Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

TROLLEY, SINGLE STOR

Active
SPE8EF-26-T-1486Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for the procurement of 14 single-story trolleys under NSN 1730-01-059-2802, issued as a Small Business Set-Aside through solicitation SPE8EF-26-T-1486 with a response deadline of August 3, 2026, and an anticipated delivery date 167 days after award. The item is classified under NAICS code 336413 and is being acquired by the Department of Defense for performance at New Cumberland, Pennsylvania. The solicitation incorporates mandatory technical and quality requirements from the DLA Master List, and imposes strict controls on export-controlled technical data governed by ITAR or EAR, requiring compliance with DFARS 252.225-7048. Access to such data is restricted to contractors with approved US/Canada Joint Certification Program status, completed DLA export control training, and formal authorization from DLA. Additional requirements include adherence to DLA packaging standards, removal of government identification from non-accepted supplies, and the handling of covered defense information. The contractor must also be a Cybersecurity Maturity Model Certification Level 2 Certified Third-Party Assessment Organization. The point of contact for the solicitation is Russell Keiser, reachable via email and phone provided in the contract data.

General Info

Procurement of 14 trolleys under NSN 1730-01-059-2802 for DoD, Small Business Set-Aside, ITAR/EAR controlled, CMMC Level 2 required.

Agency

Department Of Defense → CONSTRUCTION & EQUIPMENT MANU & CONView Agency

NAICS

336413 - Other Aircraft Parts and Auxiliary Equipment ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

SBA

Documents

(1)

SPE8EF-26-T-1486.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → CONSTRUCTION & EQUIPMENT MANU & CON
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → CONSTRUCTION & EQUIPMENT MANU & CON
View Agency Profile
Office AddressUS
Contacts
Russell Keiser
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
TROLLEY,SINGLE STOR
TROLLEY<(>,<)> SINGLE STORES
RD005: Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO) RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD002, COVERED DEFENSE INFORMATION APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 1730-01-059-2802 Quantity: 14 EA Purchase Request: 7017586110QTY: 14 Delivery: 167 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 336413
New
DIBBS
PARTS KIT, JACKThis contract pertains to the procurement of a Parts Kit, Jack, identified by NSN 1730-00-673-4718 and part number TES3-3, with a total quantity of 16 units, each to be delivered at a unit price of $16.00, resulting in a total contract value of $256.00. The delivery is to be made FOB origin within 167 days from the solicitation, with no variance allowed in quantity, and inspection and acceptance occur at the destination. All packaging must comply strictly with ASTM D3951 and MIL-STD-129 for marking and labeling, and palletization must adhere to DLA’s Packaging Requirements for Procurement, which supersede all other standards. The DLA Master List of Technical and Quality Requirements takes precedence over all other specifications, and covered defense information protocols apply. The item is subject to a total small business set-aside under NAICS code 336413, and the delivery destination is DLA Distribution Jacksonville at Bldg 175, Swan Road, Jacksonville, FL 32212-0103, with Russell Keiser listed as the primary point of contact. The original required delivery date is December 5, 2026, with a revised ship date of January 18, 2027.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 336413
New
DIBBS
PUMP ASSEMBLY, CYLINThe contract is for the procurement of one unit of a pump assembly, cylinder, identified by NSN 1730-00-140-2526 under purchase request 7017585531, with a delivery requirement of 167 days after award. The solicitation number is SPE8EF-26-T-1501, posted on July 22, 2026, with responses due by August 3, 2026. It falls under NAICS code 336413 and is categorized as a federal procurement by the Department of Defense under the Construction & Equipment Manu & Con organization. Performance is required at New Cumberland, Pennsylvania, 17070-5002. The contract incorporates technical and quality requirements from the DLA Master List of Technical and Quality Requirements, with compliance based on the version in effect at the time of solicitation or award depending on acquisition type. Cybersecurity Maturity Model Certification Level 2 self-assessment is mandated, and the handling of covered defense information is required. Packaging must meet DLA standards, and government identification must be removed from any non-accepted supplies. The primary point of contact is Raymond Horn, reachable via phone and email provided.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 336413
New
DIBBS
LINER, ACTUATORThe contract pertains to the procurement of LINER, ACTUATOR with part number 292340, sourced from Linear Motion LLC, and also includes alternate suppliers Ontic Engineering & Manufacturing Inc and Mistequay Group Ltd with part number CA67818-001. The item is designated as a critical application item and is governed by stringent technical and quality standards outlined in the DLA Master List of Technical and Quality Requirements, which override any other referenced standards. The contract mandates adherence to MIL-STD-1916 or ASQ H1331 for sampling, with zero non-conformances required unless otherwise specified, and applies specific verification levels and AQLs for critical, major, and minor attributes. Configuration changes require formal engineering change proposals or variance requests, and all non-accepted supplies must have government identification removed prior to return. Packaging must comply with ASTM D3951 and MIL-STD-129, with palletization following DLA’s RP001, and all items must be clearly marked as per RQ017. Delivery is FOB origin, with inspection and acceptance occurring at destination after a 170-day delivery window, and the quantity is fixed at 14 units with no variance permitted. The unit price is $14.00, totaling $196.00, and the NSN is 1680-00-492-0817. The required delivery date is September 22, 2027, with a need ship date of January 17, 2027. All shipments must be routed to DLA Distribution Depot Hill at Hill AFB, Utah, following DLAD procedural notes C19 and C20 for transportation and first destination logistics.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
LIGHT, NAVIGATIONAL,The contract pertains to the procurement of 70 units of a navigational light, identified by NSN 6220-01-628-9651 and part number 34000-7 manufactured by GLAMOX AQUA SIGNAL CORPORATION, under solicitation SPE8E7-26-T-3386. Delivery is required within 167 days from the award date, with terms set at FOB origin and no variance allowed in quantity, meaning exactly 70 units must be delivered. Inspection and acceptance occur at the destination, and packaging must comply fully with MIL-STD-2073-1E and MIL-STD-129 for marking, including precise codes for packaging methods, materials, and containers as specified. The item is subject to DLA’s Packaging Requirements for Procurement and Hazmat packaging standards, with shipments directed to the DLA Distribution facility in New Cumberland, Pennsylvania. The contract incorporates technical and quality requirements referenced from the DLA Master List, and all provisions are governed by the version of the master in effect on the solicitation issue date. The original delivery deadline is December 14, 2026, but the needed ship date is set for January 18, 2027, allowing time for processing and logistics. Payment is based on a unit price of $70, resulting in a total contract value of $4,900. The point of contact for inquiries is Kelly Mitchell of the Department of Defense, with all correspondence and compliance governed under DLA procedures and federal acquisition standards.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 336413
New
DIBBS
PARTS KIT, HYDRAULIC
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 336413
New
DIBBS
BRAKE, CASTER ASSEMBThe contract solicitation is for a Brake, Caster Assembly with NSN/Part Number 1730-00-129-8652, requiring a quantity of nine units under Purchase Request 7017585489. The delivery window is set at 167 days ADO, and the solicitation number is SPE8EF-26-T-1481, issued by the Department of Defense through the Construction & Equipment Manu & Con agency. Offers must be submitted by the response deadline of August 3, 2026, with the solicitation posted on July 22, 2026. The North American Industry Classification System code is 336413, indicating the procurement falls under the manufacturing of aircraft parts and accessories. Performance is to occur at Robins AFB, Georgia, with Russell Keiser identified as the primary point of contact for inquiries. The contract incorporates all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, and the applicable version is determined by the solicitation issue date or any subsequent amendment. Government identification must be removed from non-accepted supplies as per RQ011 requirements. No bidset is available from DLA, and the alternate offeror must provide a complete data package including specifications for both approved and alternate parts, with no sampling data currently available.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 336413
New
DIBBS
MAINTENANCE PLATFORThis contract, issued under solicitation SPE8EF-26-T-1505 by the Department of Defense through the Defense Logistics Agency, specifies the procurement of one unit of a maintenance platform identified by NSN 1730-01-694-8732 and part number MXPS-SD-KIT-USN. The item must be delivered FOB origin within 167 days of the requirement, with no variance allowed in quantity, and is subject to inspection and acceptance at the destination. Packaging and labeling must comply with MIL-STD-129 and ASTM D3951, with precedence given to DLA Master List of Technical and Quality Requirements, and palletization must adhere to DLA Packaging Requirements for Procurement. Cybersecurity requirements mandate a CMMC Level 2 Self-Assessment, and all documentation must reflect compliance with guidelines for handling covered defense information and the removal of government identification from non-accepted supplies. The delivery destination is identified as DLA District San Joaquin in Tracy, California, with the required ship date set for January 18, 2027, following an original delivery deadline of January 9, 2027. The contract references applicable technical and quality standards through DLA’s official eProcurement portal and requires adherence to specific unit of issue and packaging configurations. The point of contact for this solicitation is Russell Keiser, and the NAICS code for the acquisition is 336413, indicating its classification under construction and equipment manufacturing.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 336413
New
DIBBS
FLUID SERVICE UNITThe Fluid Service Unit contract under solicitation SPE8EF-26-T-1488 specifies the procurement of four units with NSN 1730-01-088-4611 and part number 630AS100-11, to be delivered FOB origin within 167 days of the contract award, with a required ship date of January 18, 2027 and an original delivery deadline of July 20, 2027. The units must comply with stringent technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, and packaging must adhere to MIL-STD-2073-1E and MIL-STD-129, including specific preservation, wrapping, and palletization protocols per DLA Packaging Requirements. The delivery destination is DLA Distribution Red River, Receiving Building 499 in Texarkana, TX, and inspection and acceptance occur at the destination with zero variance allowed in quantity. The contract mandates Cybersecurity Maturity Model Certification (CMMC) Level 2 self-assessment compliance and applies covered defense information protocols. Payment terms are set at $4.00 per unit, totaling $16.00, with the unit of issue being each. The procurement is governed by DLA procedures for transportation and freight, and the solicitation was posted on July 22, 2026, with a response deadline of August 3, 2026, under NAICS code 336413 for aircraft and parts manufacturing.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 336413
New
DIBBS
COVER, AIRCRAFT GROUThis contract pertains to the procurement of eight aircraft cover units, identified by NSN 1730-01-692-2667 and part number 23060203, supplied by L&C PROTEC, INC. The item is classified as a critical application component and must adhere to all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, which supersede any other standards such as ASTM D3951. Packaging must conform to MIL-STD-129 for marking and labeling, and palletization must comply with DLA’s specific packaging requirements outlined in RP001. The unit of issue is each, with a contract unit price of $8.00, totaling $64.00. Delivery is scheduled for 167 days after award, with FOB origin terms, and inspection and acceptance occur at the destination warehouse in Tracy, California. The item must be delivered no later than February 21, 2027, with an original need date of January 18, 2027. Cybersecurity compliance is mandated at CMMC Level 2 via self-assessment, and covered defense information protocols apply. All government identification must be removed from non-accepted supplies, and the contract is subject to DoD unit of issue standards as referenced in the official DLA documentation. The procurement is under solicitation SPE8EF-26-T-1494, issued by the Department of Defense, with Russell Keiser as the primary point of contact.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 336413
New
DIBBS
WHEEL, ABRASIVE
DDSP NEW CUMBERLAND FACILITY

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 336413
New
DIBBS
BALL AND SEAT ASSEMThe contract pertains to the procurement of three BALL AND SEAT ASSEM units, identified by NSN 1630-01-036-6507, under solicitation SPE4A5-26-T-305D, with a response deadline of July 30, 2026, and a delivery requirement of 170 days after award. The item is not subject to Item Unique Identification per the Service customer’s request, and no shelf life restrictions apply. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation or award date depending on acquisition size. Cybersecurity compliance is mandated at CMMC Level 2 via self-assessment, and the contract incorporates DLA packaging standards, requirements for the removal of government identification from non-accepted supplies, and physical marking of bare items. Documentation for source approval requests is required, and measuring and test equipment must meet adequate data standards. The place of performance is Tracy, California, with Courtney Minor of the ASC Supplier Oper OEM Division listed as the primary point of contact. The NAICS code 336413 indicates this is for aircraft and spacecraft component manufacturing, and the contracting agency is the Department of Defense.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
FITTINGThis contract pertains to the procurement of a fitting identified by NSN 1560-01-256-2172 and part number 209-064-224-101, manufactured via a metal casting process requiring specialized tooling. The item is classified as a critical application item and must comply with stringent technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, with sampling procedures governed by MIL-STD-1916 or ASQ H1331 Table 1, enforcing zero non-conformances unless otherwise stated. Attributes are assigned specific verification levels or AQLs, and all marking and packaging must adhere to MIL-STD-129 and MIL-STD-2073-1E, with palletization following DLA packaging requirements. The item is to be delivered FOB origin within 20 days, with no variance allowed in quantity, and inspection and acceptance occur at the point of origin. The contractor is required to meet Cybersecurity Maturity Model Certification (CMMC) Level 2 self-assessment standards and must submit documentation for source approval as outlined in RC001. The delivery destination is the Taiwan Army Zuo-Ying Ammunition Sub facility, with freight forwarding instructions referencing DLAD procedural notes. The purchase request number is 7017584377 with a total price of $144.00 for 12 units at $12.00 each, and the contract is issued under solicitation SPE4A5-26-T-304U with an original delivery deadline of July 24, 2026. The supplier must utilize the designated unit of issue and comply with all government-specific identifiers and data codes, including the manufacturer's code PTWZ5V62012654 and project code TP 2. Direct contact for sourcing, tooling, or material assistance is provided through DLA’s Aviation or Land and Maritime Supply Chain teams.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details

More opportunities from Department Of Defense → CONSTRUCTION & EQUIPMENT MANU & CON

Same awarding agency

NAICS: 314994
New
DIBBS
ROPE, FIBROUSThe contract is for the procurement of fibrous rope with the NSN 4020-01-657-0034 and a quantity of 1,100 feet, under solicitation SPE8EE-26-T-2155. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which supersede other standards such as ASTM D3951, even though packaging must initially comply with ASTM D3951. Packaging and labeling must adhere strictly to MIL-STD-129, with palletization following DLA Packaging Requirements for Procurement, and all units must be marked with the correct Unit of Issue and Quantity per Unit Pack. The delivery is FOB origin, with inspection and acceptance occurring at the destination, and the contractor must deliver within 167 days from the award date, with a required ship date of January 18, 2027. Quantity tolerance allows for a 10% variance above or below the ordered amount. The delivery address is the DLA Distribution San Joaquin facility in Tracy, California, and transportation compliance must follow DLAD Procurement Notes C19 and C20. The contract includes provisions for the removal of government identification from non-accepted supplies and may involve covered defense information. The purchase request number is 7017585975, and the point of contact is Philip Ferrara, with all details tied to the DLA’s authorized unit of issue system.
Rope, Cordage, Twine, Tire Cord, and Tire Fabric Mills

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333612
New
DIBBS
SLING, CARGO, NETThe contract pertains to the procurement of 13 units of a cargo sling net with NSN 3940-01-714-3857, under solicitation number SPE8EE-26-T-2149, issued by the Defense Logistics Agency. The item must be delivered FOB origin within 167 days of contract award, with no variance allowed in quantity and inspection and acceptance occurring at the destination. All packaging must comply with ASTM D3951 as supplemented by the DLA Master List of Technical and Quality Requirements, which takes precedence, and labeling and marking must adhere to MIL-STD-129. Palletization is governed by DLA Packaging Requirements for Procurement, and the unit of issue is each. Delivery is directed to the DLA Distribution facility at New Cumberland, Pennsylvania, with a required ship date of January 18, 2027, though the original delivery target was November 9, 2026. The contract incorporates federal acquisition regulations and specifies that covered defense information may apply. Payment is set at $13.00 per unit, totaling $169.00, and transportation logistics are governed by DLAD procedural notes C19 and C20. The point of contact for inquiries is Philip Ferrara, with solicitation responses due by August 3, 2026.
Speed Changer, Industrial High-Speed Drive, and Gear Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 313110
New
DIBBS
ROPE, FIBROUSFibrous plaited rope meeting specification MIL-R-24537 is being procured under solicitation SPE8EE-26-T-2137 with a total quantity of 11 reels, each containing 1,200 feet of rope, for a cumulative length of 13,200 feet. The rope must have a 3-inch circumference and be packaged in accordance with MIL-STD-2073-1E, with marking compliant with MIL-STD-129 and no special marking required. Delivery is required within 67 days of contract award, with shipments originating from the supplier and delivered FOB origin to two destinations: San Diego, California and New Cumberland, Pennsylvania. The government will inspect and accept the product at the destination. Strict adherence to the Qualified Suppliers List for Manufacturers/Distributors (QSLM/QSLD) is mandatory; only suppliers listed on this registry are eligible for award, and deviations must be explicitly declared. Any non-compliant product will be considered an unauthorized substitution with potential criminal liability. The contract includes prohibitions against intentional addition of mercury or mercury-containing compounds, with limited exceptions for specific functional applications as defined by NAVSEA, and all portable mercury-containing devices must have double containment. Quality conformance inspections, source inspection, and certain testing requirements are waived for qualified suppliers, relying instead on manufacturer certification. Packaging, marking, and shipping instructions follow DoD standards, and the solicitation is a total small business set-aside under NAICS code 313110, with a response deadline of August 3, 2026, and a need ship date extending to December 2026.
Fiber, Yarn, and Thread Mills

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 314994
New
DIBBS
CORD, FIBROUSThis contract is for the procurement of fibrous cord under NSN 4020-01-013-4086, specifying Type 1 cord in camouflage green 383, conforming to Fed-Std-595C Chip Number 34094 and MIL-C-83242A Revision A dated 11/11/2025. The cord must be put up on 500-yard spools and packaged in accordance with ASTM D3951, with all labeling and marking strictly following MIL-STD-129. The DLA Master List of Technical and Quality Requirements takes precedence over any other packaging standards. Only manufacturers and distributors listed on the Qualified Suppliers List for Manufacturers (QSLM) or Distributors (QSLD) are eligible to bid, and non-compliance with this requirement constitutes a deviation that must be explicitly declared. The government waives inspection requirements for suppliers who comply with the QSL program, except in cases of Foreign Military Sales. The order quantity is 26 units, each unit being one 500-yard spool, with a unit price of $26.00, totaling $676. Delivery is required FOB origin with no variance allowed in quantity and inspection and acceptance occurring at the destination. The required delivery date is December 24, 2026, with a 167-day allowable delivery window ending January 18, 2027. The item is classified as a critical application item, and the contract is a total small business set-aside under NAICS code 314994. All packaging must be palletized in compliance with DLA packaging requirements, and shipments must be sent to the specified delivery point in Tracy, California. Failure to adhere to QSL program terms may result in criminal penalties in addition to civil remedies.
Rope, Cordage, Twine, Tire Cord, and Tire Fabric Mills

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 488190
New
DIBBS
MANIFOLD VALVE, AIRCThe contract specifies the procurement of a Manifold Valve, Aircraft with NSN 1730-01-528-9938 and part number 66353 from TESCOM CORP, for a total quantity of 31 units at a unit price of $31.00, resulting in a total contract value of $961.00. Delivery is required FOB origin with a delivery window of 223 days from the contract award, with the original required delivery date set for March 17, 2027, and a need ship date of March 15, 2027. The inspection and acceptance points are both at the destination, and no quantity variance is permitted. Packaging must comply with ASTM D3951 and MIL-STD-129 for marking and labeling, while palletization must adhere to DLA Packaging Requirements for Procurement, with precedence given to all applicable DLA Master List of Technical and Quality Requirements over ASTM standards. The item must be shipped to DLA Distribution San Diego at 3581 Cummings Road, Building 3581, San Diego, CA 92136-3581, with transportation governed by DLAD Proc Notes C19 and C20. The solicitation, issued under SPE8EF-26-T-1497, is a Women-Owned Small Business Set-Aside with a response deadline of August 3, 2026, and incorporates mandatory cybersecurity compliance through CMMC Level 2 Self-Assessment. Covered Defense Information requirements apply, and government identification must be removed from non-accepted supplies. The unit of issue is each, and compliance with all referenced DLA technical and quality standards is mandatory.
Other Support Activities for Air Transportation

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333914
New
DIBBS
NOZZLE, FUEL AND OILThe contract is for the procurement of 51 units of a NOZZLE, FUEL AND OIL with NSN 4930-01-661-7722 under solicitation number SPE8EE-26-T-2162, issued as a Total Small Business Set-Aside through the SBA program. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, and the applicable revision is determined based on solicitation or award date depending on acquisition size. Packaging must comply with DLA packaging standards, and any non-accepted supplies must have government identification removed prior to return. The delivery timeline requires fulfillment within 167 days after award, with performance location specified as New Cumberland, Pennsylvania, ZIP 17070-5002. The solicitation was posted on July 22, 2026, with responses due by August 3, 2026, and the NAICS code 333914 identifies the industry as Other Engine Equipment Manufacturing. The contracting office is part of the Department of Defense under the Construction & Equipment Manu & Con organization, with Philip Ferrara listed as the primary point of contact reachable via email and phone. All details are accessible through the DIBBS platform using the provided UI link.
Measuring, Dispensing, and Other Pumping Equipment Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333924
New
DIBBS
ADAPTER, LIFT TRUCKThe contract is for the procurement of five hydraulic lift truck adapters under NSN 3930-01-710-7806 and part number 000963-243-1, issued by the Defense Logistics Agency through solicitation SPE8EF-26-T-1504, with a full small business set-aside designation. The delivery requirement is for 167 days after award, with goods to be shipped FOB origin and inspected and accepted at the destination. The unit of issue is each, with a fixed price of $5.00 per unit and no variance allowed in quantity. Packaging and marking must conform to MIL-STD-129 and ASTM D3951, but all DLA Master List of Technical and Quality Requirements take precedence over ASTM standards. Packaging must comply with DLA’s RP001 requirements, including palletization standards, and government identification must be removed from any non-accepted supplies. The delivery destination is DLA Distribution at the New Cumberland Facility in Pennsylvania, and the need ship date is January 18, 2027, with the original delivery deadline set for February 11, 2027. Transportation instructions reference DLAD Proc Notes C19 and C20, and all technical and quality specifications referenced are governed by the DLA Master List in effect at the time of solicitation issuance.
Industrial Truck, Tractor, Trailer, and Stacker Machinery Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 488190
New
DIBBS
SLING, ENDLESSThe contract pertains to the procurement of 24 units of an endless sling identified by NSN 3940-01-623-5026, with a delivery requirement of 167 days after award. The solicitation, numbered SPE8EE-26-T-2157, was posted on July 22, 2026, with responses due by August 3, 2026, and is categorized under NAICS code 488190. It is a federal procurement managed by the Department of Defense under the organization Construction & Equipment Manu & Con, with performance taking place in Tracy, California, zip 95304-5000. The contract incorporates all applicable technical and quality requirements referenced by R or I numbers from the DLA Master List of Technical and Quality Requirements, with the governing revision determined by the solicitation issue date for simplified acquisitions or the amendment date if revised. Coverage under DLA Packaging Requirements for Procurement is mandatory, and the product is subject to potential handling under Covered Defense Information protocols. The government requires the removal of its identification from any non-accepted supplies, and Philip Ferrara is the primary point of contact for inquiries.
Other Support Activities for Air Transportation

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details