Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

TURNBUCKLE

Active
SPE7L1-26-T-836TFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for the procurement of 36 turnbuckle assemblies identified by NSN 5340-00-901-3858 under purchase request 7017492903, with a required delivery within 20 days of award. The solicitation, numbered SPE7L1-26-T-836T, was posted on July 15, 2026, and responses are due by July 27, 2026. It is a total small business set-aside under FAR 19.5, classified under NAICS code 332510, and administered by the Department of Defense’s Land Supply Chain. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless an amendment supersedes it. Government identification must be removed from any non-accepted supplies. Performance is designated for Grissom Air Reserve Base, Indiana, with Isabelle Szulewska as the primary point of contact reachable via email and phone. All submissions must be made through the DIBBS portal.

General Info

Procure 36 turnbuckle assemblies, NSN 5340-00-901-3858, deliver in 20 days, small business set-aside, DIBBS submission required.

Agency

Department Of Defense → LAND SUPPLY CHAINView Agency

NAICS

332510 - Hardware ManufacturingView NAICS

Place of Performance

1445 S FORTRESS ST BLDG 209 DOOR 4A, GRISSOM ARB, IN, 46971-1608, US

Set-Aside

SBA

Documents

(1)

RFQ SPE7L1-26-T-836T Request for Quotations

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → LAND SUPPLY CHAIN
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → LAND SUPPLY CHAIN
View Agency Profile
Office AddressUS
Contacts
ISABELLE SZULEWSKI
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
TURNBUCKLE
TURNBUCKLE ASSEMBLY
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
ADEQUATE DATA FOR NSN/Part Number: 5340-00-901-3858 Quantity: 36 EA Purchase Request: 7017492903QTY: 36 Delivery: 20 days ADO

Similar Contracts

NAICS: 332510
New
DIBBS
BRACKET, MOUNTINGThe contract pertains to the procurement of one mounting bracket, identified by NSN 5340016453031 and part number LS1091648, under solicitation SPE7L4-26-T-5646. Delivery is required within 20 days FOB origin with no variance allowed in quantity, and inspection and acceptance occur at the destination. Packaging must comply with DLA’s Master List of Technical and Quality Requirements, and if the item is non-hazardous, it must be commercially packaged per ASTM D3951 unless superseded by a DLA requirement. All packaging and labeling must adhere to MIL-STD-129, and palletization must follow RP001 DLA Packaging Requirements. The item must be shipped via the fastest traceable means, excluding parcel post, to the designated delivery point at Fort Hood, Texas, under shipment reference RDD 777. The contract specifies a required delivery date of July 13, 2026, and includes detailed government use codes, point of contact information, and a link to the DIBBS portal for further solicitation details.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 7 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332510
New
DIBBS
CLAMP, LOOPThis contract pertains to the procurement of 446 units of CLAMP, LOOP under NSN 5340-00-200-7449, with a delivery deadline of 23 days after award, and is procured through a fully competitive solicitation governed by a military or federal specification. Technical and quality requirements are referenced from the DLA Master List of Technical and Quality Requirements, with compliance determined by the revision in effect on the solicitation issue date or award date depending on acquisition size. Packaging must adhere to DLA standards, and all non-accepted supplies must have government identification removed prior to disposal. The contract incorporates provisions related to Covered Defense Information, and full and open competition applies without set-aside restrictions. Sampling follows MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise specified, and attributes are classified as critical, major, or minor with corresponding verification levels or AQLs. Unspecified attributes default to major. The solicitation number is SPE7M4-26-T-263G, posted on July 15, 2026, with responses due by July 27, 2026, and performance is to be delivered to Hill AFB, Utah, 84056-5734, under the oversight of the Department of Defense’s Fluid Handling Division, with Blake Tushar as the primary point of contact.
FLUID HANDLING DIVISION

POSTED

about 7 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332510
New
DIBBS
COVER, ACCESSThis contract specifies the procurement of one unit of a cover and access item with NSN 5342-01-706-2636 under solicitation SPE4A0-26-T-3894, requiring delivery within five days to Camp Pendleton, California, with FOB origin terms and zero variance in quantity. Inspection and acceptance occur at the origin, governed by stringent quality standards referenced from the DLA Master List of Technical and Quality Requirements, which override any conflicting commercial standards. The item must be packaged per ASTM D3951 and labeled in accordance with MIL-STD-129, while palletization follows DLA’s specific packaging directives. Sampling must adhere to MIL-STD-1916 or ASQ H1331 with zero non-conformances allowed unless otherwise stated, and attributes are assigned verification levels or AQLs based on criticality. All packaging and marking must remove government identification from non-accepted items and clearly identify the bare item per RQ017. Documentation for source approval is required, and the unit of issue is one each. The item is designated as a critical application item and must be shipped by the fastest traceable means, explicitly prohibiting parcel post. The delivery must meet the original required date of July 6, 2026, and the contract includes specific freight and parcel post addresses, government use codes, and contact information for the contracting officer.
AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

about 7 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
INSERT, SCREW THREADThe contract requires the supply of 215 screw thread inserts with part number RJ913SB18L and NSN 5325005985588 under solicitation SPE4A6-26-T-06SK, with delivery due in 170 days FOB origin. The item must comply with stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, and all packaging must adhere to MIL-STD-2073-1E and DLA packaging standards, including MIL-STD-129 labeling with no special marking codes. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and critical attributes are verified at strict acceptance levels. The item is designated for Critical Item Source Inspection, and all supplies must be properly marked, palletized, and shipped to the designated DLA distribution facility in New Cumberland, PA, with no quantity variance permitted. The contract enforces configuration change management procedures and prohibits removal of government identification from non-accepted items. The required delivery date is January 10, 2027, with the original required delivery date set for February 11, 2027, and the unit price is $215.00 per EA, totaling $46,225.00. Technical drawings are accessible only during open solicitation via the DIBBS portal, and all provisions are governed by the revision of the DLA Master List in effect at the time of solicitation issuance.
ASC COMMODITIES DIVISION

POSTED

about 7 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
GROMMET, NONMETALLICThis contract is for the procurement of 207 nonmetallic grommets, identified by NSN 5325-00-854-9379 and part number MS53489-122, conforming to technical standards referenced in NASM3036 Revision 3 and MS35489K. The item is classified as a Type I shelf-life item with a strict 36-month non-extendable shelf life, requiring special marking code 32 and compliance with MIL-STD-2073-1E packaging standards. Mercury and mercury compounds are strictly prohibited in all aspects of the product, preservation, packaging, and marking, except for exempted functional uses such as batteries, fluorescent lights, sensors, or instruments specified by NAVSEA, which must include a secondary containment barrier. Sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required in the lot, and inspection and acceptance occur at the destination. All items must be marked per MIL-STD-129, palletized per DLA packaging requirements, and delivered FOB origin by February 15, 2027, with a contract delivery deadline of March 6, 2027. The contract enforces stringent quality controls under RQ001 and RQ009, including inspection at origin, and prohibits any government identification on non-accepted supplies per RQ011. The solicitation number is SPE4A6-26-T-05WG, issued by the Department of Defense’s ASC Commodities Division, with delivery directed to Tinker AFB, Oklahoma, and all technical requirements governed by the current DLA Master List of Technical and Quality Requirements effective at the solicitation issue date.
ASC COMMODITIES DIVISION

POSTED

about 7 hours ago

DEADLINE

in 7 days
View Details