Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Tube Bending and Flare Tube Machines Luke AFB, AZ

Awarded

FA488726P0108Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract, identified by solicitation number FA488726P0108, involves the procurement of tube bending and flare tube machines for Luke Air Force Base in Arizona. Issued by the Department of Defense under the 56 Cons Cc office, the project is designated as a total small business set-aside under NAICS code 333517. The performance of the contract will take place at Luke Air Force Base, Arizona. Primary coordination for this award is managed by 2d Lt Angelo Donisi, with Jacqueline C. Aranda serving as the secondary point of contact.

General Info

DoD procurement of tube bending and flare machines for Luke Air Force Base.

Agency

Department Of Defense → FA4887 56 Cons Cc

Contract Value

$408,900

NAICS

333517 - Machine Tool Manufacturing

Place of Performance

Luke Air Force Base, AZ, 85309, USA

Set-Aside

SBA

Awardee

TUBE-LINE TECHNOLOGIES CORPORATION

Award Issued Date

09/22/2026, 12:00:00 AM UTC

Documents

0

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseAwarded

PostedSep 23

Award Notice

AwardedSep 22

Contract was awarded

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → FA4887 56 Cons Cc

Contacts2 people available

OfficeLUKE AFB, AZ, 85309-1217, USA

Organization / AgencyDepartment Of Defense → FA4887 56 Cons Cc

Office AddressLUKE AFB, AZ, 85309-1217, USA

Contacts

d Lt Angelo Donisi

contact@example.gov

+1 (555) 000-0000

Jacqueline C. Aranda

contact@example.gov

Full Description

Show more

https://api.sam.gov/prod/opportunities/v1/noticedesc?noticeid=e1404ce25fb04eae8a86ffbbf75624bb

Similar Contracts

Same NAICS industry code

Supply of Machine Bolts (P/N AN3-21A)

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 18 hours ago

DEADLINE

Milling Equipment

Solicitation # RFQ511741

Oak Ridge National Laboratory, under the Department of Energy, is soliciting firm fixed price quotations for a compact, high-speed machining system, specifically a Datron Neo milling machine and accessories or a domestic equivalent. The procurement includes the delivery, installation, and operational setup of the machining system, an SRI latching system, and associated auto tool management software. Award will be based on the lowest priced, technically acceptable proposal. All electrical equipment must be labeled and evaluated by a nationally recognized testing laboratory at the seller's expense. Proposals are due by October 23, 2026, and must include a firm fixed price quotation, a proposed delivery schedule, and completed representations and certifications. The contract incorporates several critical regulatory requirements, including Brand Name or Equal provisions, Buy American preferences for supplies exceeding 15,000 dollars, and strict cybersecurity compliance with NIST SP 800-171. Payment is set at Net 30 via electronic funds transfer, with invoicing handled through the Ariba network. Offerors must also certify their status regarding export controls, child labor, and the use of federal funds for lobbying if the offer exceeds 200,000 dollars.

Ornl Ut-Battelle Llc-Doe Contractor

POSTED

about 23 hours ago

DEADLINE

CNC Lathe Equipment SupplierThe CNC Lathe Equipment Supplier subcontract, issued by the University of Texas at Austin, requires the procurement and delivery of one fully functional industrial-grade CNC Lathe. The equipment must strictly adhere to the technical specifications outlined in the CNC Lathe Pricing Schedule BT-57IY. To be eligible, the supplier must be an Original Equipment Manufacturer or an authorized reseller and distributor that maintains compliance with Executive Order GA-48. This opportunity is categorized under NAICS code 333517 and is intended for prime contractors working on industrial equipment procurement projects. Interested parties must submit their responses by the deadline of October 30, 2026, at 8:30 PM. The selected provider is responsible for ensuring the machine is delivered and operational at the designated site.

University of Texas at Austin

POSTED

DEADLINE

Solicitation # 721-27031

The University of Texas at Austin, on behalf of Applied Research Labs, is soliciting bids for the procurement of a CNC Lathe under solicitation number 721-27031. This opportunity is open to qualified vendors who are either the original manufacturer or an authorized reseller and distributor of the equipment. Bidders must submit their responses via the public portal by October 30, 2026, at 2:30 PM CDT, and must explicitly indicate their intent to bid by this same deadline to be eligible for submission. Key requirements for a valid bid include the submission of a specific CNC Lathe Pricing Schedule in Excel format, a Pricing and Delivery Schedule Form in PDF, and a statement of acceptance regarding all terms and conditions found in the solicitation and Attachment Two. Bidders are required to specify the number of calendar days needed for delivery following the receipt of the contract and must acknowledge compliance with Executive Order GA-48 and the SUA Program for payment. The procurement is categorized under NIGP code 07543 for Lathes, Armature and Brake Drum.

University of Texas at Austin

POSTED

DEADLINE

Custom Test Fixture and Jig FabricationThis subcontract for Custom Test Fixture and Jig Fabrication supports Navsup Weapon Systems Support projects within the Department of Defense. The scope of work involves the design and fabrication of specialized manufacturing aids, jigs, dies, and custom fixtures, patterns, or mylars specifically for the disassembly and reassembly of part number 4705-03000-15-101. All production must be executed using precision machining equipment and strictly adhere to the technical data package provided in the prime contract. The project falls under NAICS code 333517 and requires the delivery of physical tooling and manufacturing aids. The solicitation was posted on October 16, 2026, with a response deadline set for November 16, 2026.

Navsup Weapon Systems Support

POSTED

DEADLINE

Supply of Valve Lapping Tool (NSN 5120016205982)This subcontract involves the manufacture and supply of one precision valve lapping tool, identified by NSN 5120016205982, for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The tools must be produced according to TDP Rev A Gen 1 and specific Robert E. Krueger part numbers 1000601-ST-24-LD or 100601-X-XT-24-LD. Strict adherence to military standards is required, with quality assurance performed per MIL-STD-1916 or ASQ H1331, and packaging conducted according to MIL-STD-2073-1E and MIL-STD-129. The project falls under NAICS code 333517, with the place of performance located in New Cumberland. The response deadline for this opportunity is October 23, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

KNURLING TOOL, MACHI

Solicitation # SPE8E9-27-T-0241

Solicitation SPE8E9-27-T-0241 is a request for quotations issued by DLA Troop Support, Construction and Equipment MRO SVC I, for the procurement of one machine knurling tool, identified by NSN 3455011849992. The requirement is classified under NAICS code 333517. The original required delivery date was September 11, 2024, with a delivery lead time of 20 days. While some documents list FOB Destination, the procurement is issued under the First Destination Transportation program, requiring offers to be submitted based on FOB Origin. Delivery is to be made to the 109 AW LGS in Scotia, New York. The contract mandates strict adherence to technical and quality requirements found in the DLA Master List and specifies packaging and marking standards according to MIL-STD-2073-1E, MIL-STD-129, and PPP-P-40. Inspection and acceptance will occur at the destination per FAR 52.246-1. Key compliance requirements include the Buy American Act, the Berry Amendment, and NIST SP 800-171 for cybersecurity. Additionally, the contractor must ensure that mercury or mercury-containing compounds are not intentionally added to the hardware. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

Intent to Sole Source Hartwig Okuma Lathe

Solicitation # MSU-SolSour-2027-0878

Montana State University Procurement and Contract Services has issued an Intent to Sole Source notice, solicitation number MSU-SolSour-2027-0878, regarding the procurement of an Okuma LB2000EX-III lathe. The university is considering a request from the Mechanical and Industrial Engineering Department to award this contract specifically to Hartwig. This notice is not a request for competitive proposals, but it invites interested vendors to submit detailed written responses via the eMACS portal by October 22, 2026, at 2:30 PM MDT. Submitting vendors must provide comprehensive company information and a technical response detailing how they can provide the services outlined in the attached Letter of Intent. The contract administration specifies payment terms of 0% O, Net 30. Jeni Luft serves as the primary point of contact for this action, which was posted on October 15, 2026. No specific contract value, delivery schedule, or evaluation weights have been disclosed in the provided documentation.

POSTED

DEADLINE

Intent to Sole Source Hartwig Okuma Lathe

Solicitation # MSU-SolSour-2027-0873

Montana State University Procurement and Contract Services has issued an Intent to Sole Source notice, solicitation number MSU-SolSour-2027-0873, for the acquisition of an Okuma LB2000EX-III lathe. The procurement is intended to support the university's Department of Mechanical and Industrial Engineering, with Hartwig identified as the proposed sole source provider. While this is not a request for competitive proposals, the university is inviting other potential vendors to submit detailed technical descriptions of equivalent products via the eMACS portal between October 15, 2026, and October 30, 2026. Interested respondents must provide comprehensive company information and a detailed written response explaining how they can meet the requirements outlined in the Letter of Intent. The submission deadline is October 30, 2026, at 9:30 AM MDT. Administrative details for the procurement include a NAICS code of 333517 and payment terms of 0% O, Net 30. Jeni Luft serves as the primary point of contact for this action.

POSTED

DEADLINE

Precision Latching and Tooling SupplierThis subcontract, titled Precision Latching and Tooling Supplier, involves the provision of specialized SRI latching systems and printed wire solder components for prime contractors working on Department of Energy projects at Oak Ridge National Laboratory. The supplied materials must be compatible with high-speed milling systems and adhere to Buy American preferences. Managed by Ornl Ut-Battelle Llc under the Department of Energy, the contract falls under NAICS code 333517. Performance of the contract will take place in Oak Ridge, Tennessee. The solicitation was posted on October 15, 2026, with a response deadline of October 23, 2026.

Ornl Ut-Battelle Llc-Doe Contractor

POSTED

DEADLINE

Compact High-Speed Milling Machine SupplierThis subcontract, issued by ORNL UT-Battelle LLC for the Department of Energy, seeks a supplier for a compact high-speed milling machine to be utilized at Oak Ridge National Laboratory. The required equipment must be a standalone floor unit no wider than 32 inches, featuring an integrated touch probe, spindle cooling, a Microjet mist coolant system, vacuum work holding ports, and compressed air connections. To ensure compliance and safety, the machining system must be NRTL labeled and adhere to Buy American requirements. The successful contractor will deliver one fully assembled system to the performance site in Oak Ridge, Tennessee. Responses for this procurement are due by October 23, 2026.

Ornl Ut-Battelle Llc-Doe Contractor

POSTED

DEADLINE

Laser Engravers - UNSPC 27112718 - 43212105

Solicitation # W1985-26B056

The Department of National Defence is issuing Request for Proposal W1985-26B056 for the acquisition, installation, commissioning, and training associated with two laser engraving machines. These machines will be used to produce identification plates and provide permanent marking for parts and equipment utilized by the Canadian Armed Forces. One unit is designated for the 202nd Workshop Depot in Montreal, Quebec, and the second unit will be located at the Land Engineering Support Centre in Ottawa, Ontario. This solicitation is a reissue of a previous tender to incorporate a required amendment and ensure fair access for all interested suppliers. Bidders must utilize only the documents attached to this specific notice, as they supersede all previous versions. Interested parties must submit their bids in accordance with the provided instructions no later than the closing deadline of November 5, 2026.

Department of National Defence

POSTED

DEADLINE

More opportunities from Department Of Defense → FA4887 56 Cons Cc

Same awarding agency

56 CS FOC to Flightline and Wx Equipment, Luke AFB

Solicitation # F3YCFA6173AC01

This firm-fixed-price solicitation, number F3YCFA6173AC01, is a 100 percent Small Business set-aside under NAICS 335921 for the engineering, furnishing, installation, and testing of new 12-strand single-mode fiber optic cable at Luke Air Force Base, Arizona. The project involves connecting Radar Approach Control to several critical facilities, including the Air Traffic Control Tower, Base Operations, Command Post, and various flightline and weather equipment such as Localizers, Glide Slopes, TACAN, and GATR, as well as meteorological stations. The installation will utilize a combination of existing manhole and handhole duct systems and direct burial. The contractor is responsible for providing all new, rust-proof, and corrosion-resistant materials, labor, and supervision, as no government-furnished equipment will be provided. The period of performance is not to exceed 180 calendar days, with a requested delivery date of July 1, 2027. Award will be granted to the responsible vendor with the lowest priced, technically acceptable quote, evaluated based on design, a quality control plan, and performance history via the Supplier Performance Risk System. Technical teams must be certified to EFI&T TC Comm FOTS, and supervisors must hold factory certification from equipment manufacturers. All work must comply with strict environmental guidelines regarding hazardous materials and lead-based paint, and personnel must adhere to Department of the Air Force security and base access protocols. Final acceptance is contingent upon successful OTDR and Optical Power Meter testing in accordance with TIA 526-7 and a final project walk-through.

Fiber Optic Cable Manufacturing

POSTED

about 23 hours ago

DEADLINE

Fiber Optic Material SupplyThis small business set-aside subcontract involves the supply of specialized fiber optic materials for prime contractors working on Department of Defense projects at Luke Air Force Base. The scope of work includes providing 12-strand single-mode armored fiber optic cable, plenum-rated innerduct for building entries, and corrosion-resistant hardware. Additionally, the contractor is responsible for supplying PCNU FOTS and manufacturer recommended spares packages from TCComm, with all materials delivered FOB Destination. The procurement is managed by the FA4887 56 Cons Cc agency under NAICS code 335921. Interested parties must adhere to the response deadline of November 9, 2026. Performance of the contract will take place at Luke Air Force Base in zip code 85309.

Fiber Optic Cable Manufacturing

POSTED

DEADLINE

Geospatial Surveying and As-Built DocumentationThis subcontract opportunity involves providing specialized geospatial surveying and as-built documentation services for prime contractors operating at Luke Air Force Base. The scope of work requires the recording of GPS coordinates for cable routes at 25-foot intervals as well as manhole and handhole lids. All geospatial data must be delivered as ESRI Shape files that are compatible with the Cyberspace Infrastructure Planning System and adhere to FGDC-STD-007.3-1998 standards. Managed by the Department of Defense under the 56 Cons Cc agency, this project is designated as a total Small Business Set Aside under NAICS code 541370. The contract was posted on October 7, 2026, with a response deadline of November 9, 2026. Final deliverables for the project include comprehensive as-built drawings and the required geospatial data files.

Surveying and Mapping (except Geophysical) Services

POSTED

DEADLINE

Underground Conduit and Duct Bank ConstructionThis small business set-aside subcontract involves the construction of underground conduit and duct bank systems for prime contractors at Luke Air Force Base. The scope of work includes excavation, the installation of new ducts, maintenance holes, and handholes, as well as the use of horizontal directional boring for cable paths. Contractors are responsible for installing spacers, tracer wire, and warning tape, while ensuring all work adheres to RUS Bulletin 1751F-643. Additional requirements include full site restoration, specifically sodding and the disposal of slurry off-base. The project is managed under the Department of Defense through the FA4887 56 Cons Cc agency. Interested parties must respond by November 9, 2026, to deliver a completed underground duct bank system as specified in the contract guidelines.

Other Heavy and Civil Engineering Construction

POSTED

DEADLINE

Fiber Optic Splicing, Termination, and TestingThis small business set-aside subcontract involves providing specialized fiber optic splicing, termination, and testing services for prime contractors on projects located at Luke Air Force Base. The scope of work includes performing fusion splicing of pigtails with LC connectors in accordance with UFC 3-580-01 and the installation of Fiber Optic Distribution Panels in wall mounts or 19-inch racks. The contractor is responsible for ensuring the quality of operational fiber links by conducting OTDR and Optical Power Meter tests following TIA 526-7 standards. Final deliverables include the provision of certified installation test reports. This opportunity is managed under the Department of Defense and falls under NAICS code 238210.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

Fiber Optic Cable Installation (OSP)This small business set-aside subcontract involves the installation of 12-strand single-mode fiber optic cable for prime contractors at Luke Air Force Base. The scope of work includes pulling cable through existing manhole and handhole duct systems, performing direct burial along designated routes, and installing cable racks and supports. To ensure proper identification and durability, corrosion-resistant cable tags must be placed every two feet from duct entrances. All work must be performed in strict adherence to RUS Bulletin 1753F-151, and personnel are required to obtain local airfield driving certifications. The project falls under NAICS code 238210 and is managed by the Department of Defense. Interested parties must submit their responses by November 9, 2026.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

CCTV System Hardware SupplyThis small business set-aside subcontract involves the supply of CCTV system hardware for prime contractors working on Department of the Air Force projects at Luke Air Force Base. The scope of work includes the procurement and delivery of high-definition cameras, NVR/DVR recording systems, and mounting brackets that adhere to the Minimum Salient Characteristics established on May 4, 2026. The contractor must ensure that all hardware is not produced by FASCSA-prohibited entities and must provide unique item identifiers for any equipment valued over 5,000 dollars. This effort falls under NAICS code 334220 and is managed by the Department of Defense agency FA4887 56 Cons Cc.

Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

POSTED

about 2 months ago

DEADLINE

CCTV System Installation and IntegrationThis subcontract for the Department of Defense involves the physical installation and integration of a Closed Circuit Television system at Luke Air Force Base. The scope of work includes installing cameras, mounting hardware, and cabling at the warehouse and RV storage lot, followed by system configuration based on the May 4, 2026 Salient Characteristics. The contractor is responsible for testing and commissioning to deliver a fully operational system while adhering to base access requirements and FASCSA telecommunications prohibitions. The project is designated as a Small Business Set Aside under NAICS code 238210. Performance will take place in zip code 85309, with the agency oversight provided by the FA4887 56 Cons Cc.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

about 2 months ago

DEADLINE

Logistics and Delivery to Luke AFBThis contract involves the transportation, packaging, and secure delivery of a Keysight N9040B spectrum analyzer along with its accessories to Luke Air Force Base. The work requires strict adherence to Department of Defense shipping protocols, ensuring all items are handled and transported in compliance with military standards. The contract is categorized as a subcontract under the NAICS code 484220, which pertains to specialized freight trucking services. The delivery location is specified as Luke Air Force Base with a postal code of 85309. The contracting agency is the Department of Defense, specifically under the FA4887 56 Contracting Squadron. The contract was posted on May 28, 2026, but does not specify any set-aside status or detailed organizational data beyond the agency information. This engagement highlights secure logistics operations supporting DoD equipment deployment to an active military installation.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Technical Support and Warranty Services for RF EquipmentThis contract provides ongoing technical support, calibration, maintenance, and warranty services for the Keysight N9040B spectrum analyzer, ensuring its optimal performance and reliability. Services include both remote diagnostics and on-site repairs at Luke Air Force Base, supporting the Department of Defense's operational needs. The contract falls under NAICS code 811212, which pertains to electronic and precision equipment repair and maintenance, and is managed by the 56th Contracting Squadron at Luke AFB. The support arrangement is structured as a subcontract and emphasizes continuous service availability to minimize equipment downtime. By combining remote troubleshooting with hands-on maintenance and repair, the contract aims to maintain the spectrum analyzer’s functionality and extend its service life. This comprehensive technical backing is critical for sustaining mission readiness and operational efficiency at the Air Force base.

Computer and Office Machine Repair and Maintenance

POSTED

DEADLINE

RF Spectrum Analyzer Supply and IntegrationThe contract involves the procurement and integration of a Keysight N9040B spectrum analyzer equipped with additional features, tailored to ensure seamless technical compatibility with existing Keysight RF testing systems. This acquisition supports the Threat Emitter program, enhancing the capability to conduct advanced RF spectrum analysis in alignment with defense requirements. The scope includes both supply and integration services, confirming the equipment's interoperability within the current RF test infrastructure. Awarded as a subcontract under the Department of Defense agency FA4887 56 Cons Cc, the contract falls under NAICS code 334515, which pertains to the manufacturing of instruments and related products. The work will be performed at Luke Air Force Base, zip code 85309. The contract was posted on May 28, 2026, indicating a planned timeframe for delivery and integration activities at this military installation.

Instrument Manufacturing for Measuring and Testing Electricity and Electrical Signals

POSTED

DEADLINE

Vehicle Recompete: Idc FA488722D0005Contract FA488722D0005 is a single-award, five-year indefinite-delivery/indefinite-quantity (IDIQ) firm fixed price vehicle for the Simplified Acquisition of Base Engineer Requirements (SABER). Managed by the Department of the Air Force under the FA4887 56 Cons Cc contracting office, the contract has a total ceiling of 25,000,000 dollars and is designated as an 8(a) sole source set-aside. The ordering period for this vehicle is scheduled to conclude on July 11, 2027. Four Tribes Enterprises, LLC has been the primary recipient of task orders under this vehicle, performing critical infrastructure work including the replacement of chillers, air handlers, generators, and automatic transfer switches across various buildings. While the contract is currently categorized as a pre-forecast for recompete with medium confidence, it continues to support essential engineering and facility maintenance requirements for the Department of Defense.

Commercial and Institutional Building Construction

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS