Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

TUBE, FEEDER, LINEAR

Active
SPE4A7-26-T-591ZFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for two units of a linear actuator feed tube with NSN 1650-01-011-8749, issued under solicitation SPE4A7-26-T-591Z by the Defense Logistics Agency through the Department of Defense’s ASC Supplier Oper AE and AF Division. Delivery is required within 425 days of award, with responses due by July 30, 2026. The item falls under NAICS code 336413 and is subject to stringent technical, quality, and export control requirements. It incorporates all referenced technical and quality standards from the DLA Master List, including tailored higher-level quality requirements for both manufacturers and non-manufacturers, configuration change management protocols, and specific inspection and acceptance procedures at origin. The product contains technical data subject to ITAR or EAR export controls, meaning unauthorized disclosure—even to foreign nationals within the U.S.—is prohibited. Only contractors with approved U.S./Canada Joint Certification Program status, completed DOD export control training, and formal DLA authorization may access this controlled data. Packaging must comply with DLA standards, and non-accepted supplies must have all government identification removed. Physical identification marking requirements apply to the bare item, and the contractor is responsible for adherence to all export compliance obligations as defined by DFARS 252.225-7048.

General Info

Two linear actuator feed tubes, DLA contract, 425-day delivery, ITAR/EAR controlled, certified contractors only.

Agency

Department Of Defense → ASC SUPPLIER OPER AE AND AF DIVView Agency

NAICS

336413 - Other Aircraft Parts and Auxiliary Equipment ManufacturingView NAICS

Place of Performance

US

Set-Aside

NONE

Documents

(1)

SPE4A7-26-T-591Z.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC SUPPLIER OPER AE AND AF DIV
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV
View Agency Profile
Office AddressUS
Contacts
April Reed
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
TUBE,FEEDER,LINEAR
TUBE,FEEDER,LINEAR ACTUATOR
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD002, COVERED DEFENSE INFORMATION APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 1650-01-011-8749 Quantity: 2 EA Purchase Request: 7017596591QTY: 2 Delivery: 425 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 336413
New
DIBBS
Manufacture of Navigational Lights (Prime-Level Assembly & Testing)The contract requires the full manufacturing, assembly, quality control, and testing of 70 units of the GLAMOX AQUA SIGNAL CORPORATION model 34000-7 navigational lights, all to be produced in strict accordance with military specifications. This includes adherence to MIL-STD standards for packaging and labeling to ensure compliance with Department of Defense requirements. The work is classified as a subcontract with the NAICS code 336413, indicating specialized manufacturing of marine and aerospace lighting systems. The place of performance is designated as New Cumberland, Pennsylvania, with a zip code of 17070-5002, and the contracting activity is managed under the DDSP NEW CUMBERLAND FACILITY, a unit of the Department of Defense. All deliverables must be completed and submitted by the response deadline of August 3, 2026, following a solicitation posted on July 22, 2026. There is no set-aside designation specified, and the contract does not indicate a prime contractor or point of contact detail.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 20 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336413
New
DIBBS
Hydraulic Jack Parts Kit Manufacturing and AssemblyThe contract mandates the manufacture, assembly, and delivery of 33 hydraulic jack parts kits designated by NSN 1730-01-206-1789 and P/N 740A0014, all produced to meet military specifications. This includes full responsibility for sourcing components, implementing rigorous quality control measures, proper packaging, accurate labeling, and timely shipment to the designated location. The work must comply with all applicable defense standards and requirements to ensure functionality and reliability under operational conditions. The place of performance is specified as Jacksonville, with a zip code of 32212-0103, and all deliverables must be finalized and shipped to this location. This is a subcontract opportunity reserved exclusively for Women-Owned Small Businesses under a WOSB set-aside, with the NAICS code 336413 indicating the industry classification for Aircraft and Parts Manufacturing. The solicitation was posted on July 22, 2026, and responses are due by August 3, 2026. The contracting activity falls under the Department of Defense, specifically through the agency named CONSTRUCTION & EQUIPMENT MANU & CON, and details for submission can be accessed via the provided DIBBS portal link. Only qualified WOSB entities are eligible to bid, and compliance with federal small business set-aside regulations is mandatory for consideration.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 20 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336413
New
DIBBS
Source-Controlled Manufacturing & Assembly of Filter Standby CartThe contract involves the full manufacturing, assembly, and testing of the FILTER STANDBY CART in strict adherence to military specifications, requiring end-to-end responsibility for sourcing all necessary components, performing final assembly, and conducting comprehensive quality conformance inspections as defined by MIL-STD-1916. The work must meet the rigorous standards expected for defense-related equipment, ensuring reliability and performance under operational conditions. All processes must be executed with full compliance to quality control protocols and documented to demonstrate conformity throughout production. This is a subcontract classified as a Total Small Business Set-Aside under SBA guidelines, meaning only small businesses are eligible to respond. The North American Industry Classification System code is 336413, indicating the work falls under the category of other transportation equipment manufacturing. Performance is scheduled to take place at Robins AFB, Georgia, with a response deadline of July 30, 2026, and the solicitation was posted on July 22, 2026. The contracting entity is the ASC SUPPLIER OPER AE AND AF DIV under the Department of Defense, and the procurement is managed through the DIBBS RFQ platform under solicitation number SPE4A726T590H.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 20 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
Pump Assembly, Cylinder Supply (NSN 1730-00-140-2526)The contract outlines the procurement and delivery of one unit of a pump assembly, cylinder with National Stock Number 1730-00-140-2526, required to meet all applicable military packaging, labeling, and hazardous materials standards to ensure safe handling and transportation. This is a subcontract under the NAICS code 336413, which corresponds to aerospace product and parts manufacturing, and is managed by the Department of Defense under the organizational designation Construction & Equipment Manu & Con. The solicitation was posted on July 22, 2026, with a response deadline of August 3, 2026, indicating a tight timeline for potential vendors to submit proposals. The place of performance is specified as New Cumberland, Pennsylvania, with a ZIP code of 17070-5002, suggesting the component is intended for use or integration at a Defense Logistics Agency facility or associated military installation. Although no point of contact or set-aside details are provided, the requirement for compliance with stringent military logistics standards implies that only qualified suppliers with appropriate certifications and experience in defense-grade equipment are eligible to respond. The contract is accessible via a DIBBS portal link for further submission details and documentation.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 20 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336413
New
DIBBS
PARTS KIT, JACKThis contract pertains to the procurement of a Parts Kit, Jack, identified by NSN 1730-00-673-4718 and part number TES3-3, with a total quantity of 16 units, each to be delivered at a unit price of $16.00, resulting in a total contract value of $256.00. The delivery is to be made FOB origin within 167 days from the solicitation, with no variance allowed in quantity, and inspection and acceptance occur at the destination. All packaging must comply strictly with ASTM D3951 and MIL-STD-129 for marking and labeling, and palletization must adhere to DLA’s Packaging Requirements for Procurement, which supersede all other standards. The DLA Master List of Technical and Quality Requirements takes precedence over all other specifications, and covered defense information protocols apply. The item is subject to a total small business set-aside under NAICS code 336413, and the delivery destination is DLA Distribution Jacksonville at Bldg 175, Swan Road, Jacksonville, FL 32212-0103, with Russell Keiser listed as the primary point of contact. The original required delivery date is December 5, 2026, with a revised ship date of January 18, 2027.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 20 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336413
New
DIBBS
PUMP ASSEMBLY, CYLINThe contract is for the procurement of one unit of a pump assembly, cylinder, identified by NSN 1730-00-140-2526 under purchase request 7017585531, with a delivery requirement of 167 days after award. The solicitation number is SPE8EF-26-T-1501, posted on July 22, 2026, with responses due by August 3, 2026. It falls under NAICS code 336413 and is categorized as a federal procurement by the Department of Defense under the Construction & Equipment Manu & Con organization. Performance is required at New Cumberland, Pennsylvania, 17070-5002. The contract incorporates technical and quality requirements from the DLA Master List of Technical and Quality Requirements, with compliance based on the version in effect at the time of solicitation or award depending on acquisition type. Cybersecurity Maturity Model Certification Level 2 self-assessment is mandated, and the handling of covered defense information is required. Packaging must meet DLA standards, and government identification must be removed from any non-accepted supplies. The primary point of contact is Raymond Horn, reachable via phone and email provided.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 20 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336413
New
DIBBS
LINER, ACTUATORThe contract pertains to the procurement of LINER, ACTUATOR with part number 292340, sourced from Linear Motion LLC, and also includes alternate suppliers Ontic Engineering & Manufacturing Inc and Mistequay Group Ltd with part number CA67818-001. The item is designated as a critical application item and is governed by stringent technical and quality standards outlined in the DLA Master List of Technical and Quality Requirements, which override any other referenced standards. The contract mandates adherence to MIL-STD-1916 or ASQ H1331 for sampling, with zero non-conformances required unless otherwise specified, and applies specific verification levels and AQLs for critical, major, and minor attributes. Configuration changes require formal engineering change proposals or variance requests, and all non-accepted supplies must have government identification removed prior to return. Packaging must comply with ASTM D3951 and MIL-STD-129, with palletization following DLA’s RP001, and all items must be clearly marked as per RQ017. Delivery is FOB origin, with inspection and acceptance occurring at destination after a 170-day delivery window, and the quantity is fixed at 14 units with no variance permitted. The unit price is $14.00, totaling $196.00, and the NSN is 1680-00-492-0817. The required delivery date is September 22, 2027, with a need ship date of January 17, 2027. All shipments must be routed to DLA Distribution Depot Hill at Hill AFB, Utah, following DLAD procedural notes C19 and C20 for transportation and first destination logistics.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 20 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
RESERVOIR, WINDOW WAThis contract pertains to the procurement of one unit of a reservoir, window WA, identified by NSN 1680-01-646-9656 and part number 70209-21000-050, to be delivered to SIKORSKY AUSTRALIA in YERRIYONG, AU, with a delivery window of 20 days from the contract award. The item is subject to stringent quality and supply chain traceability requirements, including compliance with DLA Directive Procurement Notes #C03 for retention of supply chain documentation, and adherence to DLA packaging standards MIL-STD-2073-1E and MIL-STD-129 for marking and packaging. Sampling must follow MIL-STD-1916 or ASQ H1331, with zero non-conformances required unless otherwise stipulated, and attributes must be verified at specified levels or AQLs. The contractor must meet CMMC Level 2 cybersecurity standards and is required to remove government identification from non-accepted supplies. No unit of issue conversion is needed as the DoD unit is already in effect. The item is delivered FOB origin with no variance allowed in quantity. Packaging must be palletized per DLA requirements and use approved preservation methods. All documentation must align with the DLA Master List of Technical and Quality Requirements referenced by R and I numbers. The contract is controlled under solicitation SPE4A5-26-T-305L with a response deadline of July 30, 2026, and the end-use is for the MH-60 Romeo aircraft program under Australian government coordination via DHL Freight Forwarder in Brisbane, Australia.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 20 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
CUSHION, SEAT, AIRCRAFTThis contract pertains to the procurement of 17 aircraft seat cushions, identified by NSN 1680-99-187-0386 and part number 0A254-0637, supplied by IPECO HOLDINGS LIMITED. The item is classified as a critical application component and must comply with stringent technical and quality requirements referenced from the DLA Master List, including specific preservation, packaging, and marking standards aligned with MIL-STD-2073-1E and MIL-STD-129. Supply chain traceability documentation must be retained by the contractor in accordance with DLA Directive Procurement Note C03, and the product must meet FAA airworthiness approval standards. Packaging and labeling must adhere to DLA-specific guidelines, with no special marking required. Delivery is due FOB origin within 21 days of contract award, with inspection and acceptance occurring at the destination, and zero tolerance for quantity variance. The unit price is $17.00 per unit for a total value of $289.00. The item must be delivered to DLA Distribution at the New Cumberland facility in Pennsylvania, and the original required delivery date is September 6, 2026, though an earlier ship date of November 10, 2025, is preferred. Compliance with cybersecurity maturity model certification level 2 self-assessment and covered defense information requirements is mandatory, and all documentation must align with the referenced quality assurance provision and contract data requirements list.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 20 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
INSULATION, PRECOOLEThe contract pertains to the procurement of one unit of insulation for a precooler, identified by NSN 1660-01-244-5424 and part number U539618, supplied by Triumph Thermal Systems, LLC. The item must be delivered within five days of award, FOB origin, to Tinker Air Force Base, Oklahoma, with inspection and acceptance occurring at the destination. Strict compliance with DLA’s Master List of Technical and Quality Requirements governs all specifications, overriding any conflicting standards such as ASTM D3951. Packaging must conform to MIL-STD-129 and RP001 DLA packaging requirements, with all items labeled and marked per physical identification standards, and no government identification removed from non-accepted supplies. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, with critical, major, and minor attributes assigned verification levels VII, IV, and II respectively. The unit of issue is each, with no variance permitted in quantity. Shipping must be via traceable freight, explicitly prohibiting parcel post, and the required delivery date is May 27, 2026. All technical and quality provisions referenced take precedence, and the contract is issued under solicitation SPE4A7-26-T-591N by the Department of Defense, with primary contact Amber Wells at DLA.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 20 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
LIGHT, NAVIGATIONAL,The contract pertains to the procurement of 70 units of a navigational light, identified by NSN 6220-01-628-9651 and part number 34000-7 manufactured by GLAMOX AQUA SIGNAL CORPORATION, under solicitation SPE8E7-26-T-3386. Delivery is required within 167 days from the award date, with terms set at FOB origin and no variance allowed in quantity, meaning exactly 70 units must be delivered. Inspection and acceptance occur at the destination, and packaging must comply fully with MIL-STD-2073-1E and MIL-STD-129 for marking, including precise codes for packaging methods, materials, and containers as specified. The item is subject to DLA’s Packaging Requirements for Procurement and Hazmat packaging standards, with shipments directed to the DLA Distribution facility in New Cumberland, Pennsylvania. The contract incorporates technical and quality requirements referenced from the DLA Master List, and all provisions are governed by the version of the master in effect on the solicitation issue date. The original delivery deadline is December 14, 2026, but the needed ship date is set for January 18, 2027, allowing time for processing and logistics. Payment is based on a unit price of $70, resulting in a total contract value of $4,900. The point of contact for inquiries is Kelly Mitchell of the Department of Defense, with all correspondence and compliance governed under DLA procedures and federal acquisition standards.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 20 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336413
New
DIBBS
PARTS KIT, HYDRAULICThis contract pertains to the procurement of a hydraulic parts kit, specifically a jack, identified by NSN 1730-01-206-1710 and manufacturer part number 120A1540 from Columbus Jack Corporation, with a total quantity of 4 kits. The item is classified as a critical application item and a Type I shelf-life item with a non-extendable 120-month shelf life, requiring a minimum of 85% remaining shelf life upon receipt by the first government activity. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, including clear indications of manufactured and expiration dates and special marking code 32 for Type I shelf life. The delivery is FOB origin with a required delivery date of December 7, 2026, and a need ship date of May 28, 2027, allowing 297 days for delivery. All packaging must adhere to DLA’s procurement requirements and palletization standards. The item is subject to DLA’s master list of technical and quality requirements, and any covered defense information provisions apply. Inspection and acceptance occur at the destination, with no variance allowed in quantity. The delivery address is DLA Distribution San Diego, and transportation details follow DLA procedural notes C19 and C20.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 20 hours ago

DEADLINE

in 11 days
View Details

More opportunities from Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV

Same awarding agency

NAICS: 541611
New
DIBBS
Export Control Compliance Advisory (ITAR/EAR)The contract requires advisory services focused on compliance with the International Traffic in Arms Regulations (ITAR) and the Export Administration Regulations (EAR) for technical data associated with a shim. The scope centers on preventing unauthorized disclosure of controlled information to foreign persons and ensuring all transfers adhere to proper authorization protocols, including export licenses or exemptions. The consultant must possess detailed expertise in U.S. export control frameworks and be able to interpret and apply regulatory requirements to specific technical data, particularly as it pertains to defense-related components. Performance is expected to be conducted in San Diego, California, with the contracting entity being the Department of Defense under the ASC SUPPLIER OPER AE AND AF DIV. This is a subcontract award issued under NAICS code 541611, which classifies management consulting services. The solicitation was posted on July 22, 2026, with responses due by July 30, 2026. While no set-aside type is specified, the work involves strict compliance obligations requiring familiarity with defense export controls and the ability to support internal processes that safeguard regulated technical data from inadvertent or illegal transmission.
Administrative Management and General Management Consulting Services

POSTED

about 20 hours ago

DEADLINE

in 7 days
View Details
NAICS: 483111
New
DIBBS
Ocean Freight Transportation CoordinationThe contract seeks coordination of ocean freight transportation with a priority on utilizing U.S.-flag vessels whenever feasible, ensuring compliance with all regulatory standards for hazardous materials handling and documentation. The successful vendor will be responsible for preparing accurate bills of lading and managing the end-to-end logistics process to guarantee timely and compliant delivery to DLA San Joaquin. All activities must align with federal transportation and safety protocols, with particular emphasis on documentation integrity and traceability from origin to final destination. The opportunity is classified as a subcontract under NAICS code 483111, with a deadline for responses on July 30, 2026, and a posting date of July 22, 2026. Performance is required at San Diego, CA, with the contracting entity being the Department of Defense under the ASC SUPPLIER OPER AE AND AF DIV. There is no set-aside designation specified, and the contract does not include a designated point of contact. Potential bidders must review the full solicitation through the provided DIBBS link to ensure full compliance with submission requirements and performance expectations.
Deep Sea Freight Transportation

POSTED

about 20 hours ago

DEADLINE

in 7 days
View Details
NAICS: 541620
New
DIBBS
Hazardous Materials Compliance & SDS PreparationThe contract requires identification of hazardous materials involved in manufacturing or packaging processes and the preparation of fully compliant Safety Data Sheets (SDS) in accordance with OSHA 29 CFR 1910.1200 and Federal Standard No. 313. The work focuses on ensuring regulatory adherence for chemical safety documentation, which is critical for workplace safety and legal compliance within defense-related operations. The contractor must accurately assess materials used in production environments and generate SDS documentation that meets federal standards for hazard classification, labeling, and emergency response information. This subcontract is issued under NAICS code 541620 for environmental consulting services and is associated with the Department of Defense's ASC SUPPLIER OPER AE AND AF DIV. The performance location is specified as San Diego, California, with a zip code of 92136-3581. The solicitation was posted on July 22, 2026, with a response deadline of July 30, 2026. Bidders must respond before the deadline to be considered, and the work is expected to support defense supply chain compliance by ensuring accurate and legally valid safety documentation for hazardous substances used in manufacturing or packaging activities.
Environmental Consulting Services

POSTED

about 20 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332710
New
DIBBS
Precision Metal Shim ManufacturingThe contract requires the manufacture of 42 precision metal shims identified by NSN 5365-00-942-1796, with all production activities—including machining, inspection, and packaging—strictly following Department of Defense technical specifications and military standards. The work must be completed in compliance with the NAICS code 332710, which covers other fabricated metal product manufacturing, and performance is to take place at a designated location in San Diego, California, with ZIP code 92136-3581. The solicitation is structured as a subcontract under the ASC SUPPLIER OPER AE AND AF DIV within the Department of Defense, with a response deadline of July 30, 2026, and was posted on July 22, 2026. All deliverables must meet exacting quality and documentation requirements to ensure full alignment with military supply chain protocols.
Machine Shops

POSTED

about 20 hours ago

DEADLINE

in 7 days
View Details
NAICS: 541512
New
DIBBS
Cybersecurity and CDI Compliance SupportThe contract requires the implementation and ongoing maintenance of NIST SP 800-171 security controls to safeguard Covered Defense Information, ensuring compliance with Department of Defense cybersecurity standards. This includes conducting regular assessments to validate the effectiveness of these controls and promptly reporting any cyber incidents as mandated by DFARS regulations. The work is structured as a subcontract under the NAICS code 541512, targeting specialized cybersecurity support services for defense-related operations. All activities must be performed in alignment with federal requirements to protect sensitive information and uphold the integrity of defense systems. The solicitation was posted on July 22, 2026, with a response deadline of July 29, 2026, indicating a tight turnaround for potential subcontractors to submit proposals. The contracting office is the ASC SUPPLIER OPER AE AND AF DIV under the Department of Defense, and while specific performance locations are not detailed, the work is expected to support defense infrastructure wherever Covered Defense Information is handled. Successful bidders must demonstrate proven capability in executing NIST 800-171 requirements, incident response protocols, and defense compliance reporting to meet the stringent security obligations of this engagement.
Computer Systems Design Services

POSTED

about 20 hours ago

DEADLINE

in 6 days
View Details
NAICS: 541330
New
DIBBS
Technical Documentation and Traceability SupportThe contract requires the preparation and ongoing maintenance of comprehensive technical documentation packages for each delivery, ensuring all deliverables are supported by accurate drawings, detailed specifications, and complete traceability records. These documents must be meticulously organized to meet compliance requirements and enable potential reverse-engineering verification, emphasizing precision and continuity throughout the product lifecycle. The effort is critical for sustaining accountability and facilitating technical validation under stringent oversight. This subcontract is issued under NAICS code 541330 by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV, with a response deadline of July 29, 2026, and a posting date of July 22, 2026. Although specific performance location and point of contact details are not provided, the work is intended to support defense-related technical operations with no set-aside designation. All documentation must be delivered in a manner that aligns with federal technical standards and supports long-term operational readiness and audit readiness.
Engineering Services

POSTED

about 20 hours ago

DEADLINE

in 6 days
View Details
NAICS: 484121
New
DIBBS
Logistics and Delivery Services (FOB Origin)The contract involves transporting defense items from the contractor’s facility at FOB Origin to multiple military stock locations across the continental United States, requiring full delivery tracking and comprehensive risk-of-loss management throughout the transit process. All shipments must adhere to strict defense logistics standards, ensuring secure, timely, and accountable movement of sensitive materials to designated DOD inventory points. The contractor is responsible for end-to-end operational control from pick-up at the origin facility until successful receipt and confirmation at the final military destination. This is a subcontract under the Department of Defense, managed by the ASC SUPPLIER OPER AE AND AF DIV, with a NAICS code of 484121 indicating a focus on truck transportation for freight and general logistics services. The solicitation was posted on July 22, 2026, with a firm response deadline of July 29, 2026, and all performance activities are limited to CONUS locations. The contractor must demonstrate capability in handling defense-related logistics, including secure tracking systems, compliance with military delivery protocols, and accountability for any loss, damage, or delay during transit.
General Freight Trucking, Long-Distance, Truckload

POSTED

about 20 hours ago

DEADLINE

in 6 days
View Details
NAICS: 332999
New
DIBBS
Defense Item Manufacturing and PackagingThe contract requires the manufacture, packaging, labeling, and preparation of defense-related items for shipment, with strict adherence to MIL-STD-129 standards for labeling and packaging documentation. Each package must include complete technical documentation to ensure operational readiness and compliance with military logistics requirements. The work is classified as a subcontract under the NAICS code 332999, indicating it involves other miscellaneous manufacturing activities not elsewhere classified, and is being managed by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. Performance is expected to meet rigorous federal defense specifications, and all deliverables must be fully compliant with established military protocols for identification, handling, and documentation. The solicitation was posted on July 22, 2026, with responses due by July 29, 2026, and is accessible via the DIBBS platform for qualified subcontractors.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 20 hours ago

DEADLINE

in 6 days
View Details
NAICS: 488510
New
DIBBS
Packaging, Marking, and Logistics SupportThe contract requires full packaging and marking of aerospace fasteners in strict compliance with MIL-STD-129 and ASTM D3951 standards, ensuring all items are properly labeled, documented, and prepared for military logistics use. In addition to packaging and marking, the contractor must coordinate freight movement and prepare ocean bills of lading specifically for delivery to DLA Warner Robins, aligning all documentation and shipping procedures with Defense Logistics Agency requirements. The work is targeted for performance at Robins Air Force Base, Georgia, with the NAICS code 488510 indicating the scope falls under support activities for air transportation. This is a subcontract opportunity with a response deadline of July 30, 2026, issued under the Department of Defense's ASC SUPPLIER OPER AE AND AF DIV, and all activities must support the secure, accurate, and timely delivery of critical aerospace components to DLA facilities.
Freight Transportation Arrangement

POSTED

about 20 hours ago

DEADLINE

in 7 days
View Details
NAICS: 541690
New
DIBBS
Hazard Warning Labeling and Compliance ServicesThe contract requires the provision of hazard warning labels and the preparation of safety data sheets to ensure full compliance with DFARS 252.223-7001 and OSHA hazard communication standards. This subcontract focuses on delivering accurate, standardized labeling and documentation for hazardous materials used in defense-related operations, with all work to be performed at Robins Air Force Base, Georgia, 31098-1887. The solicitation is open to bidders through July 30, 2026, and falls under NAICS code 541690, which encompasses other scientific and technical consulting services. The contracting entity is the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV, indicating this effort supports military supply chain needs by enforcing regulatory compliance and safety protocols for chemical and material handling across defense systems.
Other Scientific and Technical Consulting Services

POSTED

about 20 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332312
New
DIBBS
Threaded Pin-Rivet Supply (NAS1724V5-13E Compliant)The contract calls for the supply of 429 threaded pin-rivets that must fully comply with the NAS1724V5-13E specifications and meet DLA quality standards, ensuring rigorous adherence to military-grade engineering requirements. All units are subject to zero-defect inspection upon arrival at the designated performance location, Robins Air Force Base, Georgia, with no tolerance for non-conforming items, thereby placing full responsibility on the supplier for quality assurance throughout production and shipment. The solicitation is classified as a subcontract under NAICS code 332312 and is managed by the Department of Defense’s ASC Supplier Oper AE and AF Division, with a clear deadline for responses on July 30, 2026, and the posting date listed as July 22, 2026. Failure to meet the zero-defect standard at destination will result in rejection of the entire lot, requiring suppliers to implement robust inspection protocols and traceability systems prior to delivery.
Fabricated Structural Metal Manufacturing

POSTED

about 20 hours ago

DEADLINE

in 7 days
View Details
NAICS: 541512
New
DIBBS
Electronic Invoicing & WAWF Submission SupportThe contract titled Electronic Invoicing & WAWF Submission Support requires the vendor to prepare and electronically submit invoices and receiving reports through the Wide Area WorkFlow system, adhering to EDI standards for document formatting and submission. This includes handling combined document submissions and resolving errors that arise during the electronic filing process, ensuring compliance with federal procurement requirements. The work is critical to maintaining accurate and timely payment processing for government transactions, with a focus on seamless integration and error resolution within the WAWF environment. This is a subcontract under a Total Small Business Set-Aside designation, meaning only small businesses can compete, and it is classified under the NAICS code 541512 for Computer Systems Design Services. The solicitation was posted on July 22, 2026, with responses due by August 5, 2026, and is managed by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. Performance location details are not specified, and the opportunity is available through the DIBBS portal with a publicly accessible link for further reference.
Computer Systems Design Services

POSTED

about 20 hours ago

DEADLINE

in 13 days
View Details