Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 14 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Tube Nipple Forging and Fabrication

Active

Federal

Response Deadline10/19/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the forging and machining of tube nipple components for prime contractors supporting the DLA Weapons Support Fluid Handling Division. The contractor is responsible for executing the forging process in strict accordance with TDP Rev A Gen 1 and Reference Drawing 81755 162001ISS204, Revision R4. To ensure the manufacturing process is validated and meets all drawing specifications, the contractor must perform a First Article Test and utilize specialized forging presses and custom tooling. The project falls under NAICS code 332311 and is managed by the Department of Defense. Interested parties must adhere to the timeline established by the posting date of October 6, 2026, with a response deadline set for October 19, 2026. The final deliverable consists of finished tube nipple components that fully comply with all technical requirements.

General Info

Agency

Department Of Defense → DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

NAICS

332311 - Prefabricated Metal Building and Component Manufacturing

Place of Performance

USA

Set-Aside

NONE

Documents

This scope was carved out of SPE7M3-27-T-0123.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

NIPPLE, TUBE

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 6

subcontract

Response DeadlineOct 19

Submission deadline

Response Deadline

10/19/2026, 05:00:00 PM UTCin 12 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs forging and machining of NIPPLE, TUBE components for prime contractors on DLA Weapons Support Fluid Handling Division projects. Executes forging process per TDP Rev A Gen 1 and Reference Drawing 81755 162001ISS204, Revision R4. Performs First Article Test (FAT) to validate manufacturing process. Requires forging presses and custom tooling. Delivers finished NIPPLE, TUBE components meeting all drawing specifications.

Similar Contracts

Same NAICS industry code

Miscellaneous Metals FabricationThis subcontract opportunity with Manson Construction Co. involves the fabrication and delivery of custom steel components and miscellaneous metals for marine development projects at the Port of Tampa Bay. The scope of work specifically focuses on providing fabricated steel to prime contractors to support infrastructure development, such as the Berth 266 bulkhead project. The contract is designated as a set-aside for Small Businesses and Disadvantaged Business Enterprises under the Department of Transportation, falling under NAICS code 332311. Interested parties must submit their responses by October 16, 2026.

Manson Construction Co.

POSTED

about 7 hours ago

DEADLINE

Supplier of Reducing Pipe Tees (P/N 4429K337)This subcontract, issued by the Department of Defense under the DLA Weapons Support Fluid Handling Division, requires the procurement or manufacture of seven reducing pipe tees, part number 4429K337. The selected supplier is responsible for ensuring all units meet specific packaging and marking standards in accordance with MIL-STD-2073-1E. Logistics must be coordinated for delivery to DLA Distribution centers located in Albany, Georgia, and the DDSP New Cumberland Facility in Pennsylvania. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 332311. Interested parties must submit their responses by October 19, 2026. This contract supports prime contractors fulfilling broader DLA supply requirements through the delivery of these specialized components.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 18 hours ago

DEADLINE

Metal Tube Assembly ManufacturingThis subcontract involves the manufacture and supply of one Metal Tube Assembly for prime contractors supporting the Department of Defense, specifically the DLA Weapons Support Fluid Handling Division. The selected provider is responsible for fabricating metal tubing to precise specifications for NSN 4710017296491 and assembling all necessary tube components. The contractor must ensure that all packaging and marking strictly adhere to MIL-STD-2073-1E and comply with the DLA Master List of Technical and Quality Requirements. Performance will take place at McConnell AFB, with a response deadline set for October 19, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 18 hours ago

DEADLINE

Modular Building Supply & FabricationThis subcontract involves the supply and fabrication of climate-controlled modular building units for prime contractors working on Department of Defense government facility projects. The scope of work includes the design and manufacture of off-the-shelf modular classrooms, restroom modules, and Watch Operations Centers. Key technical requirements involve the integration of HVAC systems for climate control and the implementation of specialized interior fit-outs tailored for Watch Operations Center layouts, with the final delivery of completed units to the project site. The project is managed under NAICS code 332311 and will be performed in Montgomery, Alabama. Interested parties should note the response deadline of October 13, 2026, for this opportunity associated with the FA3300 42 Cons Cc agency.

FA3300 42 Cons Cc

POSTED

about 23 hours ago

DEADLINE

Specialized Facility SuppliesThis subcontract opportunity, titled Specialized Facility Supplies, is issued by Garney Pacific, Inc. for projects associated with the Eastern Municipal Water District. The scope of work involves the supply, delivery, and installation of laboratory equipment, wood casework, and cathodic protection systems. The goal is to provide fully outfitted laboratories and protected steel structures to support prime contractors on facility projects. The solicitation is specifically set aside for small businesses, including certified Veteran Owned, Service-Disabled Veteran Owned, Women-Owned, and HUBZone small businesses. Interested parties must submit their responses by the deadline of November 17, 2026. The contract falls under NAICS code 332311 and is linked to the Purified Water Replenishment San Jacinto Valley Advanced Water Purification Facility in California.

Garney Pacific, Inc.

POSTED

DEADLINE

in about 1 month

Helical Compression Spring Supply (NSN 5360016669568)This subcontract involves the supply of two helical compression springs, identified by part number 3171566-1 and NSN 5360016669568, for the DLA Weapons Support Aviation Supply Chain. The components must adhere to the technical specifications established by either Aero International, LLC or Honeywell International Inc. The contract is categorized under NAICS code 332311 and requires delivery via FOB Origin for final inspection and acceptance at the DLA Distribution Depot Oklahoma, with the place of performance located at Tinker AFB. The solicitation was posted on October 5, 2026, with a response deadline of October 13, 2026.

DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN

POSTED

DEADLINE

(5) 20FT & (1) 10FT CONEX BOXES PNSY

Solicitation # N3904026Q3156

Solicitation N3904026Q3156 is a total small business set-aside request from the Portsmouth Naval Shipyard for the rental of five 20-foot by 8-foot and one 10-foot by 8-foot Conex boxes to be used as dry storage in Kittery, Maine. The base period of performance runs from October 26, 2026, to October 25, 2027, with three subsequent option periods extending through September 25, 2029. All units must be water tight, free of rust, and in good aesthetic condition, with each unit featuring a waterproof case affixed to it containing lifting and handling certifications for its padeyes. Delivery is specified as F.O.B. Destination, and final acceptance is contingent upon inspection by an authorized government representative. The contract will be awarded based on best value, with technical acceptability and past performance weighted significantly more than price. Vendors must provide documentation of two relevant projects completed within the last five years and demonstrate the capability to fulfill the statement of work. Quotes must be submitted via email to the primary point of contact by October 8, 2026, and must remain firm for 60 days. Payment will be processed through Wide Area Workflow or via Government Commercial Purchase Card for amounts up to 100,000 dollars. Compliance with various NAVSEA packaging, marking, and safety standards is required, including specific security protocols for site access and vehicle identification.

Portsmouth Naval Shipyard Gf

POSTED

DEADLINE

Supply of Steam Table Pan Covers (NSN 7310-00-834-4480)This subcontract involves the supply of ten full-sized steam table pan covers, identified by NSN 7310-00-834-4480, to support prime contractors under DLA Troop Support subsistence supply contracts. The Department of Defense, specifically the Subsistence FSE Supply Chain, requires that all covers be manufactured or sourced in strict compliance with BASIC CID A-A-50179C, Revision NR C, Part Piece Number A-A-50179PARA 3.1.1. All items must be packaged according to ASTM D3951 standards. The performance of this contract is centered in Windsor Locks, Connecticut, under NAICS code 332311. Interested parties must adhere to the established timeline, with the response deadline set for October 8, 2026.

SUBSISTENCE FSE SUPPLY CHAIN

POSTED

DEADLINE

GAOA Trujillo Meadows Old Toilet Building Replacement RGNF

Solicitation # 1240LP26Q0199

Solicitation 1240LP26Q0199 is a combined synopsis and request for quotation issued by the USDA Forest Service for the purchase and delivery of three ADA-compliant concrete double vault toilets to be installed at Trujillo Meadows Campground within the Rio Grande National Forest. The required units must be brown with shake shingle roofs and walls constructed of board and batten, barnwood, or lap with a rock bottom. Key interior features include a plastic toilet riser, a 6-roll toilet paper dispenser, a solar vent fan, and a chain door strap, with no urinals included. The contractor is responsible only for the delivery and placement of the units, as the U.S. Forest Service will handle all site preparation, excavation, and grading. This acquisition is a total set-aside for small businesses under NAICS code 332311. The government intends to award a firm-fixed price contract based on the lowest price technically acceptable criteria, requiring that the offeror provide descriptive literature to prove the product meets all salient characteristics and maintains clear traceability to the original equipment manufacturer. All deliverables must be provided F.O.B. Destination within 180 days after receipt of order. Quotations are evaluated sequentially by price, followed by a technical and past performance review to ensure the contractor is capable of meeting the quality and timeliness requirements of the project.

Rio Grande National Forest

POSTED

DEADLINE

in about 13 hours

Modular Container Office Fabrication & ConversionThis subcontract involves the fabrication and conversion of a 40-foot high-cube cargo container into a functional office space for prime contractors working on Texas Animal Health Commission projects. The scope of work includes installing interior walls according to specific floor plans, applying durable tan or white exterior coatings, and fitting the unit with marine-grade plywood flooring and wear-resistant liners. The final product must be specifically designed to withstand the environmental conditions of the coastal plains in south Texas. The project requires the delivery of one fully assembled and tested container office. Interested parties should note that the response deadline is October 22, 2026, and the work falls under NAICS code 332311.

Texas Animal Health Commission

POSTED

DEADLINE

Cargo Container Office

Solicitation # 554-27-001

The Texas Animal Health Commission is soliciting bids for a 40-foot high-cube cargo container office designed for use in the coastal plains of south Texas. The required unit must feature a tan or white exterior and an interior with a minimum R-10 insulation value, marine-grade plywood flooring with wear-resistant coating, and professional wall and ceiling finishing. Key interior requirements include a bathroom equipped with a toilet, vanity, sink, and lockable door. Due to existing plumbing and electrical hookups, the layout of the bathroom, electrical panel, and entry door must strictly adhere to the provided reference floor plans. The HVAC system must prioritize robust cooling capabilities to withstand extreme southern Texas coastal heat. This procurement is conducted as an Invitation for Bids (IFB) with a response deadline of October 22, 2026, at 2:00 PM CST. Bidders must submit one original signed copy of the bid in a sealed envelope to the Purchasing Department in Austin, Texas; electronic or fax submissions will be rejected. A complete response requires the Information and Certifications Form, vendor contact details, tax identification, an estimated delivery date, and a per-unit and total price quote. Failure to complete the certifications form will result in disqualification. Payment will be issued within 30 days of satisfactory delivery in accordance with the Texas Prompt Payment Act.

Texas Animal Health Commission

POSTED

DEADLINE

Baseball Fencing Material SupplyThis subcontract for Baseball Fencing Material Supply involves the procurement and delivery of industrial grade fencing fabric, galvanized posts, and hardware for prime contractors working on Greenwood County Parks and Recreation projects at the Wilbanks Sports Complex. The supplier is responsible for ensuring all materials meet minimum RFP standards and must provide descriptive documentation for any equal substitutions at least 10 days before the proposal opening. The contract is managed by the South Carolina Parks and Recreation agency under NAICS code 332311. Interested parties must submit their responses by the deadline of November 12, 2026, to provide the specified materials directly to the project site.

Parks and Recreation

POSTED

DEADLINE

in about 1 month

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

Same awarding agency

Supply of Nonmetallic Tubing (Parker-Hannifin P/N 201-0400100-NT-25)This subcontract involves the supply of 60 feet of nonmetallic tubing for prime contractors supporting the Department of Defense, specifically the DLA Weapons Support Fluid Handling Division. The required tubing must match Parker-Hannifin part number 201-0400100-NT-25 in accordance with TDP Rev A Gen 1 specifications. The contractor is responsible for strict adherence to military and federal standards, including packaging and marking per MIL-STD-2073-1E and MIL-STD-129, palletization per RP001, and hazardous material labeling per 29 CFR 1910.1200. The opportunity was posted on October 6, 2026, with a response deadline of October 19, 2026, falling under NAICS code 326122.

Plastics Pipe and Pipe Fitting Manufacturing

POSTED

about 18 hours ago

DEADLINE

Supply of Nonmetallic Tubing (P/N HM-37)This subcontract involves the supply of one unit of nonmetallic tubing, specifically Part Number HM-37 (NSN 4720014660139), for prime contractors delivering to the Department of Defense DLA Weapons Support Fluid Handling Division. The contractor is responsible for manufacturing or procuring the item from Rentfrom, Incorporated, ensuring that all units are packaged according to ASTM D3951, labeled per MIL-STD-129, and palletized in accordance with RP001. The project falls under NAICS code 326220 and specifies Belle Chasse, Louisiana, as the place of performance. The solicitation was posted on October 6, 2026, with a response deadline of October 19, 2026.

Rubber and Plastics Hoses and Belting Manufacturing

POSTED

about 18 hours ago

DEADLINE

Non-Metallic Hose Assembly Supplier (NSN 4720012466315)This subcontract opportunity is for the supply of one non-metallic hose assembly to support prime contractors on DLA Weapons Support projects. The selected supplier is responsible for manufacturing or sourcing the assembly to strictly adhere to NSN 4720012466315 specifications, with packaging requirements following ASTM D3951 and the DLA Master List of Technical and Quality Requirements. Eligible bidders must possess a valid CAGE code and active SAM registration. The contract requires the delivery of the unit within 20 days of the order. This requirement is managed by the Department of Defense under the DLA Weapons Support Fluid Handling Division, with the place of performance located in South Bend, Indiana.

All Other Miscellaneous Manufacturing

POSTED

about 18 hours ago

DEADLINE

Supply of Air Breathing Hose (NSN 4720-00-030-6809)This subcontract involves the manufacture or procurement of 2,000 air breathing hoses, identified by NSN 4720-00-030-6809, for the DLA Weapons Support Fluid Handling Division. All units must strictly adhere to the specifications outlined in MIL-PRF-26385F, Paragraph 4.2. As part of the quality assurance process, the contractor is required to provide two 12-inch length samples specifically for destructive testing. The contract mandates full compliance with DFARS 252.204-7012 and all applicable regulations regarding prohibited telecommunications equipment. Performance will take place in Tracy, California, under NAICS code 339999. The final delivery consists of the 2,000 completed hoses along with the required test samples.

All Other Miscellaneous Manufacturing

POSTED

about 18 hours ago

DEADLINE

Supply of Tube Unions (NSN 4730017065718)This subcontract involves the procurement or manufacture of tube unions to support prime contractors working on DLA Weapons Support fluid handling projects. The contractor is required to provide 10 units that strictly adhere to NSN 4730017065718 and the DLA Master List of Technical and Quality Requirements. The completed hardware must be delivered to the Naval Air Systems Command Central Kitting Activity located in Orange Park, Florida. This effort is managed under the Department of Defense through the DLA Weapons Support Fluid Handling Division, with a response deadline set for October 19, 2026.

Fluid Power Pump and Motor Manufacturing

POSTED

about 18 hours ago

DEADLINE

Supply of Elbow, Tube to Hose (NSN 4730016868787)This subcontract involves the procurement and delivery of ten tube-to-hose elbow components, specifically Parker-Hannifin part number 1J743–8–6 with NSN 4730016868787. These components are intended for prime contractors serving the Department of Defense under the DLA Weapons Support Fluid Handling Division. The contractor must ensure all units are delivered in strict accordance with RP001 DLA Packaging Requirements and RQ017 Physical Identification and Bare Item Marking standards. The solicitation was posted on October 6, 2026, with a response deadline of October 19, 2026, falling under NAICS code 423840.

Industrial Supplies Merchant Wholesalers

POSTED

about 18 hours ago

DEADLINE

Supply of Straight Pipe-to-Tube Adapters (NSN 4730-01-451-8703)This subcontract involves the manufacture or sourcing of 473 straight pipe-to-tube adapters under NSN 4730014518703 for prime contractors supporting the Department of Defense DLA Weapons Support Fluid Handling Division. Because these components are designated as Critical Application Items, the provider must strictly adhere to Type I Code Y shelf-life requirements, ensuring a minimum shelf life of 180 months. The project falls under NAICS code 332996 and will be performed in Albany. Interested parties must respond by October 19, 2026, to meet the requirements of the solicitation posted on October 6, 2026.

Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 18 hours ago

DEADLINE

Specialized Waterproof/UV-Protective Packaging ServicesThis subcontract for the Department of Defense, specifically the DLA Weapons Support Fluid Handling Division, involves providing specialized packaging and palletization services for prime contractors. The scope of work requires sealing items in medium duty, waterproof, greaseproof, and opaque bags to protect against moisture and UV deterioration. All activities must be executed in strict accordance with MIL-STD-2073-1E for packaging, and RP001 and MIL-STD-129 for palletization, ensuring shipments are fully marked and ready for FOB Origin delivery. The project is categorized under NAICS code 488510 and will be performed in Tracy, California. Interested parties should note the response deadline of October 19, 2026. The primary objective is to deliver high-standard protective packaging that meets rigorous military specifications to maintain the integrity of weapons support materials.

Freight Transportation Arrangement

POSTED

about 18 hours ago

DEADLINE

Supply of Plain Encased Seals (NSN 5330002911629)This subcontract involves the manufacture or procurement of 572 plain encased seals, identified by NSN 5330002911629, for prime contractors supporting the DLA Weapons Support Fluid Handling Division. The project requires strict adherence to Special Marking Code 20 to ensure items are not bent, and all shipments must comply with MIL-STD-129 marking standards and 29 CFR 1910.1200 hazard communication regulations. The contract is managed under NAICS code 326199 for the Department of Defense, with the place of performance located in Tracy, California. Interested parties must respond by October 19, 2026, to fulfill the delivery requirements for these specific components.

All Other Plastics Product Manufacturing

POSTED

about 18 hours ago

DEADLINE

Supply of Preformed Hoses (NSN 4720015009898)This subcontract involves the supply of nine specialized preformed hoses for the Department of Defense under the DLA Weapons Support Fluid Handling Division. The required components must meet NSN 4720015009898 and adhere to Critical Application Item standards for fluid handling. Approved manufacturers include Safran, Hydraflow, and Boeing, with specific part numbers mandated for compliance. The project is categorized under NAICS code 339113 and will be performed in Orange Park, Florida. Interested parties must submit their responses by October 19, 2026, to fulfill the requirements of the prime contractors managing these fluid handling projects.

Surgical Appliance and Supplies Manufacturing

POSTED

about 18 hours ago

DEADLINE

Supply of Metal Tube Assembly (NSN 4710-01-721-2717)This subcontract involves the manufacture or procurement of one Metal Tube Assembly under NSN 4710-01-721-2717 for the Department of Defense, specifically supporting the DLA Weapons Support Fluid Handling Division. The selected provider must ensure the assembly meets all technical specifications, adheres to the DLA Master List of Technical and Quality Requirements, and follows RP001 packaging standards. The project is categorized under NAICS code 332721, with the place of performance located at McConnell AFB. Interested parties must submit their responses by October 19, 2026, to fulfill the delivery of the completed and packaged assembly.

Precision Turned Product Manufacturing

POSTED

about 18 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS