 2586423 and NSN 6615-00-086-7995, supplied by approved vendors including Honeywell International Inc., Aero International LLC, and Moser Screw Machine Products Division. The item is classified as a critical application product and must comply with stringent technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, including specific packaging, marking, and inspection protocols. All supplies must conform to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, with special marking code 03-03 Method 50, and palletization in accordance with DLA packaging requirements. Sampling and inspection follow MIL-STD-1916 or ASQ H1331, Table 1, with zero non-conformances required unless otherwise stated, and attributes are assigned verification levels or AQLs as specified. The contract includes a separate first article test line item requiring one unit to be delivered for testing, with no separate charge assumed unless otherwise cited, and failure to address this line item may result in evaluation under the assumption of no additional cost. Delivery is due within 583 days from contract award, with FOB origin terms, and the item must be shipped to the DLA Distribution Depot at Tinker AFB, Oklahoma. The contract is a total small business set-aside under NAICS code 334511, with cybersecurity requirements governed by CMMC Level 2 self-assessment, though unique identification is waived per customer request. Measuring and test equipment must be calibrated and documented, and all data handling complies with covered defense information rules. The response deadline was July 30, 2026, with award anticipated for delivery starting January 10, 2027, and the original required delivery date set for September 7, 2027.

General Info

Six force transducers delivered to Tinker AFB by 2027, compliant with military standards and small business set-aside.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

334511 - Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument ManufacturingView NAICS

Place of Performance

3301 F AVE CEN REC BLDG 506 DR 22, TINKER AFB, OK, 73145-8000, USA

Set-Aside

SBA

Documents

(1)

RFQ SPE4A6-26-T-09CB for DLA Aviation Automated Simplified Acquisitions

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Timeline

PhaseClosed

PostedJul 22

Solicitation

Response DeadlineJul 30

Deadline has passed

Submission Closed

07/30/2026, 05:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → ASC COMMODITIES DIVISION

Contacts1 person available

OfficeUSA

Organization / Agency

Department Of Defense → ASC COMMODITIES DIVISION

View Agency Profile

Office AddressUSA

Contacts

KESHIA Mosley

contact@example.gov

+1 (555) 000-0000

Full Description

TRANSDUCER,FORCE LI
TRANSDUCER,FORCE LI
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RD002, COVERED DEFENSE INFORMATION APPLIES
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
RT001: MEASURING AND TEST EQUIPMENT
CRITICAL APPLICATION ITEM
HONEYWELL INTERNATIONAL INC. 07187 P/N 2586423
AERO INTERNATIONAL, LLC 0SML3 P/N 2586423
MOSER SCREW MACHINE PRODUCTS DIV 2N395 P/N 2586423
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
SPE4A6-26-T-09CB
SECTION B
PR: 7017487178 PRLI: 0001 CONT’D
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017487178 0001 EA 6.000
NSN/MATERIAL:6615000867995
DELIVERY (IN DAYS):0583
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: ORIGIN
ACCEPTANCE POINT: ORIGIN
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:53 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z
UNIT CONT:ZZ OPI:A
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:03 -03 Method 50
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
SW3211
DLA DISTRIBUTION DEPOT OKLAHOMA
3301 F AVE CEN REC BLDG 506 DR 22
TINKER AFB OK 73145-8000
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3211
DLA DISTRIBUTION DEPOT OKLAHOMA
3301 F AVE CEN REC BLDG 506 DR 22
TINKER AFB OK 73145-8000
US
Need Ship Date:01/10/2027 Original Required Delivery Date:09/07/2027
GOVERNMENT FIRST ARTICLE TEST – THE NUMBER OF UNITS SHOWN SIGNIFIES THE
TEST REQUIREMENT. SEE FAR CLAUSE 52.209-4 CITED IN SECTION A OF THIS
SPE4A6-26-T-09CB
SECTION B
PR: PRLI: CONT’D
SOLICITATION FOR THE ACTUAL QUANTITY REQUIRED.
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0002 0000000000 EA 1.000
NSN/MATERIAL:0001S00000052
DELIVERY (IN DAYS):0180
THIS LINE ITEM SIGNIFIES THE FIRST ARTICLE TEST REQUIREMENT (FAT). SEE
CLAUSES FOR INFORMATION CONCERNING THE FAT REQUIREMENT. OFFERS THAT DO
NOT CITE A PRICE FOR THIS LINE ITEM SHALL BE EVALUATED UNDER THE
ASSUMPTION THAT THERE IS NO SEPARATE CHARGE FOR THE FAT. IN THE EVENT
THE FAT REQUIREMENT IS WAIVED, NO AWARD WILL BE MADE FOR THIS LINE ITEM.
THE NUMBER OF UNITS SHOWN APPEARS AS “1 EA”. THIS QUANTITY SIGNIFIES
THE TEST REQUIREMENT. OFFERORS WILL FIND THE ACTUAL QUANTITY REQUIRED
BY THE GOVERNMENT FOR THE FAT LINE ITEM PER FAR 52.209-3 OR 52.209-4 IN
SECTION A OF THIS SOLICITATION.
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: ORIGIN
ACCEPTANCE POINT: ORIGIN
Need Ship Date:00/00/0000 Original Required Delivery Date:00/00/0000
SPE4A6-26-T-09CB NSN/Part Number: 6615-00-086-7995 Quantity: 6 EA Purchase Request: 7017487178QTY: 6 Delivery: 583 days ADO