Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

This Solicitation opportunity from Iowa was posted on June 15, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

UAV/Drone

Closed
DASIowa-582-RFB-2852-2026State & Local

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 334511
New
Federal
Request for Information (RFI) – Modular Tactical Signals Intelligence (SIGINT) EW System
Solicitation # FA8629-27-R-5005
The United States Air Force Life Cycle Management Center, specifically the Special Warfare Program Office, is conducting market research through a Sources Sought Synopsis and Request for Information under solicitation FA8629-27-R-5005. The government is seeking to identify capable sources for a body-worn, modular tactical Signals Intelligence and Electronic Warfare system characterized by low size, weight, and power. The system must support full spectrum signals prosecution in adverse environments, including the ability to detect, identify, and direction-find threat signals while stationary or on the move. Key technical requirements include interoperability with Android S20TE and S23TE devices, connectivity via mesh networks, and electronic warfare attack capabilities with tunable output power. Objective goals include Mil-STD-810G compliance, operation between -30C and +55C, and support for advanced jamming techniques such as predictive and reactive hop-set jamming. This RFI is for informational purposes only and does not constitute a formal solicitation or a commitment to procure items. Interested respondents must submit a maximum 15-page response by 12:00 PM Eastern time on November 18, 2026. Submissions must include company identification, socioeconomic status, technical capabilities, and a rough order of magnitude cost estimate. The government also requires information regarding the ability to deliver two units within six months of an order and confirmation of compliance with the Buy American Act or Berry Amendment. Additionally, respondents must address compliance with FAR 52.219-14 regarding limitations on subcontracting and FAR 52.219-33 regarding the Non-Manufacturer Rule if the requirement is set aside for small businesses.
FA8629 Aflcmc Wisk Sof/pr

POSTED

about 2 hours ago

DEADLINE

in 21 days
NAICS: 334511
New
Federal
ROTOR TORPEDO
Solicitation # N0010426QNF10
Solicitation N0010426QNF10, issued by the Department of the Navy's NAVSUP Weapon Systems Support Mech, is a total small business set-aside request for quotations for the manufacture of Rotor Torpedoes (NSN 1355-01-561-1348). The scope includes the production of hardware according to Technical Data Package version 009 and specific quality requirements. The government has included an option to increase the order quantity by up to 100 percent. Delivery is required within 405 days on a FOB Destination basis. Award will be granted to the responsible offeror providing the lowest priced technically acceptable offer, with evaluations incorporating the Supplier Performance Risk System to assess item, price, and supplier risk. The contract mandates strict adherence to several military standards, including MIL-STD-129 for marking, MIL-STD-973 for configuration management, and MIL-STD-2073-1 for preservation and packaging. A critical requirement is that all materials must be mercury-free to prevent corrosion and toxicity on submarines and surface ships. Quality systems must comply with ISO 9001, and each unit must be serialized through the Commander Naval Undersea Warfare Center. Administrative requirements include the use of Wide Area Workflow for invoicing and payment, and compliance with DFARS cybersecurity and Buy American regulations.
Navsup Weapon Systems Support Mech

POSTED

about 2 hours ago

DEADLINE

in about 1 month
NAICS: 334511
New
Federal
COMPUTER,FUEL MANAG
Solicitation # N0038327QAA08
Solicitation NO0383-27-Q-AA08, issued by NAVSUP Weapon Systems Support Philadelphia, is a small business set-aside for the teardown, evaluation, repair, overhaul, and modification of Fuel Management Computers (NSN 6610-01-523-8319, P/N 512010-03-01). The primary objective is to return these units to a Ready for Issue (RFI) condition. A critical technical requirement includes the mandatory replacement of all seven transorbs on the internal Fuel Interface Card (PN512023-04-01) as part of standard repair procedures. The contractor is responsible for providing all necessary facilities, labor, materials, and tooling, as the government will not provide manufacturing aids. Specific prohibitions include the use of MIL-W-81381 wire, which must be replaced by SAE-AS22759 series wire. The contract mandates strict adherence to quality and technical standards, including ISO 9001/SAE AS9100 for quality management and ANSI/NCSL Z540.3 or ISO-10012-1 for calibration. Performance is subject to government inspection and acceptance at the origin, with a required delivery timeframe of 90 days FOB Destination. The award will be made to a single responsible offeror based on a determination of the most advantageous offer, with past performance weighted as more important than price. Additional administrative requirements include the use of the Wide Area Workflow (WAWF) system for invoicing and compliance with MIL-STD-2073-1 for packaging and MIL-STD-129 for marking.
Navsup Weapon Systems Support

POSTED

about 2 hours ago

DEADLINE

in 22 days
NAICS: 334511
New
International
Binocular Night Vision Device
Solicitation # 202603695
The Royal Canadian Mounted Police is establishing a National Individual Standing Offer for the supply and delivery of Binocular Night Vision Goggle systems and adjustable iris units to enhance member safety. The requirement includes Generation 2+ and Generation 3 White Phosphorous goggles, as well as adjustable iris units, with initial quantities of 25, 75, and 200 units respectively. The standing offer is valid for two years from the date of issuance, with the possibility of two additional one-year extensions. All goods must be delivered Duty Paid to the RCMP National Warehouse in Ottawa, Ontario, within 60 calendar days of receiving a call-up. Selection is based on the lowest compliant bid following a three-phase evaluation process involving visual, operational, and measurement assessments of samples. Technical requirements include compliance with MIL-STD-810H for drop tests, IEC 60825-1 for laser safety, and specific marking requirements such as permanently affixed metal nameplates with laser-engraved serial numbers and ITAR designations. The contract mandates the use of reusable, returnable, or recyclable packaging in accordance with the Policy on Green Procurement. Suppliers must also provide certifications regarding the absence of forced labour, independent offer determination to prevent collusion, and adherence to the procurement Code of Conduct.
Royal Canadian Mounted Police

POSTED

about 9 hours ago

DEADLINE

in 19 days

AI Contract Overview

Show more

Iowa DPD is soliciting bids for a multi-payload UAV system that must meet strict operational and compliance standards to support mission-critical functions. The drone must be capable of carrying interchangeable payloads including a three-band camera, thermal imager, four-band thermal-RGB camera, or LiDAR, with a quick-change mechanism for rapid swapping. The airframe must be a multi-rotor or VTOL model, not exceed 36 inches in width, and operate for a minimum of 25 minutes with any payload under ambient temperatures from 32 to 122 degrees Fahrenheit with an IP54 rating. It must support GPS, GLONASS, Galileo, and BeiDou positioning with high-accuracy GNSS integration capable of receiving Iowa’s statewide RTK corrections via NTRIP. The controller must be standalone with integrated software and screen, and the system must support operations beyond visual line of sight with a minimum 3-kilometer range. All equipment must be sourced from manufacturers on the DOD Blue List and the UAS Cleared List, and comply with the Buy America Act and Section 889 of the NDAA FY 2019. Four spare battery sets must be included, each with specified runtime and average charging time, to enable prolonged field use without on-site recharging. The system must come with compatible mission planning software such as Pix4D and include on-site training for staff on setup and basic operation, excluding certification or licensing instruction. A detailed list of compatible payloads, their specifications, and individual pricing must be submitted with the bid. The system must allow for future configuration to integrate a LiDAR payload in subsequent years. Submission is due by July 6, 2026, and selection will be based solely on the lowest compliant bid, regardless of enhanced capabilities or perceived value.

General Info

Multi-rotor VTOL UAV under 36 inches, 25-min flight, IP54, four GNSS, RTK, BLOS 3km, DOD Blue List, Buy America, four spare batteries, Pix4D, training, LiDAR-upgradable, lowest compliant bid wins.

Documents

2

582-RFB-2852-2026 UAV/Drone Purchase

PDF, High priority: read this firstrfb
High

CFMO UAV Minimum Specifications

PDF, High priority: read this firstspecifications
High

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseClosed
Posted

Solicitation

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyIowa
Contacts1 person available
OfficeIA
Organization / AgencyIowa
Office AddressIA
Contacts
Philip Payton

Full Description

Show more
Iowa DPD seeks to purchase a UAV/Drone. The following list comprises a minimum specification that the multi-payload UAV unit will need to perform to accomplish our mission. The ideal UAV would be a multi-payload UAV or drone that supports a 3 band camera, thermal, 4 band camera for thermal + RGB, or LiDAR. Camera and/or payloads must be of a quick-change mechanism for swapping payload. A list of individual payloads compatible with UAV would need to be listed with their individual specifications and prices. Minimum Specifications: DOD/DPD requirements must be met including the equipment being purchased from the DOD approved Blue List. A list of acceptable manufacturers can be provided that are presently acceptable on the DOD blue list. Airframe Type: Types include Multi-rotor (Quad/Hex/Octo) or VTOL Operating Dimensions: Max Width 36” Storage Dimensions: Less than or equal to operating dimensions Min FlightTime with payload: 25 min. Max Wind Resistance: N/A IP Rating: 54 Min Operating Temp Range: 32deg F to 122 deg F GNSS Support: GPS, GLONASS, Galileo, and BeiDou support Controller: Must be included and stand alone including software and screen Range: Minimum 3km and be able to operate BVLOS. GPS High Accuracy included must be able to utilize the Iowa Statewide RTK correction signal via the NTRIP broadcasted format. Extra Criteria: - On site orientation training for a small group of individuals on setup and operation of equipment. (Not to include PT 107 or licensing training) - Mission planning software like: Pix4d or compatible mission planning software - 4 sets of battery pack(s) to extend the units operating time in the field x 4 without the need for field charging. Cost to include longest lasting with a listed specification for average charging time. Future Consideration - In subsequent budget years under separate purchase the ability to configure or re-configure this unit to add a future LiDAR payload at a later date. All proposed machines must be in compliance with the Buy America Act and Section 889 of NDAA FY 2019. Additionally, we will only accept products from the manufactures located on the UAS Cleared List. These specifications are meant to represent the minimums that will be accepted by Iowa DPD. Please note that DPD will make their selection souly based on the lowest bidder and product that meets these needs. There may be an instance where a bid presents a product that is quantifyibly better as it relates to quality and value, but in this instnace that will have no bearing on the product chosen as we are unable to make an "apples to apples" comparison. Please reach out if you have any questions regarding these specifications. Issuing Officer: Philip Payton. +1 (555) 000-0000. contact@example.gov

More opportunities from Iowa

Same awarding agency

New
SLED
Rest Area Tiffin East Bound Façade Renovations
Solicitation # 645-DOTRFB-3161-2027
The Iowa Department of Transportation is soliciting bids for the facade renovations of the I-80 East Bound Rest Area near Tiffin, Iowa. The project involves the removal and replacement of the existing surface tile and stucco insulation system with a rain screen fiber cement siding system, as well as the application of cementitious stucco or parging over existing concrete masonry on specific walls. Because the facility will remain occupied during construction, the contractor must manage activities to minimize disruption to the public and DOT staff. All work must adhere to the provided project manual and plans and will be performed under the direct supervision of the Iowa DOT, including periodic site inspections and a requirement for 24-hour advance notice prior to installation. The contract will be awarded by item to the responsible bidder whose submission is most advantageous based on cost, proposed staffing, adherence to the time schedule, and a review of past work performance and capacity. Bids must be submitted via the IMPACS Business Opportunities site by November 17, 2026. The estimated start date is March 2027, depending on weather conditions, with a target completion date of June 30, 2026. Payment terms are set at Net 60, and the bidding process is governed by Iowa Administrative Code 761-20. Davis-Bacon wages do not apply to this project.

POSTED

about 20 hours ago

DEADLINE

in 20 days
View Details
New
SLED
Iowa DOT Repair Shop Annex Overhead Door Tracks
Solicitation # 645-DOTRFQ-3173-2027
Solicitation 645-DOTRFQ-3173-2027 is a request for quotes from the Iowa Department of Transportation for the removal and replacement of overhead door tracks at the Repair Shop Annex. The scope of work includes replacing standard overhead door tracks on doors RA-1, 2, 3, 4, and 7 with galvanized pitch of roof tracks that match the roof angle, replacing torsion springs, and the removal and re-installation of trolley operators. All work must adhere to the approved design and be performed under the direct supervision of the Iowa DOT, with the contractor providing at least 24 hours notice prior to installation for required inspections. Electrical conflicts will be managed by DOT electricians, and deliveries are specified as F.O.B Destination. The contract will be awarded to the responsible bidder whose submission is most advantageous, evaluating cost alongside mandatory requirements, proposed staffing, the ability to meet the time schedule, and past work performance and capacity. Bidders must certify acceptance of ten specific solicitation items and comply with Iowa Administrative Code 761-20. Payment terms are set at net 60 days after delivery of the new door track. This is a tax-exempt procurement, and Davis-Bacon wages do not apply. Responses are due by November 10, 2026, at 1:00 PM CST, with the primary point of contact being Kyle Williams.

POSTED

about 20 hours ago

DEADLINE

in 13 days
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS