Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

TRANSMITTER, PRESSURE

Active
SPE4A5-26-T-325YFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of two pressure transmitters, part number BT5-T4-44G-P, with NSN 6685-01-728-2144, classified as a critical application item. Delivery is required FOB origin within 171 days, with no variance allowed in quantity, and inspection and acceptance are to occur at the manufacturer’s facility. All items must comply with DLA packaging standards per MIL-STD-2073-1E and marking requirements under MIL-STD-129, with no special markings required. Packaging must follow RP001 guidelines and be palletized accordingly. Sampling and quality verification must adhere to MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes are treated as major. Zero non-conformances are required in sample lots unless otherwise stated. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List, with the applicable revision determined by the solicitation or award date based on acquisition type. Measuring equipment must meet RT001 standards, and source approval documentation must comply with RC001. The contract specifies delivery to the DLA Distribution facility in New Cumberland, Pennsylvania, with transportation directives governed by DLAD Proc Notes C19 and C20. The required ship date is January 31, 2027, with the original delivery deadline set for April 9, 2027.

General Info

Two critical pressure transmitters, FOB origin, deliver by Jan 31, 2027, to New Cumberland, PA, per MIL-STD and DLA standards.

Agency

Department Of Defense → ASC SUPPLIER OPER OEM DIVISIONView Agency

NAICS

334512 - Automatic Environmental Control Manufacturing for Residential, Commercial, and Appliance UseView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

SPE4A5-26-T-325Y.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC SUPPLIER OPER OEM DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC SUPPLIER OPER OEM DIVISION
View Agency Profile
Office AddressUS
Contacts
Jamie Bonda
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
TRANSMITTER,PRESSURE
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RT001: MEASURING AND TEST EQUIPMENT
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)
TRANSMITTER,PRESSUR
CRITICAL APPLICATION ITEM
BARKSDALE INC 89326 P/N BT5-T4-44G-P
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
SPE4A5-26-T-325Y
SECTION B
PR: 7017741491 PRLI: 0001 CONT’D
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017741491 0001 EA 2.000
NSN/MATERIAL:6685017282144
DELIVERY (IN DAYS):0171
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: ORIGIN
ACCEPTANCE POINT: ORIGIN
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:C
UNIT CONT:D3 OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:01/31/2027 Original Required Delivery Date:04/09/2027
SPE4A5-26-T-325Y NSN/Part Number: 6685-01-728-2144 Quantity: 2 EA Purchase Request: 7017741491QTY: 2 Delivery: 171 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 334512
New
DIBBS
GAGE, PRESSURE, DIAL
Solicitation # SPE4A5-26-T-323K
The contract is for the procurement of four pressure dial gauges identified by NSN 6685-01-205-3830 and part number 19HCXXX0X15E1BXAXX05 under solicitation SPE4A5-26-T-323K, a total small business set-aside with NAICS code 334512. Delivery is required within 171 days of award to the destination warehouse in Tracy, California, with FOB origin terms and no quantity variance allowed. Inspection and acceptance occur at the destination point, and packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including special marking for delicate instruments. The contract incorporates DLA’s master technical and quality requirements, which govern sampling procedures using MIL-STD-1916 or comparable zero-based plans, with critical, major, and minor attributes assigned verification levels or AQLs of VII, IV, II or 0.1, 1.0, 4.0 respectively. Mercury and mercury-containing compounds are strictly prohibited in the product or its packaging unless specifically exempted for functional components like batteries or instruments, and portable mercury-containing devices must have double containment as per NAVSEA 5100-003D. Preservation, packaging, and marking must also exclude mercury entirely. The unit of issue is each, priced at $4.00 per unit, totaling $16.00. The solicitation closes on August 12, 2026, with award anticipated shortly after, and primary contact is Aliza Wyche of the DLA.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334512
New
DIBBS
TRANSMITTER, PRESSURE
Solicitation # SPE4A5-26-T-323N
The contract is for the procurement of pressure transmitters under solicitation SPE4A5-26-T-323N, with a Women-Owned Small Business Set-Aside designation, and is governed by DLA packaging and quality requirements as outlined in the DLA Master List of Technical and Quality Requirements. The item, identified by NSN 6685014917943 and part numbers from approved manufacturers including DRUCK, KULITE, G P 50 NEW YORK, and HYDAC, must comply with strict sampling standards such as MIL-STD-1916 or ASQ H1331, with zero non-conformances required unless otherwise specified. Verification levels and AQLs are mandated for critical, major, and minor attributes, and manufacturers may choose between attribute or variable inspection methods. Physical identification and marking must adhere to MIL-STD-129 with no special marking codes applied, and packaging must follow MIL-STD-2073-1E with U-pack code, including specific packaging methods and materials for preservation and cushioning. The contract calls for delivery of 90 units, each priced at $90.00, totaling $8,100.00, with a delivery timeline of 171 days after award, FOB origin, and inspection and acceptance to occur at destination. The quantity variance is strictly zero percent, meaning no over or under shipments are permitted. Palletization must meet DLA packaging requirements, and all units are to be delivered to New Cumberland, Pennsylvania, 17070-5002. The solicitation was issued on August 4, 2026, with responses due by August 12, 2026, and is managed by the Department of Defense’s ASC Supplier Operations OEM Division. Contract inquiries and communications are to be directed to Jamie Bonda at the provided contact information, and the NAICS code 334512 applies to the sensor manufacturing classification. The unit of issue is each (EA), consistent with DoD standards.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334512
New
DIBBS
CASE
Solicitation # SPE4A5-26-T-321V
This contract, issued under solicitation SPE4A5-26-T-321V by the Department of Defense’s DLA, specifies the procurement of one unit of NSN 6685010500031, part number 0414-2153, manufactured by Rogerson Kratos with CAGE code 34830. The item is classified as a Critical Application Item and must comply with all DLA Master List of Technical and Quality Requirements referenced by R or I numbers, which supersede any industry standards such as ASTM D3951. Packaging must adhere strictly to RP001 DLA Packaging Requirements, MIL-STD-129 for labeling, and FED-STD-313 for hazardous material handling, with non-hazardous items requiring commercial packaging compliant with ASTM D3951 only if not overridden by DLA standards. The item must be delivered FOB origin within 171 days, with inspection and acceptance occurring at destination, and zero tolerance for quantity variance. Compliance with Cybersecurity Maturity Model Certification (CMMC) Level 2 self-assessment is mandatory, and sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances allowed unless explicitly stated otherwise, where critical, major, and minor attributes are assigned verification levels VII, IV, and II respectively or AQLs of 0.1, 1.0, and 4.0. All packaging and palletization must meet RP001 guidelines, and the unit of issue is EA as defined by DLA’s authorized standards. Delivery is to DLA Distribution Depot Hill at Hill AFB, Utah, with a required ship date of January 31, 2027, after the original delivery deadline of December 8, 2026. Transportation instructions are governed by DLAD Proc Notes C19 and C20, and the solicitation was posted on August 4, 2026, with a response deadline of August 12, 2026. Primary point of contact is Aliza Wyche.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334512
New
DIBBS
GAGE, PRESSURE, DIAL IND
Solicitation # SPE4A6-26-T-11YW
The contract is for the procurement of 283 units of a dial indicating pressure gauge with NSN 6685-01-432-4038 and part number 750SS4004LA15, under solicitation SPE4A6-26-T-11YW, a total small business set-aside under NAICS code 334512. Delivery is required within 92 days from the award date, FOB origin, with zero tolerance for quantity variance, and inspection and acceptance both occur at the destination. The item is classified as a critical application and must be marked in accordance with MIL-STD-129 with a special marking code of 05 indicating it is a delicate instrument. Packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, including use of unit container D3, intermediate container E5, and pack code U. All physical identification and marking requirements are governed by RQ017. Sampling and quality inspection follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise specified, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Technical and quality requirements are referenced from the DLA Master List of Technical and Quality Requirements, and documentation for source approval must adhere to RC001. The delivery destination is the DLA Distribution facility in New Cumberland, Pennsylvania, and the original required delivery date is February 23, 2027, with a needed ship date of May 13, 2026. The contract is managed by the ASC Commodities Division under the Department of Defense, with Shameka Edwards as the primary point of contact.
ASC COMMODITIES DIVISION

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334512
New
DIBBS
PROBE, HUMIDITY-TEMP
Solicitation # SPE4A5-26-T-326H
This contract is for the procurement of 25 humidity-temperature probes, part number HMP110I10E0CJB1 from Vaisala Inc, identified by NSN 6685-01-721-1250, classified as a critical application item. Delivery is required within 48 days of award, with FOB origin terms and inspection and acceptance occurring at the destination. The item must comply with MIL-STD-2073-1E packaging standards and MIL-STD-129 marking requirements, with no special markings and palletization in accordance with DLA packaging guidelines. The product is subject to strict quality and technical requirements referenced from the DLA Master List of Technical and Quality Requirements, with sampling protocols governed by MIL-STD-1916 or ASQ H1331, requiring zero non-conformances unless otherwise stated. Any attributes not explicitly defined are treated as major. The probe must be free of intentional mercury or mercury compounds, except in approved exceptions such as functional batteries, fluorescent lights, sensors, or reagents specified by NAVSEA, with portable mercury-containing devices requiring shockproof construction and a secondary containment barrier per NAVSEA 5100-003D. All measuring and test equipment used during production must be properly calibrated and documented, and source approval must include complete documentation. The contract is a total small business set-aside under NAICS 334512, with a response deadline of August 12, 2026, and the required delivery date is January 18, 2027. The delivery address is the DLA Distribution facility in New Cumberland, Pennsylvania, and transportation details follow DLA procedural notes C19 and C20.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334512
New
DIBBS
TRANSMITTER, PRESSURE
Solicitation # SPE4A6-26-T-12DB
This contract specifies the procurement of a pressure transmitter with part number R87547T4 manufactured by Curtiss-Wright Electro-Mechanical, identified by NSN 6685-01-532-8927. A total of 14 units are required at a unit price of $14.00, for a total value of $196.00, with delivery scheduled to be completed within 63 days from the contract award under FOB origin terms and zero variance allowed in quantity. The item is classified as a critical application component, and strict compliance is mandated with DLA packaging requirements and MIL-STD-2073-1E for preparation, including specific packaging methods, cushioning, wrapping, and container types, all marked per MIL-STD-129 with the special code 06 indicating delicate instrumentation and an upward arrow. Mercury or mercury-containing compounds are strictly prohibited from direct contact with the hardware except under narrowly defined exceptions for batteries, fluorescent lamps, and specific instruments, with portable devices required to have shockproof construction and secondary containment per NAVSEA 5100-003D. The delivery destination is the DLA Distribution facility in New Cumberland, Pennsylvania, with the same address serving as both the parcel post and freight shipping point. The original required delivery date is March 15, 2027, with a need-by date of October 15, 2026. The solicitation, issued under SPE4A6-26-T-12DB, incorporates all referenced technical and quality standards from the DLA Master List, and the contract is governed by federal acquisition regulations with no set-aside type specified.
ASC COMMODITIES DIVISION

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334512
New
DIBBS
THERMOCOUPLE, IMMERS
Solicitation # SPE4A6-26-T-11VS
This contract specifies the procurement of 19 units of a thermocouple, immersion type, identified by NSN 6685-01-358-7448 and part numbers 1858707, 1858707-2, and 2015HARDWAREKIT1 under solicitation SPE4A6-26-T-11VS. Delivery is required within 171 days to the DLA Distribution San Joaquin facility in Tracy, California, with FOB origin terms and zero variance allowed in quantity. The items must be packaged to MIL-STD-2073-1E standards, marked per MIL-STD-129 with a special code indicating they are delicate instruments, and palletized according to DLA packaging requirements. Inspection and acceptance occur at the destination, and no government identification is required on non-accepted supplies. Sampling must follow MIL-STD-1916, ASQ H1331, or an equivalent zero-based plan, assigning verification levels of VII, IV, and II for critical, major, and minor attributes respectively, with zero non-conformances required unless otherwise stated. The use of mercury or mercury-containing compounds is strictly prohibited except for specific functional applications in batteries, fluorescent lights, sensors, controls, weapon systems, or chemical reagents authorized by NAVSEA, and any portable devices containing mercury must have shockproof construction and a secondary containment boundary per NAVSEA 5100-003D. The contract incorporates all applicable technical and quality requirements from the DLA Master List, with revisions controlled based on solicitation or award dates depending on acquisition size. The required delivery date is July 2, 2027, with a need ship date of January 31, 2027.
ASC COMMODITIES DIVISION

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334512
New
DIBBS
GAGE, COMPOUND PRESSURE
Solicitation # SPE4A6-26-T-11SP
This contract solicits a compound pressure-vacuum dial indicator with NSN 6685009172028 and part number SC4ND1HCWRANA, requiring 82 units to be delivered within 158 days under a total small business set-aside. The product must comply with MIL-G-18997E and relevant technical data packages, including quality assurance provisions and specific drawing references, and is classified as a critical application item. All units must undergo inspection and acceptance at origin, with zero non-conformances required under sampling standards such as MIL-STD-1916 or ASQ H1331, unless otherwise specified. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129, with special marking for delicate instruments and no mercury or mercury compounds permitted in preservation, packaging, or direct contact with the hardware, except for explicitly allowed functional uses like batteries or instruments meeting NAVSEA 5100-003D standards. The contractor must conduct a first article test, with one unit designated for this purpose, though no separate charge is assumed unless explicitly priced. Delivery is FOB origin to the DLA distribution center in Tracy, California, with strict adherence to cleaning, preservation, and marking protocols. The contract incorporates technical and quality requirements from the DLA Master List, and all documentation must be submitted to the Naval Surface Warfare Center Philadelphia Division.
ASC COMMODITIES DIVISION

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334512
New
DIBBS
GAGE, PRESSURE, DIAL
Solicitation # SPE4A0-26-T-4157
The contract specifies the procurement of one unit of a dial pressure gage identified by NSN 6685-01-475-8408 and part number SG1N3HPWPANAG under solicitation SPE4A0-26-T-4157, with delivery required within 125 days FOB origin. All items must comply with stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, including adherence to MIL-STD-1916 or ASQ H1331 for sampling, zero non-conformances unless otherwise stated, and specific verification levels assigned to attributes. The gage must be manufactured and packaged in full compliance with MIL-STD-2073-1E and DLA packaging requirements, with marking conforming to MIL-STD-129 including the special code for delicate instrument, and palletization aligned with DLA standards. Inspection and acceptance occur at origin, with no tolerance for quantity variance. The technical data package follows REV A Gen 1 per MIL-G-18997E(2), and all non-accepted items must have government identification removed. Testing is to be conducted at the Naval Surface Warfare Center Carderock Division in Philadelphia, Pennsylvania, and the unit of issue is EA with a total price of one dollar.
AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334512
New
DIBBS
SWITCH, THERMOSTATIC
Solicitation # SPE7M0-26-T-030D
The contract is for a thermostatic switch with NSN 5930-01-455-4588, requesting a single unit under purchase request 7017722234. Delivery must be completed within five days of award. The solicitation number is SPE7M0-26-T-030D, posted on August 4, 2026, with responses due by August 17, 2026. It falls under NAICS code 334512 and is managed by the Department of Defense’s Maritime Supply Chain ESOC Buys office. Performance is required at Boone, Iowa, with a ZIP of 50036-5411. The primary point of contact is Laurie Wassmuth, reachable via email and phone provided. The procurement adheres to DLA packaging requirements and incorporates technical and quality specifications from the DLA Master List of Technical and Quality Requirements, identified by R or I numbers. For simplified acquisitions, the version of the master list in effect on the solicitation issue date or award date applies. Government identification must be removed from non-accepted supplies. The alternate offeror must submit a complete data package including details for both the approved and alternate parts.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 5 hours ago

DEADLINE

in 13 days
View Details
NAICS: 334512
New
DIBBS
TRANSMITTER, PRESSUR
Solicitation # SPE4A5-26-T-328X
The contract is for the procurement of one unit of a transmitter, pressure, identified by NSN 6685-01-657-4492 and part number B82.IXDNSFAIHSXAI8XX, with a total price of $1.00. Delivery is required within 20 days from the contract award, FOB origin, with no variance allowed in quantity. Inspection and acceptance occur at the destination, and packaging must comply with MIL-STD-2073-1E, including specific preservation methods, wrapping materials, and unit container specifications. Marking must follow MIL-STD-129 with no special markings required, and palletization adheres to DLA packaging standards. The item is to be delivered to USS SANTA BARBARA LCS 32 at FPO AP 96695, with transportation logistics governed by DLA procedural notes C19 and C20. The solicitation number is SPE4A5-26-T-328X, with a response deadline of August 12, 2026, and the work is classified under NAICS code 334512. Technical and quality requirements are referenced from the DLA Master List, and the contract is issued under the Department of Defense with Jackayla Pendergast as the primary point of contact. The original required delivery date is July 29, 2026, and the item is designated for government use only.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334512
New
DIBBS
TRANSMITTER, PRESSUR
Solicitation # SPE4A5-26-T-321B
The contract is for the procurement of a pressure transmitter, part number 7720024-104, with NSN 6685-00-215-0548, under solicitation SPE4A5-26-T-321B. A total quantity of 17 units is required, each priced at $17.00, with delivery due within 171 days from the contract award and a firm delivery date of January 31, 2027. Items are to be shipped FOB origin with no variance allowed in quantity, inspected and accepted at the destination. Packaging must comply with MIL-STD-2073-1E and marking per MIL-STD-129, with no special marking required. Palletization follows DLA packaging requirements, and shipment is directed to DLA Distribution at Robins Air Force Base, Georgia. Unit identification is not mandated per customer request, and the supplier is not required to implement Item Unique Identification. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, with applicable revisions determined by acquisition type and amendment dates. Sampling must follow MIL-STD-1916, ASQ H1331, or an equivalent zero-based plan; attributes are assigned verification levels or AQLs as specified, with unspecified attributes treated as major. Measuring and test equipment must be calibrated and compliant, and cybersecurity requirements mandate CMMC Level 2 self-assessment. Documentation for source approval must be submitted, and configuration changes require formal engineering change proposals or variance requests. The supplier must handle removal of government identification from non-accepted items and ensure physical identification markings are applied. Transportation and freight details are governed by DLAD procedural notes C19 and C20, and the solicitation adheres to DoD unit of issue standards.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details

More opportunities from Department Of Defense → ASC SUPPLIER OPER OEM DIVISION

Same awarding agency

NAICS: 332119
New
DIBBS
BUSHING, SLEEVE
Solicitation # SPE4A5-26-T-328Q
The contract is for the procurement of two BUSHING, SLEEVE items with NSN 5365-01-729-5733 and part number BACB28AP12Z059, issued under solicitation SPE4A5-26-T-328Q. Delivery is required within 127 days to the DLA Distribution facility in New Cumberland, Pennsylvania, with FOB origin terms and no variance allowed in quantity. The item is classified as a critical application component for Boeing and must comply with stringent technical and quality requirements referenced from the DLA Master List, including configuration change management, supply chain traceability per DLA Procurement Note C03, and FAA-specific provisions such as bare item marking and airworthiness certification. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129, with preservation methods specified for dry conditioning and no special marking required. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 with zero non-conformances mandated unless otherwise stated, and attributes are assigned verification levels or AQLs based on criticality. The supplier must retain supply chain documentation and ensure all materials meet FAA airworthiness standards, as outlined in DFARS 252.211-7003, despite the absence of unique identification requirements. Transportation and shipping logistics are governed by DLA Procurement Notes C19 and C20, and all documentation must align with the Technical Data Package and associated Contract Data Requirements Lists. The item is subject to the DLA Packaging Requirements and must be delivered on or before December 18, 2026. The contract includes mandatory compliance with quality assurance provisions, and nonconforming supplies must be processed per RQ011 guidelines regarding removal of government identification. All technical specifications referenced are incorporated by link to the DLA eProcurement portal, and the procurement is conducted under the DoD-authorized unit of issue with a unit price and total price specified for the two-piece order.
Metal Crown, Closure, and Other Metal Stamping (except Automotive)

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332999
New
DIBBS
SHIM
Solicitation # SPE4A5-26-T-323P
The contract pertains to the procurement of five units of a specific shim identified by NSN 5365-01-493-6230 and part number 212-011-731-101, supplied by BELL TEXTRON INC with CAGE code 97499. Delivery is required FOB origin within 171 days of contract award, with no tolerance for quantity variance. Inspection and acceptance both occur at the destination facility. Packaging must comply with MIL-STD-2073-1E, including specified preservation methods, materials, and unit containers, while marking adheres strictly to MIL-STD-129 and DLA packaging requirements, with no special marking codes applied. Unit identification is not required per customer request under DFARS 252.211-7003(c)(1)(i). Acceptable sampling follows Sikorsky Corporation’s Alternate Sampling Plan QAP 1201, which must meet or exceed ASQ H1331 or MIL-STD-1916 standards. The delivery destination is the DLA Distribution facility in New Cumberland, Pennsylvania, with the same address used for freight shipping. The required ship date is January 31, 2027, with an original delivery requirement of October 15, 2027. Technical and quality requirements referenced are governed by the DLA Master List, with applicable revisions determined by the solicitation or award date depending on acquisition scale. The contract is issued under solicitation SPE4A5-26-T-323P, with a unit price of $5.00 per piece for a total value of $25.00.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332618
New
DIBBS
WIRE ROPE ASSEMBLY,
Solicitation # SPE4A5-26-T-325N
The contract is for the procurement of 20 single-leg wire rope assemblies with NSN 4010-01-611-5048 and part number 6898106-107, supplied by Mazzeolla Lifting Technologies, Inc. Delivery is required FOB origin within 171 days, with no tolerance for quantity variance, and inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, and marking must adhere to MIL-STD-129 without any special codes. Palletization follows DLA standards, and preservation methods are strictly controlled with no mercury or mercury-containing compounds permitted in preservation, packaging, or marking materials. The item must meet all technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with sampling governed by MIL-STD-1916 or ASQ H1331, applying zero non-conformances unless otherwise stipulated. Mercury is prohibited except in specified exempted applications such as batteries, fluorescent lights, and certain instruments, with portable mercury-containing devices requiring shockproof design and a secondary containment barrier. All deliveries must be sent to the DLA Distribution facility in New Cumberland, PA, and the contract is subject to transportation guidelines outlined in DLAD Proc Notes C19 and C20. The original required delivery date is May 30, 2027, with a needed ship date of January 31, 2027. The solicitation, issued under SPE4A5-26-T-325N, was posted August 4, 2026, with a response deadline of August 12, 2026, and falls under NAICS code 332618 as a federal procurement managed by the Department of Defense’s ASC Supplier Oper OEM Division.
Other Fabricated Wire Product Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
STAKE, GUY
Solicitation # SPE4A5-26-T-326K
STAKE, GUY is a procurement contract issued by the Department of Defense through the ASC SUPPLIER OPER OEM DIVISION under solicitation number SPE4A5-26-T-326K, requiring delivery of 67 units of item NSN 4030-01-710-7034 with a unit price of $67.00, totaling $4,489. The contract mandates strict adherence to DLA’s Master List of Technical and Quality Requirements, which override any conflicting standards such as ASTM D3951. Packaging must comply with MIL-STD-129 and RP001 DLA Packaging Requirements, with all items palletized and labeled according to specified guidelines. Inspection and acceptance occur at the destination, with no variance allowed in quantity. Delivery is due within 171 days of award, with an original required delivery date of March 30, 2027, and a needed ship date of January 31, 2027. The item must be delivered FOB origin to the receiving warehouse in Tracy, California, with transportation governed by DLAD PROC NOTES C19 and C20. The contract enforces a zero-defect sampling standard, requiring compliance with MIL-STD-1916 or ASQ H1331, where critical, major, and minor attributes must be verified at levels VII, IV, and II or with AQLs of 0.1, 1.0, and 4.0 respectively, and any unspecified attributes are treated as major. Acceptance requires zero non-conformances unless otherwise directed. Cybersecurity requirements mandate a CMMC Level 2 Self-Assessment, and all government identification must be removed from non-accepted supplies. The seller is subject to all DLA directives, including unit of issue specifications and packaging standards, with no exceptions permitted. Contract performance is monitored via the point of contact Hien-Van Trinh, and all documentation must reference the authorized DLA unit of issue as defined in official DoD guidelines.
Hardware Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
STAND, COMPRESSED GA
Solicitation # SPE4A5-26-T-325J
The contract is for the procurement of 18 units of a commercial off-the-shelf stand designed for compressed gas cylinders, identified by part number G-600 and NSN 4920-01-587-5435, sourced from First Safety Corporation Inc. The item must comply with all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, which take precedence over ASTM D3951 packaging standards. Packaging and labeling must follow MIL-STD-129, and palletization must adhere to DLA Packaging Requirements for Procurement (RP001). Delivery is FOB origin with a 171-day lead time, and inspection and acceptance occur at the destination. The quantity is fixed with no variance allowed. The delivery destination is the DLA Distribution facility in New Cumberland, Pennsylvania, with the required ship date set for January 31, 2027, and the original delivery date as July 24, 2027. Each unit is priced at $18.00, totaling $324.00 for the order, under contract SPE4A5-26-T-325J. Transportation details are governed by DLAD Proc Notes C19 and C20, and the unit of issue is each (EA). All government identification must be removed from non-accepted supplies, and compliance with the DLA Master List controls the applicable revision level based on the solicitation or award date.
Other Electronic Component Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334513
New
DIBBS
THERMOMETER, SELF-IN
Solicitation # SPE4A5-26-T-325E
The contract concerns the procurement of six self-injecting thermometers with NSN 6685-01-643-7750 under solicitation SPE4A5-26-T-325E, issued by the Department of Defense’s ASC SUPPLIER OPER OEM DIVISION. Delivery is required FOB origin within 171 days of award, with a firm delivery deadline of January 31, 2027, and no variance permitted in quantity. All units must comply with DLA’s technical and quality requirements referenced in the DLA Master List, including sampling protocols aligned with MIL-STD-1916 or ASQ H1331, where critical, major, and minor attributes must be verified at levels VII, IV, and II or corresponding AQLs of 0.1, 1.0, and 4.0. Zero non-conformances are required in sampled lots unless otherwise specified. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129 with the special marking code 05 indicating a delicate instrument, and palletization must conform to DLA packaging standards. The product is labeled as RTEMP INSTRUMENT CORPORATION P/N B4T6QPX2256X-C3TSVB and requires no government identification removal. The shipment must be sent to the specified receiving warehouse in Tracy, California, following DLA transportation notes C19 and C20, and packaging must comply with hazardous materials standards where applicable. The unit price is $6.00 per unit, totaling $36.00, with all terms governing inspection and acceptance occurring at the destination.
Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334519
New
DIBBS
ADAPTER, GAGE
Solicitation # SPE4A5-26-T-321C
The contract pertains to the procurement of an Adapter, Gage with NSN 6685-00-274-5533 and part number 421371-1, manufactured by Enerpac Tool Group Corp under specification SPE4A5-26-T-321C. Nine units are required at a unit price of $9.00, with delivery due in 171 days FOB origin to DLA Distribution San Diego. The item is classified as a critical application item requiring physical identification and compliance with MIL-STD-129 marking standards. Packaging must adhere to MIL-STD-2073-1E, with specific preservation methods and unit containment codes, and palletization must meet DLA’s packaging requirements. Inspection and acceptance occur at the destination, with zero tolerance for non-conformances under sampling plans specified by MIL-STD-1916 or equivalent zero-based systems, unless otherwise designated. Attributes are assigned verification levels or AQLs per defined standards, and unspecied attributes are treated as major. Mercury and mercury-containing compounds are strictly prohibited except in exempted functional components such as batteries or instrument sensors, which must include secondary containment as per NAVSEA 5100-003D. Configuration changes require formal engineering change proposals or variance requests, and government identification must be removed from non-accepted supplies. Covered defense information provisions apply, and the contract explicitly excludes Item Unique Identification per DFARS 252.211-7003(c)(1)(i). The solicitation opened on August 4, 2026, with responses due August 12, 2026, and performance is directed under DLA’s authorized unit of issue system with full alignment to technical and quality requirements referenced from the DLA Master List.
Other Measuring and Controlling Device Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
NUT, PLAIN, PLATE
Solicitation # SPE4A5-26-T-328K
The contract pertains to the procurement of 24 plain plate nuts with NSN 5310-00-241-0092 under solicitation SPE4A5-26-T-328K, issued by the Department of Defense’s ASC SUPPLIER OPER OEM DIVISION. Delivery is required within 115 days after award, with responses due by August 12, 2026. The item has no shelf life requirement and does not require Unique Item Identification as specified by the Service customer, in accordance with DFARS 252.211-7003(c)(1)(i). Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless superseded by an amendment. Packaging must comply with DLA standards, and tailored higher-level quality requirements apply to both manufacturers and non-manufacturers. Inspection and acceptance occur at origin, and government identification must be removed from non-accepted supplies. Bare items must be physically marked according to RQ017, and measuring and test equipment used must meet specified standards. Sampling follows MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Unspecified attributes are treated as major. Zero non-conformances are required unless otherwise stated. Data supporting this procurement is deemed proprietary or insufficient for competitive bidding. The place of performance is Cherry Point, North Carolina, 28533-5040, with Jaelyn Buford listed as the primary point of contact.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
BATTERY CHARGER, AIR
Solicitation # SPE4A5-26-T-326V
The contract is for the procurement of six battery chargers, air model, identified by NSN 4920-01-498-2543 and part numbers 4159-MIL and CA 1550 MIL from Lamar Technologies LLC, with delivery required within 171 days under a total small business set-aside. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which supersede other standards such as ASTM D3951, and packaging must comply with MIL-STD-129 and DLA Packaging Requirements, including palletization per RP001. Sampling follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and attributes are classified with verification levels VII, IV, and II corresponding to AQLs of 0.1, 1.0, and 4.0 respectively. The item is designated as a critical application requiring strict configuration control and physical identification, and non-approved sources must obtain source approval from the design control activity with technical data packages submitted with their offer. Delivery is FOB origin to the DLA Distribution facility in New Cumberland, Pennsylvania, with inspection and acceptance occurring at destination. The purchase request number is 7017739882, unit of issue is EA, quantity is fixed at six units with zero variance allowed, and the required delivery date is January 31, 2027, with an original target of January 26, 2027. All markings, labeling, and documentation must adhere to applicable DoD and DLA directives, and transportation follows DLAD procedural notes C19 and C20.
Other Electronic Component Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334514
New
DIBBS
TRANSMITTER, LIQUID QUA
Solicitation # SPE4A5-26-T-325X
The contract specifies the procurement of four liquid quantity transmitters under solicitation SPE4A5-26-T-325X, with a delivery deadline of 171 days after order. The item, identified by NSN 6680-01-666-8749, is subject to stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation or award date depending on acquisition size. Packaging, identification, and documentation must comply with specific DLA standards including RP001, RQ011, RQ017, and RC001, while sampling follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated. Configuration changes require formal engineering change proposal procedures, and cybersecurity compliance mandates CMMC Level 2 certification for third-party assessors. Technical data associated with the item is subject to ITAR or EAR export controls, prohibiting unauthorized disclosure to foreign persons regardless of location, with distribution restricted to contractors who hold US/Canada Joint Certification Program status, have completed mandatory DLA training, and received explicit approval. Item Unique Identification is waived per customer request under DFARS 252.211-7003(c)(1)(i). The contract is managed by the Department of Defense’s ASC Supplier Oper OEM Division, with performance located in New Cumberland, Pennsylvania, and primary point of contact Hien-Van Trinh.
Totalizing Fluid Meter and Counting Device Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
NUT, SHEET SPRING
Solicitation # SPE4A5-26-T-323A
This contract is for the procurement of 951 units of a nut, sheet spring, identified as a commercial off-the-shelf item under part number 03A111-3-1 and its alternate variants including 13100009-1 and 132A11144-7-3, sourced from multiple approved suppliers such as Northrop Grumman Systems Corporation, Republic Fastener Mfg. Corp., GE Engine Services Distribution, LLC, STE MRAS, LLC, and The Monadnock Company. The item is classified as a critical application component and is not required to have unique item identification, in accordance with DFARS 252.211-7003(c)(1)(i). The National Stock Number is 5310-01-331-8030, with a unit price of $951.00, resulting in a total contract value based on the agreed quantity. Delivery is required within 171 days, with shipment to be made FOB origin under strict packaging standards including MIL-STD-2073-1E and MIL-STD-129 marking requirements, and palletization per DLA’s RP001 packaging guidelines. The item is designated for delivery to the DLA Distribution Depot in Tinker AFB, Oklahoma, with no tolerance for quantity variance. The contract does not require special marking and mandates that all units be packaged and labeled in full compliance with federal packaging and transportation regulations. The procurement is part of a HUBZone Set-Aside solicitation, with the NAICS code 332722 indicating manufacturing of screw, nut, and bolt products. The ordering activity is the ASC Supplier Oper OEM Division under the Department of Defense, with the solicitation issued under reference SPE4A5-26-T-323A. The original required delivery date is August 16, 2027, with a need ship date of January 31, 2027, and the point of contact for logistics inquiries is Donetta Nelson. Transportation logistics follow DLA Procurement Notes C19 and C20, and all units must be delivered in accordance with the DoD-authorized unit of issue as defined in the official DLA documentation.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334519
New
DIBBS
ADAPTER ASSEMBLY, COMPA
Solicitation # SPE4A5-26-T-321S
This contract specifies the procurement of an Adapter Assembly, Comparator, identified by NSN 6685-00-934-8642 and part number 3460-108-0120, with a quantity of four units. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revision control based on the solicitation or award date depending on the acquisition size. Packaging must comply with MIL-STD-2073-1E and DLA Packaging Requirements, including marking per MIL-STD-129 with no special markings required. The item is designated as a Critical Application Item, and mercury or mercury-containing compounds are strictly prohibited in any hardware, preservation, packaging, or marking materials except for specific functional applications such as batteries, fluorescent lights, sensors, or chemical reagents as defined by NAVSEA, with portable devices containing mercury requiring shock-proof construction and a secondary containment boundary. Sampling for inspection follows MIL-STD-1916 or a comparable zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively, and only zero non-conformances are acceptable unless otherwise stated. Delivery is FOB origin, with inspection and acceptance occurring at destination, and the item must be delivered within 171 days from the award date with zero tolerance for quantity variance. The destination is the DLA Distributor San Joaquin warehouse in Tracy, CA, with shipping details and transportation governed by DLAD Proc Notes C19 and C20. The original required delivery date is January 18, 2027, with a need ship date of January 31, 2027, and the contract was solicited under SPE4A5-26-T-321S with a response deadline of August 12, 2026.
Other Measuring and Controlling Device Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details