Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

TUBE, BENT, METALLIC

Active
SPE7M4-26-T-231VFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of 34 units of bent metallic tubing, identified by NSN 4710-01-577-2429 and part numbers 23535263 and 23538503, supplied by Rolls-Royce Solutions America Inc and Daimler Truck North America LLC. Delivery is required within 126 days after order, with a specified delivery date of November 20, 2026, and all items must be shipped FOB origin to the Defense Distribution Depot New Cumberland facility in Pennsylvania. The contract mandates strict compliance with DLA packaging and labeling standards, requiring adherence to ASTM D3951 for packaging and MIL-STD-129 for all marking and barcoding, with the DLA Master List of Technical and Quality Requirements taking precedence over any conflicting standards. Palletization must follow RP001 guidelines, and the unit of issue and quantity per unit pack must be exactly as specified. Inspection and acceptance occur at the destination, with no variance allowed in quantity. All deliveries must be submitted electronically via WAWF, and payment requests must comply with electronic submission protocols. The contract includes numerous FAR and DFARS clauses governing cybersecurity, hazardous materials, whistleblower protections, small business representations, and export controls, with specific emphasis on compliance with the Hazard Communication Standard and prohibitions on hexavalent chromium and covered defense telecommunications equipment. Offerors must provide their UEI and CAGE code, affirm their small business status if applicable, and submit required certifications via SAM. No pricing information is included in the solicitation, and award is expected to be based on compliance with technical, packaging, and regulatory requirements under a firm-fixed-price structure, though evaluation factors and weighting are not disclosed.

General Info

Procurement of 34 bent metallic tubes under DLA solicitation SPE7M4-26-T-231V, response due July 16, 2026.

Agency

Department Of Defense → FLUID HANDLING DIVISIONView Agency

NAICS

331420 - Copper Rolling, Drawing, Extruding, and AlloyingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

RFQ SPE7M4-26-T-231V for DLA Fluid Handling Division

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

1 update
PhaseSolicitation
Posted

Solicitation

Amendment 1

Contract was updated

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → FLUID HANDLING DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → FLUID HANDLING DIVISION
View Agency Profile
Office AddressUS
Contacts
Rory O'Reilly
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
TUBE,BENT,METALLIC
TUBE,BENT,METALLIC
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
ROLLS-ROYCE SOLUTIONS AMERICA INC 72582 P/N 23535263
ROLLS-ROYCE SOLUTIONS AMERICA INC 72582 P/N 23538503
DAIMLER TRUCK NORTH AMERICA LLC 64678 P/N DDE 23535263
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017384668 0001 EA 34.000
NSN/MATERIAL:4710015772429
DELIVERY (IN DAYS):0126
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be
SPE7M4-26-T-231V
SECTION B
PR: 7017384668 PRLI: 0001 CONT’D
as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:11/20/2026 Original Required Delivery Date:11/20/2026
SPE7M4-26-T-231V NSN/Part Number: 4710-01-577-2429 Quantity: 34 EA Purchase Request: 7017384668QTY: 34 Delivery: 126 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 331420
New
Federal
PIPE,METALLICThis contract, issued under solicitation number N0010426QFF36 by the Naval Supply Systems Command Weapon Systems Support in Mechanicsburg, Pennsylvania, mandates the supply of metallic pipe meeting stringent military specifications for critical shipboard applications. The material, designated as SPECIAL EMPHASIS Level I, must comply with MIL-P-24691/3 for corrosion-resistant stainless steel seamless pipe of 1-inch nominal size and Schedule 80, with strict requirements for ultrasonic and shear wave testing, chemical and mechanical certification per DI-MISC-81020, and full traceability from heat lot to final product. All items must be seamless, free from mercury contamination, and marked permanently and temporarily per MIL-STD-792 and SAE AMS standards, with traceability numbers directly linked to certified test data. Material must originate from single heats if fewer than five pieces are supplied, and any deviation from specifications requires formal approval via the ECDS system. The contract enforces rigorous quality assurance protocols, including mandatory ISO-9001 and ISO-17025-compliant quality systems, with documented procedures subject to government audit. All certification documentation, including test reports and certificates of compliance, must be submitted via WAWF to Portsmouth Naval Shipyard prior to shipment, with delivery scheduled for 365 days post-certification acceptance. Government inspection occurs at destination, and acceptance is contingent upon 100% verification of traceability markings, certification completeness, and zero-defect sampling per ANSI/ASQ Z1.4 for lot acceptance. The award process is CLIN-specific, allowing for multiple vendors, and prohibits quantity discounts across combined CLINs. The contract includes full Buy American, Small Business Set-Aside, and Warranty provisions, with a 365-day warranty period following acceptance. Contractors must submit engineering change proposals for any configuration changes and adhere to strict documentation, data submission, and security protocols as directed by NAVSEA and Navy directives, with all submissions routed through ECDS and WAWF systems.
Navsup Weapon Systems Support Mech

POSTED

about 20 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 331420
New
DIBBS
Copper Alloy Metal Bar ManufacturingThe contract entails the manufacture of cold-drawn, stress-relieved copper alloy bars conforming to military and ASTM standards for delivery to DLA Cherry Point, located at 28533-5040. The work is classified as a subcontract under NAICS code 331420, which pertains to metal forgings and stampings, indicating specialized production of high-integrity metallic components. All materials must meet exacting technical specifications to ensure performance in defense applications, with compliance to both federal military requirements and recognized ASTM practices being mandatory for qualification and acceptance. The contract was posted on July 16, 2026, with proposals due by July 24, 2026, and the prime entity managing the procurement is the Department of Defense through its Cherry Point facility. Performance is required at the designated location in Cherry Point, North Carolina, with no additional administrative set-aside or organizational restrictions specified, leaving the opportunity open to qualified subcontractors capable of fulfilling the technical and delivery obligations.
CHERRY POINT PHANTOM RD BLDG

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 331420
New
DIBBS
BAR, METALThis contract specifies the procurement of a copper alloy 630 metal bar, annealed, with a diameter of 9.500 inches and a length of 1.000 foot, though the ordered quantity is 4.000 feet in total, to be delivered in whole-foot increments only. The material must conform to technical standards including ASTM B150/B150M, ASTM B249/B249M-23, ASTM B900-16 (R2022), MIL-STD-129R, and SAE AMS-STD-185A, with all specifications referenced in the Technical Data Package Rev B Gen 2. A Certificate of Quality Compliance, or mill material certification, is mandatory for every shipment and must be provided to both the customer and the DLA Troop Support Contracting Officer. Each unit must be clearly marked with the DLA contract delivery order number, NSN, specification number and revision, alloy and temper, manufacturer’s name, heat and lot number, dimensions, and other required identifiers using stamping or stenciling that is legible, waterproof, and non-contaminating. Adhesive labels are required for bars under 0.250 inches nominal OD, and tags are acceptable for wire. All packaging must follow MIL-STD-2073-1E and DLA packaging requirements, with preservation and marking conforming to ASTM B900 and MIL-STD-129, and palletization must also meet RP001 standards. Suppliers must be listed on the Qualified Suppliers List for Distributors (QSLD) as defined by DLA Troop Support, June 1994, and only approved QSLD distributors are eligible for award; any deviation must be explicitly declared, and non-compliance may result in criminal penalties. Source inspection requirements are waived for awards based on QSLD compliance, and CDRL-METALSCERT-26124 applies for material certification documentation. The contract is a firm fixed price with a 10% variance allowance on quantity and requires delivery within 95 days after placement. Inspection and acceptance occur at destination, with FOB origin. The item is part of a total small business set-aside, and the delivery destination is the DLA Distribution facility in New Cumberland, Pennsylvania. Continuous identification and compliance with all marking and certification requirements are enforceable conditions, and failure to meet any
DDSP NEW CUMBERLAND FACILITY

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 331420
New
DIBBS
BAR, METALCopper alloy 630 bar, rolled round and annealed, with a diameter of 3.250 inches and lengths between 10 and 12 feet in whole-foot increments, is subject to strict technical and quality standards under this procurement. The material must conform to SAE AMS4640J, ASTM B249/B249M-23, and ASTM B900-16 specifications, with a reference density of 23.723 pounds per foot. A Certificate of Quality Compliance, including mill-material certification, must accompany every shipment and be forwarded to the DLA Troop Support Contracting Officer. All units must be permanently marked with the DLA contract delivery order number, NSN, specification revision, alloy grade, manufacturer name, heat and lot number, and dimensions using legible stamping or stenciling that does not contaminate the product; adhesive labels are required for bars under 0.250 inches nominal OD. Packaging must adhere to MIL-STD-2073-1E and RP001, with preservation following ASTM B900 and marking in compliance with MIL-STD-129R, including special identifiers for dual-unit shipments. Only suppliers listed on the Qualified Suppliers List for Distributors (QSLD) are eligible for award, and any deviation from this requirement must be explicitly declared; non-compliant products are considered unauthorized substitutions with potential criminal penalties. Source inspection requirements are waived for QSLD-compliant suppliers. The material is designated as a critical application item, and delivery is required within 125 days after award to the DLA Distribution facility in New Cumberland, Pennsylvania, under firm fixed price terms with a 10% quantity variance allowance.
DDSP NEW CUMBERLAND FACILITY

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 331420
New
DIBBS
TUBE ASSEMBLY, METALThe contract pertains to the procurement of one metal tube assembly with NSN 4710-01-619-9285 and part number 3847AS259-1, issued under solicitation SPE7M4-26-T-265K by the Defense Logistics Agency. The item must be delivered within 20 days to the designated military logistics facility in Jacksonville, North Carolina, with shipment FOB origin and no tolerance for quantity variance. Inspection and acceptance occur at the destination point, and packaging must strictly comply with MIL-STD-2073-1E and MIL-STD-129 standards, using the specified packaging methods, materials, and codes, including the U pack code and D3 unit container. Special markings are prohibited, and palletization must adhere to DLA packaging requirements. The item is designated for immediate transport by the fastest traceable means, explicitly excluding parcel post, and is associated with project BK1 TP 2 and RDD 777. All technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation issue date or amendment date if applicable. The contract requires removal of any government identification from non-accepted supplies and mandates that the supplier provide delivery confirmation and compliance documentation to the designated point of contact, Rory O’Reilly, at the Fluid Handling Division of the Department of Defense. The purchase request number is 7017509489, and the unit price is set at $1.00 for the single delivery unit. Shipment must be directed to MCAS New River, Building AS4085, with a required delivery date of July 14, 2026. The supply chain data and unit of issue conversions must align with DLA’s official guidelines, and all logistics are subject to DLA procedural notes C19 and C20 for vessel and first-destination transportation. Government-use fields indicate internal tracking codes for inventory and distribution control, and the solicitation is closed to the public with no set-aside designation applied.
FLUID HANDLING DIVISION

POSTED

1 day ago

DEADLINE

in 9 days
View Details
NAICS: 331420
New
DIBBS
BAR, METALThis contract specifies the procurement of cold drawn, stress relieved copper alloy 642 bar stock with a diameter of 1.750 inches and lengths between 8 and 12 feet in whole foot increments, at a reference weight of 7.937 pounds per foot. The material must conform to ASTM B150/B150M Revision D dated April 1, 2019, and other referenced standards including ASTM B249/B249M-23 and ASTM B900-16, with full compliance required for metallurgical properties, dimensions, and finish. A Certificate of Quality Compliance must accompany every shipment and be forwarded to the DLA Troop Support Contracting Officer, and each unit must be identifiably marked with the contract number, NSN, specification revision, alloy, manufacturer details, heat and lot numbers, and dimensions using approved methods such as stenciling or stamping—adhesive labels are required for smaller diameter bars. Markings must be durable, waterproof, and non-contaminating, with no mercury or mercury-containing compounds permitted except in specific functional components as outlined. Only suppliers listed on the Qualified Suppliers List for Distributors (QSLD) are eligible to quote or be awarded this contract, and any deviation from this requirement must be explicitly declared, with non-compliance constituting an unauthorized substitution that may result in criminal penalties. The government waives source inspection requirements for QSLD-compliant suppliers, relieving them of certain quality conformance inspections. Packaging must adhere to MIL-STD-2073-1E and DLA packaging requirements, with preservation methods in line with ASTM B900 and marking per MIL-STD-129R, including dual-unit labeling when applicable. The delivery point is Cherry Point, NC, with a firm fixed price structure, a 10% quantity variance allowance, and a 65-day delivery timeline from award. The item is designated as critical, and its technical data package references multiple revision-controlled standards, with all documentation subject to DLA’s master list of technical and quality requirements.
CHERRY POINT PHANTOM RD BLDG

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 331420
New
DIBBS
TUBE ASSEMBLY, METALThis contract is for the procurement of a metal tube assembly identified by NSN 4710-01-605-2172 and part number 65317-03127-070, with a quantity of five units required under solicitation SPE7M4-26-T-265G. Delivery is scheduled for 168 days after award, with FOB origin terms and inspection and acceptance occurring at the destination facility in Cherry Point, North Carolina. Packaging must comply with ASTM D3951 and MIL-STD-129, subject to stricter DLA packaging requirements, and all items must be palletized in accordance with DLA’s procurement standards. The contract mandates full compliance with the DLA Master List of Technical and Quality Requirements, including tailored higher-level quality controls, supply chain traceability documentation as per DLA Directive Procurement Note C03, and removal of government identification from non-accepted supplies. Cybersecurity requirements mandate a CMMC Level 2 self-assessment, and the contractor must retain traceability records throughout the supply chain. Sampling for quality acceptance follows Sikorsky Corporation’s alternate plan QAP 1201, which must meet or exceed ASQ H1331 or MIL-STD-1916 standards. No unit identification marking is required per customer request, though all items must be marked and labeled correctly. The contract is classified as a critical application item, and sourcing must first use approved commercial sources before engaging organic manufacturing channels if needed. The delivery deadline is December 12, 2026, with a need ship date of January 12, 2027, and the单价 is $5.00 per unit, totaling $25.00.
FLUID HANDLING DIVISION

POSTED

1 day ago

DEADLINE

in 9 days
View Details
NAICS: 331420
New
DIBBS
BAR, METALThis contract specifies the procurement of copper alloy 715 metal bars in round, hard temper form, with a diameter of 3.000 inches and lengths between 6 and 8 feet, weighing approximately 27.396 pounds per foot. The material must comply with technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, and all suppliers must be listed on the Qualified Suppliers List for Distributors (QSLD) to be eligible for award. Non-compliance with the QSLD requirement constitutes a deviation and may result in rejection of the bid. The product must be accompanied by a Certificate of Quality Compliance with every shipment, and continuous identification markings are mandatory on each unit, including the DLA contract delivery order number, NSN, specification number, alloy, grade, temper, manufacturer’s name, heat and lot number, and dimensions. Markings must be legible, waterproof, and applied via stenciling or stamping without contaminating the material. Adhesive labels are required for small-diameter bars, and tags are acceptable for wire. All packaging must adhere to MIL-STD-2073-1E and DLA packaging requirements, with preservation and marking in accordance with MIL-C-3993 and MIL-STD-129R. The contract requires full compliance with the QSL program, and unauthorized substitutions may trigger criminal penalties. The delivery must occur within 95 days after award, with inspection and acceptance performed at destination, and pricing is firm fixed. Quantities may vary plus or minus 10 percent, and the material must be supplied in whole-foot lengths only. The item is designated as controlled defense information, and the technical data package references multiple military specifications including MIL-C-15726F, MIL-C-3993C, and MIL-STD-129R.
DDSP NEW CUMBERLAND FACILITY

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 331420
New
Federal
W911S226U3702 COPPER ALUMINUM BAR The U.S. Government is seeking a total requirement of 24 feet in random length copper aluminum round bars under solicitation W911S226U3702, with Amendment 0001 specifically modifying the acceptance criteria to allow for this length specification. This contract is a combined synopsis and solicitation issued under a Total Small Business Set-Aside, meaning only businesses certified as small by the Small Business Administration are eligible to respond, as defined by FAR 19.5. The North American Industry Classification System code is 331420, identifying the procurement within the primary smelting and refining of nonferrous metal industry. The contracting office is the Office of W6QM Micc-Ft Drum within the Department of Defense, located at Fort Drum, New York, and the place of performance is listed as ZIP code 61299. The solicitation was posted on July 16, 2026, with responses due by July 23, 2026, at 4:00 PM Eastern Time. Primary point of contact is Cindy Jepsen, reachable by phone at 309-782-8389 or email at cindy.k.jepsen.civ@army.mil.
W6QM Micc-Ft Drum

POSTED

2 days ago

DEADLINE

in 5 days
View Details
NAICS: 331420
New
Federal
COPPER AND ALUMINUMThe U.S. Navy’s Naval Surface Warfare Center Crane is seeking copper and aluminum through a total small business set-aside solicitation under FAR 19.104-1, limiting eligibility to small businesses as defined by the SBA. The contract will be awarded under FAR 12.201-1 procedures with delivery required FOB Destination, and all offerors must be actively registered in the System for Award Management (SAM) with current annual confirmation. The solicitation number is N0016426Q0229, with a NAICS code of 331420, and responses must be submitted to amy Haworth and Andrew Ficklin via email no later than 12:00 AM Eastern Time on July 24, 2026. All updates, amendments, or modifications to the solicitation will be posted exclusively on Contract Opportunities at sam.gov, and it is the vendor’s responsibility to monitor the site regularly. Only offerors who submit quotes by the deadline will be notified of any post-deadline changes and considered for potential award. The point of contact is Rebecca Helton, reachable at the provided phone and email, with the performance location in Crane, Indiana.
Nswc Crane

POSTED

2 days ago

DEADLINE

in 6 days
View Details
NAICS: 331420
New
DIBBS
Domestic Raw Material Supply (Copper/Conductor Materials)The contract requires the supply of U.S.-sourced copper and insulation materials specifically for the production of military specification wire, with strict compliance to the Buy American Act and the Berry Amendment to ensure all materials originate entirely within the United States. The materials must meet exacting quality and sourcing standards to support defense-related wiring applications, and the subcontractor is expected to provide documented proof of domestic origin throughout the supply chain. Performance of the contract is designated for Tracy, California, with a delivery deadline for proposals set for July 27, 2026, and the solicitation was posted on July 15, 2026. The North American Industry Classification System code 331420 identifies the scope as copper and copper alloy manufacturing, aligning the contract with primary producers of refined copper and conductor materials used in defense electronics and electrical systems. This subcontract falls under the Department of Defense’s Maritime Supply Chain initiative, indicating the materials are intended to support naval or maritime defense platforms.
MARITIME SUPPLY CHAIN

POSTED

3 days ago

DEADLINE

in 9 days
View Details
NAICS: 331420
New
DIBBS
Precision Metal Stamping and Tube FabricationThe contract requires the manufacture of a precision metal tube assembly involving stamping, forming, and assembly processes to meet stringent military specifications. The work must be performed in San Diego, California, with a deadline for responses set for July 22, 2026, and the solicitation was posted on July 14, 2026. The North American Industry Classification System code is 331420, identifying it as a subcontract opportunity within the primary metal manufacturing sector. This effort is being managed by the ASC SUPPLIER OPER OEM DIVISION under the Department of Defense, indicating its alignment with defense supply chain requirements and the need for full compliance with military standards for quality, durability, and performance.
ASC SUPPLIER OPER OEM DIVISION

POSTED

4 days ago

DEADLINE

in 4 days
View Details

More opportunities from Department Of Defense → FLUID HANDLING DIVISION

Same awarding agency

NAICS: 335312
New
DIBBS
MOTOR, ALTERNATING CURRThe contract solicits nine alternating current motors with NSN 6105-01-211-6510 under solicitation number SPE7M4-26-T-215P, with a response deadline of July 22, 2026, and a delivery requirement of 77 days after award. This is a restricted source item requiring formal engineering source approval from the government design control activity. The product must comply with all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, with the applicable revision based on the solicitation issue date or amendment date for large acquisitions. The offeror must submit complete manufacturing documentation per MIL-T-31000, including all drawings, detailed process and operation sheets identifying critical steps and inspection criteria, sourcing information for forgings and castings, and if available, copies of purchase orders. A shock extension report meeting MIL-S-901 and DI-ENVR-80706 standards is mandatory. If original OEM drawings are unavailable, the offeror must provide a detailed engineering analysis explaining how their drawings were developed, including full details of any reverse engineering methodology used, such as sample sizes, measurement techniques, data collected, and justifications for dimensional deviations. All submitted data must be routed to the engineering support activity for review and approval.
Motor and Generator Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 4 days
View Details
NAICS: 326122
New
DIBBS
PLATE, ORIFICE, FLUIDThe contract is for the procurement of one fluid orifice plate, identified by NSN 4730-01-686-7144, under solicitation SPE7M3-26-T-7152, with a proposed delivery date 20 days after award and a deadline for response on July 22, 2026. The item is to be delivered to the Naval Sea Systems Command warehouse in Mechanicsburg, Pennsylvania, under FOB Origin terms. The procurement is governed by the DLA Master List of Technical and Quality Requirements, which supersedes general commercial packaging standards like ASTM D3951, and requires full compliance with MIL-STD-129 for marking, labeling, and barcoding of shipments, including proper identification of hazardous materials under OSHA’s Hazard Communication Standard. Export control is a critical component, as the technical data associated with this item is subject to ITAR or EAR, requiring prior authorization for any disclosure to foreign persons, and only contractors certified under the US/Canada Joint Certification Program, who have completed mandatory DLA training and approval processes, may access the controlled information, in accordance with DFARS 252.225-7048. The contract includes a suite of FAR and DFARS clauses addressing small business representation, employment eligibility, combating trafficking, sustainable products, cybersecurity safeguards, and transportation regulations, many of which are applied with deviations under DEVIATION 2026-00038 or similar, and requires electronic invoicing exclusively through WAWF. Pricing data is not provided, and the contract type is unspecified, though the solicitation is categorized as a simplified acquisition. The contractor must also comply with special labeling requirements for any hazardous materials, submit pre-award label and MSDS documentation if applicable, and ensure ongoing updates to hazardous material disclosures throughout performance. All proposals must be submitted electronically via DIBBS by the stated deadline, and offerors must represent their size status and socioeconomic certifications, including any joint venture arrangements, while also disclosing if they provide covered defense telecommunications equipment or services under 252.204-7016 and 7017. Inspection and acceptance will occur at the destination by the government, with no provision for contractor inspection. The contract includes no evaluation factors, weights, or basis of award information, and no attachments are identified.
Plastics Pipe and Pipe Fitting Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332911
New
DIBBS
DISK, VALVEThe contract pertains to the procurement of three DISK, VALVE units identified by NSN 4820-01-304-4960 under solicitation number SPE7M4-26-T-234L. This federal procurement is managed by the Defense Logistics Agency under the Department of Defense and was posted on July 6, 2026, with a response deadline of July 17, 2026. The solicitation is open to all eligible contractors without any specific set-aside classification. The place of performance and office address information are not specified, but the procurement is conducted under U.S. federal jurisdiction. Interested parties must submit responses through the designated DIBBS platform via the provided UI link before the deadline to be considered for award.
Industrial Valve Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 4 days
View Details
NAICS: 326122
New
DIBBS
MANIFOLD, HYDRAULICThe contract pertains to the procurement of a hydraulic manifold system accessory identified by NSN 4730-01-707-1733 and part number 201330780-10, with a quantity of 43 units required for delivery within 136 days after order. Technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation or award date depending on acquisition size. The item is subject to stringent packaging standards per DLA requirements and includes tailored higher-level quality controls for both manufacturers and non-manufacturers. Inspection and acceptance must occur at the manufacturer’s origin, and any non-accepted supplies must have government identification removed prior to return. Export control restrictions apply due to the presence of technical data governed by ITAR or EAR, prohibiting unauthorized disclosure to foreign persons or entities, including foreign nationals within the U.S., and requiring compliance with DFARS 252.225-7048. Access to this controlled data is limited to DLA contractors certified under the US/Canada Joint Certification Program, who have completed mandatory DOD export control training and been formally approved by DLA. Cybersecurity requirements mandate CMMC Level 2 certification by a certified third-party assessment organization. The solicitation number is SPE7M3-26-T-7278, issued by the Department of Defense’s Fluid Handling Division, with responses due by July 22, 2026, and performance required at New Cumberland, Pennsylvania.
Plastics Pipe and Pipe Fitting Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 4 days
View Details
NAICS: 331210
New
DIBBS
TUBE, METALLICThe contract specifies the procurement of seamless metallic tubes made from aluminum alloy 6061 in temper T6, with dimensions of 1-1/2 inches square by 1/4 inch wall thickness and a standard length of 21 feet per unit, conforming to the ASTM B221-21 standard for extruded aluminum products. The tubes must meet strict quality and packaging requirements outlined in DLA’s Master List of Technical and Quality Requirements, including compliance with MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, with no special marking required. The use of ozone-depleting chemicals is strictly prohibited, and any alternative substances must be pre-approved unless explicitly permitted by the specification. Each unit is designated as a linear foot equivalent (LG), with a total quantity of 91.905 LG, rounded to 92 units, and no variance in quantity is permitted. Delivery is required FOB origin, with inspection and acceptance occurring at the destination, and the delivery deadline is set for 221 days from contract award, with a required ship date of February 24, 2027. Packaging must also adhere to ASTM B660 and DLA’s packaging requirements, with palletization and container specifications detailed per DLA guidelines. The item is identified by NSN 4710-01-182-2428, and the delivery address is DLA Distribution Red River in Texarkana, Texas. Full and open competition applies, with contract administration handled by the Department of Defense’s Fluid Handling Division under solicitation SPE7M4-26-T-234E, and primary point of contact is Rory O’Reilly.
Iron and Steel Pipe and Tube Manufacturing from Purchased Steel

POSTED

about 15 hours ago

DEADLINE

in 4 days
View Details
NAICS: 333998
New
DIBBS
STRAINER, SUCTIONThe contract is for the procurement of 51 units of a suction strainer identified by NSN 4730-12-374-6394 under purchase request 1000235512, with a delivery requirement within 84 days after award. The solicitation number is SPE7M4-26-U-0379, issued on July 17, 2026, with responses due by July 22, 2026, and it is designated as a Total Small Business Set-Aside under FAR 19.5, targeting small business concerns. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions tied to the solicitation or award date depending on acquisition size. The item falls under NAICS code 333998 and is managed by the Fluid Handling Division of the Department of Defense. All supply shipments must comply with DLA packaging standards and include provisions for removal of government identification from non-accepted items. The point of contact for inquiries is Colin Brown, reachable via email and phone, and the solicitation is accessible through the DIBBS portal.
All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332996
New
DIBBS
STRAINER ELEMENT, SEDIMThe contract mandates the supply of a sediment strainer element made exclusively from Monel material, with strict adherence to technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, where compliance is governed by the revision in effect on the solicitation or award date depending on acquisition size. The item is designated as a critical application and must not contain any Class I ozone-depleting chemicals, nor intentionally incorporate mercury or mercury-containing compounds except under specific, narrowly defined exceptions for functional uses in batteries, lights, instruments, weapon systems, or NAVSEA-specified reagents. Portable devices with mercury must include shockproof construction and a secondary containment barrier per NAVSEA 5100-003D. Approved suppliers include Haywardindl. Products Inc. and Eaton Filtration LLC, both with part number ST052160P250MM, and the contract is issued under solicitation SPE7M3-26-T-7277 with a women-owned small business set-aside. Six units are required with zero variance allowed in quantity, to be delivered FOB origin within 157 days of the contract award, with inspection and acceptance occurring at the destination. Packaging must conform to MIL-STD-2073-1E and MIL-STD-129, with special marking codes indicating “Arrow Up,” “Open for Inspection or Use Only,” “Open This Side,” and “Team Lift Required.” The DLA requires reduced plastic packaging without compromising protection, and palletization must follow DLA packaging guidelines. The shipment must be addressed to DLA Distribution San Diego at 3581 Cummings Road, Building 3581, San Diego, CA 92136-3581, with the required delivery date set for December 22, 2026. The NSN is 4730-01-289-5533, and the unit of issue is each (EA). A Certificate of Conformance is authorized unless overridden by a Quality Assurance Letter of Instruction. The prime point of contact is William Cain, with additional transportation and shipping requirements governed by DLA procedural notes C19 and C20.
Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 4 days
View Details
NAICS: 541330
New
DIBBS
Quality Assurance and Compliance Documentation ServicesThe contract requires the preparation and submission of comprehensive technical documentation to ensure full compliance with military standards, specifically focusing on traceability records, inspection reports, and certification of adherence to required specifications. This work is essential to verify the integrity and conformity of components and systems within the defense supply chain, supporting rigorous quality assurance protocols. All deliverables must be meticulously compiled, accurately documented, and submitted in a timely manner to meet the regulatory expectations of the Department of Defense. This is a subcontract under the NAICS code 541330 for Quality Assurance and Compliance Documentation Services, issued by the FLUID HANDLING DIVISION of the Department of Defense. The solicitation was posted on July 16, 2026, with a response deadline of July 27, 2026. Although no specific location is designated for performance, the work is directly tied to defense-related operations and must align with stringent federal defense requirements. Interested parties must respond by the stated deadline to be considered for award, and the contract will be managed through the DLA DIBBS portal using the reference number SPE7M326Q0170.
Engineering Services

POSTED

1 day ago

DEADLINE

in 9 days
View Details
NAICS: 484220
New
DIBBS
Logistics and Transportation to DLA Distribution CenterThe contract entails the secure and compliant transportation of packaged military items to the DLA Distribution Center in New Cumberland, Pennsylvania, adhering strictly to Defense Priority Allocation System (DPAS) requirements and DLA procurement directives C19 and C20. All shipments must meet rigorous defense logistics standards, ensuring timely, tamper-proof delivery while maintaining full regulatory compliance throughout the supply chain. The contractor is responsible for end-to-end logistics execution with attention to security protocols, documentation accuracy, and adherence to military-specific handling procedures. This is a subcontract under the NAICS code 484220 for truck transportation of freight, solicited by the Fluid Handling Division of the Department of Defense. The opportunity was posted on July 16, 2026, with responses due by July 27, 2026. Performance will occur at the specified DLA Distribution Center location, and all activities must align with federal defense procurement standards. The contract requires proven experience in defense logistics, ability to navigate DPAS prioritization, and capacity to meet stringent delivery timelines without compromise to safety or compliance.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

1 day ago

DEADLINE

in 9 days
View Details
NAICS: 811310
New
DIBBS
Reconditioning and Reutilization Services for Government SurplusThe contract encompasses the inspection, reconditioning, rebuild, and certification of surplus fluid handling components to meet original military specifications, ensuring they are fit for reuse or resale. All work must adhere strictly to the technical and quality standards established for government-issued equipment, with a focus on restoring functionality, reliability, and safety without compromise. The services required include thorough assessment of component integrity, replacement of worn or degraded parts, systematic reassembly, and formal certification verifying compliance with all applicable military requirements. The contract is classified as a subcontract under NAICS code 811310 and is issued by the Fluid Handling Division within the Department of Defense. It was posted on July 16, 2026, with a response deadline of July 27, 2026. While no specific location is designated for performance, all work must be executed in a manner that supports the readiness and logistical needs of the military supply chain. The solicitation is accessible through the DIBBS portal, and potential bidders are expected to demonstrate proven capability in handling military-grade fluid systems with a documented history of successful reconditioning and certification.
Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

1 day ago

DEADLINE

in 9 days
View Details
NAICS: 332994
New
DIBBS
Specialized Hose Clamp Supply (NSN 4730-01-661-4086)The contract specifies the supply of 49 military-specification hose clamps identified by NSN 4730-01-661-4086, requiring full traceability from manufacturing through delivery, with packaging and documentation fully aligned with Defense Logistics Agency standards. All units must meet rigorous defense-grade specifications to ensure operational reliability and compliance with DoD requirements. The solicitation is issued as a subcontract under NAICS code 332994 by the Fluid Handling Division of the Department of Defense, with responses due by July 27, 2026, and the opportunity posted on July 16, 2026. The place of performance and point of contact details are not specified, but the work is expected to support military fluid handling systems, with all deliverables subject to DLA inspection and verification protocols.
Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

1 day ago

DEADLINE

in 9 days
View Details
NAICS: 541320
New
DIBBS
Quality Inspection and Acceptance SupportThe contract involves providing quality inspection and acceptance support for critical, major, and minor product attributes using zero-based sampling plans aligned with MIL-STD-1916 or ASQ H1331 standards to ensure compliance with AQL requirements. Inspections must be conducted both during production and at final stages to guarantee conformance and operational reliability. The work is designated as a subcontract under NAICS code 541320 and is managed by the Fluid Handling Division of the Department of Defense, with performance required at a facility in San Diego, zip code 92136-3581. The solicitation was posted on July 16, 2026, and responses are due by July 27, 2026, with all submissions to be made through the DIBBS platform using the provided RFQ link.
Landscape Architectural Services

POSTED

1 day ago

DEADLINE

in 9 days
View Details