Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

This Combined Synopsis/Solicitation opportunity from Department Of Defense was posted on May 19, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Trash Disposal Unit Launch Kit (TDULK)

Closed
N6660426Q0321Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

AI Contract Overview

Show more

The Trash Disposal Unit Launch Kit (TDULK) solicitation, identified as N6660426Q0321, is a Firm Fixed Price (FFP) combined synopsis and solicitation issued by the Naval Undersea Warfare Center Division Newport for a 100% small business set-aside under NAICS code 332710. The contract seeks 35 units of the TDULK to be delivered F.O.B. Destination, Newport, RI by December 31, 2026, with all work performed under strict adherence to Government Drawings referenced in Attachment 1. Key amendments have been issued: Amendment 01 updated the CMMC requirement from Level 2 (C3PAO) to Level 2 (Self), and Amendment 02 clarified technical specifications, confirming that Nylon 6 may substitute for Nylon 6/6 and that extrusion is an acceptable manufacturing method for the specified parts, including resolving a dimensional ambiguity for drawing 8992417 REV A by specifying a 3/8-inch width. Compliance with DFARS 252.204-7012 and related cybersecurity provisions mandates implementation of NIST SP 800-171 controls, with CMMC Level 2 certification verified via SPRS as a disqualifying requirement. Contractors must maintain ISO 9001:2015 certification, submit up to three relevant past performance references, and provide active SAM registration with valid UEI and CAGE codes. All items must bear a MIL-STD-130 compliant Data Matrix barcode for Item Unique Identification, and packaging is expected to meet defense handling standards, including MIL-STD-2073 and MIL-STD-129, though specifics reside in the drawings. The evaluation follows a Lowest Price Technically Acceptable (LPTA) methodology, prioritizing technical acceptability as a gatekeepers, with award going to the lowest-priced responsive offeror. Payment will be made via government credit card or WAWF, and all submissions must include complete representations and certifications as required under FAR and DFARS clauses, including prohibitions on certain telecommunications equipment and disclosure of foreign ownership. Offers must be submitted electronically via SAM.gov by the deadline, remain valid for 60 days, and be consolidated into a single document containing price, certification documentation, past performance, and point-of-contact details.

General Info

DoD contract N6660426Q0321 for small business, TDULK, updated CMMC to Level 2 self-assessment.

Agency

Department Of Defense → Nuwc Division NewportView Agency

NAICS

332710 - Machine ShopsView NAICS

Place of Performance

RI

Set-Aside

SBA

Documents

(2)

RFQ N66604-26-Q-0321 Combined Synopsis/Solicitation for Trash Disposal Unit Launch Kit

PDFrfq

N6660426Q0321.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

2 updates
PhaseClosed
Posted

Combined Synopsis

Amendment 1

Contract was updated

Amendment 2

Contract was updated

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Nuwc Division Newport
Contacts1 person available
OfficeNEWPORT, RI, 02841-1703, USA
Organization / Agency
Department Of Defense → Nuwc Division Newport
View Agency Profile
Office AddressNEWPORT, RI, 02841-1703, USA
Contacts

Full Description

Show more

Amendment 02 


The purpose of this amendment is to post questions and answers. All other terms and conditions remain unchanged. 


1. I am currently having issues with drawing number 8992417 REV A. The drawing doesn't include the Width of the part.


Answer: The width is 3/8”


2. I have a question about one of the material requirements for the above solicitation. Would Nylon 6 be able to replace some of the parts calling for Nylon 6/6. The Nylon 6/6 is extruded whereas Nylon 6 is cast, making the larger diameter parts material easier to source.


Answer: Nylon 6 is acceptable


3. For drawing number: 8992416. Would you guys accept an extrusion for the raw material manufacturing method? Essentially that would change the SAE AMS-A-22771.


Answer: Extrusion manufacturing method is acceptable



Amendment 01 


The purpose of this amendment is to update the CMMC Level requirement from CMMC Level 2 (C3PAO) to CMMC Level 2 (Self). Please refer to updated attachment N6660426Q0321 Amendment 1. All other terms and conditions remain unchanged. 



Please see attachments for details on this opportunity. 

More opportunities from Department Of Defense → Nuwc Division Newport

Same awarding agency

NAICS: 236220
New
Federal
Construction - NUWCDIVNPT - Consolidated Secure Facility
Solicitation # N6660426R0163
The Naval Undersea Warfare Center Division Newport is soliciting proposals for the design and construction of the B162 Consolidated Secure Facility, a high-security project requiring full compliance with stringent federal and defense standards. The requirement is a 100% Small Business Set-Aside under NAICS code 236220, with a size standard of $45 million, and small businesses must perform at least 50% of the work. Proposals must be submitted electronically by the revised deadline of July 31, 2026, with formal response due by August 12, 2026. The contract is structured as a Firm Fixed Price arrangement, covering a single job and one lot for construction submittals, with performance to begin within 10 days of award and complete within 365 days. The facility will be constructed at Naval Station Newport, Rhode Island, and must meet rigorous security, acoustic, and physical standards to achieve Sensitive Compartmented Information Facility (SCIF) and Special Access Program Facility (SAPF) accreditation. Offerors must provide detailed technical narratives on SCIF/SAPF design, site security during construction, a Construction Security Plan, preliminary conceptual drawings, and a project schedule, all organized into specified volumes with strict formatting, page limits, and PDF searchability requirements. Contractors must be registered in SAM.gov and possess the necessary roles to request controlled attachments, including the Conceptual Layout Plan, Area Site Plan, and Site Utility Plan, which are critical to proposal development. The solicitation mandates that offerors hold a facility clearance and safeguarding clearance as specified in the DD Form 254 at time of submission and secure Top Secret/SCI clearances for designated personnel within ten days of performance commencement. Key personnel—including a Project Manager with 7 years of federal construction experience and 5 years on ICD/ICS 705 facilities, and a Superintendent with 10 years of experience—must be identified with resumes and cannot be substituted without government approval. Compliance with CMMC for handling Controlled Unclassified Information, adherence to NAVSEA packaging prohibitions, use of Wide Area Workflow for all invoicing and payment submissions, and full disclosure of organizational conflicts of interest with mitigation plans are mandatory. The evaluation process uses a tradeoff analysis with a pass/fail gate for technical approach: proposals must achieve at least an “Acceptable” rating under Factor I to be eligible, and award will be based on best value, giving primary
Commercial and Institutional Building Construction

POSTED

about 14 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332313
New
Federal
Closure Protective Covers (CPCs)
Solicitation # N6660426Q0288
The Naval Undersea Warfare Center Division, Newport (NUWCDIVNPT) is soliciting bids for the procurement of Closure Protective Covers (CPCs) under solicitation N66604-26-Q-0288. This is a Firm Fixed Price contract with a maximum funding limitation of $197,000.00. While originally a small business set-aside, Amendment 0002 changed the status to full and open competition. The requirement is divided into three CLINs: a first article unit, production units, and the delivery of data per the Contract Data Requirements List. Award will be made on a Lowest Price Technically Acceptable (LPTA) basis to the vendor proposing the greatest quantity of production units within the $197,000.00 budget. To be considered technically acceptable, offerors must provide completed pricing tables and demonstrate cybersecurity compliance, including an active CMMC Level 2 (Self) or higher assessment and a NIST SP 800-171 DoD Assessment score posted in the Supplier Performance Risk System (SPRS). Access to export-controlled government drawings requires a valid Joint Certification Program (JCP) certification. Deliverables must be manufactured in accordance with drawing JCM-14865-001 and include a comprehensive Certificate of Compliance (CoC) documenting material validations and test results for all components. Shipping is FOB Destination to Newport, RI, and the government's preferred payment method is via Government Purchase Card.
Plate Work Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 14 days
View Details
NAICS: 541380
New
Federal
Aeration Blower and Silencer Vibration and Shock Fixture Fabrication
Solicitation # N6660426Q0459
Solicitation N66604-26-Q-0459 is a firm-fixed-price request for quotes from the Naval Undersea Warfare Center Division, Newport, for the fabrication and assembly of two specific test fixtures: one CHT Aeration Blower Fixture Assembly and one Discharge Silencer Fixture Assembly. The contractor is responsible for procuring materials, including copper-nickel piping, and performing welding and assembly to replicate a shipboard environment in accordance with Mil-DTL-901E and Mil-Std-167A. The work will be performed at the contractor's facility and at NUWCDIVNPT, where the contractor must provide on-site technical personnel to support government-executed fitment evaluations. Key deliverables include a Fabrication and Inspection Report due within five business days of assembly completion and a final Summary Report detailing fabrication and fitment testing. The desired delivery date for the assemblies is January 15, 2027, with delivery terms set as FOB Destination, Newport, RI. Award is based on the lowest price technically acceptable, with the government reviewing past performance via the Supplier Performance Risk System. Offerors must be registered in SAM, provide a CAGE code for drawing access, and achieve CMMC Level 2 (Self) certification prior to award. Quotes are due by September 11, 2026, and must include all shipping costs within the unit price.
Testing Laboratories and Services

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 650+ contractors already using CLEATUS