Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

TUBE, METALLIC

Active
SPE7M4-26-T-304FFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specifies the procurement of metallic copper tubing with a standard size of 1/4 inch and a standard coil length of 50 feet, identified by NSN 4710-01-466-3855 and part number ASTM-B280X.250OD, manufactured in compliance with ASTM B280 Revision NR dated 04/01/2020 and TDP Rev A Gen 2. The item is designated as a critical application product, requiring strict adherence to technical and quality standards outlined in the DLA Master List of Technical and Quality Requirements, which supersede all other specifications including ASTM D3951. Packaging must conform to MIL-STD-129 and DLA Packaging Requirements, with all units packed in accordance with ASTM D3951 where not overridden by DLA mandates, and palletization strictly following RP001 guidelines. The contract calls for 24 units to be delivered within two days f.o.b. origin to the DLA Distribution facility in New Cumberland, Pennsylvania, with no tolerance for quantity variance. The delivery must be completed by August 20, 2026, and inspection and acceptance occur at the destination. Transportation and shipping details are governed by DLA procedural notes C19 and C20, and all labeling and identification must follow government protocol including the removal of government identifiers from non-accepted supplies. The procurement is managed under solicitation SPE7M4-26-T-304F, with a unit price of $24.00 per unit, totaling $576.00, and point of contact is Rory O’Reilly of the Department of Defense’s Fluid Handling Division.

General Info

24 units of 1/4 inch copper tubing, NSN 4710-01-466-3855, delivered f.o.b. origin by Aug 20, 2026, at $24 each.

Agency

Department Of Defense → FLUID HANDLING DIVISIONView Agency

NAICS

331210 - Iron and Steel Pipe and Tube Manufacturing from Purchased SteelView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

RFQ SPE7M4-26-T-304F for Fluid Handling Division

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → FLUID HANDLING DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → FLUID HANDLING DIVISION
View Agency Profile
Office AddressUS
Contacts
Rory O'Reilly
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
TUBE,METALLIC
TUBE, METALLIC (copper).
1/4 IN. STANDARD SIZE 50 FT STANDARD LENGTH FOR COILS.
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
INCLUDE CS187 OBJECT TEXT ID ST
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
CRITICAL APPLICATION ITEM
TDP Rev A Gen 2 IAW BASIC NON GOVT STD ASTM B280 REVISION NR DTD 04/01/2020 PART PIECE NUMBER: ASTM-B280X.250OD
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017384328 0001 EA 24.000
NSN/MATERIAL:4710014663855
DELIVERY (IN DAYS):0002
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
SPE7M4-26-T-304F
SECTION B
PR: 7017384328 PRLI: 0001 CONT’D
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:08/20/2026 Original Required Delivery Date:08/20/2026
SPE7M4-26-T-304F NSN/Part Number: 4710-01-466-3855 Quantity: 24 EA Purchase Request: 7017384328QTY: 24 Delivery: 2 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 331210
New
DIBBS
Supply of 4130 Steel Metal Bar (NSN: 9510002035789)The contract requires the procurement and delivery of approximately 334 feet of 4130 steel metal bar, with a tolerance of plus or minus 10 percent, meeting the stringent specifications of SAE AMS-S-6758B and ASTM A700. The material must be properly packaged, preserved using Method ZZ for corrosion and contamination control, and labeled in accordance with hazardous materials regulations to ensure safe handling and transport. The item is identified by NSN 9510002035789 and falls under NAICS code 331210 for steel rolling and drawing. Performance is designated for Tracy, California, with a zip code of 95304-5000. The solicitation was posted on August 5, 2026, and responses are due by August 17, 2026. This is classified as a subcontract under the Department of Defense’s Construction & Equipment MRO_svc I program, though no set-aside type is specified. All deliverables must comply with federal and military standards for material quality, documentation, and hazardous material handling.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 18 hours ago

DEADLINE

in 11 days
View Details
NAICS: 331210
New
DIBBS
TUBE, METALLIC
Solicitation # SPE7M4-26-T-303P
The contract specifies the procurement of 20 units of metallic tubing made from aluminum alloy 6061-T6 in seamless rectangular form measuring 3.00 by 1.00 inches with a wall thickness of 0.125 inches and a total length of 252 inches, conforming to ASTM standards for aluminum extruded tubes. Each unit constitutes one 21-foot length and is subject to the DLA Master List of Technical and Quality Requirements, with packaging and marking mandated to comply with MIL-STD-2073-1E and MIL-STD-129 respectively. The tubing must be free of Class I ozone-depleting chemicals, and any substitute chemicals require prior approval. The item is identified by NSN 4710-01-234-8297 and is to be delivered FOB origin, with inspection and acceptance occurring at the destination, and no variance in quantity is permitted. The delivery schedule requires fulfillment within 136 days from contract award, with a required ship date of January 1, 2027. Packaging must align with DLA packaging directives, including palletization and container specifications, and all items must be marked as specified with no special marking codes applied. The shipment is to be routed to DLA Distribution Warner Robins at Robins Air Force Base, Georgia, under transportation guidelines referenced in DLAD Proc Note C19 and C20. The solicitation number is SPE7M4-26-T-303P, issued under full and open competition, with a unit price of $0.000 and a total contract value of $0.000, and the point of contact is Rory O'Reilly of the Department of Defense’s Fluid Handling Division.
FLUID HANDLING DIVISION

POSTED

about 18 hours ago

DEADLINE

in 11 days
View Details
NAICS: 331210
New
DIBBS
TUBE, METALLIC
Solicitation # SPE7M4-26-T-303N
The contract specifies the procurement of seamless copper tubing with a 0.500 inch outer diameter, manufactured to meet ASTM B280 Revision 23 dated October 1, 2023, for use in air conditioning and refrigeration field service. The tubing must comply with all applicable technical and quality requirements outlined in the DLA Master List of Technical and Quality Requirements, which take precedence over any other specifications including ASTM D3951. The item is classified as a critical application product and strictly prohibits the use or incorporation of Class I ozone-depleting chemicals; any substitute chemicals require prior approval unless explicitly authorized by the specification. Sampling and inspection must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, with attributes assigned verification levels or AQLs based on criticality. Packaging must adhere to MIL-STD-129 and RP001 DLA Packaging Requirements, with palletization and labeling conforming to specified standards. The quantity ordered is 20 feet, with a 10% variance allowance, and delivery is FOB origin with inspection and acceptance occurring at the destination. The required delivery date is 140 days from contract award with an original due date of September 29, 2026, and a needed ship date of January 5, 2027. The NSN is 4710-01-421-6663 and the purchase request number is 7017437876. All shipments must be addressed to the DLA Distribution facility in New Cumberland, Pennsylvania, and transportation procedures must follow DLAD Proc Note C19 and C20. Full and open competition applies, with no set-aside provisions.
FLUID HANDLING DIVISION

POSTED

about 18 hours ago

DEADLINE

in 11 days
View Details
NAICS: 331210
New
DIBBS
GOVERNMENT FIRST ARTIC
Solicitation # SPE7M4-26-T-303R
This contract pertains to the procurement of a single metallic tube and fitting unit with NSN 0001S00000052, under solicitation SPE7M4-26-T-303R, which is a total small business set-aside classified under NAICS code 331210. Delivery is required within 709 days after delivery order issuance, and the offer response deadline is August 17, 2026. The technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions effective as of the solicitation issue date or award date depending on acquisition type. The item is subject to tailored higher-level quality requirements, configuration change management protocols, and inspection and acceptance at the manufacturer’s origin. Government identification must be removed from non-accepted supplies, and export-controlled technical data governed by ITAR or EAR applies, restricting disclosure to foreign persons regardless of location. Only contractors with approved US/Canada Joint Certification Program certification, completed DOD export control training, and DLA authorization may handle this data, in compliance with DFARS 252.225-7048. Packaging must meet DLA-specific standards, and the contract requires Cybersecurity Maturity Model Certification Level 2 compliance through a certified third-party assessment organization. Government first article inspection is mandatory, and the point of contact for inquiries is Rory O’Reilly of the Department of Defense’s Fluid Handling Division, with performance to occur at Hill AFB, Utah.
FLUID HANDLING DIVISION

POSTED

about 18 hours ago

DEADLINE

in 11 days
View Details
NAICS: 331210
New
DIBBS
BAR, METAL
Solicitation # SPE8E4-26-T-2020
The contract specifies the procurement of a metal bar designated as a "DETENT ROD" with part number 593-6961210 PC2 and NSN 9510-01-565-2275, requiring a precise length of 2.56 inches. The item must comply with technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, with verification levels for critical, major, and minor attributes defined as VII, IV, and II respectively, or AQLs of 0.1, 1.0, and 4.0. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1, with zero non-conformances required unless otherwise stated, and manufacturers may choose between attribute or variable inspection methods. The product must adhere to MIL-STD-129R for marking, MIL-STD-2073-1E for packaging, and DLA packaging requirements, with no special marking codes applied. The material must meet ASTM A700-14 (R2019) specifications and the contract references QAP 13873 for metal certification. The contract calls for delivery of 182 units with a required delivery date of January 19, 2027, and a lead time of 71 days FOB origin. The purchase request number is 7017422082, with a unit price of $182.00 and a total price of $33,124.00. All units must be shipped to the DLA Distribution facility at 2083 Normandy Drive, New Cumberland, PA 17070-5002, following parcel post address W25G1U and freight shipping address W1A8. Packaging must conform to RP001 and IP083 requirements for metal products, and unit of issue is EA. The solicitation, issued under contract SPE8E4-26-T-2020, was posted on August 5, 2026, with a response deadline of August 17, 2026, and is managed by the Department of Defense through the DDSP New Cumberland Facility. The point of contact is Drew Reily, and the contract is governed by DoD procurement protocols including DLA Proc
DDSP NEW CUMBERLAND FACILITY

POSTED

about 18 hours ago

DEADLINE

in 11 days
View Details
NAICS: 331210
New
DIBBS
TUBE, DEFUELING
Solicitation # SPE7M0-26-T-031Z
The contract pertains to the procurement of a single unit of a TUBE, DEFUELING item, identified by NSN 4710-00-238-6158, under solicitation SPE7M0-26-T-031Z, with a required delivery within five days of award. The item must be furnished FOB origin with no tolerance for quantity variance, inspected and accepted at the point of origin, and packaged in strict compliance with MIL-STD-2073-1E and MIL-STD-129 marking standards. Packaging must adhere to DLA’s specific procurement requirements, including palletization and containment specifications, with no special marking required. The contract explicitly prohibits the use of ozone-depleting chemicals and any intentional introduction of mercury or mercury-containing compounds, except for specific functional applications such as batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or chemical reagents specified by NAVSEA, with additional requirements for secondary containment and shockproofing where applicable. All technical and quality requirements referenced by R or I numbers are sourced from the DLA Master List, with applicable revisions controlled by the solicitation or award date depending on the acquisition size. Configuration changes require formal engineering change proposals or variance requests, and substitute chemicals must be pre-approved unless already authorized. The delivery destination is the Arsenal de Ferrol in Spain, with freight forwarding governed by DLA procedural notes, and the contract is subject to full and open competition under a NAICS code of 331210. The response deadline is set for August 17, 2026, with an original required delivery date of January 26, 2026.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 18 hours ago

DEADLINE

in 11 days
View Details
NAICS: 331210
New
DIBBS
TUBE, METALLIC
Solicitation # SPE7M4-26-T-304D
The contract is for the procurement of 325 feet of metallic tube identified by NSN 4710-01-438-3116 under solicitation SPE7M4-26-T-304D, issued by the Department of Defense’s Fluid Handling Division. The item is to be delivered to Robins AFB, Georgia, with a delivery deadline of 154 days after award, and responses to the solicitation are due by August 17, 2026. The supplier is required to include all data mandated by the DLA Packaging Requirements for Procurement in the item’s price and must provide a Certificate of Quality Compliance for each manufacturing lot, with one copy per lot based on product specification, OEM part number, or technical documentation, all prepared in accordance with the Supplemental Quality Assurance Provision. For contracts subject to Government inspection at source, the completed COQC must be available for review by Government representatives at the time of material presentation, and compliance permits the official sign-off on the WAWF receiving report provided the documentation is uploaded as an attachment to the Production CLIN in iRAPT. The supplier must also submit an electronic copy of every COQC to the iRAPT system via the Receiving Report’s Attachment tab for Government records retention.
FLUID HANDLING DIVISION

POSTED

about 18 hours ago

DEADLINE

in 11 days
View Details
NAICS: 331210
New
DIBBS
TUBE, METALLIC
Solicitation # SPE7M4-26-T-301T
This contract involves the procurement of a metallic tube item designated by part number WWT700/4-O-I-1.750X0.049 and NSN 4710-00-279-0961, with a total quantity of 410 feet to be delivered under solicitation SPE7M4-26-T-301T. The product must comply with the SAE AMS-WW-T-700 specification, Revision B dated January 1, 2018, and is classified as a critical application item requiring strict adherence to technical and quality standards. All deliveries must meet DLA packaging requirements per MIL-STD-2073-1E and ASTM B660, with marking in accordance with MIL-STD-129 and no special markings required. The tubing must be free from Class I ozone-depleting chemicals, and any substitute chemicals must receive prior approval. Metal certification data is mandatory and governed by CDRL-METALSCERT, which must be provided as referenced in the Technical Data Package and aligned with DLA’s Master List of Technical and Quality Requirements. Delivery is required FOB origin within 140 days of contract award, with a delivery deadline of January 5, 2027, and a permitted quantity variance of plus or minus 10%. Inspection and acceptance occur at the destination, specifically at the DLA Distribution facility in Warner Robins, Georgia. Packaging must be palletized per RP001, and the unit of issue is feet as defined by DoD standards. The contract is open to full and open competition with no set-aside, and all suppliers must comply with the DLA Technical Data Management Transformation system for access to required documentation. The contract includes provisions for removal of government identification from non-accepted supplies, use of calibrated measuring and test equipment, and tailored higher-level quality requirements applicable to both manufacturers and non-manufacturers. Freight and shipping details are governed by DLA procedural notes, and all data requirements must align with the contract’s specified revisions and effective dates as defined by the DLA procurement framework.
FLUID HANDLING DIVISION

POSTED

about 18 hours ago

DEADLINE

in 11 days
View Details
NAICS: 331210
New
DIBBS
PIPE, PLASTIC
Solicitation # SPE7M4-26-T-301Z
The contract specifies the procurement of 104 units of a nonmetallic plastic pipe made from phenolic-resin (FBE) material, molded to an inner diameter of 7/8 inch and an outer diameter consistent with a 4-1/32 inch length, meeting the technical specifications previously defined under MIL-P-79, which has been cancelled and replaced by MIL-I-24768/13 for electrical applications. The product is identified by NSN 4710-00-844-2562 and is intended for use in nonmetallic, high-performance electrical environments. All requirements are subject to the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation issue date or award date depending on acquisition size. Packaging, identification, and non-accepted supply handling follow DLA-specific protocols, and full and open competition applies. The supplier is required to provide a Certificate of Quality Compliance for each manufacturing lot, prepared in accordance with the Supplemental Quality Assurance Provision, with one physical copy delivered alongside the goods and an electronic version uploaded to the iRAPT system via the Receiving Report attachment tab. For government inspections at source, the certificate must be available for review during acceptance, and Government representatives may sign off on the WAWF receiving report upon verification of compliance. The data associated with this contract, including the COQC documentation, is included in the item’s price and must be fully executed by the supplier. Solicitations are open under contract number SPE7M4-26-T-301Z, with bids due by August 17, 2026, and delivery expected within 197 days after contract award, with performance to be completed at New Cumberland, Pennsylvania, 17070-5002, under the oversight of the Department of Defense’s Fluid Handling Division.
FLUID HANDLING DIVISION

POSTED

about 18 hours ago

DEADLINE

in 11 days
View Details
NAICS: 331210
New
DIBBS
TUBE, METALLIC
Solicitation # SPE7M4-26-T-301J
The contract requires the supply of metallic tubing made from aluminum alloy 2024 in temper T-3, seamless, with an outer diameter of 0.875 inches and a minimum wall thickness of 0.095 inches, supplied in random lengths between 8.0 and 12.0 feet. The material must comply with SAE AMS-WW-T-700/3A, excluding paragraphs 6.2 d and g. A total of 331 feet is needed, identified by NSN 4710-00-278-6362, with delivery due within 105 days of award. The procurement is for full and open competition under the NAICS code 331210, managed by the Department of Defense’s Fluid Handling Division. All supplies must be free of Class I ozone-depleting chemicals, and any substitute chemicals require prior approval unless explicitly authorized by the specification. The supplier must provide a Certificate of Quality Compliance for each manufacturing lot, prepared in accordance with the Supplemental Quality Assurance Provision, and submit an electronic copy to the iRAPT system via the Receiving Report attachment tab. For government-inspected contracts, the certificate must be available at the time of material presentation for acceptance, and compliance must be documented in WAWF. Configuration changes require an Engineering Change Proposal or variance request, and all quality and technical requirements referenced in the DLA Master List govern this procurement. Packaging must meet DLA standards, and government identification must be removed from non-accepted supplies. The solicitation number is SPE7M4-26-T-301J, with a response deadline of August 17, 2026, and point of contact is Rory O’Reilly.
FLUID HANDLING DIVISION

POSTED

about 18 hours ago

DEADLINE

in 11 days
View Details
NAICS: 331210
New
DIBBS
TUBE, METALLIC
Solicitation # SPE7M4-26-T-302U
The contract specifies the procurement of metallic tubing made from corrosion-resistant steel meeting SAE AMS specification S21900, described as round, plain-ended, straight-seamed, fusion-welded tubing with a 3/8 inch outer diameter and 0.020 inch wall thickness, available in lengths between 10 and 24 feet. The material must comply with stringent technical and quality standards, including mandatory marking every three feet with the producer’s name and trademark, specification number, composition, size, contract number, national stock number, and weld type indicator “W.” Additional requirements prohibit the use of ozone-depleting chemicals and restrict mercury or mercury-containing compounds except under specific exemptions such as functional devices in weapon systems or instrumentation. The tubing is classified as a critical application item and must be inspected and accepted at the origin, with sampling governed by MIL-STD-1916 or comparable zero-based plans and requiring zero non-conformances unless otherwise specified. Metal certification documentation is required, and packaging must adhere to MIL-STD-2073-1E and DLA packaging guidelines, with bundling required for pipe larger than 1.5 inches and individual master lifts limited to 2000 pounds. The contract includes two line items for a total quantity of 526 feet, with delivery scheduled to occur within 77 days from the required delivery date of May 10, 2027, and FOB origin terms apply with a 10 percent quantity variance allowance. Deliveries are to be routed to two DLA distribution centers in San Diego, California, and Robins Air Force Base, Georgia, using unit of issue in feet. All shipments must conform to MIL-STD-129 marking standards, with no special marking codes applied, and palletization must follow DLA packaging requirements. Full and open competition applies, and the procurement is subject to DoD contract data requirements including CDRLs for metal certification. The solicitation number is SPE7M4-26-T-302U, issued by the Department of Defense’s Fluid Handling Division, with a bid response deadline of August 17, 2026, and the contract is governed by the revision of the DLA Master List of Technical and Quality Requirements effective as of the solicitation issue date.
FLUID HANDLING DIVISION

POSTED

about 18 hours ago

DEADLINE

in 11 days
View Details
NAICS: 331210
New
DIBBS
TUBE, METALLIC
Solicitation # SPE7M4-26-T-301C
This contract specifies the procurement of seamless aluminum alloy tubing made from 6061-T6 material, with an outside diameter of 0.750 inch and a wall thickness of 0.049 inch, delivered in random lengths between 10 and 12 feet. The tubing must meet the Aerospace Material Specification AMS4083N and be solution heat treated and artificially aged to achieve the T6 temper. All materials must comply with strict quality and inspection standards, including zero non-conformances in sampling per MIL-STD-1916 or equivalent zero-based plans, and critical attributes must be verified at the highest levels. Continuous identification marking per SAE-AMS-STD-185 is required, and bundle tagging is prohibited. The product is designated as a critical application item and must be free of ozone-depleting chemicals, with any substitutes requiring prior approval. Preservation and packaging must follow ASTM B660 and MIL-STD-2073-1E, using Level A preservation methods, with marking in accordance with MIL-STD-129 and no special markings. The tubing is subject to metal certification requirements, and quality assurance documentation must be submitted as per CDRL-METALSCERT. The delivery quantity is 654 linear feet, with a 10% variance allowed, and all items are to be delivered FOB origin within 19 days of order placement. Delivery is to Hill Air Force Base, Utah, with the original required delivery date set for June 30, 2027, and a need ship date of September 6, 2026. Full and open competition applies, and the procurement is governed by Department of Defense acquisition regulations and technical data packages referenced in the contract.
FLUID HANDLING DIVISION

POSTED

about 18 hours ago

DEADLINE

in 11 days
View Details

More opportunities from Department Of Defense → FLUID HANDLING DIVISION

Same awarding agency

NAICS: 484220
New
DIBBS
Priority-Rated Order Fulfillment (DX/DO Rating)This contract mandates the fulfillment of a priority-rated order under the Department of Defense’s DX/DO national defense rating system, requiring expedited supply chain execution to meet accelerated delivery timelines critical to national defense operations. The work must be performed in Anniston, Alabama, with all activities aligned to the NAICS code 484220, indicating specialized freight logistics services. As a subcontract, it is subject to stringent compliance with defense procurement protocols, including adherence to priority rating requirements that supersede standard commercial delivery schedules. The solicitation opens on August 5, 2026, and responses are due by August 17, 2026, with the Fluid Handling Division of the Department of Defense managing the procurement through the DIBBS platform.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 18 hours ago

DEADLINE

in 11 days
View Details
NAICS: 541512
New
DIBBS
Cybersecurity Compliance for Controlled Unclassified Information (CUI)The contract requires the implementation and ongoing maintenance of cybersecurity controls aligned with NIST SP 800-171 to safeguard Controlled Unclassified Information (CUI) processed, stored, or transmitted on non-federal systems supporting the agreement. Compliance with these controls is mandatory and must be continuously validated to ensure the protection of sensitive data on contractor-managed networks and environments. The work is scoped to support the FLUID HANDLING DIVISION under the Department of Defense, with performance located in Anniston, Alabama, and requires adherence to the NAICS code 541512 for custom computer programming services. The solicitation is issued as a subcontract with a response deadline of August 17, 2026, and was posted on August 5, 2026. Contractors must demonstrate the capability to establish, document, and sustain the required security controls as outlined in NIST SP 800-171, including but not limited to access control, audit and accountability, configuration management, identification and authentication, and incident response. Failure to meet compliance standards may result in contractual breach or termination, and ongoing monitoring and reporting of control implementation will be expected throughout the performance period.
Computer Systems Design Services

POSTED

about 18 hours ago

DEADLINE

in 11 days
View Details
NAICS: 541690
New
DIBBS
Hazardous Materials Compliance and SDS ManagementThe contract pertains to the identification, documentation, and ongoing management of Safety Data Sheets for hazardous materials utilized in manufacturing or finishing processes under the Fluid Handling Division of the Department of Defense. Responsible parties must ensure full compliance with regulatory standards by accurately cataloging all hazardous substances, maintaining up-to-date SDS documentation, and implementing systems for continuous monitoring and updates as materials or processes change. The work is to be performed at a location in Anniston, Alabama, with a zip code of 36201-4199, and must be completed in alignment with the NAICS code 541690, which covers other scientific and technical consulting services. Proposals are due by August 17, 2026, and the solicitation was posted on August 5, 2026, with the contract designated as a subcontract. All activities must support the defense sector's safety and regulatory obligations without deviation, requiring robust procedures for traceability, accessibility, and training related to hazardous material handling.
Other Scientific and Technical Consulting Services

POSTED

about 18 hours ago

DEADLINE

in 11 days
View Details
NAICS: 493190
New
DIBBS
Military-Compliant Packaging and Marking ServicesThe contract requires comprehensive packaging, labeling, and marking services for hydraulic tubes to meet strict military logistics standards, ensuring full traceability and readiness for distribution through the Defense Logistics Agency. All work must adhere to specified military compliance requirements to maintain supply chain integrity and operational readiness, with the performance location designated as Anniston, Alabama, at the zip code 36201-4199. The solicitation is issued as a subcontract under NAICS code 493190 by the Fluid Handling Division of the Department of Defense, and responses are due by August 17, 2026, with the opportunity posted on August 5, 2026. All activities must be executed to guarantee seamless integration into DLA’s distribution network, with emphasis on accuracy, durability, and regulatory alignment.
Other Warehousing and Storage

POSTED

about 18 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332996
New
DIBBS
Precision Hydraulic Tube Bending and FabricationThe contract calls for the precise manufacture and supply of bent metallic hydraulic buffer tubes adhering strictly to military specifications and quality standards, encompassing the full range of fabrication activities from material sourcing to final inspection. Each component must be produced using approved methodologies for precision bending, surface finishing, and dimensional accuracy, ensuring full compliance with designated military drawings and performance requirements. The work demands rigorous control over material integrity, process consistency, and quality assurance throughout all phases of production. Performance is required at the specified location in Anniston, Alabama, with a deadline for responses set for August 17, 2026. This is a subcontract opportunity under NAICS code 332996, managed by the Fluid Handling Division of the Department of Defense, indicating its direct relevance to defense-related fluid systems. All suppliers must demonstrate proven capability in meeting military-grade fabrication standards and be prepared to undergo stringent inspection protocols to validate conformity. The opportunity is open to qualified subcontractors without set-aside restrictions, and interested parties must submit proposals through the designated DIBBS portal prior to the closing date.
Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332912
New
DIBBS
Supply of Threaded Tube Fitting PlugsThe contract is for the procurement of commercial off-the-shelf threaded tube fitting plugs designed to seal unused ports in fluid or gas systems, with a total requirement of 1,668 individual plugs delivered in 834 packaging units, each containing two plugs. The solicitation is issued under the NAICS code 332912 and is structured as a subcontract, with a response deadline of August 17, 2026, and a posted date of August 5, 2026. Performance is specified to occur at Robins Air Force Base, Georgia, with the procurement managed by the Fluid Handling Division of the Department of Defense through its DIBBS platform. There is no set-aside designation specified, and no point of contact details are provided within the contract data.
Fluid Power Valve and Hose Fitting Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334290
New
DIBBS
Domestic Manufacturer of Military Interconnecting BoxesThe contract calls for the domestic manufacture and supply of interconnecting boxes that meet strict military specifications, with full adherence to the Berry Amendment and Buy American Act requirements, ensuring all materials and processing originate entirely within the United States. The products are intended for use by the Department of Defense’s Fluid Handling Division and must be delivered to the specified place of performance in Norfolk, Virginia, with a zip code of 23511-2701. The solicitation is structured as a subcontract opportunity under NAICS code 334290, which corresponds to Other Electrical Equipment and Component Manufacturing, indicating the technical nature of the components involved. Interested vendors must submit their responses by the deadline of August 17, 2026, with the solicitation posted on August 5, 2026. There is no designated set-aside for small businesses or other categories, meaning all qualified domestic manufacturers may compete. The contract emphasizes complete compliance with federal domestic sourcing mandates, requiring rigorous documentation and verification of origin for all materials and labor. All work must be performed in the United States, and the final products must be certified as meeting military standards without exception. The solicitation details can be accessed online through the DIBBS portal using the provided reference number.
Other Communications Equipment Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334290
New
DIBBS
Supply of Interconnecting Box (NSN: 5975015621270)The contract entails the procurement and delivery of six military-specification interconnecting boxes designated by NSN 5975015621270, to be delivered in full compliance with Defense Logistics Agency standards. Each unit must adhere to strict requirements for marking, hazardous materials disclosure, and cybersecurity protocols for covered defense information, ensuring both operational integrity and regulatory compliance. The delivery location is specified as Norfolk, Virginia, with the zip code 23511-2701, and the procurement is being managed by the Fluid Handling Division under the Department of Defense. Submitted responses are due by August 17, 2026, with the solicitation posted on August 5, 2026, under a subcontract structure classified under NAICS code 334290, which pertains to other electronic component manufacturing. Although no set-aside criteria or point of contact are provided, the requirement remains strictly for defense-related hardware meeting federal specifications. The full details and submission instructions are accessible via the DIBBS platform using the provided link.
Other Communications Equipment Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 11 days
View Details
NAICS: 484220
New
DIBBS
Domestic Freight and Delivery to Anniston, AL (FOB Origin)The contract covers the domestic transportation of packaged and labeled strainer elements from the contractor’s origin to the Fluid Handling Division located in Anniston, Alabama, under FOB Origin terms, meaning the buyer assumes responsibility for the goods once they leave the seller’s location. Delivery confirmation is required to verify successful receipt at the destination, ensuring accountability throughout the shipment process. The NAICS code 484220 indicates this is a freight transportation arrangement, specifically for trucking services related to household goods and moving services, though applied here to industrial components. This subcontract is issued by the Department of Defense’s Fluid Handling Division and is open for response until August 17, 2026, with the solicitation posted on August 5, 2026. The place of performance is clearly identified as Anniston, AL, with a ZIP code of 36201-4199, and the full logistical details are accessible through the provided DIBBS link for potential respondents.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 18 hours ago

DEADLINE

in 11 days
View Details
NAICS: 561910
New
DIBBS
Military Shipment Labeling and Marking ServicesThe contract requires compliance with MIL-STD-129 standards for the accurate application of shipment markings and labels on military cargo, including the use of standardized barcoding systems and mandatory hazardous material warnings aligned with federal transportation regulations. All labeling must be executed with precision to ensure proper identification, handling, and tracking of shipments throughout the defense supply chain, with particular attention to safety and regulatory adherence for dangerous goods. The work is scoped under subcontract terms with a performance location in Anniston, Alabama, 36201-4199, and is managed by the Fluid Handling Division of the Department of Defense. The solicitation is open for responses until August 17, 2026, with a posting date of August 5, 2026, and falls under NAICS code 561910 for other support activities for transportation. Bidders must be prepared to meet stringent military specifications and ensure full compliance with all federal and DoD labeling requirements to qualify for award.
Packaging and Labeling Services

POSTED

about 18 hours ago

DEADLINE

in 11 days
View Details
NAICS: 385100
New
DIBBS
Military-Compliant Packaging and Preservation ServicesThis contract requires the cleaning, drying, and preservation of strainer elements in strict accordance with MIL-STD-2073-1E Method 33, Material 19, to meet military-standard criteria for protection during shipment and long-term storage. The work must ensure that each strainer element is prepared to withstand environmental hazards and maintain operational readiness throughout its lifecycle in military supply chains. The services are tied to a specific technical requirement that mandates adherence to federal defense packaging protocols, emphasizing material compatibility, moisture control, and corrosion prevention. The contract is classified as a subcontract under the NAICS code 385100, issued by the Fluid Handling Division of the Department of Defense, with performance location set at Anniston, Alabama, 36201-4199. The solicitation was posted on August 5, 2026, and responses are due by August 17, 2026. There is no set-aside designation specified, and the opportunity is open to qualified subcontractors capable of delivering compliant preservation services. All work must align with the established military standard without deviation to ensure compatibility with defense logistics systems and readiness requirements.

POSTED

about 18 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332996
New
DIBBS
Manufacturing of Sediment Strainer Elements (Oil Intake Screen Assembly)The contract involves the fabrication and assembly of 421 military-grade sediment strainer elements designated by NSN 4730-00-287-1938, intended for use in oil intake systems. All units must fully comply with Department of Defense technical standards and quality requirements, ensuring durability and performance under demanding operational conditions. The work is scoped as a subcontract under the NAICS code 332996, with performance required at the specified location in Anniston, Alabama, with a zip code of 36201-4199. The solicitation was posted on August 5, 2026, and responses are due by August 17, 2026, under the oversight of the Fluid Handling Division of the Department of Defense. The contract seeks a qualified manufacturer capable of meeting exacting military specifications for filtration components critical to system reliability.
Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 11 days
View Details