This Solicitation opportunity from Department Of Defense was posted on July 23, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.
TURNBUCKLE
Contract Overview
Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.
Active Opportunities Like This One
AI Contract Overview
This contract specifies the procurement of a 1/2-13 NC thread, 9-inch take-up turnbuckle with a steel zinc-coated finish, manufactured via forging process and governed by military and consensus standards, with mandatory compliance to the current revision of the defining part standard. Quality assurance is strictly controlled through MIL-STD-1916 or ASQ H1331 zero-based sampling plans, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes are treated as major unless otherwise dictated. All hardware must be produced in accordance with the latest revision of the applicable standard, and past production to prior revisions is not acceptable for items manufactured after the solicitation date. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129, with no special marking required, and palletization must meet DLA’s procurement packaging requirements. The item is designated NSN 5340-00-924-1707, with a unit of issue as individual piece and a mandatory delivery of one unit within 20 days FOB origin. The delivery destination is Camp Humphreys, Building P6953, Pyeongtaek, South Korea, with inspection and acceptance occurring at the destination point. The contract prohibits any quantity variance and requires compliance with hazardous materials packaging and shipping protocols under IP025. The purchase request number is 7007071973, and the required delivery date is April 8, 2024. The contract is issued under solicitation SPE4A6-26-T-09KK by the Department of Defense’s ASC Commodities Division, with technical and quality requirements incorporated by reference from the DLA Master List, including forging-specific sourcing guidance for Aviation, Land & Maritime Supply Chains. All shipping and transportation procedures must follow DLAD Proc Notes C19 and C20, and the supplier is contractually bound to meet all specified conditions without deviation, as the item is critical to DoD logistics and operational readiness.
General Info
Agency
NAICS
Place of Performance
USASet-Aside
Timeline
Submission Closed
Organization & Contact Information
Full Description
TURNBUCKEL
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
A forging process was identified as a means to manufacture this item. Tooling is required to produce a forging. For sourcing, tooling, materials or other information, please contact the appropriate assistance team: (Aviation, C<(>&<)>E Supply Chains) https://www.dla.mil/Aviation/Offers/Engineering/Forging-and-Casting/; (Land & Maritime Supply Chains) DSCC.cast.forge@dla.mil. 1/2-13 NC THD 9 IN. TAKE-UP W/O LOCK NUTS STEEL ZINC COATED FINISH
SAMPLING: THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION, STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
THIS ITEM IS DEFINED BY EITHER BY A MILITARY PART STANDARD, OR A PART STANDARD PUBLISHED BY A CONSENSUS NON-GOVERNMENT STANDARDS ORGANIZATION.
HARDWARE MANUFACTURED TO THE CURRENT REVISION OF THE PART STANDARD DEFINING THIS ITEM IS ACCEPTABLE. HARDWARE MANUFACTURED IN THE PAST TO A PREVIOUS, BUT THEN CURRENT, REVISION OF THE STANDARD IS ACCEPTABLE. ANY HARDWARE MANUFACTURED FROM THE DATE OF THIS SOLICITATION FORWARD, SHALL BE MANUFACTURED IN ACCORDANCE WITH THE CURRENT REVISION OF THE PART STANDARD IN QUESTION.
TDP Rev A Gen 1 IAW BASIC UNK FF-T-791B(1) NOT 1 REVISION NR B DTD 07/15/1994 PART PIECE NUMBER: TY 1 FM 1 CL 8
SPE4A6-26-T-09KK
SECTION B
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7007071973 0001 EA 1.000
NSN/MATERIAL:5340009241707
DELIVERY (IN DAYS):0020
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:EC OPI:O
PACK CODE:Q PACKING LEVEL: B
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
BULK BREAK POINT:
WT4KDK
0194 CS BN CO A COMPOSITE
AWCF SSF
CAMP HUMPHREYS BLDG P6953
PYEONGTAEK 17982
KR
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
WT4KDK
0194 CS BN CO A COMPOSITE
AWCF SSF
CAMP HUMPHREYS BLDG P6953
PYEONGTAEK 17982
KR
SPE4A6-26-T-09KK
SECTION B
PR: 7007071973 PRLI: 0001 CONT’D
MARKFOR
WT4KDK
0194 CS BN CO A COMPOSITE
AWCF SSF
CAMP HUMPHREYS BLDG P6953
PYEONGTAEK 17982
KR
M/F: (TCN) WT4KDK40930389
RDD: 108
PROJ: TP 3
SUPP ADD: W9046W SIG: C
FOR GOVERNMENT USE ONLY: (IPD) 12
DIC: A01 DIST: V ADV: FC: Z9
Need Ship Date:00/00/0000 Original Required Delivery Date:04/08/2024
SPE4A6-26-T-09KK NSN/Part Number: 5340-00-924-1707 Quantity: 1 EA Purchase Request: 7007071973QTY: 1 Delivery: 20 days ADO
More opportunities from Department Of Defense → ASC COMMODITIES DIVISION
Same awarding agency
Find Active Opportunities Like This
Get AI-powered intelligence on the opportunities still open
Every page of the solicitation package shredded into a compliance breakdown
AI-powered matching based on your capabilities and past performance
Competitor and incumbent history on the requirement
Automated alerts on amendments, Q&A deadlines, and award
Join 650+ contractors already using CLEATUS