Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Two-Photon Polymerization (2PP) 3D Printer

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The Department of the Navy's Measurement Science and Engineering Department is forecasting the acquisition of a Two-Photon Polymerization 3D Printer. This technology will enable the department to investigate, design, and generate specialized metrological solutions tailored to meet both current and emerging fleet requirements. A primary immediate application for this equipment involves the printing of micro-optics directly onto fiber optic surfaces. These components will be utilized as environmental sensors to enhance and augment multi-mode determination efforts. The procurement falls under NAICS code 334510.

General Info

Navy seeks Two-Photon Polymerization 3D Printer for specialized metrological solutions and micro-optics.

Agency

Department Of The Navy → Measurement Science And Engineering Department

NAICS

334510 - Electromedical and Electrotherapeutic Apparatus Manufacturing

Place of Performance

USA

Set-Aside

NONE

Documents

0

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedJul 2

forecast

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of The Navy → Measurement Science And Engineering Department

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of The Navy → Measurement Science And Engineering Department

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

3D printing will allow MS Department to investigate, design, and generate metrological solutions to meet Fleet existing and emerging Fleet needs. Immediate applications are in the printing of micro-optics on fiber optic surfaces, which will then be used as environmental sensors and augment multi-mode determination efforts.

Similar Contracts

Same NAICS industry code

Specialized Medical Component FabricationThis subcontract for Specialized Medical Component Fabrication involves the production of precision components for medical devices focused on trauma care and fracture stabilization. Working under prime contractors for BARDA projects within the Department of Health and Human Services, the selected provider will utilize precision CNC machining and molding to fabricate hardware from biocompatible polymers and medical-grade alloys. The contract requires strict adherence to FDA regulatory compliance and ISO 13485 certification to ensure the quality of the finished medical device components. Performance will take place in Washington, with a response deadline set for November 18, 2026.

Barda - Aspr / Daappo / Barda Dcma

POSTED

about 8 hours ago

DEADLINE

Automated Ultrasound-Based, Super Intelligence (SI)-Enabled Fracture Detection

Solicitation # BARDA-FY27-10192026

The Center for Biomedical Advanced Research and Development Authority (BARDA) has issued Sources Sought Notice BARDA-FY27-10192026 to identify innovative medical countermeasure technologies for the rapid triage of musculoskeletal injuries, such as fractures and soft tissue injuries of extremities. This request for information is intended for planning and market research purposes to assess commercially available or nearing-commercial technologies that utilize Super Intelligence (SI) and machine learning for automated ultrasound-based fracture detection. The goal is to find standalone, point-of-care devices that can operate in emergency departments, urgent care centers, and austere field settings without relying on traditional imaging infrastructure like X-ray or CT scans. The desired technology must feature automated volumetric capture, 3D-rotatable modeling, and SI-enabled image processing that outperforms human imaging experts and has undergone FDA 510k clearance processes. BARDA is interested in ruggedized, portable units with sufficient battery life for disaster response, interoperability with electronic health record systems, and minimal training requirements for non-specialist operators. Potential acquisition strategies being explored include direct purchases, leases, or vendor-managed inventory arrangements. Interested small businesses and other than small business concerns under NAICS code 334510 must submit their capabilities statements by 1:00 p.m. Eastern Time on November 18, 2026. Submissions must include separate Technical and Business Representation sections, each limited to 10 pages in 12-point Times New Roman font, and be emailed to Justin Moore and Richard Hall. Responses should detail the company's manufacturing capabilities within the United States, regulatory maturity, supply chain resilience, and cybersecurity standards for handling sensitive patient health information.

Barda - Aspr / Daappo / Barda Dcma

POSTED

about 8 hours ago

DEADLINE

Supplier of Digital Levels and Survey AccessoriesThis subcontract agreement establishes a supplier for digital levels and non-core survey accessories to support prime contractors working on projects for the California Department of General Services and Caltrans. The scope of work includes the delivery of digital leveling equipment and a variety of catalog-based accessories, such as poles, prisms, and tripods, all of which must adhere to general land surveying industry standards. Managed under the DGS Statewide Procurement agency, the contract falls under NAICS code 334510. The solicitation was posted on October 20, 2026, with a response deadline set for November 2, 2026.

DGS - Statewide Procurement

POSTED

about 20 hours ago

DEADLINE

Supplier of Robotic Total Stations and Spatial StationsThis subcontract agreement establishes a supplier for high-precision robotic total stations and spatial stations to support prime contractors working on California Department of General Services and Caltrans projects. The contract requires the delivery of new, latest-model equipment, specifically robotic total stations featuring reflectorless capabilities exceeding 50 meters and single prism capabilities exceeding 800 meters. Additionally, spatial stations must provide scan rates of 25,000 points per second and maintain an angular accuracy of 3 arcseconds. All provided equipment must strictly adhere to IEC 60825-1 and ANSI Z136.1 laser safety standards. Managed under the DGS Statewide Procurement agency with NAICS code 334510, the solicitation was posted on October 20, 2026, with a response deadline of November 2, 2026.

DGS - Statewide Procurement

POSTED

about 20 hours ago

DEADLINE

Digital Tomosynthesis Veterinary X-Ray System SupplierThis subcontract involves the supply of a complete portable digital tomosynthesis-capable X-ray system for prime contractors working on City of Norfolk veterinary projects for the Zoo. The required equipment includes a portable X-ray generator, tube, a digital radiographic detector with a minimum size of 6x6 inches, a tomosynthesis workstation, necessary software, and mobile carts. To ensure seamless integration and accessibility, the system must be fully DICOM compatible, PACS-ready for storage, and the software must adhere to WCAG compliance standards. The successful supplier will deliver one fully functional imaging system backed by a one-year manufacturer warranty. This procurement falls under NAICS code 334510, with a response deadline set for November 2, 2026.

POSTED

DEADLINE

Defibrillator Electrode Pad SupplierThis subcontract opportunity is for a supplier to provide defibrillator electrode pads to prime contractors supporting Department of Defense contracts through the Medical Supply Chain MD Surg FSF. The selected provider must manufacture or source electrode pads that strictly adhere to NSN 6515-01-613-1594 specifications. The scope of work includes comprehensive commercial packaging and packing to ensure each unit is sealed in a suitable container for protection, meeting all DLA packaging requirements for medical acquisitions. Interested parties must respond by October 26, 2026, for this requirement categorized under NAICS code 334510.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

Battery Test Set ManufacturingThis subcontract involves the manufacture and supply of 16 complete Battery Test Sets for prime contractors supporting the Department of Defense, specifically the DLA Weapons Support Nuclear Reactor Program. The scope of work includes the assembly, integration, and quality assurance testing of the units to ensure they meet the strict specifications required for NSN 6625-01-737-4917, utilizing specialized electronics assembly equipment and calibration tools. The project falls under NAICS code 334510 and will be performed in New Cumberland, Pennsylvania. Interested parties should note the response deadline of October 30, 2026, for this procurement effort.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

DEADLINE

ADAPTER, AIRWAY, CAPNOME

Solicitation # SPE2DS-27-T-0778

Solicitation SPE2DS-27-T-0778 is issued by the Department of Defense Medical Supply Chain for the procurement of one box of hand-held capnometer airway adapters, NSN 6515-01-623-0942. These disposable, non-sterile, white plastic adapters are designed for adult and pediatric use and must have a maximum dead-space of 6.0 ml. Each box contains 25 units. The items are subject to a non-extendable shelf life of 60 months, with a requirement that no more than 9 months have elapsed from the date of manufacture to the date of delivery to the government. The contract specifies delivery within 20 days after receipt of order to the Commanding Officer Station Sar Lemoore in California, with FOB, inspection, and acceptance all set to destination. Packaging must comply with ASTM D3951 and DLA requirement RP001, while labeling must adhere to MIL-STD-129 and the latest MMS1A revision, including the manufacturer date, expiration or retest date, and contract/lot number. Bidders must specify the source and part number being supplied. The award is governed by NAICS code 334510 and incorporates various FAR and DFARS clauses, including the HUBZone price evaluation preference and strict cybersecurity reporting requirements under DFARS 252.204-7012.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

Orthopaedic Surgical Equipment SupplierThis subcontract opportunity is for the supply of high-tech surgical equipment to prime contractors supporting NHS Supply Chain orthopaedic and trauma theater projects. The scope of work includes the delivery and installation of advanced hardware such as robotic-assisted surgery systems, surgical navigation, imaging equipment, fluid management systems, arthroscopic consoles, and high-speed bone power tools. Managed by Supply Chain Coordination Limited, the contract requires suppliers to hold ISO 9001:2015 and CE Certification to ensure quality and safety standards. Interested parties must submit their responses by December 14, 2026, to be considered for providing these critical surgical technologies and robotic arms.

Supply Chain Coordination Limited

POSTED

DEADLINE

in about 2 months

Hampton Regional Medical Center Replacement MRI "Correction"

Solicitation # SUS108MR

Hampton Regional Medical Center is soliciting proposals for the procurement of a current-generation 1.5T whole-body MRI system. The selected vendor will be responsible for the delivery, installation, integration, testing, and ongoing support of the system, including all necessary coils and software. The scope of work encompasses comprehensive site planning, installation support, system integration, and the provision of training, warranty, and service support. To ensure continuity of patient care, the contract requires the vendor to provide interim mobile MRI coverage during the construction, deinstallation, and installation phases. This solicitation, identified as SUS108MR, is issued by Hampton Regional Medical Center in South Carolina. Interested parties must submit their responses by the deadline of October 30, 2026.

Hampton Regional Medical Center

POSTED

DEADLINE

LIPTM00248 - AFLOAT SUB C4I IPT - Common Submarine Radio Room (CSRR) ISEA ProcurementT (SEWP) (C)The Naval Information Warfare Systems Command, specifically Niwc Atlantic, has issued a forecast for the AFLOAT SUB C4I IPT Common Submarine Radio Room ISEA Procurement. This requirement, identified as LIPTM00248, falls under NAICS code 334510 and is intended to be procured via the SEWP vehicle. The project focuses on ISEA materials and is slated for performance in North Charleston. The procurement is managed by Contracting Officer Jeremy Shull and Secondary Point of Contact Brianna Busby. While the official posted date is listed as October 18, 2026, the action is currently categorized as a forecast to notify potential vendors of the upcoming requirement for submarine radio room capabilities.

POSTED

DEADLINE

LEAD SET, ELECTRODE, ELE

Solicitation # SPE2DS-27-Q-0016

Solicitation SPE2DS-27-Q-0016, issued by the DLA Troop Support Medical Supply Chain, is a request for one ECG 3-lead electrode cable (NSN 6515-01-658-9747). The required item must feature an AAMI configuration with a low profile Propaq MD connector for compatibility with Propaq M and Propaq MD systems, serving as a component for the defibrillator-monitor recorder system (NSN 6515-01-644-9586). Quotations are due by October 21, 2026, and must specify the source and part number being supplied. Delivery is required within 60 days after order, with the shipping destination set as Hill AFB, Utah. The contract mandates strict adherence to commercial packaging standards, requiring each unit to be in a sealed container to prevent damage and shipped in suitable exterior containers. All materials must be marked according to Medical Marking Standard No. 1, which supersedes MIL-STD-129. Administrative requirements include electronic invoicing via the Wide Area Workflow system and compliance with DFARS regulations regarding the safeguarding of covered defense information and the Buy American and Balance of Payments Program. Inspection and acceptance will occur at the destination.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

in about 21 hours

More opportunities from Department Of The Navy → Measurement Science And Engineering Department

Same awarding agency

Radiation Hazard Calibration SupportThe Department of the Navy's Measurement Science and Engineering Department is forecasting a requirement for Radiation Hazard Calibration Support. This project involves the procurement of TEM Cell chambers and an amplifier specifically designed to calibrate radiation hazard probes. The effort is categorized under NAICS code 541380 and is intended to support critical measurement and calibration capabilities. Further details regarding the solicitation and specific performance locations are expected to be released following the forecast date of July 2, 2026.

Testing Laboratories and Services

POSTED

DEADLINE

Mass Comparator with External Draft ShieldThe Department of the Navy, specifically the Measurement Science and Engineering Department, is forecasting the procurement of new mass comparators equipped with external draft shields. This acquisition is intended to provide Navy Calibration laboratories with the necessary equipment to perform in-house calibrations of their Dead Weight tester sets. The requirement is categorized under NAICS code 334516 and was posted as a forecast on July 2, 2026. This initiative aims to enhance the operational independence and technical capabilities of the Navy's calibration facilities.

Analytical Laboratory Instrument Manufacturing

POSTED

DEADLINE

Seal Beach Logistics SupportThe Department of the Navy's Measurement Science And Engineering Department is forecasting a contract for logistics support services at the Type III Laboratory located in Building 5 in Seal Beach, California. This requirement focuses on supporting the repair and calibration of Test and Measurement Diagnostic Equipment for the Navy and Marine Corps, as well as addressing calibration standards that are found to be out of tolerance. This opportunity is categorized under NAICS code 49311 and is intended as an 8(a) Sole Source set-aside. The forecast was posted on July 2, 2026, and is specifically designed to maintain the operational readiness of critical diagnostic equipment through specialized logistics and technical support.

POSTED

DEADLINE

Administrative Support Services to Acquistion Readiness (RA), Measurement Science and Engineering (MS), Range Systems (RS), Performance Assessment (PA), Command Staff (Code 00), and Corporate Operations (Code 10)The Department of the Navy's Measurement Science and Engineering Department is forecasting a contract for administrative support services to benefit several key divisions, including Acquisition Readiness, Measurement Science and Engineering, Range Systems, Performance Assessment, Command Staff, and Corporate Operations. This requirement is designated as an 8(a) set-aside under NAICS code 541330, targeting qualified small businesses for participation. Performance for this contract will be distributed across multiple locations nationwide, including sites in California, South Carolina, Arizona, North Carolina, Florida, Nevada, and Virginia. The forecast was posted on July 2, 2026, to notify potential vendors of the upcoming need for comprehensive administrative assistance across these diverse operational hubs.

Engineering Services

POSTED

DEADLINE

Oscilloscope CalibratorThe Department of the Navy, specifically the Measurement Science And Engineering Department, has issued a forecast for the procurement of an Oscilloscope Calibrator. This high performance benchtop instrument is designed to calibrate a diverse range of frequency meters and oscilloscopes and is intended for deployment across both shore-based and ship-based laboratories. The requirement is categorized under NAICS code 334515 and was posted on July 2, 2026. Interested parties can find further information through the Secretary of the Navy small business portal.

Instrument Manufacturing for Measuring and Testing Electricity and Electrical Signals

POSTED

DEADLINE

High Frequency OscilloscopeThe Department of the Navy, specifically the Measurement Science and Engineering Department, has issued a forecast for a High Frequency Oscilloscope. This procurement is intended to acquire equipment used for the calibration of active oscilloscope calibrator heads. The requirement is categorized under NAICS code 334513. While specific solicitation details and set-aside designations are not yet available, the forecast was posted on July 2, 2026.

Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables

POSTED

DEADLINE

Precision Pressure CalibratorThe Department of the Navy, specifically the Measurement Science and Engineering Department, is forecasting a project for the modernization of existing Precision Pressure Calibrators. This initiative aims to upgrade current equipment to resolve existing logistical limitations and improve overall operational efficiency. The project is categorized under NAICS code 334513 and was posted on July 2, 2026. Further information regarding this requirement can be accessed through the Secretary of the Navy small business portal.

Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables

POSTED

DEADLINE

Mid level multi product calibratorThe Department of the Navy, specifically the Measurement Science and Engineering Department, has issued a forecast for a mid level multi product calibrator. This equipment is intended for the calibration of both handheld and benchtop multi meters with a capacity of up to 6.5 digits. The procurement is categorized under NAICS code 334515 and was posted on July 2, 2026. Interested parties can find further information through the Secretary of the Navy small business portal.

Instrument Manufacturing for Measuring and Testing Electricity and Electrical Signals

POSTED

DEADLINE

General Purpose OscilloscopeThe Department of the Navy, specifically the Measurement Science And Engineering Department, has issued a forecast for the procurement of General Purpose Oscilloscopes. These devices are intended for use in both ship-based and shore-based laboratories to display and analyze the waveforms of electronic signals. The requirement is categorized under NAICS code 334519 and was posted on July 2, 2026. Interested parties can find further information through the Secretary of the Navy small business portal.

Other Measuring and Controlling Device Manufacturing

POSTED

DEADLINE

Measurement Science and Engineering Department Technical and Engineering services.The Measurement Science and Engineering Department of the Department of the Navy is seeking engineering and technical support services to enhance its operational capabilities. The scope of work focuses on three primary technical areas: metrology, the assessment of test and monitoring systems, and comprehensive information technology and information assurance support. These services will be performed in Norco, California, to ensure the precision and security of the department's technical infrastructure. This opportunity is forecasted as a total small business set-aside under NAICS code 541330. It is designed to leverage small business expertise to maintain critical measurement science and engineering standards. Interested parties can find further details through the Secretary of the Navy's small business portal.

Engineering Services

POSTED

DEADLINE

Fiber Optics Benchtop StandardThe Department of the Navy, specifically the Measurement Science and Engineering Department, is forecasting a requirement for Fiber Optics Benchtop Standard services. This contract focuses on providing essential calibration support for Optical Loss Test Sets and Optical Time Domain Reflectometers to ensure measurement accuracy and equipment reliability. Classified under NAICS code 541380, this procurement is intended to maintain high-precision optical testing standards. The forecast was posted on July 2, 2026, and interested parties can find further information through the Secretary of the Navy small business portal.

Testing Laboratories and Services

POSTED

DEADLINE

Lab Benchtop High Precision Pressure CalibratorThe Department of the Navy's Measurement Science And Engineering Department is forecasting the procurement of a Lab Benchtop High Precision Pressure Calibrator. This specialized equipment is intended for use in both ship-based and shore-based laboratories to verify the precision pressure readings of other pressure measurement instruments. The requirement is categorized under NAICS code 334515 and was posted on July 2, 2026. Interested parties can find further information through the Secretary of the Navy's small business portal.

Instrument Manufacturing for Measuring and Testing Electricity and Electrical Signals

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS