Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

TUBE, SUCTION, SURGICAL

Active
SPE2DS-26-T-304LFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for a 72-inch clear plastic surgical suction tube, supplied in packages of fifty units, with a mandatory shelf life of sixty months that cannot be extended. No more than nine months may have passed between the manufacturer’s production date and the delivery date to the government. The item must comply with Medical Marking Standard No. 1, replacing all prior references to MIL-STD-129, and bidders must clearly state the source and part number being offered. Packaging must meet DLA packaging requirements, and any non-accepted supplies must have all government identification removed prior to return. The item is identified by NSN 6515-01-389-6158 with a single purchase request for one package, and delivery is required within ten days of award. The solicitation, issued under SPE2DS-26-T-304L, was posted on August 3, 2026, with responses due by August 10, 2026, and falls under NAICS code 339112 managed by the Department of Defense’s Medical Supply Chain division. Technical and quality requirements are governed by the DLA Master List, and the applicable revision is determined by the solicitation issue or award date. Point of contact for inquiries is Vernon Stevenson, reachable via email or phone.

General Info

72-inch clear suction tube, 50 units per package, 60-month shelf life, delivery in 10 days, NSN 6515-01-389-6158

Agency

Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSFView Agency

NAICS

339112 - Surgical and Medical Instrument ManufacturingView NAICS

Place of Performance

US

Set-Aside

NONE

Documents

(1)

SPE2DS-26-T-304L.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF
View Agency Profile
Office AddressUS
Contacts
Vernon Stevenson
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
TUBE,SUCTION,SURGICAL
TUBE,SUCTION,SURGICAL
72 IN. LONG CLEAR PLASTIC TUBING;
.
UNIT OF ISSUE PACKAGE OF 50 EACH
RS023: Shelf-life requirement RS001 for a TYPE I (CODE S) item with a shelf life of 60 months (non-extendable) applies to this item.
SHALL HAVE A SHELF LIFE OF 60 MONTHS. NOT MORE THAN 9 MONTHS SHALL HAVE ELAPSED FROM DATE OF MANUFACTURER TO DATE OF DELIVERY TO THE GOVERNMENT.
. ,, RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
.
MATERIAL MUST BE MARKED IAW MEDICAL MARKING
STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES
TO MIL-STD-129.
COPIES OF MEDICAL MARKING STANDARD NO. 1
(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA
TROOP SUPPORT VIA EMAIL TO fssb@dla.mil. MMS NO. 1 IS ALSO AVAILABLE ONLINE AT: https://www.dla.mil/Logistics-Operations/Packaging/ . BIDDER: PLEASE SPECIFY SOURCE AND PART NUMBER BEING SUPPLIED.
ADEQUATE DATA FOR THE NSN/Part Number: 6515-01-389-6158 Quantity: 1 PG Purchase Request: 7017715275QTY: 1 Delivery: 10 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 339112
New
DIBBS
INTRAOSSEOUS INFUSION
Solicitation # SPE2DS-26-T-305E
The intravenous infusion system is a specialized medical device designed for rapid fluid resuscitation in pre-hospital and hospital emergency settings, particularly for treating hemorrhagic shock. The system consists of a clear plastic infusion tube with a stainless steel bone portal tip and Luer connector, an introducer, a strain-relief patch, and a clear plastic protector dome, all packaged as a single sterile unit. Each unit is intended for one-time use and must be shipped in sealed containers that safeguard integrity during transport. The product is supplied in packages of ten units, with a required shelf life of eighteen months, and no more than three months may have passed between the manufacturer’s date and delivery to the government. All packaging and labeling must comply with Medical Marking Standard No. 1, superseding MIL-STD-129, and must include the manufacturer date, expiration or retest date, contract number, and lot number. The device is subject to the DLA Master List of Technical and Quality Requirements, identified by RA001, and must adhere to DLA packaging specifications under RP001 and the removal of government identification from non-accepted supplies per RQ011. The NSN is 6515-01-530-6147, with a single package ordered under purchase request 7017715270, and delivery is required within twenty days of award under solicitation SPE2DS-26-T-305E, with performance directed to Fort Bragg, North Carolina.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 17 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339112
New
DIBBS
SAMPLING KIT, ARTERIAL
Solicitation # SPE2DS-26-T-302K
The contract specifies the procurement of 4 packages of 100 arterial blood gas sampling kits, each containing a 3 mL sterile syringe with a 23-gauge by 1-inch needle, prefilled with dry lithium heparin and equipped with a filter tip and protective cap. Each kit includes additional components such as a 2x2 inch alcohol prep pad, gauze, a patient label, a biohazard-labeled ice bag, a bandage, and a dry ice bag for temperature-controlled transport. All units must be commercial packaged in sealed containers designed to prevent damage or breakage, and shipped in exterior containers compliant with commercial standards to ensure safe, cost-effective delivery to the specified military address in APO, 96260-5479. Packaging and labeling must adhere strictly to Medical Marking Standard No. 1, replacing all references to MIL-STD-129, and each item must be clearly marked accordingly. The kits have a fixed 36-month shelf life with no extensions permitted, and compliance with the DLA Master List of Technical and Quality Requirements is mandatory. Bidders must provide the exact source and part number being offered, and all supplies must meet the specifications outlined in the solicitation, with delivery required within 84 days of award. The acquisition is under Federal procurement rules, administered by the Department of Defense through the Medical Supply Chain, and bid responses are due by August 10, 2026.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 17 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339112
New
DIBBS
CATHETER, URETHRAL
Solicitation # SPE2DS-26-T-304C
This contract specifies the procurement of a disposable, siliconized rubber, Foley-type urethral catheter with a 5 mL balloon and 3-way valve, sized at 18 FR, supplied in sterile conditions in boxes of twelve. The item is regulated by the FDA and must comply with stringent medical and defense logistics standards, including packaging and marking requirements defined by Medical Marking Standard No. 1, which supersedes MIL-STD-129. The catheter has a non-extendable shelf life of 60 months and must be furnished with a clearly specified source and part number, with Cardinal Health 200, LLC and C. R. Bard, Inc. listed as approved manufacturers. Packaging must adhere to commercial standards and MIL-STD-2073-1E for protection during transit, with palletization and marking conforming to DLA requirements. The item is designated for delivery FOB destination, with zero tolerance for quantity variance, and must be inspected and accepted at the delivery point. The delivery deadline is August 5, 2026, with a required 20-day lead time from order placement. No mercury or mercury-containing compounds may be used in the product except for specific, exempted applications under strict containment guidelines. All shipments must be addressed to the designated APO and Ramstein, Germany locations, and transportation logistics are governed by DLA procedural notes. The solicitation is issued under DoD procurement authority with an NSN of 6515-00-104-8695 and is managed through the Defense Logistics Agency.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 17 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339112
New
DIBBS
MANIFOLD ASSEMBLY, ASPI
Solicitation # SPE2DS-26-T-275R
The contract pertains to the procurement of two units of a Manifold Assembly, Aspirator, identified by National Stock Number 6515-01-699-5453, with a total contract value of $516.60 at $258.30 per unit. Delivery is required within 20 days after the date of order, with FOB Destination terms and delivery to Scott AFB, 62225-5219. Packaging and marking must adhere strictly to commercial standards and the Medical Marking Standard No. 1, which supersedes MIL-STD-129 for all medical acquisitions; each unit must be sealed in a protective container and shipped in commercial exterior packaging suitable for safe carrier delivery at the lowest rate. Preservation and packaging must comply with MIL-STD-2073-1E, using standardized codes for QUP, packaging, and preservation methods, though specific preservation materials are not detailed. The contractor must submit Safety Data Sheets in accordance with Federal Standard No. 313 and OSHA’s Hazard Communication Standard, ensuring appropriate labeling of hazardous materials. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, and must be met at the time of solicitation issuance. The contract mandates use of the Wide Area WorkFlow system for all invoicing and receiving reports, and includes clauses covering cybersecurity, controlled information safeguarding, trafficking in persons, employment eligibility verification, sustainable products, and whistleblower protections, with several deviations authorized for alternate language. The contractor must provide their Unique Entity ID and CAGE code, and represent their size status, with additional disclosures required if claiming small business or socioeconomic classifications. There is no formal section listing attachments, and while some documents like MMS No. 1 are referenced, no formal attachments are provided. Inspection and acceptance will occur at the destination, with the Government responsible for final evaluation. The solicitation is competitive and issued through the DLA Internet Bid Board System, with responses due by August 3, 2026, and no option quantities or extended performance periods are included.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 17 hours ago

DEADLINE

in 2 days
View Details
NAICS: 339112
New
DIBBS
DRAINAGE UNIT, PLEURAL
Solicitation # SPE2DS-26-T-304F
The contract specifies the procurement of 44 cases of a mobile chest drain system designed for pleural cavity drainage, each unit featuring a 500ml collection capacity, a one-way valve, simple air leak detection, and compatibility with both suction and gravity drainage. The device is compact and lightweight, intended for clinical use in medical settings. All units must be delivered within 20 days of award and must have been manufactured no more than five months prior to delivery. Each unit must be properly sealed in a commercial container that prevents damage, and shipped in exterior packaging suitable for safe transport via common carrier at the lowest rate to the designated delivery point at Hurlburt Field, Florida. All packaging and marking must comply with Medical Marking Standard No. 1, replacing all prior references to MIL-STD-129, and each label must clearly display the date of manufacture, expiration or retest date, contract number, and lot number. The contract is a total small business set-aside under NAICS code 339112, with technical and quality requirements governed by the DLA Master List of Technical and Quality Requirements, and bidders are required to provide the source and part number for the supplied item, identified by NSN 6515-01-525-4904.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 17 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339112
New
DIBBS
SPHYGMOMANOMETER
Solicitation # SPE2DS-26-T-300Q
An aneroid sphygmomanometer designed for pediatric use, this device features a two-tube cuff with a blue nylon material and hook-and-loop closure, calibrated for accurate blood pressure measurements up to 300 mmHg. It includes an inflation bulb with tubing and a check valve, a no-pin-stop manometer with integrated tubing, and a carrying case for portability. The cuff is clearly marked with artery labels and index range markings to facilitate proper placement and readings. The manometer is backed by a ten-year calibration warranty, ensuring long-term accuracy and reliability. The unit is supplied as a complete assembly, with each item considered a single unit of issue. This contract requires the delivery of eight units under NSN 6515-01-311-0419, with a purchase request number 7017723157 and a delivery requirement of 84 days after order award. The solicitation number is SPE2DS-26-T-300Q, issued by the Department of Defense’s Medical Supply Chain MD Surg FSF, with performance taking place in APO 96260-5479. Bidders must provide the source and part number for the supplied item. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, and packaging must comply with DLA standards. The government mandates removal of its identification from any non-accepted supplies. The solicitation closed on August 10, 2026, after being posted on August 3, 2026, under NAICS code 339112 for medical device manufacturing.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 17 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339112
New
DIBBS
CATHETER, URETHRAL
Solicitation # SPE2DS-26-T-304U
This contract specifies the procurement of a disposable 16 French Foley urethral catheter made of siliconized rubber with a round tip and a 5 mL balloon, supplied in boxes of 12 units. The item is regulated by the FDA and must comply with stringent medical quality and packaging standards, including the Medical Marking Standard No. 1, which supersedes MIL-STD-129. The catheter has a 60-month non-extendable shelf life and must be packaged in commercial-style sealed unit containers capable of preventing damage, with exterior shipping containers ensuring safe, cost-effective delivery to the specified destination. Packaging and labeling must conform to ASTM D3951 and the DLA Master List of Technical and Quality Requirements, which take precedence. The item is identified by NSN 6515-00-104-8694 and must be supplied with the exact part number 0165L16 from approved manufacturers including C. R. Bard, Baxter Healthcare Corp, and Cardinal Health. Delivery is required FOB destination within 20 days, with no variance allowed in quantity, and inspection and acceptance occur upon delivery. The product is subject to Defense Information protection, and bidders must disclose source and part number. Shipping must be traceable and cannot use parcel post. The contract has a response deadline of August 10, 2026, with the original required delivery date set for August 5, 2026.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 17 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339112
New
DIBBS
BAG, COLLECTION, DRAI
Solicitation # SPE2DS-26-T-304N
The contract pertains to the procurement of CSF drainage bags designed for use with external drainage systems, specifically compatible with NSN 6515-01-523-8458 for systems incorporating an EVD catheter and NSN 6515-01-523-8459 for systems without an EVD catheter. Each unit is packaged in a sealed container to prevent damage or breakage, with five units per package designated as the unit of issue. All packaging must adhere to commercial standards as outlined in the procurement document and comply with Medical Marking Standard No. 1, which supersedes MIL-STD-129, ensuring proper identification and traceability. Shipments must utilize suitable exterior containers that guarantee safe delivery via common carriers at the lowest possible rate to the specified delivery point, with export packaging required when necessary. The supplies are subject to Defense Logistics Agency packaging and technical requirements referenced in DLA’s Master List, and all markings must conform strictly to MMS No. 1. The contract, issued under solicitation SPE2DS-26-T-304N by the Department of Defense’s Medical Supply Chain, calls for a single package to be delivered within 20 days of award to APO 09094-3219, with technical and quality specifications governed by the version of the DLA Master List in effect at the time of solicitation.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 17 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339112
New
DIBBS
NEEDLE SET, INTRAOSS
Solicitation # SPE2DS-26-T-301Q
The contract specifies the procurement of pediatric intraosseous needle sets designed for use with the EZ-IO battery-powered driver, intended for patients weighing between 3 and 39 kg. Each unit includes five sterile 15-gauge needles, each 15mm in length, constructed from 304 stainless steel and free of latex, along with five EZ-Connect connectors and five wrist bands for securement. The unit of issue is PG/5each, with a total order quantity of two packs. The materials must comply with Medical Marking Standard No. 1, superseding MIL-STD-129, and proper packaging is required to ensure protection from damage during transit, with commercial exterior containers suitable for safe delivery by common carriers at the lowest feasible rate. All supplies must be marked in accordance with DLA standards, and the vendor must provide the source and part number for each item supplied, tied to the NSN 6515-01-537-9013. Technical and quality requirements referenced in the DLA Master List apply, and the contract is subject to DLA packaging and defense information protocols. Delivery is required within 20 days of award, with performance specified at Charleston AFB, and the solicitation was issued under contract number SPE2DS-26-T-301Q with a bid deadline of August 10, 2026.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 339112
New
DIBBS
TUBING, ANESTHESIA
Solicitation # SPE2DS-26-T-301G
The contract specifies the procurement of anesthesia tubing, 22mm by 36 inches, in boxes of ten units, with a total quantity of two boxes required. The item is identified by NSN 6515-01-667-6524 and is intended for medical use under the Department of Defense’s Medical Supply Chain. Packaging must comply with Commercial standards as outlined in the procurement documentation, requiring each unit to be sealed in a protective container to prevent damage, with exterior shipping containers suitable for safe transport by common carriers at the lowest cost to the delivery point at Camp Lejeune, NC. All items must be labeled in accordance with Medical Marking Standard No. 1, which replaces MIL-STD-129, and instructions for obtaining this standard are provided through DLA Troop Support. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. Delivery is due within 20 days of award, and the solicitation was issued under contract number SPE2DS-26-T-301G with a response deadline of August 10, 2026. The contract is managed by Patrick Esposito of the Department of Defense, and the NAICS code for the procurement is 339112.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 339112
New
DIBBS
AIRWAY, SUPRAGLOTTIC
Solicitation # SPE2DS-26-T-302G
The airway device is a disposable supraglottic airway designed as a simple-to-use alternative for patient ventilation, featuring a dedicated channel that allows passage of a gastric tube and a straightened, beveled distal tip to facilitate proper placement posterior to the larynx and into the upper esophagus. Each unit includes a 60cc syringe and lubrication, is sized as size 5 with a purple tip, and measures 1.02 feet by 0.48 feet by 0.15 feet. The product must have a shelf life of 36 months, with no more than five months elapsed between the manufacturer’s production date and delivery to the government. Labeling must comply with the latest revision of MMS1A and include the manufacturer date, expiration or retest date, and contract and lot numbers. All packaging and marking must adhere to the Medical Marking Standard No. 1 and DLA packaging requirements, with government identification removed from non-accepted supplies. The item is identified by NSN 6515-01-699-9685, with a quantity of 20 units required under solicitation SPE2DS-26-T-302G, issued on August 3, 2026, and due for response by August 10, 2026. Delivery is expected within 20 days after order award to Fort Hood, Texas, with technical and quality specifications governed by the DLA Master List of Technical and Quality Requirements incorporated by reference. Bidders must provide the source and part number for the product being offered.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 17 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339112
New
DIBBS
PIN, BONE
Solicitation # SPE2DS-26-T-302L
The item is a stainless steel bone pin, diamond-point, double-ended, with a 0.125 inch diameter and a 9 inch round shank, furnished in packages of six each, with the unit of issue designated as one package (PG). The manufacturer is Smith & Nephew Inc, with part number 12-8111, and the NSN is 6515-01-262-4566. All packaging must comply with Medical Marking Standard No. 1, superseding MIL-STD-129, and each container must be labeled with the NSN, manufacturer and CAGE code, manufacture date, expiration or retest date, and contract or lot number, with the lot number and MFD prefix clearly marked on all containers. Packaging must be commercial-grade, sealed, and designed to prevent damage or breakage, with outer shipping containers suitable for safe delivery via common carrier at the lowest rate to the specified destination, which is APO 96260-5479. The contract requires strict adherence to DLA packaging and marking requirements under RP001 and RA001, and the item is subject to FDA regulation, necessitating a referral to the product specialist via EBS prior to award. Delivery is due in 84 days FOB destination, with no tolerance for quantity variance, and inspection and acceptance occur at the point of delivery. The contract number is SPE2DS-26-T-302L, with a response deadline of August 10, 2026, and the solicitation is administered by the Department of Defense’s Medical Supply Chain under the NAICS code 339112.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 17 hours ago

DEADLINE

in 6 days
View Details

More opportunities from Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

Same awarding agency

NAICS: 456199
New
DIBBS
SPONGE, SURGICAL
Solicitation # SPE2DS-26-T-281T
The product is a pediatric surgical sponge measuring 24 inches by 38 inches, designed for use on partial to full thickness wounds and first to second degree burns. It is a multi-layered, sterile, non-permeable dressing with a high-density polyethylene outer and wound contact layer, an anti-shear layer of the same material, and inner layers composed of a highly absorbent rayon and cellulose blend. The dressing is engineered to wick exudate away from the wound site throughout the entire padding, thereby reducing the frequency of dressing changes and minimizing the risk of tissue maceration and irritation. Each case contains 24 units, sold as a box of 24, and is labeled to meet strict government specifications. The item has a fixed 36-month shelf life with no extension permitted, and delivery to the government must occur within five months of the manufacturer’s date. Labeling must include the manufacturer date, expiration or retest date, contract number, and lot number in compliance with MMS1A standards. The product falls under NSN 6510-01-630-8705, with a procurement quantity of two boxes and a delivery deadline of 20 days after award. Packaging must comply with DLA requirements, and all supplies must be free of government identification prior to delivery. The solicitation, issued under SPE2DS-26-T-281T, is governed by DLA’s Master List of Technical and Quality Requirements, and the point of contact is Mary-Kathryn Donahue of the Department of Defense’s Medical Supply Chain.
All Other Health and Personal Care Retailers

POSTED

about 17 hours ago

DEADLINE

in 2 days
View Details
NAICS: 621410
New
DIBBS
TEST STRIPS, SANITIZING
Solicitation # SPE2DS-26-T-301P
The contract solicitation SPE2DS-26-T-301P seeks the procurement of test strips for sanitizing applications, specifically impregnated paper strips designed to measure quaternary ammonium compound (QAC) concentrations in dishwashing rinse water within a range of 50 to 400 ppm. The item is identified by NSN 6550-01-452-1775 and is to be delivered in vials containing 100 strips each, accompanied by waterproof plastic packaging, instructions, and a color chart for accurate measurement. The delivery is required within five days after order placement, with the specified destination being Offutt Air Force Base, Nebraska, under FOB Destination terms. Packaging and labeling must strictly conform to MIL-STD-2073-1E and the Medical Marking Standard No. 1 (MMS No. 1), which supersedes MIL-STD-129 for all medical acquisitions and mandates barcode labeling with item identification, lot number, expiration date, and shipping data. The solicitation is issued by the Defense Logistics Agency Troop Support under the Department of Defense and is governed by a suite of Federal Acquisition Regulation (FAR) and Defense Federal Acquisition Regulation Supplement (DFARS) clauses. The contract type remains unspecified but includes Alternate I of FAR 52.216-1, indicating a potential fixed-price arrangement. Mandatory requirements include compliance with hazardous material labeling per 252.223-7001, submission of Material Safety Data Sheets (MSDS) prior to award, and adherence to cybersecurity standards including DFARS 252.204-7012 and NIST SP 800-171 assessments. Offerors must hold a Unique Entity ID, provide socioeconomic representations as applicable, and comply with employment verification, anti-trafficking, and small business subcontracting payment acceleration requirements. Electronic submission is required via the DIBBS portal with performance documentation and invoicing conducted through WAWF. Inspection and acceptance occur at the delivery point by the government, and all deliveries must be tracked and labeled for full supply chain traceability in accordance with medical acquisition protocols.
Family Planning Centers

POSTED

about 17 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
MASK, OXYGEN
Solicitation # SPE2DS-26-T-302S
The contract specifies the procurement of two oxygen masks designed for large canine use, each measuring 4.5 inches by 4.5 inches, with the unit of issue being each. The masks must comply with strict packaging and marking standards, including commercial packaging in sealed containers that protect against damage and shipping in exterior containers suitable for safe transport via common carrier at the lowest cost to the designated delivery point at Hurlburt Field, Florida. All items must be labeled in accordance with Medical Marking Standard No. 1, which supersedes MIL-STD-129, and bidders are required to provide the source and part number being offered. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation or award date depending on acquisition size. The contract is subject to DLA packaging requirements and includes provisions for the removal of government identification from non-accepted supplies. The solicitation number is SPE2DS-26-T-302S, with a response deadline of August 10, 2026, and delivery expected within 20 days after award, under a federal procurement by the Department of Defense’s Medical Supply Chain.
Surgical Appliance and Supplies Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
BANDAGE, ADHESIVE
Solicitation # SPE2DS-26-T-302E
The contract is for the procurement of sterile adhesive bandages measuring 0.750 inches by 3 inches, packaged 30 per package, with a flesh/clear color and affixed to a plastic adhesive backing. The total quantity ordered is three packages, with a delivery requirement of 20 days after the order date to the U.S. Naval Hospital Okinawa in Japan. Each package must maintain a minimum 36-month shelf life, with no more than five months elapsed between the manufacturer’s date and delivery to the government. All labeling and marking must strictly comply with Medical Marking Standard No. 1, which supersedes MIL-STD-129 for medical items, and shelf life dates must be formatted per MMS1A. Packaging must be commercial, using sealed unit containers to preserve sterility and integrity, with outer shipping containers suitable for safe transit via common carrier at the lowest cost. The item is subject to the DLA Master List of Technical and Quality Requirements and must be labeled with the date of manufacture, expiration or retest date, and contract/lot number. Hazardous material labeling, if applicable, must conform to 29 CFR 1910.1200. Inspection and acceptance occur at the destination under FAR 52.246-2, with the government assuming responsibility. The contract implements clauses related to contracting type, equal opportunity, trafficking in persons, employment eligibility verification, and sustainable products, and requires compliance with NIST SP 800-171 for cybersecurity. Payment must be submitted through the Wide Area WorkFlow system, and the offeror must provide a valid Unique Entity Identifier and CAGE code. The solicitation is issued under NAICS 339113, with a potential LPTA award basis, and participation is open to all contractors regardless of socioeconomic status unless specified otherwise. All submissions must be made electronically via DIBBS by the specified response deadline.
Surgical Appliance and Supplies Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
GLOVES, SURGEONS'
Solicitation # SPE2DS-26-T-302X
Surgeons' gloves made of neoprene with a biogel coating and a smooth surface are specified in size 7, color blue, and designed to be hand-specific for optimal fit and function. These disposable gloves are latex-free and powder-free, with sterile packaging and beaded cuffs to enhance secure donning. The gloves feature curved fingers for ergonomic comfort during surgical procedures and include a puncture indication feature to improve safety. Each pair is individually wrapped and packaged in units of 50 pairs per package. A strict shelf-life requirement of 36 months from manufacture applies, with no more than five months allowed to have passed between manufacture and government delivery. Packaging and quality standards align with DLA technical and quality requirements, and all supplies must comply with DLA packaging and identification removal regulations. The item is identified by NSN 6515-01-519-6343, with a single package ordered under purchase request 7017710669. Delivery is required within 20 days after award under solicitation SPE2DS-26-T-302X, issued by the Department of Defense, Medical Supply Chain MD Surg FSF, with performance located in San Diego, California.
Surgical Appliance and Supplies Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
APPLICATOR, DISPOSABLE
Solicitation # SPE2DS-26-T-305D
The contract specifies the procurement of 10 packages of disposable applicators saturated with povidone-iodine, each package containing 50 individually wrapped swab sticks, for a total of 500 units. Each applicator must be sealed in a protective unit container to prevent damage, and all packages must be packed in commercial shipping containers suitable for safe transport via common carrier at the lowest cost to the delivery point in San Antonio, Texas. The product must comply with Medical Marking Standard No. 1, superseding MIL-STD-129, with labeling that includes the manufacturer date, expiration or retest date, contract number, and lot number, all formatted per the latest revision of MMS1A. The shelf life must be a minimum of 15 months, with no more than two months elapsed between the manufacturing date and government delivery. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced under RA001, RP001, and RQ011, with revisions controlled by the solicitation or award date. The NSN is 6515-01-519-2226, the solicitation number is SPE2DS-26-T-305D, bids are due by August 10, 2026, and delivery is required within 20 days after award.
Surgical Appliance and Supplies Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
INTRODUCER KIT, CATH
Solicitation # SPE2DS-26-T-301U
The contract specifies the procurement of an Introducer Sheath Kit designed for use with an ER-REBOA catheter, including a 7FR sheath with a .035 inch short guidewire, an 18G needle, a 30cc syringe, 50ml of 0.9 percent saline, a 5FR clamp, a number 11 stainless steel scalpel, and two inches of 2-0 nylon suture with reverse cutting. The kit is identified by NSN 6515-01-663-2913 with a quantity of 14 kits required for delivery within 84 days of award. Technical and quality requirements referenced in the contract are governed by the DLA Master List of Technical and Quality Requirements, with compliance determined by the revision in effect on either the solicitation issue date or award date depending on the scale of the acquisition. Packaging must adhere to DLA specifications and all non-accepted supplies must be cleared of government identification prior to shipment. Bidders are required to clearly state the source and part number being offered. The solicitation, numbered SPE2DS-26-T-301U, was posted on August 3, 2026, with responses due by August 10, 2026, under NAICS code 339113 for medical device manufacturing, and is managed by the Department of Defense’s Medical Supply Chain under the agency name Medical Supply Chain MD Surg FSF, with performance addressed to APO 09227-0000.
Surgical Appliance and Supplies Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 6 days
View Details
NAICS: 456199
New
DIBBS
INTUBATION KIT
Solicitation # SPE2DS-26-T-302M
The intubation kit is a disposable medical device containing one endotracheal tube with a stylet, one 10 cc syringe, one Velcro tube tie, and one pack of surgical lubricant, offered as a single unit. The kit must have a minimum shelf life of 24 months, with no more than three months elapsed between the date of manufacture and delivery to the government. All packaging must include the NSN, manufacturer name, CAGE code, date of manufacture, expiration or retest date, and the contract or lot number to ensure traceability and compliance. Technical and quality requirements referenced under RA001, RQ011, and RP001 are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issuance or award date depending on acquisition type. The product is identified by NSN 6515-01-632-4831, with a purchase request of 7017710662QTY: 1, and delivery is required within 20 days of award. The solicitation, issued under contract number SPE2DS-26-T-302M, is managed by the Department of Defense through the Medical Supply Chain MD Surg FSF, with performance location at Hurlburht Field, Florida, and primary point of contact James Burke at james.burkejr@dla.mil.
All Other Health and Personal Care Retailers

POSTED

about 17 hours ago

DEADLINE

in 6 days
View Details