Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Twenty-two (22) 81000RE R.M. Young Brand 3 Axis Ultrasonic Anemometers and cables

Active
145022-26-0004Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract solicits twenty-two (22) brand-new 81000RE R.M. Young 3 Axis Ultrasonic Anemometers along with twenty-two (22) 36-foot data cables, for the precise measurement of horizontal and vertical wind speed, direction, and variability to support atmospheric flow analysis and emergency response plume modeling. All items must be new, not refurbished, and strictly meet the brand-name specification with no substitutions accepted without explicit approval. The acquisition is set aside exclusively for small businesses as defined by NAICS code 334519 with a size standard of 600 employees, and all offered products must comply with Buy American requirements, including verified documentation of country of manufacture. Pricing must be submitted as a firm fixed-price, all-or-none quotation, with monthly and annual costs provided for base and any optional periods, payable under Net 30 terms via IPP billing. Delivery is required by October 15, 2026, to NOAA/ARL/SORD at North Las Vegas, Nevada, under FOB Destination terms. Quotes must be submitted electronically by 12:00 noon EST on August 11, 2026, to Barbara Shifflett’s email address, with confirmations of receipt the responsibility of the offeror. The solicitation, identified as 145022-26-0004, is a combined synopsis and RFQ issued under FAR Part 12 for commercial items, incorporating applicable provisions and clauses referenced via www.acquisition.gov. The government will not be responsible for late or unconfirmed submissions, and award will be made on the lowest priced technically acceptable offer. Additional compliance notes clarify that certain SAM representations required by system defaults will be disregarded under NOAA Deviation 2025-02/03.

General Info

Twenty-two new 81000RE anemometers and cables for wind measurement, small business set-aside, Buy American compliant, FOB destination, due October 15, 2026.

Agency

Department Of Commerce NoaaView Agency

NAICS

334519 - Other Measuring and Controlling Device ManufacturingView NAICS

Place of Performance

North Las Vegas, NV, 89030, USA

Set-Aside

SBA

Documents

(1)

Brand+Name+Justification-SAP-145022-26-0004.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseCombined Synopsis
Posted

Combined Synopsis

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Commerce Noaa
Contacts2 people available
OfficeKANSAS CITY, MO, 64106, USA
Organization / Agency
Department Of Commerce Noaa
View Agency Profile
Office AddressKANSAS CITY, MO, 64106, USA
Contacts

Full Description

Show more

CLIN 1001 -


Twenty-two (22) 81000RE R.M. Young Brand 3 Axis Ultrasonic Anemometers, twenty-two (22) 36 foot data cables, with tariff, and shipping to measure horizontal and vertical wind speed, direction, and variability to determine the flow of the atmosphere and atmospheric stability for emergency response plume modeling.



 


(i) This is a combined synopsis/solicitation for commercial products or commercial services prepared in accordance with part 12. This announcement constitutes the only solicitation. Quotes are being requested and a separate written solicitation will not be issued.



Solicitation number 145022-26-0004 is issued as a request for quotation (RFQ), for twenty-two (22) 81000RE R.M. Young Brand 3 Axis Ultrasonic Anemometers, twenty-two (22) 36 foot data cables, with tariff, and shipping to measure horizontal and vertical wind speed, direction, and variability to determine the flow of the atmosphere and atmospheric stability for emergency response plume modeling.



This acquisition is set-aside for small business concerns.  The associated NAICS code is 334519.  The small business size standard is 600.  



The Government intends to award a low priced, technically acceptable brand name firm fixed-price purchase order on an all or none basis with payment terms of Net 30.



This solicitation incorporates provisions and clauses by reference. The full text of provisions and clauses may be accessed electronically at www.acquisition.gov.



(ii) A list of line-item number(s) and items, quantities, and units of measure (including option(s), if applicable).



NEW ITEMS ONLY, NO REFURBISHMENTS ACCEPTED.


BRAND NAME OR EQUAL REQUIREMENT FOR THE FOLLOWING:



SUPPLY - CLIN 1001 -


Twenty-two (22) 81000RE R.M. Young Brand 3 Axis Ultrasonic Anemometers, twenty-two (22) 36 foot data cables, with tariff, and shipping to measure horizontal and vertical wind speed, direction, and variability to determine the flow of the atmosphere and atmospheric stability for emergency response plume modeling.



All offered products must meet the requirements of Buy American-Supplies to be considered. Provide verification of the country of manufacture for offered products.



(iii) Description of requirements for the items to be acquired, including documentation supporting any brand name descriptions (see 12.102).



INVOICES TO BE BILLED MONTHLY IN ARREARS VIA IPP. PROVIDE MONTHLY AND ANNUAL PRICING FOR EACH BASE AND OPTION YEAR. QUOTE PRICING MAY BE PROVIDED ON ATTACHED SF18 FORM OR ON COMPANY LETTERHEAD.



(iv) Date(s) and place(s) of delivery and acceptance and f.o.b. point (see part 47).



Deliver by October 15, 2026.



Delivery shall be FOB Destination to 


NOAA/ARL/SORD


316 Atlas Dr. STE., 


D1 MS 516 


North Las Vegas, NV 89030 



 


(v) A list of solicitation provisions that apply to the acquisition (see 12.205(a)) can be found on the Request for Quote Form SF18 attachment in Section 5 Other Contract Terms and Conditions. 



(vi) A list of contract clauses that apply to the acquisition (see 12.205(b)) can be found on the Request for Quote Form SF18 attachment in Section 4 Contract Terms and Conditions.



(vii) Quotes are required to be received in the contracting office no later than 12:00 noon  EST on 08/11/2026.  All quotes must be submitted electronically via email to Barbara.Shifflett@noaa.gov. 



THE GOVERNMENT DOES NOT ACCEPT RESPONSIBILITY FOR NON-RECEIPT OF QUOTES.  IT IS THE CONTRACTOR’S RESPONSIBILITY TO REQUEST AND RECEIVE A CONFIRMATION OF THE QUOTE RECEIPT.



(viii) Any other additional information required by 5.101(c). 



Per NOAA Deviation 2025-02/03: System updates may lag policy updates. The System for Award Management (SAM) may continue to require entities to complete representations based on provisions that are not included in agency solicitations. Contracting officers will not consider those representations when making award decisions or enforce requirements. Entities are not required to, nor are they able to, update their entity registration to remove these representations in SAM.


Similar Contracts

Same NAICS industry code

NAICS: 334519
New
DIBBS
COMPASS, MAGNETIC, UNMOU
Solicitation # SPE7M2-26-T-5982
This contract is for the procurement of 1,665 magnetic, unmounted compasses identified by NSN 6605-00-553-8795 under solicitation SPE7M2-26-T-5982, with delivery required within 161 days to the DLA Distribution facility in New Cumberland, Pennsylvania. The item is classified as a critical application item and must comply with Technical Data Package Rev B Gen 2 referenced to drawing NFES1814 and quality assurance procedure QAP-106. All supplies must adhere to MIL-STD-2073-1E for packaging, MIL-STD-129 for marking and labeling, and DLA packaging requirements, including specific preservation methods and the prohibition of mercury or mercury compounds in any preservation, packaging, or marking materials, except for functional uses in batteries, instruments, or weapon systems as permitted by NAVSEA. Packaging must also meet CMMC Level 2 cybersecurity self-assessment requirements, and covered defense information protocols apply. The contract enforces zero tolerance on quantity variance and mandates inspection and acceptance at the destination. The item must be shipped FOB origin with a required delivery date of July 6, 2027, and a needed ship date of July 23, 2026. All shipments must follow DLA transportation procedures and use the designated parcel post address. The contract incorporates technical, quality, and cybersecurity requirements from the DLA Master List and specifies the primary point of contact for inquiries.
NUCLEAR REACTOR PROGRAM

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334519
New
DIBBS
GENERATOR, TACHOMETE
Solicitation # SPE4A6-26-Q-1037
The Department of Defense, through DLA Aviation, is seeking information to identify potential manufacturers capable of producing the generator tachometer with National Stock Number 6680-00-432-5477. This request is strictly informational and does not constitute a solicitation, request for proposal, or commitment to award a contract. Respondents are asked to provide the names of manufacturers able to produce the item, their physical locations in city and state or country, and any available points of contact, with all submissions directed to Karen Randolph at Karen.Randolph@dla.mil by the deadline of June 22, 2026. The notice identifies two approved sources for the part—Haydon Kerk Motion Solutions (CAGE 02005) and Ametek Technical & Industrial (CAGE 14404), both using part number 08TG873-1—as reference points for sourcing efforts. The procurement falls under the 8(a) Sole Source set-aside program with a NAICS code of 334519, indicating it is targeted toward small disadvantaged businesses, though no formal award is guaranteed or currently funded. The posting is issued under solicitation number SPE4A626Q1037, administered from Richmond, Virginia, with additional contact points provided through Kee-sha Eskridge. No pricing, delivery terms, evaluation criteria, or contractual obligations are associated with this notice, and responses are voluntary with no reimbursement for preparation costs.
ASC COMMODITIES DIVISION

POSTED

about 18 hours ago

DEADLINE

in 14 days
View Details
NAICS: 334519
New
DIBBS
STARTER, MOTOR
Solicitation # SPE7M1-26-T-246U
The contract specifies the procurement of a starter motor with part number CR306B004ZABB and NSN 6110012999272, requiring one unit to be delivered within 20 days FOB destination. Strict prohibitions are in place against the use or incorporation of Class I ozone-depleting chemicals, superseding any conflicting specification requirements while maintaining all product performance standards; alternative chemicals require prior approval unless explicitly authorized. Mercury and mercury-containing compounds are banned from direct contact with the hardware except for specific functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or NAVSEA-specified chemical reagents, with portable mercury-containing devices requiring shockproof construction and a secondary containment barrier per NAVSEA 5100-003D. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129 for marking, with no special marking required, and palletization must adhere to DLA packaging requirements. The item is designated as a critical application item and must be shipped by the fastest traceable means—parcel post is prohibited—with delivery directed to the USNS COMFORT at FPO AE 09566. The solicitation is issued under contract number SPE7M1-26-T-246U, with a required delivery date of July 29, 2026, and incorporates technical and quality requirements from the DLA Master List, governing revisions based on the acquisition type and timeline. The unit of issue is EA, and the contract is managed by the Department of Defense under the Maritime Supply Chain organization.
MARITIME SUPPLY CHAIN

POSTED

about 18 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334519
New
DIBBS
CONTROLLER, MOTOR
Solicitation # SPE7M1-26-T-225W
The contract is for the procurement of two Motor Controllers, identified by NSN 6110014091418 and part number 70051-3, to be supplied by MORPAC INDUSTRIES, INC under solicitation SPE7M1-26-T-225W. Delivery is required within 168 days after receipt of order, with a need ship date of January 19, 2027 and a required delivery date of March 25, 2027, to the designated receiving facility in Tracy, California. The item is classified as a critical application item and must comply with strict packaging and marking standards including MIL-STD-2073-1E for preservation and MIL-STD-129 for labeling and barcoding, with palletization following DLA Packaging Requirements RP001. No mercury or mercury-containing compounds may be intentionally used except in specific exempted applications such as batteries, fluorescent lamps, or instruments as defined by NAVSEA, with portable devices containing mercury requiring a second containment boundary. The contract is priced at $3,255 per unit for a total of $6,510, with zero variance allowed in quantity. Title transfers at origin, and payment processing must occur through the Wide Area WorkFlow system. The contract incorporates multiple Federal Acquisition Regulation clauses, including those governing changes, termination, authorization and consent, cyber safeguards, small business representations, and accelerated payments to subcontractors, with deviations applied under 2026-00038 and other DFARS deviations for cybersecurity requirements including NIST SP 800-171 compliance. Offerors must maintain active SAM registration, provide UEI and CAGE codes, and meet socioeconomic status certifications if claiming small business or other preferential status. All materials are subject to destination inspection and acceptance, with compliance required to the Buy American Act and Berry Amendment where applicable. The solicitation operates under an automated simplified acquisition process, suggesting lowest price technically acceptable award methodology, though no explicit evaluation weights are defined. Technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements must be adhered to, and no hazardous materials are indicated to require special labeling beyond standard compliance. All proposals must be submitted electronically via DIBBS by the August 6, 2026 deadline.
MARITIME SUPPLY CHAIN

POSTED

about 18 hours ago

DEADLINE

in 2 days
View Details
NAICS: 334519
New
DIBBS
THERMOSTATIC ELEMEN
Solicitation # SPE4A6-26-T-11NW
The contract pertains to the procurement of two thermostatic elements, identified by NSN 6680-01-233-9058 and part number 54850 from Leslie Controls, Inc., supplied under solicitation SPE4A6-26-T-11NW. Delivery is required within 20 days to the destination FPO AP 96662 aboard the USS CHOSIN CG 65, with no tolerance allowed in quantity variance. The items must be packaged and marked in strict compliance with MIL-STD-2073-1E and MIL-STD-129, with special prohibition against mercury or mercury compounds in any preservation, packaging, or marking materials. Packaging instructions reference DLA-specific requirements including RP001, and shipment must utilize the fastest traceable means, explicitly excluding parcel post. The delivery is FOB destination, with inspection and acceptance occurring at origin. Special handling codes include unit container D3, intermediate container E5, and packaging code U, with no special marking required. All units must be palletized per DLA standards, and the contract mandates that vendors use VSM for shipment tracking. The original required delivery date is July 27, 2026, with a primary point of contact at DLA being Katisha Carter. The contract includes multiple referenced object texts—RA001, RP001, RQ011, RQ017, ZD080, RQ002, and ZD025—indicating integration with standardized military logistics and technical documentation systems. The National Security Agency unit of issue is EA and pricing is listed at $0.00 per unit, suggesting this may be a no-cost or internally allocated requirement. The contract is classified as a critical application item, emphasizing importance to operational functionality. For government use, the IPD code is 05, DIC code A4A, and distribution is marked 9B with freight code FR and no advance notice required. The solicitation was posted on August 3, 2026, with responses due by August 11, 2026, under a federal procurement structure administered by the Department of Defense’s ASC Commodities Division, with performance directed to a military vessel address. Project code EE5 TP 2 and supplier address YAS009 are associated with this requirement, alongside transmission control number R2162
ASC COMMODITIES DIVISION

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334519
New
DIBBS
SWITCHING UNIT, POWER T
Solicitation # SPE7M1-26-T-248D
The contract is for the procurement of three Switching Units, Power Transfer, identified by NSN 6110-01-493-3386 and manufacturer part number A94231009A1D from ASCO Power Technologies LP. All items must comply with DLA packaging requirements and be delivered FOB origin within 157 days, with no variance allowed in quantity. Inspection and acceptance occur at the destination, with packaging mandated to meet MIL-STD-2073-1E and marking conforming to MIL-STD-129. No special marking is required, and palletization must adhere to DLA standards. The unit is classified as a critical application item, and sampling must follow MIL-STD-1916, ASQ H1331 Table 1, or an equivalent zero-based plan, with critical attributes held to a verification level of VII or 0.1 AQL. Mercury and mercury compounds are strictly prohibited unless part of functional batteries, fluorescent lights, specified instruments, weapon systems, or NAVSEA-approved chemical reagents, and any portable mercury-containing devices must include shock-resistant construction and a secondary containment boundary as per NAVSEA 5100-003D. The contract references the DLA Master List of Technical and Quality Requirements for all incorporated R and I numbers, and deviations or engineering changes require formal requests. The delivery destination is the DLA Distribution facility in New Cumberland, Pennsylvania, with a required ship date of January 19, 2027, and an original delivery deadline of November 14, 2027. The solicitation was issued under SPE7M1-26-T-248D, and all technical and quality provisions are controlled by the master list revision in effect on the solicitation issue date.
MARITIME SUPPLY CHAIN

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334519
New
DIBBS
HYDROMETER, GRADUATE
Solicitation # SPE2DH-26-T-5758
The contract specifies the procurement of a graduated hydrometer with an integrated thermometer for measuring liquid temperature, conforming to ASTM designation 6H and featuring a specificity range of 39–51 with 0.1 increments. The device is constructed from soda lime glass and is free of lead and mercury, ensuring environmental and safety compliance, and is certified to NIST standards. Each unit is to be supplied individually, with packaging requirements strictly aligned with Medical Marking Standard No. 1, replacing all references to MIL-STD-129; each unit must be sealed in a protective container and packed in commercial shipping containers suitable for safe transport via common carrier at the lowest cost to the designated delivery point, with proper labeling and markings. The item is identified by NSN 6630-01-687-6909 with a quantity of one, and delivery must occur within 20 days after order. The solicitation, issued under SPE2DH-26-T-5758, is governed by DLA technical and quality requirements referenced by R and I numbers, and covered defense information protocols apply. Packaging must adhere to DLA’s procurement standards, including removal of government identification from non-accepted supplies. The contracting agency is the Department of Defense’s Medical Supply Chain FSH, with the point of performance listed as FPO 09591, and responses must include source and part number details. The solicitation is open for bids until August 10, 2026, with a primary contact for inquiries provided.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 18 hours ago

DEADLINE

in 6 days
View Details
NAICS: 334519
New
DIBBS
THERMOMETER, INDICAT
Solicitation # SPE4A5-26-T-8355
The contract pertains to the procurement of 15 units of a capillary tube indicating thermometer identified by NSN 6685-01-251-7807 and part number 83001-207, supplied by HYDRAULICS INTERNATIONAL INC. The item is classified as a critical application product and must comply with stringent technical and quality requirements outlined in the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers. Sampling procedures must adhere to MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required for acceptance unless otherwise stated, and unspecified attributes are treated as major. Packaging must conform to MIL-STD-2073-1E and MIL-STD-129, including special marking for “Delicate instrument,” and palletization must follow DLA’s packaging guidelines. The unit of issue is each (EA), with a fixed quantity of 15 and no variance permitted. Delivery is required FOB origin with inspection and acceptance occurring at the destination, Hill Air Force Base, Utah, and must be completed within 171 calendar days from contract award, with an original required delivery date of July 7, 2026, and a needed ship date of August 18, 2026. The contract number is SPE4A5-26-T-8355 and the purchase request is 7015600404. All items must be properly labeled and shipped per DLA transport protocols, including the specified parcel post and freight shipping addresses. The solicitation was posted on August 3, 2026, with a response deadline of August 6, 2026, under NAICS code 334519, and is managed by the Department of Defense’s ASC Supplier Oper OEM Division with Dominic Harris as the point of contact.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 18 hours ago

DEADLINE

in 2 days
View Details
NAICS: 334519
New
DIBBS
TRANSDUCER, PRESSURE
Solicitation # SPE4A5-26-T-320E
This contract is for the procurement of 60 pressure transducers with NSN 6695-01-732-4524 and part number 43-075-368 from Engineered Coil Company, under solicitation SPE4A5-26-T-320E. The item must be delivered FOB origin within 94 days of contract award, with no tolerance for quantity variance. Inspection and acceptance occur at the point of origin, and packaging must strictly comply with MIL-STD-2073-1E and DLA packaging requirements, including Marking per MIL-STD-129 with no special codes. The transducer must not contain mercury or mercury compounds in any component or contact surface, except for specific exemptions like functional batteries and sensors as defined by NAVSEA, which must include secondary containment and shockproofing. Sampling for quality verification must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and attribute verification levels are fixed at VII for critical, IV for major, and II for minor characteristics. Item Unique Identification is waived per customer request and DFARS 252.211-7003(c)(1)(i), but all technical and quality standards referenced by R or I numbers in the DLA Master List are incorporated by reference. The delivery destination is the DLA Distribution facility in New Cumberland, Pennsylvania, with shipment instructions governed by DLAD Proc Note C19 and C20. The contract was issued on August 3, 2026, and responses were due by August 11, 2026, with the required delivery date set for November 14, 2026.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334519
New
DIBBS
CELL, COLORIMETER
Solicitation # SPE2DS-26-T-301R
The contract specifies the procurement of two sample cells for colorimetry, each with a 10 mL capacity and a 1 cm path length, manufactured by Hach Company under part number 4864302. These cells are plastic, supplied in sets of two with caps, and are not regulated by the FDA. The unit of issue is a package (PG), with each PG containing two units, and the total quantity required is two PGs. All packaging and labeling must comply with the Medical Marking Standard No. 1, which supersedes MIL-STD-129, and must provide sufficient protection against damage during normal shipping and handling. Packaging must adhere to ASTM D3951 unless superseded by the DLA Master List of Technical and Quality Requirements, which take precedence. Mercury or mercury-containing compounds are prohibited unless explicitly exempted for functional components like sensors or reagents, and any mercury-containing portable devices must include secondary containment as specified by NAVSEA. Each unit must be sealed in a commercial container, and palletization must follow DLA’s RP001 packaging requirements. Delivery is FOB destination within five days, with no tolerance for quantity variance, and inspection and acceptance occur at the destination. The items are destined for two locations: USS THEODORE ROOSEVELT CVN 71 and the Distribution Management Office at Camp Kinser, Japan, with shipments required to use traceable methods and not parcel post. The contract’s solicitation number is SPE2DS-26-T-301R, with a response deadline of August 10, 2026, and an original required delivery date of August 4–5, 2026.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details

More opportunities from Department Of Commerce Noaa

Same awarding agency

NAICS: 811310
New
Federal
NEXRAD Site-Specific HVAC MaintenanceThis contract encompasses specialized HVAC maintenance services for NEXRAD facilities, where precise environmental controls are critical to safeguarding sensitive radar electronics from temperature and humidity fluctuations. The work requires scheduled preventive maintenance to ensure continuous system reliability and rapid emergency response capabilities to address failures that could compromise radar functionality. Service providers must possess the technical expertise to operate within the stringent operational demands of NOAA’s weather surveillance infrastructure, maintaining optimal conditions to prevent equipment degradation and ensure uninterrupted data collection. The contract is classified as a subcontract under NAICS code 811310 and was posted on August 3, 2026, with a response deadline of August 14, 2026. It is managed by the Department of Commerce, specifically under NOAA, and performance is expected at NEXRAD sites nationwide, though specific locations are not detailed. There is no set-aside designation, and no point of contact information has been provided. All bids must be submitted through the official SAM.gov portal prior to the deadline, with technical compliance and proven experience in mission-critical HVAC systems being essential for evaluation.
Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

about 23 hours ago

DEADLINE

in 10 days
View Details
NAICS: 811310
New
Federal
HVAC Preventive Maintenance for Critical FacilitiesThe contract requires the execution of routine preventive maintenance on heating, ventilation, and air conditioning systems across National Weather Service facilities, including Weather Forecast Offices, Maintenance Annexes, and NEXRAD radar sites. The primary objective is to ensure consistent and reliable climate control to protect sensitive meteorological equipment from environmental damage, thereby maintaining operational integrity and data accuracy. Maintenance activities must be performed comprehensively and on schedule to prevent system failures that could compromise weather monitoring and forecasting capabilities. This subcontract is issued under NAICS code 811310, which classifies the work within HVAC repair and maintenance services, and is managed by the Department of Commerce through NOAA. The solicitation was posted on August 3, 2026, with a response deadline of August 14, 2026. Performance is expected at multiple locations nationwide where NWS infrastructure is deployed, and contractors must demonstrate capability to service critical infrastructure under precise environmental and operational standards. The contract does not specify a set-aside status and lacks detailed point of contact or geographic specifics, suggesting the scope is centralized under NOAA’s broader facilities management framework.
Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

about 23 hours ago

DEADLINE

in 10 days
View Details
NAICS: 811310
New
Federal
NWS HVAC PREVENTIVE MAINTENANCE (PM) WFO AND NEXRA
Solicitation # 1305M326Q0391
The contract solicits quotations for preventive maintenance services for HVAC systems at two National Weather Service locations in Greer, SC—the Weather Forecast Office and the Next Generation Radar site—under solicitation number 1305M326Q0391. The scope includes all labor, equipment, and materials required to perform comprehensive preventive maintenance in accordance with the Statement of Work, which applies to the base year and up to four option years. The government intends to award a single firm fixed-price purchase order on an all-or-nothing basis to the lowest-priced technically acceptable offer, with payment terms of Net 30. This solicitation is issued as a commercial services procurement under FAR Part 12 and is a Small Business Set Aside, meaning only small businesses are eligible to respond. The solicitation is open to all responsible sources, and responses must be submitted by the deadline of August 13, 2026. Offerors are responsible for ensuring receipt of their quotation and must confirm delivery, as the government assumes no liability for non-receipt. Wage determinations required under the Department of Labor must be followed and can be accessed via SAM.gov or the solicitation attachments. The contracting office is located in Seattle, WA, and the point of contact is Jamie R. Rosales. Entities are advised that outdated representations in SAM may not affect award decisions, as per NOAA Deviation 2025-02/03, and no action is required to remove them. All technical requirements and documentation are detailed in the SF18 form referenced in the solicitation.
Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

about 23 hours ago

DEADLINE

in 10 days
View Details
NAICS: 221310
New
Federal
Z--IRRIGATION SYSTEM FOR NATL WEATHER SVC IN TEXAS
Solicitation # 1305M326Q0268
This contract solicits non-personal services for the complete removal and replacement of existing irrigation systems and associated landscape drainage repairs at three National Weather Service facilities in Texas—Corpus Christi, Midland, and New Braunfels. It is issued as a Request for Quotation under the Revolutionary FAR Overhaul Part 12, designated exclusively as a small business set-aside with a NAICS code of 221310 and a size standard of $41.0 million. The work must be performed within 120 days of contract award, with an estimated award date of August 17, 2026, and quotes are due by 10:00 a.m. MDT on August 7, 2026, submitted electronically to kerri.coffey@noaa.gov. Each location has a distinct CLIN, requiring full turnkey execution including supervision, labor, tools, materials, and equipment to install modern weather-based irrigation systems, restore sod and rock, correct drainage slopes, replace edging, and remove debris, all in compliance with the attached Statement of Work and OSHA, NEC, EPA, and NFPA standards. The contract requires adherence to the U.S. Department of Labor wage determination 2015-4137 Revision 31 for each site, and contractors must submit pricing on SF 18 or company letterhead, including UEI and CAGE codes from SAM.gov. The Government emphasizes site visits as critical to understanding site conditions, with Jorge Negrete coordinating access to the locations, and explicitly states that failure to inspect the site will not constitute grounds for claim post-award. Evaluation will be based on a trade-off process where technical approach and relevant experience are of equal importance and significantly outweigh price, which is not scored but reviewed for completeness and reasonableness. Payment must be processed through the Invoice Processing Platform, and contract administration is handled by Kerri Coffey as the primary point of contact. Additional requirements include mandatory sexual harassment and assault prevention training for all personnel within 30 days of assignment, annual renewal by March 1, and strict adherence to non-personal services terms prohibiting any form of Government supervision or control over contractor personnel. The contract incorporates multiple FAR clauses by reference, including those related to System for Award Management maintenance, prohibition of internal confidentiality agreements, and subcontract reporting, while explicitly noting that deviations in SAM.gov representations do not affect award eligibility. There are no options, no packaging or marking requirements specified, and
Water Supply and Irrigation Systems

POSTED

about 23 hours ago

DEADLINE

in 7 days
View Details
NAICS: 811310
New
Federal
NWS HVAC PREVENTIVE MAINTENANCE (PM) WFO AND NEXRA
Solicitation # 1305M326Q0394
The contract solicits quotations for preventive maintenance services on HVAC systems at two National Weather Service locations in South Carolina: the Weather Forecast Office in Charleston and the NEXRAD facility in Early Branch. The solicitation number is 1305M326Q0394, issued as a request for quotations under FAR Part 12 for commercial services, with a firm-fixed-price structure awarded on an all-or-none basis to the lowest priced technically acceptable offer. Payment terms are net 30 days. The scope encompasses all labor, equipment, and materials required to perform comprehensive preventive maintenance in accordance with the Statement of Work, which applies to the base year and up to four option years. The requirement is designated as a Small Business Set Aside with total set-aside status under NAICS code 811310, meaning only small business concerns are eligible to compete. All responsible sources may submit responses, but vendors are solely responsible for ensuring receipt of their quotations and must confirm delivery. Department of Labor prevailing wage rates apply and are available via SAM.gov or the solicitation attachments. The contract is managed by NOAA under the Department of Commerce, with Jamie R. Rosales as the primary point of contact. The response deadline is August 14, 2026, and the award will be made without further solicitation or written notice beyond this RFQ.
Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

about 23 hours ago

DEADLINE

in 10 days
View Details
NAICS: 335999
New
Federal
NOAA: Build to Specifications Power Supply with Fan Trays for the National Logistics Support Center in Grandview, MO.
Solicitation # 1305M226Q0212
The National Oceanic and Atmospheric Administration (NOAA), under the Department of Commerce’s Eastern Acquisition Division, is seeking to award a firm fixed price contract for nine Power Supplies with Fan Trays to be delivered to the National Logistics Support Center in Grandview, Missouri. This acquisition is a total small business set-aside under NAICS code 335999, with award determined on a best value basis pursuant to FAR 12.203(c)(2). All offerors must be registered in the System for Award Management (SAM) and possess a valid Unique Entity Identifier (UEI) to be eligible for award. An amendment has been issued to address vendor inquiries by providing technical clarifications and to extend the solicitation response deadline by five days, allowing all previously submitted quotes to review, revise, and resubmit pricing for line items 0001 and 0002. All prior respondents are required to sign and return the amendment via SF-30 as acknowledgment of changes; failure to do so will result in disqualification from further consideration. Contract performance requires strict adherence to MIL-STD-129M and MIL-STD-1189B standards for packaging, marking, and barcoding. Each unit must be individually packaged in durable shipping containers that protect against corrosion, deterioration, and physical damage throughout shipment, handling, and storage. Markings must be in capital letters with a minimum height of 0.095 inch and include the NSN, CAGE code, contract number, CLIN, item description, quantity, and serial numbers. Barcodes must use Code 3 of 9 symbology per MIL-STD-1189B, with human-readable interpretations matching exactly and positioned below or above the barcode. A serial number list must be included inside each container, labeled “SERIAL NUMBER LIST INSIDE.” Packaging slips must be waterproofed to MIL-PPP-E540, Class 1 standards and contain all required data including shelf-life dates and hazardous material identifiers where applicable. Deliveries must be made to the specified location in Grandview, Missouri, and the Government retains acceptance authority at that site. Failure to comply with any element of the Instructions to Offerors, including mandatory responses to items 1 through 10, will result in a non-compliant submission and exclusion from award consideration.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 23 hours ago

DEADLINE

in 6 days
View Details
NAICS: 811310
New
Federal
NWS HVAC PREVENTIVE MAINTENANCE (PM) ML in Ohio
Solicitation # 1305M326Q0387
The contract solicitation seeks qualified vendors to provide comprehensive non-personal HVAC preventive maintenance services across multiple National Weather Service locations in Wilmington, Ohio, including Weather Forecast Offices, Maintenance Annexes, and NEXRAD radar sites. The work must be performed in strict alignment with the Statement of Work, which governs the Base Year and all four optional contract years, and includes all labor, equipment, and materials required to maintain system reliability and efficiency. The government is seeking a single firm fixed-price purchase order to be awarded on an all-or-none basis based on the lowest technically acceptable quotation, with payment terms set at Net 30 days. All responses must be submitted by the deadline of August 14, 2026, and contractors are solely responsible for confirming receipt of their submissions, as the government assumes no liability for non-receipt. The solicitation, numbered 1305M326Q0387, was posted on August 3, 2026, and is classified under NAICS code 811310 for HVAC maintenance services. It is being issued in accordance with FAR Part 12 as a commercial services procurement, with no separate written solicitation to follow. Interested parties must comply with applicable Department of Labor wage requirements, accessible via SAM.gov or provided attachments, and should note that certain SAM representations required for system compliance are not relevant to this solicitation under NOAA’s 2025-02/03 deviation. The contracting office is located in Seattle, Washington, and primary inquiries should be directed to Jamie R. Rosales at jamie.rosales@noaa.gov. Performance is limited to specific locations in Wilmington, Ohio, and no set-aside status is designated for this opportunity.
Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

about 23 hours ago

DEADLINE

in 10 days
View Details