Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 30 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Turbine Gearbox Housing Supplier

Active

Federal

Response Deadline10/22/2026, 09:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the supply of turbine gearbox housings for prime contractors supporting US Air Force aircraft engine projects. The selected supplier will manufacture the specific gearbox housing identified by part number 9976M74G04 and NSN 2840-01-187-3185PN, utilizing precision machining and casting of aerospace-grade alloys. The contract requires the delivery of between 3 and 18 units. To ensure aerospace standards, the supplier must maintain compliance with the AS9100 quality management system. This opportunity is managed by the Department of Defense through the DLA Aviation office in Oklahoma City and falls under NAICS code 336413. The response deadline for this requirement is October 22, 2026.

General Info

Supply 3-18 turbine gearbox housings for USAF aircraft by October 22, 2026.

Agency

Department Of Defense → Ok DLA Aviation At Oklahoma CityView Agency

NAICS

336413 - Other Aircraft Parts and Auxiliary Equipment ManufacturingView NAICS

Place of Performance

OK

Set-Aside

NONE

Documents

This scope was carved out of SPRTA1-26-R-0414.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

New Manufactured Material F108 HOUSING,GEARBOX,TUR, NSN: 2840-01-187-3185PN (AMC 3Z)

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedSep 22

subcontract

Response DeadlineOct 22

Submission deadline

Response Deadline

10/22/2026, 09:00:00 PM UTCin 29 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Ok DLA Aviation At Oklahoma City

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Ok DLA Aviation At Oklahoma City

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies turbine gearbox housings for prime contractors on US Air Force aircraft engine projects. Manufactures HOUSING, GEARBOX, TUR per Part Number 9976M74G04 and NSN 2840-01-187-3185PN using precision machining and casting of aerospace-grade alloys. Requires AS9100 quality management system compliance. Delivers 3 to 18 units of the specified gearbox housing.

Similar Contracts

Same NAICS industry code

16--TURRET FLIR UNIT, IN REPAIR/MODIFICATION OF

Solicitation # N0038326RNB10

This presolicitation from Navsup Weapon Systems Support is for the repair or modification of 40 Turret FLIR units under NSN 7R-1680-016715197-YR, with delivery terms set as FOB Origin. Because the items are flight critical and require specific engineering source approval to maintain quality, the government is primarily soliciting previously approved sources who possess the necessary technical data and manufacturing expertise. Prospective bidders who are not currently approved must submit detailed information as outlined in the NAVSUP WSS Source Approval Information Brochures along with their proposals. Failure to provide the required qualification data will result in the offer not being considered for award. The government is not utilizing FAR Part 12 commercial item policies for this requirement, though interested parties may notify the contracting officer of their ability to provide a commercial alternative within 15 days of the notice.

Navsup Weapon Systems Support

POSTED

about 2 hours ago

DEADLINE

in about 1 month

BIFILAR ASSY,AIRCRA

Solicitation # SPRPA126QRC54

This fixed-price solicitation, issued by the Department of Defense via the DLA Aviation office in Philadelphia, is for the procurement of BIFILAR ASSY, AIRCRA under NAICS code 336413. The contract is being processed under Emergency Acquisition Flexibilities and requires the supplier to maintain ISO 9000 or equivalent quality standards. A critical requirement of this award is that all provided spares must be newly manufactured, as refurbished, remanufactured, or repaired materials are strictly prohibited. Eligibility for award is contingent upon Government source approval. Offerors who are not approved sources or distributors who cannot provide an authorized distributor letter on the manufacturer's letterhead will be deemed technically unacceptable. The contract includes a 12-month warranty for non-complex supplies and mandates the use of Wide Area Workflow for combined invoice and receiving reports. Compliance with the Buy American Act and various security prohibitions is required, and the solicitation is subject to priority ratings for national defense and emergency preparedness.

Pa DLA Aviation At Philadelphia

POSTED

about 2 hours ago

DEADLINE

16--LINK ASSEMBLY FORWA

Solicitation # N0038326QNA72

This presolicitation from Navsup Weapon Systems Support is for the procurement of 40 units of a forward link assembly, identified by NSN 1R-1680-014550571-V2 and reference number 901-011-348-101. The delivery terms are FOB Origin. Because the item is flight critical and requires specific engineering source approval to maintain quality, the government is limiting solicitation to previously approved sources who possess the necessary technical data and manufacturing expertise. Prospective bidders who are not currently approved must submit detailed information as outlined in the NAVSUP WSS Source Approval Information Brochures along with their proposals. Failure to provide this documentation or proof of a pending request will result in the offer not being considered for award. The government has determined that FAR Part 12 for commercial items does not apply, though interested parties may notify the contracting officer of a commercial capability within 15 days of the notice. Responses are due by September 25, 2026.

Navsup Weapon Systems Support

POSTED

about 2 hours ago

DEADLINE

in about 1 month

16--ACTUATOR,ELECTROMEC, IN REPAIR/MODIFICATION OF

Solicitation # N0038326QQB39

This solicitation is for the procurement of three electromechanical actuators under NSN 7R-1680-014183151-V2 with delivery terms set as FOB Origin. Because the items are flight critical and require specific engineering source approval to maintain quality, the government is seeking qualified sources with the necessary design capability and manufacturing knowledge. The contract is being pursued under the authority of FAR 6.302-1, indicating an intent to negotiate with a single source, although other responsible parties may submit capability statements or proposals within the specified timeframe. Prospective bidders who are not already approved sources must provide detailed documentation as outlined in the NAVSUP Weapon Systems Support Source Approval Information Brochures to be considered for award. Failure to provide the required source approval data or proof of a pending evaluation will result in the proposal being disqualified. The government maintains the discretion to award based on fleet support needs if the approval process for new sources cannot be completed in time to meet operational requirements.

Navsup Weapon Systems Support

POSTED

about 2 hours ago

DEADLINE

in about 1 month

AERIAL REFUEL CONTR

Solicitation # N0038326QAA99

This contract is a solicitation from the Navsup Weapon Systems Support for the repair and overhaul of specific aviation components, specifically the Aerial Refuel Control and Flap/Slat Electronic units. The contractor, BAE Systems Controls Inc., is responsible for providing all necessary labor, materials, and tooling to return these assets to a Ready For Issue condition. Key performance metrics include a strict Repair Turnaround Time (RTAT) measured from the physical receipt of the asset, with an induction expiration date set for 365 days after the contract award. The agreement outlines detailed procedures for handling assets that are Beyond Economical Repair (BER), Missing on Induction (MOI), or requiring Over and Above Repair (OAR), all of which require written concurrence from DCMA and the Procuring Contracting Officer. The contractor must maintain a quality management system compliant with ISO 9001/SAE AS9100 and adhere to MIL-STD-130 for markings and MIL-STD-2073 for packaging. All work is to be performed at the BAE Systems facility in Fort Wayne, Indiana, with a warranty period of 365 days after delivery.

Navsup Weapon Systems Support

POSTED

about 2 hours ago

DEADLINE

in about 1 month

16--JUNCTION BOX,AIRCRA, IN REPAIR/MODIFICATION OF

Solicitation # N0038326QNA96

This presolicitation from Navsup Weapon Systems Support is for the repair or modification of three aircraft junction boxes under NSN 7R-1680-014949173-LU, with delivery terms set as FOB Origin. Because the item is flight critical and the government does not own the technical data rights, the requirement is restricted to previously approved sources. The government has determined that reverse engineering is uneconomical and that the available technical data is insufficient to support full and open competition. Prospective bidders who are not already approved sources must submit a comprehensive request for source approval along with their proposal, following the guidelines in the NAVSUP WSS Source Approval Information Brochures. Failure to provide the required data or proof of a pending application will result in the offer not being considered for award. This acquisition is not being conducted under FAR Part 12 for commercial items, though interested parties may notify the contracting officer of a commercial alternative within 15 days of the notice.

Navsup Weapon Systems Support

POSTED

about 2 hours ago

DEADLINE

in about 1 month

Manufacture and Supply of Fuselage FirewallsThis subcontract with the Department of Defense ASC Commodities Division involves the manufacture and supply of 33,000 fuselage firewalls under NSN 1560-00-905-4446. The contractor is responsible for fabricating the components to meet specific NSN standards and ensuring all commercial packaging adheres to ASTM D3951. Additionally, any hazardous material packaging must comply with FED-STD-313 and TQ REQUIREMENT IP025. The agreement requires formal certification for the Buy American and Balance of Payments Program. Classified under NAICS code 336413, the contract focuses on delivering the full quantity of completed firewalls to prime contractors supporting aircraft component projects. The solicitation was posted on September 22, 2026, with a response deadline of October 2, 2026.

ASC COMMODITIES DIVISION

POSTED

about 21 hours ago

DEADLINE

Supplier of Remote Control Levers (NSN 1680010796379)This subcontract involves the supply of six remote control levers, identified by NSN 1680010796379, for prime contractors fulfilling DLA supply contracts. The supplier is responsible for manufacturing or procuring parts that match Sikorsky Aircraft Corporation part number 70400-02620-041. All items must be packaged according to ASTM D3951 and the DLA Master List of Technical and Quality Requirements, while strictly adhering to aviation safety standards for Critical Application Items. The contract is managed by the Department of Defense under the ASC Commodities Division, with performance taking place in New Cumberland, Pennsylvania. The opportunity falls under NAICS code 336413, and the response deadline for this requirement is September 30, 2026.

ASC COMMODITIES DIVISION

POSTED

about 21 hours ago

DEADLINE

Supply of Structural Aircraft Plates (NSN 1560-01-733-8598)This subcontract with the Department of Defense involves the supply of four structural aircraft plates meeting the technical specifications for NSN 1560-01-733-8598. The provider is responsible for manufacturing or sourcing these plates using aerospace-grade materials and precision machining to support prime contractors on DLA supply contracts. A critical requirement of the agreement is the maintenance and delivery of a comprehensive supply chain traceability documentation package in accordance with requirement RQ018. Performance for this contract is centered in New Cumberland, Pennsylvania, under NAICS code 336413.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 21 hours ago

DEADLINE

Manufacturing of Attitude Indicator Caging ShaftsThis subcontract involves the manufacture and supply of three precision-machined attitude indicator caging shafts for the Department of Defense, specifically the ASC Supplier Oper AE and AF Division. The shafts must be fabricated according to NSN 6610-00-530-3543 specifications using CNC machining to meet strict aerospace tolerances. Performance will take place at Hill AFB, and the contractor is required to provide Source Approval Request documentation per RC001. Compliance with DLA Master List RA001 and RP001 packaging requirements is mandatory for all deliveries. The contract falls under NAICS code 336413 and requires the delivery of completed, fully documented components. The response deadline for this solicitation is September 30, 2026.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 21 hours ago

DEADLINE

Collector Assembly (14th Stage) Manufacturing and SupplyThis subcontract through the Department of Defense ASC Supplier Oper OEM Division involves the manufacturing and supply of the 14th Stage Lower 2-Piece Bleed Collector Assembly, identified by NSN 2835-01-498-9682. The contractor is responsible for sourcing or producing the component using precision machining and aerospace-grade alloys to meet the DLA Master List of Technical and Quality Requirements. The performance of this contract is based in San Diego, California, under NAICS code 336413. Interested parties must respond by September 30, 2026, to provide the completed physical assemblies for prime contractors delivering DLA supply contracts.

ASC SUPPLIER OPER OEM DIVISION

POSTED

about 21 hours ago

DEADLINE

Aircraft Component Manufacturer (OEM/Specialty Fabricator)This subcontract involves the manufacture of four aircraft line units under NSN 1560-01-528-0176 for prime contractors supporting DLA supply contracts. The selected manufacturer will utilize aerospace-grade materials and precision fabrication equipment to perform machining, fabrication, and quality testing in accordance with strict technical requirements. All deliverables must comply with ASTM D3951 standards for commercial packaging. The project is managed by the Department of Defense through the ASC Supplier Oper OEM Division, with performance taking place in Cherry Point. The solicitation was posted on September 22, 2026, with a response deadline of September 30, 2026. The work falls under NAICS code 336413 for other aircraft parts and accessory manufacturing.

ASC SUPPLIER OPER OEM DIVISION

POSTED

about 21 hours ago

DEADLINE

More opportunities from Department Of Defense → Ok DLA Aviation At Oklahoma City

Same awarding agency

New Manufactured Material F108 HOUSING,GEARBOX,TUR, NSN: 2840-01-187-3185PN (AMC 3Z)

Solicitation # SPRTA1-26-R-0414

This solicitation, identified as RFP SPRTA1-26-R-0414, is for the procurement of F108 turbine gearbox housings, part number 9976M74G04, which function to house the number 3 bearing and bevel gear. The government intends to acquire between 3 and 18 units with a requested delivery date of February 27, 2034. The solicitation is expected to be issued on September 21, 2026, with a closing date of October 21, 2026. The procurement will be conducted under FAR Part 12 for commercial items, and the government currently intends to limit competition to a small number of sources, noting CFM International as the only known capable source. Interested parties must use electronic procedures for requests and may contact the appointed Ombudsman for concerns during the proposal development phase. The contract is managed by the Department of Defense through the DLA Aviation office at Tinker AFB, Oklahoma.

Aircraft Engine and Engine Parts Manufacturing

POSTED

about 2 hours ago

DEADLINE

New Manufactured Material 5. NSN: 2840-01-262-0495PN (AMC 3Z)

Solicitation # SPRTA1-26-R-0415

This solicitation, identified as SPRTA1-26-R-0415, is for the procurement of combustion chamber cases for F108 engines. The component, identified by NSN 2840-01-262-0495PN and part number 9529M99G09, serves as the structural interface that transmits engine axial load and manages the gas flow path between the compressor and the low-pressure turbine. The government intends to procure between 2 and 8 units with a requested delivery date of December 31, 2028, shipping to location SW3211. The solicitation is expected to be issued on September 21, 2026, with a closing date of October 21, 2026. While the government is seeking potential sources, CFM International is currently identified as the only known source capable of satisfying the requirements. This acquisition will follow FAR Part 12 policies for commercial items and will be conducted via electronic procedures. Interested parties may contact the primary point of contact, Breann Irving, or the appointed Ombudsman for concerns during the proposal development phase.

Aircraft Engine and Engine Parts Manufacturing

POSTED

about 2 hours ago

DEADLINE

New Manufactured Material DISK AND HUB,FAN,AI, NSN 2840-01-187-8164 PN

Solicitation # SPRTA1-26-R-0419

Solicitation SPRTA1-26-R-0419 is a pre-solicitation notice for the procurement of 30 units of Disk and Hub, Fan, AI (NSN 2840-01-187-8164, PN 305-026-618-0) for use in F108 engine booster spools. The estimated solicitation issue date is September 21, 2026, with a closing date of October 21, 2026. Delivery of the materials is requested by December 31, 2027, and shipping is directed to SW3211. The government intends to solicit this requirement under FAR Part 12 for commercial items and may limit competition to a small number of sources per FAR 6.302, as CFM International (CAGE 58828) is currently the only known source capable of meeting the requirements. The procurement is managed by DLA Aviation at Tinker AFB, Oklahoma, with Breann Irving serving as the primary point of contact. An Ombudsman has been appointed to handle contractor concerns during the proposal development phase.

Aircraft Engine and Engine Parts Manufacturing

POSTED

about 2 hours ago

DEADLINE

Manufacturing of Gearbox Cover Assembly (P/N 37R601155P139)

Aircraft Engine and Engine Parts Manufacturing

POSTED

DEADLINE

Aerospace Surface Treatment and Coating ServicesThis subcontract for Aerospace Surface Treatment and Coating Services supports Air Force Sustainment Center F110 platform projects through the Department of Defense. The scope of work involves applying aerospace-grade anodizing, cadmium plating, and anti-corrosion coatings to actuator components using specialized chemical plating baths and anodizing tanks. To ensure compliance with strict tolerances for hydraulic interfaces, the provider must maintain NADCAP certification. The contract, managed by the Oklahoma City DLA Aviation office under NAICS code 332813, requires the delivery of finished and coated actuator components. The response deadline for this opportunity is September 30, 2026.

Electroplating, Plating, Polishing, Anodizing, and Coloring

POSTED

DEADLINE

Aerospace Grade Material and Seal SupplyThis subcontract, titled Aerospace Grade Material and Seal Supply, involves the procurement of raw materials, precision seals, and specialized fasteners for prime contractors manufacturing F110 hydraulic actuators for the Air Force Sustainment Center. The scope includes sourcing aerospace-certified titanium, stainless steel, and high-strength alloys, as well as high-pressure hydraulic seals and O-rings that meet strict military specifications. Managed by the Department of Defense through the Ok DLA Aviation At Oklahoma City, the contract requires adherence to AS9100 quality management standards and the provision of Mill Test Reports for all delivered certified materials and component parts. The opportunity was posted on September 22, 2026, with a response deadline of September 30, 2026, under NAICS code 332710.

POSTED

DEADLINE

Hydraulic Actuator Manufacturing (F110 Platform)This subcontract involves the manufacture of new hydraulic actuators for prime contractors supporting Air Force Sustainment Center F110 platform projects. The scope of work includes the precision machining, assembly, testing, and validation of Part Number 1270M90P03 to ensure compliance with flight-safety standards. Production requires the use of aerospace-grade alloys, high-precision CNC machinery, and specialized hydraulic testing rigs to deliver flight-ready components. The opportunity is managed by the Department of Defense through the DLA Aviation office in Oklahoma City under NAICS code 336412. Eligible providers must possess a valid CAGE code and UEI, and must adhere to Federal Stock Class 3010 requirements. The response deadline for this requirement is September 30, 2026.

Aircraft Engine and Engine Parts Manufacturing

POSTED

DEADLINE

MIL-STD-2073-1 Packaging and Shipping ServicesThis subcontract provides specialized packaging and transportation services for high-value gearbox housings used in US Air Force aerospace projects. The contractor is responsible for ensuring all components are packaged according to MIL-STD-2073-1 and FAR 52.247-53 standards, utilizing moisture-barrier materials and ALSC-certified heat-treated wooden pallets. The agreement is managed by the Department of Defense through the Ok DLA Aviation office in Oklahoma City under NAICS code 488510. Shipping is executed under F.O.B. Origin terms to ensure the secure delivery of properly marked and packaged components to their designated destination.

Freight Transportation Arrangement

POSTED

DEADLINE

ColdSectionModule_End_Item_F100_NSN_2840015806609NZ_PN_4089012-800

Solicitation # SPRTA126R1465

This pre-solicitation under number SPRTA126R1465 is for the procurement of 30 Cold Section Modules, identified by NSN 2840015806609NZ and part numbers 4089012-800 and 2840PL1190333. These components, constructed from nickel alloy and titanium, are designed to supply air to the core module. The contract is managed by the Department of Defense through the DLA Aviation office in Oklahoma City, with a delivery deadline of October 29, 2027, to Tinker AFB, Oklahoma. The solicitation is open to all responsible sources for the submission of capability statements, proposals, or quotations, with a response deadline of November 6, 2026. This requirement falls under NAICS code 336412 and utilizes an electronic procedure for all submissions. The primary point of contact for this acquisition is James Callins.

Aircraft Engine and Engine Parts Manufacturing

POSTED

DEADLINE

in about 1 month

GearboxAssy_End_Item_F100_NSN_2840015493031NZ_PN_4087025-801

Solicitation # SPRTA127R0009

Under solicitation SPRTA127R0009, the Department of Defense is seeking a supplier for three accessory gearboxes, identified by NSN 2840015493031NZ and part numbers 4087025-801 or 2840PL1190365. These components feature outer cases made of AMS 4215 aluminum alloy and provide essential mounting pads for the engine generator, PTO, MOP, and MFP. The contract is managed by the DLA Aviation office in Oklahoma City, with a response deadline of November 7, 2026. The delivery of the three units is scheduled for Tinker AFB, Oklahoma, with staggered deadlines on December 27, 2027, January 27, 2028, and February 27, 2028. This item has not been previously procured, and the solicitation is open to all responsible sources. The primary point of contact for this requirement is James Callins.

Aircraft Engine and Engine Parts Manufacturing

POSTED

DEADLINE

in about 2 months

ShippingAndStorage_End_Item_F100_NSN_8145014512435NZ_PN_P4078842

Solicitation # SPRTA127R2149

This presolicitation, identified by solicitation number SPRTA127R2149, is issued by the Department of Defense through the Ok DLA Aviation At Oklahoma City. The contract seeks the procurement of 30 steel shipping and storage containers designed to house F100-220 and F100-229 inlet fan modules. The items are identified by NSN 8145014512435NZ and part numbers P4078842 and 8145PL0851024. The delivery deadline for the 30 units is on or before July 20, 2031, with the destination set as Tinker AFB, Oklahoma. This is an electronic solicitation open to all responsible sources for the submission of capability statements, proposals, or quotations. The response deadline is November 6, 2026, and the primary point of contact for this requirement is James Callins.

Aircraft Engine and Engine Parts Manufacturing

POSTED

DEADLINE

in about 1 month

HotSectionModule_End_Item_F100_NSN_2840015822797NZ_PN_4089013-800;4089013-801

Solicitation # SPRTA127R0014

This pre-solicitation under solicitation number SPRTA127R0014 is issued by the Department of Defense through the DLA Aviation office in Oklahoma City. The primary requirement is for five titanium hot section module engine core assemblies, identified by NSN 2840015822797NZ and multiple part numbers including 4089013-800 and 4089013-801. These components are designed to compress air from the inlet fan module and are scheduled for delivery to Tinker Air Force Base by February 28, 2027. The contract also includes a line item for CEMS tracking and falls under NAICS code 336412. Interested responsible sources may submit capability statements, proposals, or quotations by the response deadline of November 7, 2026. The primary point of contact for this procurement is James Callins.

Aircraft Engine and Engine Parts Manufacturing

POSTED

DEADLINE

in about 2 months

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS