This Solicitation opportunity from Department Of Defense was posted on May 13, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

TUBE, METALLIC

Closed

SPE4A5-26-T-140CFederal

Submission Closed05/21/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 326122

New

Federal

47--TUBE ASSEMBLY,METAL

DLA Land And Maritime

POSTED

DEADLINE

47--TUBE ASSEMBLY,METALThe contract entails the procurement of metal tube assemblies identified by NSN 4710007883511, with an order for 10 units required to be delivered to the DLA Distribution Depot in Oklahoma within 730 days after order, and an additional single unit with a delivery deadline of 180 days after order to the same location. This solicitation is open to all responsible sources, with a requirement that quotes be submitted electronically by the response deadline of June 26, 2026. This is a combined type contract categorized as a Total Small Business Set-Aside under FAR 19.5, managed by the Defense Logistics Agency (DLA) Land and Maritime, part of the Department of Defense. The solicitation number is SPE7M426T184Y, and it falls under NAICS code 326122. The contracting office is located in Columbus, Ohio, and any inquiries should be directed to the designated buyer via email as specified in the solicitation documentation. The procurement emphasizes timely submission and adherence to outlined delivery schedules.

DLA Land And Maritime

POSTED

DEADLINE

47--TUBE AND FITTINGS,MThe contract solicitation is for the procurement of 30 units of tube and fittings, identified by NSN 4710017055140, to be delivered to AV HHC SSA Katterbach within 10 days after order (ADO). The approved source for this item is specified as 98897 3357627-1. This procurement process is being conducted through a Request for Quote (RFQ), exclusively available online, with no hard copies, specifications, plans, or drawings provided. All responsible sources are invited to submit their quotes electronically, and all timely received quotes will be considered. The solicitation number for this acquisition is SPE4A126T2323, posted on June 14, 2026, with a response deadline of June 22, 2026. It is managed by the Defense Logistics Agency (DLA) Aviation, under the Department of Defense, operating out of Richmond, Virginia. The applicable NAICS code for this procurement is 326122. Interested parties can find the solicitation details and submit their quotes via the provided link, and any questions regarding the solicitation should be directed to the designated buyer via the specified email contact.

POSTED

DEADLINE

Roofing Materials Supply – TPO Membrane and FlashingThis contract involves the supply of 60 mil fleece-backed TPO membrane, flashing, and adhesives that meet stringent industry standards, including ASTM D6878, UL Class A, and FM ratings of 1-60/75/90, ensuring high durability and fire resistance for roofing applications. The materials are intended for roofing projects requiring these specific certifications to guarantee performance and safety. The solicitation was posted on June 11, 2026, with a response deadline set for June 25, 2026. It is classified as a subcontract opportunity under the NAICS code 326122, related to rubber product manufacturing. The contract is managed by a Utah agency, though specific office location and contact details are not provided. Interested suppliers are directed to a designated online portal for further information and submission details.

POSTED

DEADLINE

47--SPOOL PIECE,OUTLETThe contract involves the procurement of seven units of the item identified as NSN 4730015993939, a Spool Piece, Outlet, to be delivered to the DLA Distribution San Joaquin within 402 days after the order date. The solicitation is a Request for Quotation (RFQ) issued by the Defense Logistics Agency (DLA) Land and Maritime, located in Columbus, Ohio, and is set aside entirely for small businesses under the SBA (FAR 19.5). The approved sources for the item are designated as 8FGX3 with reference numbers 33-APIP1109 and ML12439378G1. Interested and responsible vendors are invited to submit electronic quotes by the deadline of June 22, 2026, with no provision for hard copy submissions or access to specifications, plans, or drawings. This solicitation, referenced by number SPE7M326T6731, targets suppliers classified under NAICS code 326122. The procurement process is conducted entirely online through the designated portal, where all related documents and questions must be addressed. The contracting agency emphasizes that all timely electronic submissions will be considered. For further inquiries, points of contact are provided via email, directing suppliers to the solicitation document or the official government marketplace website for additional details.

DLA Land And Maritime

POSTED

6 days ago

DEADLINE

in 5 days

AI Contract Overview

This contract involves the procurement of four units of a metallic tube, identified by NSN 4710-01-677-5407 and Boeing part number 65C18537-169, under solicitation number SPE4A5-26-T-140C. The contract specifies delivery within 170 days FOB origin, with inspection and acceptance taking place at the destination, namely the DLA Distribution Depot Oklahoma at Tinker AFB. Packaging and marking must conform to military standards MIL-STD-2073-1E and MIL-STD-129, respectively, with palletization and packaging requirements governed by DLA procurement policies. There is no shelf-life requirement for the material, and government identification removal applies to non-accepted supplies. The contract also applies tailored and non-tailored higher level quality requirements, including ISO 9001:2015, and incorporates sampling inspection procedures per MIL-STD-1916 or ASQ H1331 standards. The contract is issued by the Department of Defense’s ASC Supplier OEM Division, with key contact information provided for contract inquiries. The solicitation was posted on May 13, 2026, with a response deadline of May 21, 2026, and specifies no quantity variance allowed. All quality assurance, physical identification, and packaging conditions are defined to ensure compliance with government acquisition standards. Shipment is to be coordinated according to Defense Logistics Agency (DLA) transportation procedures for first destination delivery, with an original required delivery date of February 17, 2028, and an initial need date of November 8, 2026.

General Info

Procurement of four metallic tubes, delivered FOB origin, inspected at Tinker AFB, per military standards.

Agency

Department Of Defense → ASC SUPPLIER OPER OEM DIVISION

NAICS

326122 - Plastics Pipe and Pipe Fitting Manufacturing View NAICS

Place of Performance

3301 F AVE CEN REC BLDG 506 DR 22, TINKER AFB, OK, 73145-8000, US

Set-Aside

NONE

Documents

(1)

RFQ SPE4A5-26-T-140C DLA Aviation May 14 2026

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Timeline

PhaseClosed

PostedMay 13

Solicitation

Response DeadlineMay 21

Deadline has passed

Submission Closed

05/21/2026, 05:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → ASC SUPPLIER OPER OEM DIVISION

Contacts1 person available

OfficeUS

Organization / Agency

Department Of Defense → ASC SUPPLIER OPER OEM DIVISION

Office AddressUS

Contacts

Jamie Bonda

contact@example.gov

+1 (555) 000-0000

Full Description

TUBE,METALLIC
TUBE,METALLIC
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD002, COVERED DEFENSE INFORMATION APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
RQ042: Non-Tailored Higher-Level Quality Requirements (ISO 9001:2015) for Manufacturers and Non-Manufacturers
THIS MATERIAL DOES NOT HAVE A SHELF LIFE REQUIREMENT
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
THE BOEING COMPANY 81205 P/N 65C18537-169
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
SPE4A5-26-T-140C
SECTION B
PR: 7016751799 PRLI: 0001 CONT’D
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7016751799 0001 EA 4.000
NSN/MATERIAL:4710016775407
DELIVERY (IN DAYS):0170
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:C
UNIT CONT:E5 OPI:M
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
SW3211
DLA DISTRIBUTION DEPOT OKLAHOMA
3301 F AVE CEN REC BLDG 506 DR 22
TINKER AFB OK 73145-8000
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3211
DLA DISTRIBUTION DEPOT OKLAHOMA
3301 F AVE CEN REC BLDG 506 DR 22
TINKER AFB OK 73145-8000
US
Need Ship Date:11/08/2026 Original Required Delivery Date:02/17/2028
SPE4A5-26-T-140C NSN/Part Number: 4710-01-677-5407 Quantity: 4 EA Purchase Request: 7016751799QTY: 4 Delivery: 170 days ADO