Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

UID Marking and Data Matrix Application Services

Active

Federal

Response Deadline08/10/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the application and verification of Unique Item Identification (UID) markings on delivered optical items in full compliance with Department of Defense standards, specifically MIL-STD-130, using 2D Data Matrix symbols. This work is critical to ensure each optical item is uniquely identifiable throughout its lifecycle for defense logistics and inventory management purposes. All markings must be accurately applied, legible, durable, and verifiable to meet military traceability requirements, with quality assurance procedures in place to confirm compliance before delivery. This subcontract is issued under the NAICS code 811219 and is managed by the Naval Surface Warfare Center, Crane Division, within the Department of Defense. The place of performance is located in Crane, Indiana, with a zip code of 47522. The solicitation was posted on July 31, 2026, and responses are due by August 10, 2026, at 7:00 PM Eastern Time. The contract does not specify any set-aside status or small business preferences, and all participants must be prepared to meet rigorous DoD technical specifications without deviation.

General Info

Apply DoD-compliant UID markings per MIL-STD-130 on optical items at Crane, Indiana.

Agency

Department Of Defense → Nswc CraneView Agency

NAICS

811219 - Other Electronic and Precision Equipment Repair and MaintenanceView NAICS

Place of Performance

Crane, IN, 47522, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 31

subcontract

Response DeadlineAug 10

Submission deadline

Response Deadline

08/10/2026, 07:00:00 PM UTCin 8 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Nswc Crane

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Nswc Crane

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Apply and verify DoD-compliant Unique Item Identification (UID) markings using 2D Data Matrix symbols per MIL-STD-130 on delivered optical items.

Similar Contracts

Same NAICS industry code

Tensile Tester Calibration ServicesThe contract requires the annual verification and calibration of six tensile testing machines located at Robins Air Force Base in Warner Robins, Georgia, with a zip code of 31098. All work must adhere strictly to the standards outlined in ASTM E4, E83, E2309, and E2658, ensuring accuracy and compliance with industry best practices. Calibration must be performed using NIST-traceable standards to maintain metrological integrity, and each machine must receive an electronic calibration certificate upon completion. The effort is part of a subcontract under the Department of Defense, managed by FA8571 Maintenance Contracting Afsc Pzim, with a NAICS code of 811219. The solicitation was posted on July 31, 2026, and proposals must be submitted by August 12, 2026, at 4:00 PM. The location of performance is fixed at the Warner Robins facility, and all deliverables must be electronically provided to satisfy contractual obligations.

FA8571 Maintenance Contracting Afsc Pzim

POSTED

DEADLINE

Cryogenic Optical Systems IntegrationThe contract entails hands-on integration, alignment, and verification of optical systems within cleanroom environments under cryogenic conditions, requiring precision technical expertise and strict environmental controls. Work must be performed at the designated location in Pasadena, California, with all activities adhering to the rigorous standards necessary for space-grade optical instrumentation. The effort is part of a subcontract under NASA’s Jet Propulsion Laboratory, supporting mission-critical development for space-based observatories or instrumentation requiring ultra-low temperature operation. The opportunity is open for proposal submission with a response deadline of August 21, 2026, and was posted on July 31, 2026. It falls under NAICS code 811219, which corresponds to other technical and trade schools, indicating a focus on specialized technical services rather than broad manufacturing or supply. There is no set-aside designation, and the contracting office is part of the National Aeronautics and Space Administration, with performance occurring at a JPL-affiliated facility. Proposers must be prepared to demonstrate capability in cryogenic optical assembly, cleanroom protocols, and verification under extreme thermal conditions to meet mission requirements.

NASA Management Office -- Jpl

POSTED

DEADLINE

Unique Item Identification (UII) and Data Matrix MarkingThe contract requires the application of permanent, MIL-STD-130 compliant Data Matrix symbols using ISO/IEC 16022 ECC200 and Format 06 standards to uniquely identify each roller door. This marking must be durable and meet all Department of Defense requirements for item identification, ensuring traceability throughout the item’s lifecycle. The work falls under a Small Business Set Aside, specifically designated as a Total Small Business Set Aside, indicating that only eligible small businesses may compete for this subcontract. The North American Industry Classification System code is 811219, which corresponds to other commercial and industrial machinery and equipment repair and maintenance. The solicitation is issued by the Naval Supply Systems Command Fleet Logistics Center Puget Sound, under the Department of Defense, with a response deadline of August 7, 2026, and a posted date of July 31, 2026. Performance location details are not specified, but the work is expected to support federal defense logistics requirements.

Navsup Flt Logistics Ctr Puget Sound

POSTED

DEADLINE

Critical Safety Item (CSI) Program ManagementThe contract requires the administration of a Critical Safety Item program in strict compliance with DFARS 252.209-7010, focusing on the traceability, configuration control, and quality assurance of components essential to safety-critical systems. This subcontract necessitates robust processes to ensure every part is identifiable throughout its lifecycle, properly configured to meet rigorous aerospace and defense standards, and subjected to continuous quality oversight to prevent failures that could compromise mission safety or personnel welfare. The program must be implemented with precision to meet Department of Defense requirements without deviation. The solicitation is open for response until August 31, 2026, and is issued under the NAICS code 811219, indicating a focus on maintenance and repair services for aviation and aerospace equipment. The contracting activity originates from the Department of Defense through the Ok DLA Aviation office in Oklahoma City, with no set-aside provisions specified, meaning the opportunity is open to all qualified subcontractors regardless of size or socioeconomic status. Performance is expected to support defense operations with no specific location defined, implying potential nationwide or globally distributed responsibilities aligned with DoD supply chain needs.

Ok DLA Aviation At Oklahoma City

POSTED

DEADLINE

On-Site Technical Support & Emergency ResponseThis contract requires a 24-hour on-site technical response service to address mission-critical system failures within pharmacy operations, ensuring minimal downtime through immediate dispatch, rapid diagnosis, and timely repair. The scope demands continuous availability and expertise to restore functionality in high-stakes healthcare environments where system failures directly impact patient care. The work is governed as a subcontract under the NAICS code 811219, issued by the Department of Veterans Affairs through the 256-NETWORK Contract Office 16, with responses due by August 10, 2026. Performance is expected to be delivered at locations serving VA pharmacy systems, though specific geographic details are not provided. The contract emphasizes urgency, reliability, and technical proficiency in maintaining critical infrastructure essential to veteran healthcare services.

256-NETWORK Contract Office 16 (36C256)

POSTED

DEADLINE

Quality Assurance and Inspection ServicesThis contract requires comprehensive quality assurance and inspection services adhering strictly to MIL-STD-1916 or ASQ H1331 standards, utilizing AQL sampling methods with a zero non-conformance acceptance criterion. All inspections, both in-process and final, must ensure absolute conformity to established quality thresholds, leaving no room for defects or deviations. The work is structured as a subcontract under a Total Small Business Set-Aside designation, reserved exclusively for small businesses certified by the SBA, with the NAICS code 811219 indicating repair and maintenance services. The solicitation was posted on July 30, 2026, with responses due by August 14, 2026, and is managed by the Strategic Acquisition Program Directorate within the Department of Defense. Performance location and specific contact details are not provided, but the contract can be accessed via the referenced DIBBS portal.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

Military-Compliant Labeling and BarcodingThe contract mandates the application of durable 2D Data Matrix barcodes and labels adhering to MIL-STD-129 standards for the accurate tracking of National Stock Numbers and lot information on packaged military goods. All labeling must meet strict military durability and readability requirements to ensure reliable identification and logistics tracking throughout the supply chain, from initial packaging through final delivery. The implementation is critical to maintaining compliance with Department of Defense inventory and material management protocols. This is a total small business set-aside subcontract under NAICS code 811219, reserved exclusively for small businesses as defined by the SBA. The solicitation was posted on July 30, 2026, with a response deadline of August 14, 2026, and is managed by the LSO Combat Vehicles and Armament office under the Department of Defense. The place of performance and exact delivery locations are not specified, but the work must be executed in alignment with federal defense logistics standards and submitted through the DIBBS platform linked in the solicitation.

LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

Inspection and Acceptance SupportThis contract requires full compliance with government inspection standards at the destination, where any defect or discrepancy will result in rejection with zero tolerance. All shipments must be meticulously prepared and documented to ensure flawless passage through official inspections, underscoring the critical need for precision in packaging, labeling, and adherence to regulatory protocols. The work falls under NAICS code 811219 and is structured as a subcontract under the Department of Defense’s Land Supply Chain, with performance required at New Cumberland, Pennsylvania, 17070-5002. Responses must be submitted by August 10, 2026, and the solicitation is open for bids through the DIBBS platform. The contract emphasizes strict enforcement of quality control throughout the entire supply and shipment process, leaving no room for error in meeting military or federal inspection requirements. Participants must demonstrate proven capability in handling sensitive logistics under rigorous compliance standards, with failure to meet specifications leading to immediate non-acceptance. Though no set-aside information or point of contact is provided, the place of performance and agency designation confirm the mission-critical nature of the work within the DoD’s logistical framework. Bidders are expected to possess the infrastructure and expertise to guarantee 100 percent readiness for inspection without delays or rework.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Quality Inspection and Government Acceptance SupportThe contract requires comprehensive quality inspection services to verify that all products meet specified technical requirements through first-article and batch inspections, ensuring conformance before delivery. It includes active support for government inspection activities at the point of origin, in strict alignment with Federal Acquisition Regulation 52.246-2, which governs government acceptance of supplies. This work is critical to confirming product reliability and regulatory compliance prior to acceptance by the Department of Defense. This is a subcontract under a Total Small Business Set-Aside, with the NAICS code 811219 indicating it is targeted toward businesses classified under Other Personal and Household Goods Repair and Maintenance. The opportunity was posted on July 30, 2026, with a response deadline of August 14, 2026, and is managed by LSO Combat Vehicles and Armament, a division within the Department of Defense. The performance location is not specified, but all inspection activities must be conducted at the vendor’s origin site to facilitate direct government oversight.

LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

Quality Assurance and Inspection SupportThe contract requires support for internal quality verification processes aligned with MIL-STD-1916 or ASQ H1331 sampling plans to ensure compliance with the Defense Logistics Agency’s zero non-conformance standard for critical and major product attributes. This work focuses on implementing statistically valid inspection methods to detect and prevent defects before products are delivered, with an emphasis on maintaining the highest levels of quality assurance throughout the manufacturing and supply chain processes. The contractor must demonstrate proven expertise in applying these sampling standards to meet stringent military quality requirements. Performances are to be conducted at Robins Air Force Base, Georgia, with a response deadline of August 7, 2026, and the solicitation was posted on July 30, 2026. The contract is structured as a subcontract under NAICS code 811219, which pertains to other industrial and commercial machinery and equipment repair and maintenance. The performing organization falls under the Department of Defense, specifically the ASC Supplier Operations OEM Division, indicating this effort supports defense procurement and logistics initiatives. There is no set-aside designation specified, and all interested parties must submit proposals by the stated deadline to be considered for award.

ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Quality Assurance and Inspection ServicesThe contract entails the implementation and ongoing maintenance of a quality inspection system aligned with AS9003 or ISO 9001 standards to ensure rigorous adherence to aerospace and defense quality requirements. This includes performing comprehensive in-process and final inspections across all relevant production phases to verify compliance with technical specifications and established quality criteria. The contractor must also provide direct support to Government Quality Assurance Representatives (QARs) in accordance with FAR 52.246-11, facilitating oversight activities and ensuring all inspection records, documentation, and corrective actions meet federal contractual obligations. The work is designated as a Service-Disabled Veteran-Owned Small Business Set-Aside under NAICS code 811219 and is structured as a subcontract under the Fluid Handling Division of the Department of Defense. Performance is required to be conducted in San Diego, California, with a response deadline of August 10, 2026, and the solicitation was posted on July 29, 2026. The contractor is expected to demonstrate proven capability in delivering high-integrity inspection services within a regulated defense environment, with a focus on precision, traceability, and collaboration with government oversight entities.

FLUID HANDLING DIVISION

POSTED

DEADLINE

Marking and Bar-Coding ServicesThe contract seeks qualified contractors to apply durable bare-item markings and 2D Data Matrix codes in strict compliance with MIL-STD-129 and RQ017 requirements for the identification of items during shipment and storage. These markings must ensure long-term readability and accuracy across all phases of logistics handling to meet Department of Defense standards for traceability and inventory management. The work is classified as a subcontract under a Total Small Business Set-Aside, exclusively available to small businesses as defined by the SBA, and falls under NAICS code 811219 for other industrial and commercial repair and maintenance services. The solicitation was posted on July 29, 2026, with responses due by August 6, 2026, and the performance location is specifically designated as New Cumberland, Pennsylvania, zip code 17070-5002. The contracting activity is managed by the ASC SUPPLIER OPER OEM DIVISION under the Department of Defense, and the procurement is intended to support military supply chain operations through precise and standardized marking procedures. All bidders must be prepared to demonstrate technical compliance with the referenced military standards and the capacity to deliver consistent, high-quality marking services on schedule.

ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

More opportunities from Department Of Defense → Nswc Crane

Same awarding agency

Cybersecurity Compliance Flow-Down ManagementThe contract requires comprehensive management and verification of Cybersecurity Maturity Model Certification compliance across the subcontractor base to ensure alignment with Department of Defense standards. Responsibilities include developing standardized onboarding checklists to guide subcontractors through compliance requirements, conducting regular audits to validate adherence to CMMC controls, and maintaining detailed, accurate records for reporting to the prime contractor. The work is focused on enforcing cybersecurity flow-down obligations through systematic processes that support accountability and regulatory adherence throughout the supply chain. This effort is directed toward ensuring all subcontractors meet mandated cybersecurity thresholds as outlined under NAICS code 541612, with performance centered at Crane, Indiana, under the oversight of the Naval Surface Warfare Center. The solicitation closes on August 8, 2026, and is structured as a subcontract opportunity with no set-aside designation, targeting firms capable of implementing robust compliance verification protocols in a defense contracting environment. Success requires demonstrated expertise in cybersecurity governance, audit methodology, and documentation systems to meet federal compliance reporting obligations.

Human Resources Consulting Services

POSTED

DEADLINE

Commercial Software License Procurement & DeploymentThe contract involves the procurement and deployment of Ansys Lumerical Multiphysics software licenses, encompassing both new acquisitions and renewals, with full responsibility for license key management, installation support, and coordination with the software vendor. The work requires seamless integration of the software into existing systems, ensuring proper licensing compliance and technical functionality across all authorized users. Services must be delivered in accordance with established timelines and quality standards to support operational needs at the designated performance location in Crane. This subcontract is issued by the Naval Surface Warfare Center Crane under the Department of Defense, classified under NAICS code 423430 for software and computer services. The solicitation was posted on July 31, 2026, with a response deadline of August 8, 2026, and participation is open to qualified vendors capable of managing complex software licensing environments. All deliverables must align with federal procurement requirements and support the defense mission through reliable, secure, and efficiently managed simulation software tools.

Computer and Computer Peripheral Equipment and Software Merchant Wholesalers

POSTED

DEADLINE

CMMC Compliance Implementation & SPRS ReportingThe contract requires the provision of CMMC Level 1 compliance services to ensure adherence to foundational cybersecurity standards for Department of Defense subcontractors. Key deliverables include conducting a comprehensive self-assessment to evaluate current cybersecurity posture, developing a Plan of Action and Milestones to address identified gaps, and submitting the resulting data through the Supplier Performance Risk System. The scope also encompasses verifying that subcontractors downstream meet their respective CMMC compliance flow-down obligations, ensuring end-to-end alignment with required security controls. All activities must be completed in support of NSWC Crane’s mission-critical operations, with performance expected to align with the NAICS code 541611 for management consulting services. The opportunity is posted as a subcontract and requires responses by August 8, 2026, with performance primarily centered at Crane, Indiana.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

UID Marking and Compliance Data SubmissionThe contract requires the application of permanent UID markings in full compliance with MIL-STD-130 standards, including the generation of accurate UID labels for items under the agreement. All markings must be durable, legible, and conform to Department of Defense specifications for item identification. In addition to physical labeling, the contractor is responsible for submitting the complete and accurate UID data to the Web-Enabled Supply Chain Management System and the Supplier Performance Risk System, ensuring timely and error-free data transmission. The contractor must also maintain and document their CMMC compliance status as part of the submission process, verifying adherence to cybersecurity requirements necessary for handling controlled unclassified information. All work is to be performed at the designated performance location in Crane, Indiana, with the facility operating under the oversight of the Naval Surface Warfare Center Crane Division. This is a subcontract opportunity under the NAICS code 541611, which pertains to management consulting services, indicating technical and administrative support for compliance and data systems rather than direct manufacturing. The solicitation was posted on July 31, 2026, with responses due by August 10, 2026, at 7:00 PM Eastern Time, leaving a narrow window for submission. While no set-aside designation is specified, the contract is tied to a Department of Defense agency and requires strict adherence to federal security and reporting protocols. The offeror must ensure full alignment with DoD data submission standards and maintain active CMMC certification throughout the contract period to remain eligible for payment and future award considerations.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

Operator Training for ProtoTRAK RMX CNC SystemThe contract is for hands-on training to be provided to personnel at NSWC Crane on the operation, programming, and maintenance of the ProtoTRAK RMX CNC control system. The training must be delivered in person at the Crane, Indiana location and is intended to ensure that naval personnel gain practical proficiency with this specific CNC system. This subcontract opportunity is classified under NAICS code 611519, which pertains to other schools and instruction, and is part of a Department of Defense initiative to enhance technical workforce capabilities. The solicitation was posted on July 31, 2026, with a firm deadline for responses on August 10, 2026, at 7:00 p.m. Eastern Time. There is no set-aside designation specified, and no point of contact information is provided in the posted details. All work must be performed at the crane facility, with no remote or virtual alternatives permitted.

Other Technical and Trade Schools

POSTED

DEADLINE

Installation and Commissioning Services for CNC Bed MillThe contract encompasses the full installation and commissioning of a TRAK DPMRX5 Bed Mill at NSWC Crane, Indiana, requiring on-site execution of all critical setup tasks including mechanical leveling, electrical power connection, software configuration, precision calibration, and comprehensive operational testing to ensure the machine meets performance specifications. The work must be completed at the designated federal facility with strict adherence to technical and safety protocols inherent to Department of Defense operations. The solicitation, classified as a subcontract under NAICS code 811212, is open for responses until August 10, 2026, with a posting date of July 31, 2026, indicating a competitive procurement timeline managed by the Navy’s Naval Surface Warfare Center. All activities are confined to the Crane, Indiana location with a ZIP code of 47522, and participation requires the capability to perform complex CNC equipment commissioning within a secured government environment, with no set-aside designation specified.

Computer and Office Machine Repair and Maintenance

POSTED

DEADLINE

Supply and Delivery of TRAK DPMRX5 Bed Mill with ProtoTRAK RMX CNCThe contract requires the procurement, configuration, and delivery of one TRAK DPMRX5 Bed Mill equipped with the ProtoTRAK RMX CNC control system, including all necessary software and tooling accessories to ensure full operational capability. The equipment must be fully compliant with federal marking and reporting standards, ensuring traceability and adherence to defense procurement regulations. The system is intended for use at the Naval Surface Warfare Center Crane location in Indiana, with a delivery timeline aligned to the response deadline of August 10, 2026. The contract falls under the NAICS code 333517 for metalworking machinery manufacturing and is categorized as a subcontract under the Department of Defense, specifically managed by NSWC Crane. All deliverables must meet exacting military specifications and be ready for immediate integration into existing production or testing environments upon receipt.

Machine Tool Manufacturing

POSTED

DEADLINE

CMMC Compliance and Cybersecurity SupportThis contract provides comprehensive cybersecurity support to achieve CMMC Level 1 or 2 compliance for both prime contractors and subcontractors, with a focus on executing NIST SP 800-171 self-assessments, submitting System for Award Management (SAM) Performance Reporting System (SPRS) data, and developing Plans of Action and Milestones to address identified security gaps. The effort is specifically tailored to meet the Department of Defense's cybersecurity requirements and must be performed by a small business set aside under NAICS code 541611, which classifies it as management, scientific, and technical consulting services. Performance will be centered at Crane, Indiana, with a target zip code of 47522, and the contract is structured as a subcontract under the Naval Surface Warfare Center, Crane Division. Interested parties must submit responses by August 14, 2026, with the solicitation publicly listed on SAM.gov and open to eligible small businesses seeking to support defense cybersecurity compliance efforts.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

Military-Compliant Packaging and Labeling ServicesThe contract requires the packaging and labeling of engineering plastic rods and shipping containers in full compliance with MIL-STD-129 standards, including the application of AI-coded barcodes, serialized product labels, and specific handling markings to ensure traceability and military readiness. All work must adhere to strict defense logistics protocols, with an emphasis on accuracy, durability, and uniformity across all labeled items and containers to support DoD supply chain operations. The deliverables are intended for performance at Crane, Indiana, with a zip code of 47522, and the contract is set aside exclusively for small businesses under the SBA’s Total Small Business Set Aside category, classified under NAICS code 561910 for other support services. The solicitation remains open until August 14, 2026, at 8:00 PM Eastern Time, with the opportunity posted on SAM.gov on July 31, 2026. The award will be made under a subcontract structure, and the contracting activity is managed by the Naval Surface Warfare Center, Crane Division, under the Department of Defense. While no point of contact is listed, interested parties must submit proposals through the official SAM.gov portal to be considered. Compliance with all labeling and packaging specifications is mandatory, and failure to meet MIL-STD-129 requirements will result in rejection of deliverables, regardless of other qualifications.

Packaging and Labeling Services

POSTED

DEADLINE

UID Marking and Data Submission ServicesThis contract requires the permanent marking of plastic rods with 2D Data Matrix symbols in full compliance with MIL-STD-130 standards, ensuring each item is uniquely identifiable throughout its lifecycle. The marking must include accurate and legible data such as the CAGE code, serial number, and part number, which must be submitted to either the WAWF system or the Department of Defense’s IUID registry to maintain accurate tracking and inventory control. The work is classified as a subcontract under a Small Business Set Aside, with the NAICS code 541330 indicating it involves professional, scientific, and technical services related to engineering and technical consulting. Performance is to be carried out at Crane, Indiana, with the Department of Defense through NSWC Crane as the overseeing agency, and all deliverables are subject to strict federal compliance requirements for defense logistics and asset management. The solicitation was posted on July 31, 2026, with a firm response deadline of August 14, 2026, giving interested small businesses a limited window to submit proposals. Only entities classified as small businesses under SBA guidelines are eligible to respond, reinforcing the emphasis on supporting small business participation in defense contracting. The place of performance is fixed at Crane, and while the full office address details are not specified, the location indicates the work supports logistics and systems needs tied to the Crane naval facility. Successful contractors must ensure both the physical marking quality and the timely, error-free data submission to meet military accountability standards, making technical precision and regulatory adherence critical to contract fulfillment.

Engineering Services

POSTED

DEADLINE

Supply of High-Performance Engineering Plastic RodsThe contract seeks the supply of twenty units of NORYL RODs in SE1-GFN3 grade, each with a 5-inch diameter and 30 percent glass-filled composition, to be precision-cut into four-foot sections totaling eighty feet of finished material. The product must fully comply with military specifications to ensure suitability for high-performance applications under demanding conditions. This subcontract is designated as a Small Business Set Aside under the SBA program, indicating exclusive eligibility for small businesses to bid. The North American Industry Classification System code 325211 identifies the work within the plastics material and resin manufacturing sector. The performance location is specified as Crane, Indiana, with a zip code of 47522, and the contracting activity is managed by the Naval Surface Warfare Center, Crane Division, under the Department of Defense. Bids must be submitted by August 14, 2026, at 8:00 PM Eastern Time, following the solicitation posted on July 31, 2026.

Plastics Material and Resin Manufacturing

POSTED

DEADLINE

User Manuals and Technical Guides (CDRL A005)The contract titled User Manuals and Technical Guides CDRL A005 requires the development of comprehensive end-user documentation including user manuals installation guides and technical guides to support defense systems operated by the Department of Defense at NSWC Crane. This subcontract is classified under NAICS code 541921 which pertains to other technical and trade services and carries a response deadline of August 3 2026 at 5:00 PM with the solicitation posted on July 31 2026. The performance location is specified as Crane Indiana with a ZIP code of 47522 and the work must deliver accurate clear and usable documentation tailored for end users of military equipment. All deliverables must align with federal technical documentation standards and be produced within the defined timeframe to meet program requirements.

Photography Studios, Portrait

POSTED

DEADLINE