Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

TRANSMITTER, PRESSUR

Active
SPE4A5-26-T-329EFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract pertains to the procurement of a single pressure transmitter, identified by NSN 6685-01-440-1844 and part number LD301-D31I-TU10-010-ZN, supplied by SMAR INTERNATIONAL CORPORATION. The item is designated as a critical application component with no shelf life requirement, and delivery is required within 66 days to the DLA Distribution facility in New Cumberland, Pennsylvania, under FOB origin terms with no variance allowed in quantity. All packaging must comply with MIL-STD-2073-1E and MIL-STD-129, adhering strictly to DLA packaging requirements, and must exclude any mercury or mercury-containing substances in preservation, packaging, or marking, in alignment with NAVSEA 5100-003D guidelines. The item is exempt from Unique Identification under DFARS 252.211-7003(c)(1)(i), and all material must be free of intentional mercury contamination except for narrowly defined functional uses like batteries or sensors, which must include secondary containment and shock proofing. Sampling and quality assurance protocols mandate use of MIL-STD-1916 or ASQ H1331, TABLE 1, or an equivalent zero-based sampling plan, with attribute verification levels assigned as VII for critical, IV for major, and II for minor characteristics, or corresponding AQLs of 0.1, 1.0, and 4.0. Any unspecified attributes are treated as major unless otherwise defined. Hazard communication is mandatory: Safety Data Sheets and OSHA-compliant hazard warning labels must be submitted for review and approval by qualified technical personnel prior to contract award, with copies retained in the contract file and forwarded to the DLA Aviation HMIRS office. Transportation logistics must follow DLAD Proc Notes C19 and C20, and the contract references the DLA Master List of Technical and Quality Requirements for all R- and I-coded specifications, with the revision in effect at the solicitation issue date controlling compliance. The unit of issue is each (EA), with a total contract value of $1.00, and the point of contact is Jamie Bonda of the ASC Supplier Operations OEM Division.

General Info

Single pressure transmitter procured, no mercury, strict packaging, 66-day delivery, $1.00 value, DLA New Cumberland.

Agency

Department Of Defense → ASC SUPPLIER OPER OEM DIVISIONView Agency

NAICS

334519 - Other Measuring and Controlling Device ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

SPE4A5-26-T-329E.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC SUPPLIER OPER OEM DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC SUPPLIER OPER OEM DIVISION
View Agency Profile
Office AddressUS
Contacts
Jamie Bonda
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
TRANSMITTER,PRESSUR
TRANSMITTER, PRESSURE
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS; AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA. PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
IDENTIFY TO: "SDS AND OSHA HAZARD WARNING/PRODUCT LABEL (HWL) ARE REQUIRED. THE SDS AND HAZARD WARNING LABEL MUST BE REVIEWED AND APPROVED BY CHEMISTS/TECHNICAL PERSONNEL BEFORE CONTRACT AWARD. THE APPROVED SDS AND LABEL MUST THEN BE PLACED IN THE CONTRACT FILE AND A COPY FORWARDED TO THE DLA AVIATION HMIRS OFFICE (VBA)."
SAMPLING: THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION, STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
SPE4A5-26-T-329E
SECTION B
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
THIS MATERIAL DOES NOT HAVE A SHELF LIFE REQUIREMENT
CRITICAL APPLICATION ITEM
SMAR INTERNATIONAL CORPORATION 0W4H7 P/N LD301-D31I-TU10-010-ZN
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017731632 0001 EA 1.000
NSN/MATERIAL:6685014401844
DELIVERY (IN DAYS):0066
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:BG CUSH/DUNN THKNESS:C
UNIT CONT:E5 OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
IP056: MERCURY OR MERCURY COMPOUNDS ARE PROHIBITED IN PRESERVATION,
PACKAGING, PACKING AND MARKING.
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
SPE4A5-26-T-329E
SECTION B
PR: 7017731632 PRLI: 0001 CONT’D
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:00/00/0000 Original Required Delivery Date:08/03/2026
SPE4A5-26-T-329E NSN/Part Number: 6685-01-440-1844 Quantity: 1 EA Purchase Request: 7017731632QTY: 1 Delivery: 66 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 334519
New
DIBBS
Precision Pressure Gage ManufacturingThe contract pertains to the manufacture and delivery of a precision pressure dial indicating gage, identified by NSN 6685-01-165-8961, built to meet strict military specifications. The required unit is modeled after P/N 11006 from 3D Instruments, LLC DBA Sierra, an approved supplier, ensuring compliance with performance, durability, and accuracy standards mandated for military applications. This is a subcontract opportunity designated as a Total Small Business Set-Aside under FAR 19.5, exclusively available to small businesses certified by the SBA, with the NAICS code 334519 indicating classification under Other Instrument Manufacturing. The procurement is managed by the ASC Commodities Division under the Department of Defense, with a response deadline of August 18, 2026, and the solicitation posted on August 4, 2026. Delivery locations and point of contact details are not specified in the provided data, but performance is expected to align with defense logistics requirements.
ASC COMMODITIES DIVISION

POSTED

about 18 hours ago

DEADLINE

in 13 days
View Details
NAICS: 334519
New
DIBBS
GAGE, DIFFERENTIAL, D
Solicitation # SPE4A6-26-T-02X7
This contract is for the procurement of two units of a differential dial indicating gage identified under NSN 6685-01-308-6925. The contract requires delivery within 145 days to the Defense Distribution Center at New Cumberland, Pennsylvania, with shipment FOB origin and inspection and acceptance occurring at destination. Packaging must comply with DLA packaging requirements per MIL-STD-2073-1E, including specific preservation, marking per MIL-STD-129 with a delicate instrument marking code, and a prohibition on mercury or mercury-containing compounds in any preserved or packaged hardware. The contract incorporates a detailed quality assurance program following MIL-STD-1916 or comparable sampling plans, with a strict zero-tolerance policy for nonconformance in the sample lot unless explicitly stated otherwise. The purchase request number is 7015657847, and all government identification is to be removed from non-accepted supplies. The solicitation and award process adheres to the technical and quality requirements set forth in the DLA Master List, current as of the solicitation or award date, ensuring compliance with relevant DFARS clauses, including the waiver of Item Unique Identification. The contract is overseen by the Department of Defense’s ASC Commodities Division, with a primary point of contact provided. All transportation and freight instructions conform to DLA directives, and the original required delivery date is July 2, 2027, with an initial ship date by August 23, 2026.
ASC COMMODITIES DIVISION

POSTED

about 18 hours ago

DEADLINE

in 2 days
View Details
NAICS: 334519
New
DIBBS
ADAPTER, GAGE
Solicitation # SPE4A5-26-T-321C
The contract pertains to the procurement of an Adapter, Gage with NSN 6685-00-274-5533 and part number 421371-1, manufactured by Enerpac Tool Group Corp under specification SPE4A5-26-T-321C. Nine units are required at a unit price of $9.00, with delivery due in 171 days FOB origin to DLA Distribution San Diego. The item is classified as a critical application item requiring physical identification and compliance with MIL-STD-129 marking standards. Packaging must adhere to MIL-STD-2073-1E, with specific preservation methods and unit containment codes, and palletization must meet DLA’s packaging requirements. Inspection and acceptance occur at the destination, with zero tolerance for non-conformances under sampling plans specified by MIL-STD-1916 or equivalent zero-based systems, unless otherwise designated. Attributes are assigned verification levels or AQLs per defined standards, and unspecied attributes are treated as major. Mercury and mercury-containing compounds are strictly prohibited except in exempted functional components such as batteries or instrument sensors, which must include secondary containment as per NAVSEA 5100-003D. Configuration changes require formal engineering change proposals or variance requests, and government identification must be removed from non-accepted supplies. Covered defense information provisions apply, and the contract explicitly excludes Item Unique Identification per DFARS 252.211-7003(c)(1)(i). The solicitation opened on August 4, 2026, with responses due August 12, 2026, and performance is directed under DLA’s authorized unit of issue system with full alignment to technical and quality requirements referenced from the DLA Master List.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334519
New
DIBBS
ADAPTER ASSEMBLY, COMPA
Solicitation # SPE4A5-26-T-321S
This contract specifies the procurement of an Adapter Assembly, Comparator, identified by NSN 6685-00-934-8642 and part number 3460-108-0120, with a quantity of four units. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revision control based on the solicitation or award date depending on the acquisition size. Packaging must comply with MIL-STD-2073-1E and DLA Packaging Requirements, including marking per MIL-STD-129 with no special markings required. The item is designated as a Critical Application Item, and mercury or mercury-containing compounds are strictly prohibited in any hardware, preservation, packaging, or marking materials except for specific functional applications such as batteries, fluorescent lights, sensors, or chemical reagents as defined by NAVSEA, with portable devices containing mercury requiring shock-proof construction and a secondary containment boundary. Sampling for inspection follows MIL-STD-1916 or a comparable zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively, and only zero non-conformances are acceptable unless otherwise stated. Delivery is FOB origin, with inspection and acceptance occurring at destination, and the item must be delivered within 171 days from the award date with zero tolerance for quantity variance. The destination is the DLA Distributor San Joaquin warehouse in Tracy, CA, with shipping details and transportation governed by DLAD Proc Notes C19 and C20. The original required delivery date is January 18, 2027, with a need ship date of January 31, 2027, and the contract was solicited under SPE4A5-26-T-321S with a response deadline of August 12, 2026.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334519
New
DIBBS
TRANSMITTER, LIQUID
Solicitation # SPE4A5-26-T-329X
This solicitation, identified as SPE4A5-26-T-329X, seeks quotes for a transmitter, liquid with NSN 6680-01-493-2030, quantity 19 units, requiring delivery within 751 days ADO. Offerors must provide quantity ranges due to fluctuating demand and frequent adjustments to purchase requests, enabling buyers to consolidate or reduce quantities without administrative delays or resolicitation, though this flexibility does not extend to Auto IDC. Bidders who anticipate submitting quotes after the closing date must file a “No Bid” on DIBBS with an anticipated quote date or reason for non-submission to prevent assumptions of non-procurability and reduce unnecessary follow-ups. Offers must comply strictly with federal restrictions on covered telecommunications equipment and services under FAR 52.204-24 and DFARS 252.204-7016, prohibiting the supply of restricted items. Domestic sourcing requirements under the Berry Amendment and Buy American Act apply, with the Berry threshold lowered to $150,000, mandating disclosure of any non-domestic materials and referencing specific DFARS clauses. Small business joint ventures must submit required certifications for applicable categories including small business, service-disabled veteran-owned, women-owned, economically disadvantaged women-owned, and HUBZone status. Vendors must register via DLA’s new Account Management & Provisioning System (AMPS) within two months to gain access to the Vendor Shipment Module; failure to do so will prevent shipping to DLA, and VSM WebServices users must update their schema by the April 23, 2025 deadline. Additive manufacturing is prohibited unless explicitly authorized, and any proposal including AM-produced items will be deemed non-eligible for award. All submissions must be made through DIBBS, with primary point of contact Anthony Nickens at anthony.nickens@dla.mil.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334519
New
DIBBS
TRANSMITTER, LIQUID
Solicitation # SPE4A5-26-T-329C
This solicitation, SPE4A5-26-T-329C, seeks quotations for a transmitter, liquid with NSN 6680-01-146-2367, in a quantity of 30 units, with a delivery requirement of 53 days after contract award. Offerors must provide quantity ranges in their quotes due to fluctuating demand and frequent adjustments to purchase requests, allowing the government to combine or reduce quantities without re-soliciting or increasing administrative burden, though this does not apply to Auto IDC. Offers must not include covered telecommunications equipment or services as prohibited under FAR 52.204-24 and DFARS 252.204-7016, and compliance with domestic sourcing restrictions including the Berry Amendment, Buy American Act, and related clauses is mandatory. The Berry Amendment threshold is now $150,000, requiring disclosure of any non-domestic materials used. Small business joint ventures must submit specific representations under FAR provisions 52.212-3 and 52.219-1 for applicable categories. All vendors must register through DLA’s new AMPS system within two months to access the Vendor Shipment Module and maintain shipping capability; those using VSM WebServices must update their internal schema by the specified date or lose access. Offers containing items made via additive manufacturing are ineligible for award unless prior approval is granted. Failure to submit a “No Bid” on DIBBS for anticipated post-deadline quotes may result in unnecessary follow-ups and assumptions of non-responsiveness. Fast Pay is not available under this solicitation.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334519
New
DIBBS
CONTRACTOR FIRST ARTIC
Solicitation # SPE4A5-26-T-321L
This contract specifies the procurement of a self-indicating bimetallic thermometer, with the exception of a 9/32-inch dimension shown in Figure 2 on page 16, which is to be deleted. The technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with versions controlled based on the solicitation or award date depending on acquisition type. The item must comply with stringent packaging, marking, and inspection standards including MIL-STD-2073-1E, MIL-STD-129, and MIL-PRF-23199, and must be palletized per DLA packaging requirements. Mercury and mercury-containing compounds are strictly prohibited in all aspects of the product, preservation, packaging, and labeling, except for functional uses in batteries, fluorescent lights, sensors, or instrument controls as explicitly allowed by NAVSEA, with additional containment requirements for any permitted mercury devices. Sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and all attributes are assigned verification levels or AQLs based on criticality. The item is designated as a critical application and must conform to the Technical Data Package revision A, Gen 1, per MIL-I-17244E and other referenced documents. A first article test requirement is included as a separate line item with one unit, priced at $1.00, but no award will be made if waived. Delivery is FOB origin, with a required delivery date of March 15, 2027, for 280 units, and a need ship date of January 29, 2026. The contract is a total small business set-aside, with inspection and acceptance occurring at origin, and shipment must be directed to the DLA Distribution facility in New Cumberland, Pennsylvania.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334519
New
DIBBS
RATIO UNIT, INDICATO
Solicitation # SPE4A5-26-T-327S
This contract, issued under solicitation SPE4A5-26-T-327S by the Department of Defense’s ASC Supplier Oper OEM Division, pertains to the procurement of 17 units of part number 177014T2 with NSN 6680-00-443-6552, identified as a critical application item from Simmonds Precision Products Inc. The requirement incorporates technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, identified by R or I codes, with compliance governed by the revision in effect on the solicitation issue date. Packaging and marking must strictly adhere to MIL-STD-2073-1E and MIL-STD-129 respectively, with no special marking required, and palletization must follow DLA packaging guidelines. Item Unique Identification is waived per the Service customer's request, but physical identification of bare items must still be applied per RQ017. Sampling must conform to MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances allowed unless specified otherwise, and testing equipment must meet RT001 standards. The contract mandates delivery to Hill AFB, Utah, FOB origin, with a delivery window of 263 days from the award date and a required ship date of May 17, 2026, though the original delivery requirement is set for October 20, 2027. Quality assurance procedures include zero tolerance for non-conformances during inspection at destination, and cybersecurity compliance requires a CMMC Level 2 self-assessment. The quantity is fixed at 17 units with no variance allowed, priced at $17.00 per unit, totaling $289.00. All documentation, transportation, and logistics procedures must align with DLA procedural notes C19 and C20, and the unit of issue is EA. The point of contact for inquiries is Linda Chatman, with the solicitation closed on August 12, 2026, following a posting date of August 4, 2026.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334519
New
DIBBS
SWITCH, LIQUID LEVEL
Solicitation # SPE4A5-26-T-324V
The contract pertains to the procurement of 10 units of a liquid level switch identified by NSN 6680-01-512-5543 under solicitation SPE4A5-26-T-324V, with delivery required within 171 days to the DLA Distribution San Joaquin facility in Tracy, California. All supplies must comply with the DLA Master List of Technical and Quality Requirements, which supersede other standards like ASTM D3951, and must be packaged per MIL-STD-129 and RP001 packaging guidelines. Sampling for quality assurance must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and critical, major, and minor attributes are to be verified at levels VII, IV, and II respectively. Mercury and mercury-containing compounds are strictly prohibited in or on the hardware except for defined exceptions such as functional use in batteries, fluorescent lamps, instruments, sensors, weapon systems, or specific chemical reagents approved by NAVSEA; portable devices containing mercury must include a secondary containment and be shockproof per NAVSEA 5100-003D. The unit of issue is each, with no tolerance on quantity variance, and inspection and acceptance occur at the destination. The delivery must be FOB origin, with a required ship date by January 31, 2027, and the original required delivery date is February 24, 2027. All packaging and labeling must adhere strictly to the referenced military standards, and transportation instructions are governed by DLAD Proc Notes C19 and C20.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334519
New
DIBBS
BEZEL, INSTRUMENT MO
Solicitation # SPE4A5-26-T-330R
The contract pertains to the procurement of a BEZEL, INSTRUMENT MOUNTING with part number 29551515 and NSN 6695016563835, under solicitation SPE4A5-26-T-330R, requiring 56 units at a unit price of $56.00, for a total value of $3,136.00. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions tied to either the solicitation issue date or award date depending on acquisition size, and all provisions must be adhered to as referenced. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stipulated; critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Physical identification and marking of the item must comply with RQ017 and MIL-STD-129, with no special marking required. Packaging must conform to MIL-STD-2073-1E, utilizing packaging code U, with preservative method 10, and unit containers marked as E5, and palletization must meet DLA packaging standards. The delivery destination is the DLA Distribution facility in New Cumberland, PA, with delivery due 171 days after award under FOB origin terms. Inspection and acceptance occur at the destination, with no variance permitted in quantity. The required ship date is January 31, 2027, with the original delivery target of December 12, 2026. Transportation and shipping instructions align with DLA procedural notes C19 and C20, and all units must be labeled and documented in compliance with ANSI X12 standards for unit of issue.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334519
New
DIBBS
TRANSMITTER, LIQUID
Solicitation # SPE4A5-26-T-322G
This contract specifies the procurement of a liquid quantity transmitter, identified by NSN 6680-01-208-5644 and part number 42234 from SETRA SYSTEMS, INC., under solicitation SPE4A5-26-T-322G. A total of two units are required to be delivered FOB origin within 171 days, with delivery addressed to the DLA Distribution facility in New Cumberland, Pennsylvania. Strict packaging compliance is mandated per MIL-STD-2073-1E and DLA packaging requirements, including special marking for delicate instrument handling and prohibition of mercury or mercury compounds in preservation, packaging, and marking. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and unspecified attributes are treated as major. The product must not contain intentional mercury except in approved functional components such as batteries or sensors as defined by NAVSEA, and portable fluorescent lamps must be shockproof with secondary containment. Configuration changes require formal engineering change proposals, and deviation requests must be submitted with offers. All technical and quality requirements are drawn from the DLA Master List of Technical and Quality Requirements, and cybersecurity compliance is enforced through CMMC Level 2 self-assessment. Only approved sources are acceptable, and non-cited offerors must obtain source approval from the design control activity prior to submission. The unit of issue is EA, with a total price of $2.00 per unit, and the contract includes zero variance tolerance on quantity.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334519
New
DIBBS
SWITCH, LIQUID LEVEL
Solicitation # SPE4A5-26-T-323J
This contract specifies the procurement of 25 units of a liquid level switch with NSN 6680-01-356-5927 and part number DE5-60 from INSINGER MACHINE CO, under solicitation SPE4A5-26-T-323J. Delivery is required within 171 days to the destination warehouse in Tracy, California, with FOB origin terms and no tolerance for quantity variance. The items must comply with stringent packaging standards per MIL-STD-2073-1E and marking requirements per MIL-STD-129, with no special marking codes applied. All packaging and handling must adhere to DLA’s packaging requirements, and the use of mercury or mercury-containing compounds is strictly prohibited in preservation, packaging, and marking processes, except for approved functional components like batteries or sensors as specified by NAVSEA. Portable devices containing mercury must include a secondary containment and be shockproof in accordance with NAVSEA 5100-003D. Sampling and inspection follow zero-defect criteria per MIL-STD-1916 or equivalent zero-based plans, with critical, major, and minor attributes assigned verification levels or AQLs as defined. Inspection and acceptance occur at the destination, and the contract enforces strict compliance with all referenced DLA technical and quality requirements incorporated by reference from the DLA Master List. The required delivery date is January 18, 2027, with a need ship date of January 31, 2027, and all transportation protocols must follow DLAD Proc Notes C19 and C20.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details

More opportunities from Department Of Defense → ASC SUPPLIER OPER OEM DIVISION

Same awarding agency

NAICS: 332119
New
DIBBS
BUSHING, SLEEVE
Solicitation # SPE4A5-26-T-328Q
The contract is for the procurement of two BUSHING, SLEEVE items with NSN 5365-01-729-5733 and part number BACB28AP12Z059, issued under solicitation SPE4A5-26-T-328Q. Delivery is required within 127 days to the DLA Distribution facility in New Cumberland, Pennsylvania, with FOB origin terms and no variance allowed in quantity. The item is classified as a critical application component for Boeing and must comply with stringent technical and quality requirements referenced from the DLA Master List, including configuration change management, supply chain traceability per DLA Procurement Note C03, and FAA-specific provisions such as bare item marking and airworthiness certification. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129, with preservation methods specified for dry conditioning and no special marking required. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 with zero non-conformances mandated unless otherwise stated, and attributes are assigned verification levels or AQLs based on criticality. The supplier must retain supply chain documentation and ensure all materials meet FAA airworthiness standards, as outlined in DFARS 252.211-7003, despite the absence of unique identification requirements. Transportation and shipping logistics are governed by DLA Procurement Notes C19 and C20, and all documentation must align with the Technical Data Package and associated Contract Data Requirements Lists. The item is subject to the DLA Packaging Requirements and must be delivered on or before December 18, 2026. The contract includes mandatory compliance with quality assurance provisions, and nonconforming supplies must be processed per RQ011 guidelines regarding removal of government identification. All technical specifications referenced are incorporated by link to the DLA eProcurement portal, and the procurement is conducted under the DoD-authorized unit of issue with a unit price and total price specified for the two-piece order.
Metal Crown, Closure, and Other Metal Stamping (except Automotive)

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332999
New
DIBBS
SHIM
Solicitation # SPE4A5-26-T-323P
The contract pertains to the procurement of five units of a specific shim identified by NSN 5365-01-493-6230 and part number 212-011-731-101, supplied by BELL TEXTRON INC with CAGE code 97499. Delivery is required FOB origin within 171 days of contract award, with no tolerance for quantity variance. Inspection and acceptance both occur at the destination facility. Packaging must comply with MIL-STD-2073-1E, including specified preservation methods, materials, and unit containers, while marking adheres strictly to MIL-STD-129 and DLA packaging requirements, with no special marking codes applied. Unit identification is not required per customer request under DFARS 252.211-7003(c)(1)(i). Acceptable sampling follows Sikorsky Corporation’s Alternate Sampling Plan QAP 1201, which must meet or exceed ASQ H1331 or MIL-STD-1916 standards. The delivery destination is the DLA Distribution facility in New Cumberland, Pennsylvania, with the same address used for freight shipping. The required ship date is January 31, 2027, with an original delivery requirement of October 15, 2027. Technical and quality requirements referenced are governed by the DLA Master List, with applicable revisions determined by the solicitation or award date depending on acquisition scale. The contract is issued under solicitation SPE4A5-26-T-323P, with a unit price of $5.00 per piece for a total value of $25.00.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332618
New
DIBBS
WIRE ROPE ASSEMBLY,
Solicitation # SPE4A5-26-T-325N
The contract is for the procurement of 20 single-leg wire rope assemblies with NSN 4010-01-611-5048 and part number 6898106-107, supplied by Mazzeolla Lifting Technologies, Inc. Delivery is required FOB origin within 171 days, with no tolerance for quantity variance, and inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, and marking must adhere to MIL-STD-129 without any special codes. Palletization follows DLA standards, and preservation methods are strictly controlled with no mercury or mercury-containing compounds permitted in preservation, packaging, or marking materials. The item must meet all technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with sampling governed by MIL-STD-1916 or ASQ H1331, applying zero non-conformances unless otherwise stipulated. Mercury is prohibited except in specified exempted applications such as batteries, fluorescent lights, and certain instruments, with portable mercury-containing devices requiring shockproof design and a secondary containment barrier. All deliveries must be sent to the DLA Distribution facility in New Cumberland, PA, and the contract is subject to transportation guidelines outlined in DLAD Proc Notes C19 and C20. The original required delivery date is May 30, 2027, with a needed ship date of January 31, 2027. The solicitation, issued under SPE4A5-26-T-325N, was posted August 4, 2026, with a response deadline of August 12, 2026, and falls under NAICS code 332618 as a federal procurement managed by the Department of Defense’s ASC Supplier Oper OEM Division.
Other Fabricated Wire Product Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332510
New
DIBBS
STAKE, GUY
Solicitation # SPE4A5-26-T-326K
STAKE, GUY is a procurement contract issued by the Department of Defense through the ASC SUPPLIER OPER OEM DIVISION under solicitation number SPE4A5-26-T-326K, requiring delivery of 67 units of item NSN 4030-01-710-7034 with a unit price of $67.00, totaling $4,489. The contract mandates strict adherence to DLA’s Master List of Technical and Quality Requirements, which override any conflicting standards such as ASTM D3951. Packaging must comply with MIL-STD-129 and RP001 DLA Packaging Requirements, with all items palletized and labeled according to specified guidelines. Inspection and acceptance occur at the destination, with no variance allowed in quantity. Delivery is due within 171 days of award, with an original required delivery date of March 30, 2027, and a needed ship date of January 31, 2027. The item must be delivered FOB origin to the receiving warehouse in Tracy, California, with transportation governed by DLAD PROC NOTES C19 and C20. The contract enforces a zero-defect sampling standard, requiring compliance with MIL-STD-1916 or ASQ H1331, where critical, major, and minor attributes must be verified at levels VII, IV, and II or with AQLs of 0.1, 1.0, and 4.0 respectively, and any unspecified attributes are treated as major. Acceptance requires zero non-conformances unless otherwise directed. Cybersecurity requirements mandate a CMMC Level 2 Self-Assessment, and all government identification must be removed from non-accepted supplies. The seller is subject to all DLA directives, including unit of issue specifications and packaging standards, with no exceptions permitted. Contract performance is monitored via the point of contact Hien-Van Trinh, and all documentation must reference the authorized DLA unit of issue as defined in official DoD guidelines.
Hardware Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334419
New
DIBBS
STAND, COMPRESSED GA
Solicitation # SPE4A5-26-T-325J
The contract is for the procurement of 18 units of a commercial off-the-shelf stand designed for compressed gas cylinders, identified by part number G-600 and NSN 4920-01-587-5435, sourced from First Safety Corporation Inc. The item must comply with all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, which take precedence over ASTM D3951 packaging standards. Packaging and labeling must follow MIL-STD-129, and palletization must adhere to DLA Packaging Requirements for Procurement (RP001). Delivery is FOB origin with a 171-day lead time, and inspection and acceptance occur at the destination. The quantity is fixed with no variance allowed. The delivery destination is the DLA Distribution facility in New Cumberland, Pennsylvania, with the required ship date set for January 31, 2027, and the original delivery date as July 24, 2027. Each unit is priced at $18.00, totaling $324.00 for the order, under contract SPE4A5-26-T-325J. Transportation details are governed by DLAD Proc Notes C19 and C20, and the unit of issue is each (EA). All government identification must be removed from non-accepted supplies, and compliance with the DLA Master List controls the applicable revision level based on the solicitation or award date.
Other Electronic Component Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334513
New
DIBBS
THERMOMETER, SELF-IN
Solicitation # SPE4A5-26-T-325E
The contract concerns the procurement of six self-injecting thermometers with NSN 6685-01-643-7750 under solicitation SPE4A5-26-T-325E, issued by the Department of Defense’s ASC SUPPLIER OPER OEM DIVISION. Delivery is required FOB origin within 171 days of award, with a firm delivery deadline of January 31, 2027, and no variance permitted in quantity. All units must comply with DLA’s technical and quality requirements referenced in the DLA Master List, including sampling protocols aligned with MIL-STD-1916 or ASQ H1331, where critical, major, and minor attributes must be verified at levels VII, IV, and II or corresponding AQLs of 0.1, 1.0, and 4.0. Zero non-conformances are required in sampled lots unless otherwise specified. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129 with the special marking code 05 indicating a delicate instrument, and palletization must conform to DLA packaging standards. The product is labeled as RTEMP INSTRUMENT CORPORATION P/N B4T6QPX2256X-C3TSVB and requires no government identification removal. The shipment must be sent to the specified receiving warehouse in Tracy, California, following DLA transportation notes C19 and C20, and packaging must comply with hazardous materials standards where applicable. The unit price is $6.00 per unit, totaling $36.00, with all terms governing inspection and acceptance occurring at the destination.
Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334512
New
DIBBS
CONTRACTOR FIRST ARTIC
Solicitation # SPE4A5-26-T-329T
The contract specifies the procurement of a dial indicating pressure gauge identified by NSN 6685012957435 and part number SG4MC10KPWRONAG, with a requirement for 20 units delivered FOB origin within 291 days. Technical and quality standards are governed by the DLA Master List of Technical and Quality Requirements, with revisions effective as of the solicitation issue date controlling compliance. The item is designated as a critical application with specific identification and marking requirements per MIL-STD-129 and the special marking code 05 for delicate instrument. Packaging must conform to MIL-STD-2073-1E with defined packaging methods, materials, and unit container codes, and palletization must adhere to DLA packaging rules. Mercury and mercury-containing compounds are strictly prohibited unless functional use is explicitly exempted and meets safety standards outlined in NAVSEA 5100-003D, requiring secondary containment for portable devices. Inspection and acceptance occur at the origin, and government identification must be removed from non-accepted items. Item Unique Identification is not required per customer request. Measuring and test equipment used must meet RT001 standards, and the contract references the QAP-106 and MIL-G-18997E technical documentation. The purchase request number is 7017742652, the solicitation number is SPE4A5-26-T-329T, and point of contact is Aprile Corley of the Department of Defense’s ASC Supplier Oper OEM Division.
Automatic Environmental Control Manufacturing for Residential, Commercial, and Appliance Use

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
NUT, PLAIN, PLATE
Solicitation # SPE4A5-26-T-328K
The contract pertains to the procurement of 24 plain plate nuts with NSN 5310-00-241-0092 under solicitation SPE4A5-26-T-328K, issued by the Department of Defense’s ASC SUPPLIER OPER OEM DIVISION. Delivery is required within 115 days after award, with responses due by August 12, 2026. The item has no shelf life requirement and does not require Unique Item Identification as specified by the Service customer, in accordance with DFARS 252.211-7003(c)(1)(i). Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless superseded by an amendment. Packaging must comply with DLA standards, and tailored higher-level quality requirements apply to both manufacturers and non-manufacturers. Inspection and acceptance occur at origin, and government identification must be removed from non-accepted supplies. Bare items must be physically marked according to RQ017, and measuring and test equipment used must meet specified standards. Sampling follows MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Unspecified attributes are treated as major. Zero non-conformances are required unless otherwise stated. Data supporting this procurement is deemed proprietary or insufficient for competitive bidding. The place of performance is Cherry Point, North Carolina, 28533-5040, with Jaelyn Buford listed as the primary point of contact.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334513
New
DIBBS
THERMOMETER, SELF-INDIC
Solicitation # SPE4A5-26-T-330M
The contract specifies the procurement of 36 digital, self-indicating thermometers, identified by the part number FLUKE 62 MAX and NSN 6685-01-613-2829, as a commercial off-the-shelf item. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with compliance determined by the revision in effect on the solicitation issue date or award date, depending on the acquisition size. The item must meet stringent packaging standards per MIL-STD-2073-1E and marking requirements under MIL-STD-129, including a special marking code for “Delicate instrument.” Preservation methods prohibit mercury or mercury compounds in packaging and require dry, controlled environments. Sampling procedures must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and critical attributes are assigned the highest verification levels. Delivery is FOB origin with a strict 36-unit quantity allowance with no variance permitted, and the item must be delivered to a designated DLA warehouse in Tracy, California, by January 31, 2027, after an initial required delivery date of November 25, 2026. Transportation and shipping instructions align with applicable DLA procedural notes, and the contract is administered under solicitation SPE4A5-26-T-330M with a unit price of $36.00 per unit.
Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334419
New
DIBBS
BATTERY CHARGER, AIR
Solicitation # SPE4A5-26-T-326V
The contract is for the procurement of six battery chargers, air model, identified by NSN 4920-01-498-2543 and part numbers 4159-MIL and CA 1550 MIL from Lamar Technologies LLC, with delivery required within 171 days under a total small business set-aside. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which supersede other standards such as ASTM D3951, and packaging must comply with MIL-STD-129 and DLA Packaging Requirements, including palletization per RP001. Sampling follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and attributes are classified with verification levels VII, IV, and II corresponding to AQLs of 0.1, 1.0, and 4.0 respectively. The item is designated as a critical application requiring strict configuration control and physical identification, and non-approved sources must obtain source approval from the design control activity with technical data packages submitted with their offer. Delivery is FOB origin to the DLA Distribution facility in New Cumberland, Pennsylvania, with inspection and acceptance occurring at destination. The purchase request number is 7017739882, unit of issue is EA, quantity is fixed at six units with zero variance allowed, and the required delivery date is January 31, 2027, with an original target of January 26, 2027. All markings, labeling, and documentation must adhere to applicable DoD and DLA directives, and transportation follows DLAD procedural notes C19 and C20.
Other Electronic Component Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
RELAY BOX ASSY
Solicitation # SPE4A5-26-T-329V
The contract pertains to the procurement of one Relay Box Assembly with part number 145E2032-5 and NSN 6615-01-244-9740, issued under solicitation SPE4A5-26-T-329V by the Department of Defense’s ASC Supplier Oper OEM Division. Delivery is required within 171 days from the contract award, with FOB origin terms and a strict zero variance in quantity. Inspection and acceptance occur at the manufacturer’s origin, in accordance with MIL-STD-1916 or a comparable zero-based sampling plan, with critical attributes requiring a verification level of VII or an AQL of 0.1. Non-conforming items must have government identification removed prior to return. The contractor must comply with DLA’s tailored quality requirements, packaging standards per MIL-STD-2073-1E, and marking requirements under MIL-STD-129, using code U for packaging and no special marking. Cybersecurity compliance is mandated at CMMC Level 2 via self-assessment. The item is not subject to Item Unique Identification. Delivery is to DLA Distribution San Joaquin at Tracy, California, with transportation governed by DLA procedural notes C19 and C20. The contract enforces the DLA Master List of Technical and Quality Requirements, with revisions effective as of the solicitation issue date.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details